Influence of surface properties of polymeric nanoparticles on their membrane affinity

Interfacial Behavior of Biodegradable Poly(lactic-co-glycolic acid)-Pluronic F127 Nanoparticles and Its Impact on Pickering Emulsion Stability

Biodegradable nanoparticle-based emulsions exhibit immense potential in various applications, particularly in the pharmaceutical, cosmetic, and food industries. This study delves into the intricate interfacial behavior of Pluronic F127 modified poly(lactic-co-glycolic acid) (PLGA-F127) nanoparticles, a crucial determinant of their ability to stabilize Pickering emulsions. Employing a combination of Langmuir balance, surface tension, and diffusion coefficient measurements, we investigate the interfacial dynamics of PLGA-F127 nanoparticles under varying temperature and ionic strength conditions. Theoretical calculations are employed to elucidate the underlying mechanisms governing these phenomena. Our findings reveal a profound influence of temperature-dependent Pluronic layer behavior and electrostatic and steric interactions on the interfacial dynamics. Nonlinear changes in surface tension are observed, reflecting the interplay of these factors. Particle aggregation is found to be prevalent at elevated temperatures and ionic strengths, compromising the stability and emulsification efficiency of the formed emulsions. This work provides insights into the rational design of stable and efficient biodegradable nanoparticle-based Pickering emulsions, broadening their potential applications in various fields.

Membrane-Based In Situ Mid-Infrared Spectroscopic Ellipsometry: A Study on the Membrane Affinity of Polylactide-co-glycolide Nanoparticulate Systems

Mid-infrared (IR) ellipsometry of thin films and molecule layers at solid–liquid interfaces has been a challenge because of the absorption of light in water. It has been usually overcome by using configurations utilizing illumination through the solid substrate. However, the access to the solid–liquid interface in a broad spectral range is also challenging due to the limited transparency of most structural materials in the IR wavelength range. In this work, we propose a concept of a microfabricated analysis cell based on an IR-transparent Si membrane with advantages of a robust design, flexible adaptation to existing equipment, small volume, multiple-angle capabilities, broad wavelength range, and opportunities of multilayer applications for adjusted ranges of high sensitivity. The chamber was prepared by 3D micromachining technology utilizing deep reactive ion etching of a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resulting in a cell volume of approximately 50 μL. The mechanical stability of the 2 and 5 μm-thick membranes was tested using different “backbone” reinforcement structures. It was proved that the 5 μm-thick membranes are stable at lateral cell sizes of 5 mm by 20 mm. The cell provides good intensity and adjustment capabilities on the stage of a commercial mid-IR ellipsometer. The membrane configuration also provides optical access to the sensing interfaces at a broad range of incident angles, which is a significant advantage in many potential sensing structure configurations, such as plasmonic, multilayer, 2D, or metamaterial applications.

Drug Conjugation Induced Modulation of Structural and Membrane Interaction Features of Cationic Cell-Permeable Peptides

Cell-penetrating peptides might have great potential for enhancing the therapeutic effect of drug molecules against such dangerous pathogens as Mycobacterium tuberculosis (Mtb), which causes a major health problem worldwide. A set of cationic cell-penetration peptides with various hydrophobicity were selected and synthesized as drug carrier of isoniazid (INH), a first-line antibacterial agent against tuberculosis. Molecular interactions between the peptides and their INH-conjugates with cell-membrane-forming lipid layers composed of DPPC and mycolic acid (a characteristic component of Mtb cell wall) were evaluated, using the Langmuir balance technique. Secondary structure of the INH conjugates was analyzed and compared to that of the native peptides by circular dichroism spectroscopic experiments performed in aqueous and membrane mimetic environment. A correlation was found between the conjugation induced conformational and membrane affinity changes of the INH-peptide conjugates. The degree and mode of interaction were also characterized by AFM imaging of penetrated lipid layers. In vitro biological evaluation was performed with Penetratin and Transportan conjugates. Results showed similar internalization rate into EBC-1 human squamous cell carcinoma, but markedly different subcellular localization and activity on intracellular Mtb.

Chemical structure and in vitro cellular uptake of luminescent carbon quantum dots prepared by solvothermal and microwave assisted techniques

Carbon quantum dots (CQDs) are a novel family of fluorescent materials that could be employed as non-toxic alternatives to molecular fluorescent dyes in biological research and also in medicine. Four different preparation approaches, including microwave assisted heating and solvent refluxing, were explored. In addition to the widely used microwave assisted methods, a simple convenient new procedure is presented here for the particle synthesis. A detailed X-ray photoelectron spectroscopic (XPS) analysis was employed to characterize the composition, and more importantly, the chemical structure of the CQD samples and the interrelation of the characteristic surface chemical groups with the fluorescence properties and with surface polarity was unambiguously established. In vitro cellular internalization experiments documented their applicability as fluorescence labels while non-toxic properties were also approved. It was demonstrated that the adequate water-dispersibility of the particles plays a crucial role in their biological application. The synthetized CQD samples turned to be promising for cellular imaging applications both in laser illuminated flow cytometric measurements and in fluorescence microscopy.

Surface Layer Modification of Poly(d,l-lactic- co-glycolic acid) Nanoparticles with Targeting Peptide: A Convenient Synthetic Route for Pluronic F127-Tuftsin Conjugate

Nanoparticles consisting of biodegradable poly(d,l-lactic- co-glycolic acid) (PLGA) are promising carriers for drug molecules to improve the treatment of tuberculosis. Surface modifiers, such as Pluronic F127, are essential for biocompatibility and for the protection against particle aggregation. This study demonstrates a successful approach to conjugate Pluronic F127 coated PLGA nanoparticles with Tuftsin, which has been reported as a macrophage-targeting peptide. Transformation of Pluronic F127 hydroxyl groups-which have limited reactivity-into aldehyde groups provide a convenient way to bind aminooxy-peptide derivatives in a one-step reaction. We have also investigated that this change has no effect on the physicochemical properties of the nanoparticles. Our data showed that coating nanoparticles with Pluronic-Tuftsin conjugate markedly increased the internalization rate and the intracellular activity of the encapsulated drug candidate against Mycobacterium tuberculosis. By employing this approach, a large variety of peptide targeted PLGA nanoparticles can be designed for drug delivery.

Surface Activity of Poly(ethylene glycol)-Coated Silver Nanoparticles in the Presence of a Lipid Monolayer

We have investigated the surface activity of poly(ethylene glycol) (PEG)-coated silver nanoparticles (Ag-PEG) in the presence or absence of lipid monolayers comprised of monounsaturated dioleoylphosphocholine and dioleoylphosphoglycerol (DOPC/DOPG; 1:1 mol ratio). Dynamic measurements of surface pressure demonstrated that Ag-PEG were surface-active at the air/water interface. Surface excess concentrations suggested that at high Ag-PEG subphase concentrations, Ag-PEG assembled as densely packed monolayers in the presence and absence of a lipid monolayer. The presence of a lipid monolayer led to only a slight decrease in the excess surface concentration of Ag-PEG. Surface pressure-area isotherms showed that in the absence of lipids Ag-PEG increased the surface pressure up to 45 mN m^-1 upon compression before the Ag-PEG surface layer collapsed. Our results suggest that surface activity of Ag-PEG was due to hydrophobic interactions imparted by a combination of the amphiphilic polymer coating and the hydrophobic dodecanethiol ligands bound to the Ag-PEG surface. With lipid present, Ag-PEG + lipid surface pressure-area (π-A) isotherms reflected Ag-PEG incorporation within the lipid monolayers. At high Ag-PEG concentrations, the π-A isotherms of the Ag-PEG + lipid films closely resembled that of Ag-PEG alone with a minimal contribution from the lipids present. Analysis of the subphase silver (Ag) and phosphorus (P) concentrations revealed that most of the adsorbed material remained at the air/lipid/water interface and was not forced into the aqueous subphase upon compression, confirming the presence of a composite Ag-PEG + lipid film. While interactions between "water-soluble" nanoparticles and lipids are often considered to be dominated by electrostatic interactions, these results provide further evidence that the amphiphilic character of a nanoparticle coating can also play a significant role.

Interaction of poly(lactic-co-glycolic acid) nanoparticles at fluid interfaces

HYPOTHESIS

Adsorption and localization of nanoparticles at fluid interfaces are key factors in processes like transport through membranes or emulsion stabilization. Adsorption of poly(lactic-co-glycolic acid) (PLGA) and Pluronic coated PLGA nanoparticles (NPs) were studied at three different fluid interfaces. The effect of particle surface modification and type of interface was investigated with the aim of fine tuning interfacial interaction of the nanoparticles.

EXPERIMENTS

Surface tension measurements were carried out to determine the surface activity and adsorption kinetics of the particles. Particles layers at the air/water interface were further studied using the Langmuir balance technique by recording the surface pressure-area isotherms. Interfacial rheological measurements were performed to characterize the structural properties of the nanoparticle interfacial films.

FINDINGS

Interfacial adsorption and its kinetics were explained by the diffusion controlled adsorption theory and considering the energy barrier of particle transport to the interface. Surface modification by Pluronic increased the interfacial activity of nanoparticles at all interfaces. Surface activity of PLGA-Pluronic particles could be described by the contributions of both the PLGA NPs and the effective portion of their Pluronic shell. Both particle films present mainly elastic dilatational properties suggesting that particles are in kinetically separated state.

Amphiphilic hyperbranched polyglycerols in a new role as highly efficient multifunctional surface active stabilizers for poly(lactic/glycolic acid) nanoparticles

Amphiphilic hyperbranched polyglycerols synthesized with alkyl alcohol initiators are efficient surfactants and stabilizers for poly(lactic/glycolic acid) nanoparticles, which offer various new possibilities for surface functionalized nanosystems.