Remote activation by green-light irradiation of shape memory epoxies containing gold nanoparticles

Effect of Gold Nanoparticles on the Physical Properties of an Epoxy Resin

The effect of doping the bisphenol A diglycidyl ether (DGEBA)/m-xylylenediamine (mXDA) system with gold nanoparticles (AuNP) has been studied with differential scanning calorimetry (DSC), thermogravimetric analysis, dynamic mechanical analysis (DMA), and dielectric analysis (DEA). The evolved heat (ΔHt), the glass transition temperature (Tg), and the associated activation energies of this relaxation process have been determined. Below a certain concentration of AuNPs (=8.5%, in mg AuNP/g epoxy matrix), Tg decreases linearly with the concentration of AuNPs, but above it, Tg is not affected. The degree of conversion α of this epoxy system was analyzed by the semiempirical Kamal’s model, evidencing that diffusion correction is required at high values of α. Activation energy values suggest that AuNPs can cause some impediments at the beginning of the crosslinking process (n-order mechanism). The slight difference between the initial decomposition temperature, as well as the temperature for which the degradation rate is at a maximum, for both systems can be accepted to be within experimental error. Mechanical properties (tension, compression, and bending tests) are not affected by the presence of AuNPs. Dielectric measurements show the existence of a second Tg at high temperatures, which was analyzed using the Tsagarapoulos and Eisenberg model of the mobility restrictions of network chains bound to the filler.

Importance of the Structural and Physicochemical Properties of Silica Nanoshells in the Photothermal Effect of Silica-Coated Au Nanoparticles Suspensions

In this work, monodisperse silica-coated gold nanoparticles (NPs) were synthesized and used for obtaining aqueous colloidal dispersions with an optimum relationship between colloidal stability and photothermal activity. The idea behind this design was to produce systems with the advantages of the presence of a silica shell (biocompatibility, potential for surface modification, and protecting effect) with a minimal loss of optical and thermal properties. With this aim, the photothermal properties of NPs with silica shells of different thicknesses were analyzed under conditions of high radiation extinction. By using amorphous, gel-like silica coatings, thicknesses higher than 40 nm could be obtained without an important loss of the light absorption capacity of the colloids and with a significant photothermal response even at low NP concentrations. The effects produced by changes in the solvent and in the NP concentration were also analyzed. The results show that the characteristics of the shell control both, the photothermal effect and the optical properties of the colloidal dispersions. As the presence of a silica shell strongly enhances the possibilities of adding cargo molecules or probes, these colloids can be considered of high interest for biomedical therapies, sensing applications, remote actuation, and other technological applications.

Tuning the Photothermal Effect of Carboxylated-Coated Silver Nanoparticles through pH-Induced Reversible Aggregation

The photothermal response of mercaptoundecanoic acid (MUA)-coated Ag nanoparticles (Ag@MUA NPs) in both aqueous dispersions and paper substrates was determined as a function of pH when irradiated with a green laser or a blue LED source. Aqueous dispersions of Ag@MUA NPs showed an aggregation behavior by acidification that was used for the formation of NPs clusters of variable sizes. Aggregation was induced by changing the pH across the apparent pK_a of the acid, higher than the pK_a of the free acid. Formation of these aggregates was completely reversible allowing the return to the well-dispersed initial state by simply increasing the pH by the addition of a base. Aggregation produced a shift of the plasmon band that changed the spectra of the dispersions and their ability to be remotely heated when irradiated with visible light. These aggregates could be transferred to paper by simple impregnation of the substrates with the dispersion. On the solid substrate, a higher photothermal response than in the liquid medium was observed. A high local increase of up to 75 °C could be recorded on paper after only 30 s of irradiation with a green laser, whereas a blue LED array was enough for inducing the melting of a solid paraffin (T_m = 36-38 °C) deposited on it. This work demonstrates that photothermal heating can be controlled by the reversible aggregation of NPs to induce different thermal responses in liquid and solid media.

Dielectric and Resistive Heating of Polymeric Media: Toward Remote Thermal Activation of Stimuli-Responsive Soft Materials

Stimuli-responsive soft materials are becoming increasingly important in a wide range of contemporary technologies, and methods by which to promote thermal stimulation remotely are of considerable interest for controllable device deployment, particularly in inaccessible environments such as outer space. Until now, remote thermal stimulation of responsive polymers has relied extensively on the use of nanocomposites wherein embedded nanoparticles/structures are selectively targeted for heating purposes. In this study, an alternative remote-heating mechanism demonstrates that the dielectric and resistive thermal losses introduced upon application of an alternating current generate sufficient heat to raise the temperature of a neat polyimide by over 70 °C within ≈10 s. Thermal imaging is used here to measure current-induced temperature changes of polymeric media, and a proposed analytical model yields predictions that compare reasonably well with experimental data, confirming that such remote heating is viable. Conditions permitting a shape-memory polymer possessing a melting transition and susceptible to dielectric actuation to achieve continuous electrostrain-temperature cycling are identified.

Entanglement-Based Thermoplastic Shape Memory Polymeric Particles with Photothermal Actuation for Biomedical Applications

Triggering shape-memory functionality under clinical hyperthermia temperatures could enable the control and actuation of shape-memory systems in clinical practice. For this purpose, we developed light-inducible shape-memory microparticles composed of a poly(d,l-lactic acid) (PDLLA) matrix encapsulating gold nanoparticles (Au@PDLLA hybrid microparticles). This shape-memory polymeric system for the first time demonstrates the capability of maintaining an anisotropic shape at body temperature with triggered shape-memory effect back to a spherical shape at a narrow temperature range above body temperature with a proper shape recovery speed (37 < T < 45 °C). We applied a modified film-stretching processing method with carefully controlled stretching temperature to enable shape memory and anisotropy in these micron-sized particles. Accordingly, we achieved purely entanglement-based shape-memory response without chemical cross-links in the miniaturized shape-memory system. Furthermore, these shape-memory microparticles exhibited light-induced spatiotemporal control of their shape recovery using a laser to trigger the photothermal heating of doped gold nanoparticles. This shape-memory system is composed of biocompatible components and exhibits spatiotemporal controllability of its properties, demonstrating a potential for various biomedical applications, such as tuning macrophage phagocytosis as demonstrated in this study.

Shape memory epoxy vitrimers based on DGEBA crosslinked with dicarboxylic acids and their blends with citric acid

The shape of epoxy–acid based vitrimers can be changed either temporarily or permanently by selecting the appropriate thermal treatment.