Biotinylated N-palmitoyl chitosan for design of drug loaded self-assembled nanocarriers

Investigation of Roughness, Morphology, and Wettability Characteristics of Biopolymer Composite Coating on SS 316L for Biomedical Applications

This project aims to create a 316L stainless steel coated with a biocomposite based on chitosan for use in the biomedical industry. To completely coat the material, the dip-coating technique was used to apply plain chitosan, chitosan nanosilver, chitosan biotin, and chitosan-nanosilver-biotin in that order. This coating's surface morphology was investigated with field emission scanning electron microscopy (FESEM). Surface roughness, average size distribution, and 2D and 3D surface tomography were all investigated using scanning probe microscopy and atomic force microscopy (SPM and AFM). The Fourier transform infrared (FTIR) spectroscopy technique was used to quantify changes in functional groups. To evaluate the coated samples' wettability, contact angle measurements were also performed. The chitosan (CS) + nanosilver, CS + biotin, and CS + biotin + nanosilver-coated 316L stainless steel showed roughness values of about 8.68, 4.21, and 3.3 nm, respectively, compared with the neat chitosan coating, which exhibits 12 nm roughness, indicating a strong effect of biotin and nanosilver on surface topography whereas the coating layers were homogenous, measuring around 33 nm in thickness. For CS + nanosilver and CS + biotin, the average size of agglomerates was approximately 444 nm and 355 nm, respectively. The coatings showed adequate wettability for biomedical applications, were homogeneous, and had no cracks. Their contact angles were around 51-75 degrees. All of these results point to the composite coating's intriguing potential for use in biological applications.

Design and Synthesis of Amphiphilic Graft Polyphosphazene Micelles for Docetaxel Delivery

The structural versatility of polydichlorophosphazene derived from the inestimable possibilities to functionalize the two halogens, attached to each phosphazene main chain unit, attracted increasing attention in the last decade. This uncountable chemical derivatization is doubled by the amphiphilic roleplay demonstrated by polyphosphazenes containing twofold side-chained hydrophilic and hydrophobic moieties. Thus, it is able to encapsulate specific bioactive molecules for various targeted nanomedicine applications. A new amphiphilic graft, polyphosphazenes (PPP/PEG-NH/Hys/MAB), was synthesized via the thermal ring-opening polymerization of hexachlorocyclotriphosphazene, followed by a subsequent two-step substitution reaction of chlorine atoms with hydrophilic methoxypolyethylene glycol amine/histamine dihydrochloride adduct (PEG-NH₂)/(Hys) and hydrophobic methyl-p-aminobenzoate (MAB), respectively. Fourier transform infrared spectroscopy (FTIR) and ¹H and ³¹P-nuclear magnetic resonance spectroscopy (NMR) have been used to validate the expected architectural assembly of the copolymer. Docetaxel loaded micelles based on synthesized PPP/PEG-NH/Hys/MAB were designed by dialysis method. The micelles size was evaluated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The drug release profiles from the PPP/PEG-NH/Hys/MAB micelles were established. In vitro cytotoxicity tests of PPP/PEG-NH/Hys/MAB micelles loaded with Docetaxel revealed that designed polymeric micelles exhibited an increased cytotoxic effect on MCF-7 cells.

Insights on Some Polysaccharide Gel Type Materials and Their Structural Peculiarities

Global resources have to be used in responsible ways to ensure the world's future need for advanced materials. Ecologically friendly functional materials based on biopolymers can be successfully obtained from renewable resources, and the most prominent example is cellulose, the well-known most abundant polysaccharide which is usually isolated from highly available biomass (wood and wooden waste, annual plants, cotton, etc.). Many other polysaccharides originating from various natural resources (plants, insects, algae, bacteria) proved to be valuable and versatile starting biopolymers for a wide array of materials with tunable properties, able to respond to different societal demands. Polysaccharides properties vary depending on various factors (origin, harvesting, storage and transportation, strategy of further modification), but they can be processed into materials with high added value, as in the case of gels. Modern approaches have been employed to prepare (e.g., the use of ionic liquids as "green solvents") and characterize (NMR and FTIR spectroscopy, X ray diffraction spectrometry, DSC, electronic and atomic force microscopy, optical rotation, circular dichroism, rheological investigations, computer modelling and optimization) polysaccharide gels. In the present paper, some of the most widely used polysaccharide gels will be briefly reviewed with emphasis on their structural peculiarities under various conditions.

Design and fabrication of chitosan-based AIE active micelles for bioimaging and intelligent delivery of paclitaxel

In this study, cetyl 4-formylbenzoate alkyl and 4-(2-hydroxyethoxy) benzophenonesalicylaldazide modified biotinylated chitosan (CS-BT-HBS-CB) featured with aggregation-induced emission (AIE) characteristic, active tumor-targeting ability and pH-responsive drug release property was designed and synthesized. The polymer was fabricated by introducing hydrophobic segment, tumor targeting ligand, acid-sensitive bond and AIE fluorophore to the backbone of chitosan. Due to its amphiphilicity, the polymer could self-assemble into micelles and encapsulate paclitaxel (PTX) to form PTX-loaded CS-BT-HBS-CB micelles. The mean size of the micelles was 167 nm, which was beneficial to the EPR effect. Moreover, with the help of above functional groups, the micelles exhibited excellent AIE effect, triggered drug release behavior by acidic condition, selective internalization by MCF-7 cells and excellent cellular imaging capability. In vivo studies revealed that the PTX-loaded CS-BT-HBS-CB micelles could enhance the antitumor efficacy with low systemic toxicity. This micellar system would be a potential candidate for cancer therapy and bioimaging.

A novel modified chitosan/collagen coated-gold nanoparticles for 5-fluorouracil delivery: Synthesis, characterization, in vitro drug release studies, anti-inflammatory activity and in vitro cytotoxicity assay

We report herein the development of the novel nanohybrids of gold nanoparticles reduced/stabilized/coated with collagen (AuNPs@collagen) in the first layer and subsequently modified with biotin-quat188-chitosan (Bi-QCS) in the outer layer for 5-fluorouracil (5-FU) delivery to improve cellular uptake and promote specific cell targeting of the nanocarrier. The fabrication of the layer-by-layer technique on the surface of gold nanoparticles (AuNPs) can overcome the limitation of poor drug loading capacity of the classic AuNPs from 64.67% to 87.46%. The AuNPs@collagen coated by the Bi-QCS exhibits strong electrostatic interactions between drug anion (5-FU) and amine groups of the modified chitosan as well as hydrogen bonding. Furthermore, the Bi-QCS-AuNPs@collagen demonstrated a significantly higher anti-inflammatory activity in RAW264.7 macrophage cell line. The Bi-QCS-AuNPs@collagen enhanced the activity of 5-FU approximately 3.3-fold (HeLa) and 6.2-fold (A549), compared to the free 5-Fluorouracil. According to these results, it is very promising that Bi-QCS-AuNPs@collagen can be used as an effective drug delivery carrier in the future.

Biotinylated chitosan macromolecule based nanosystems: A review from chemical design to biological targets

World Health Organization estimates that 30-50% of cancers are preventable by healthy lifestyle choices, early detection and adequate therapy. When the conventional therapeutic strategies are still regulated by the lack of selectivity, multidrug resistance and severe toxic side effects, nanotechnology grants a new frontier for cancer management since it targets cancer cells and spares healthy tissues. This review highlights recent studies using biotin molecule combined with functional nanomaterials used in biomedical applications, with a particular attention on biotinylated chitosan-based nanosystems. Succinctly, this review focuses on five areas of recent advances in biotin engineering: (a) biotin features, (b) biotinylation approaches, (c) biotin functionalized chitosan based nanosystems for drug and gene delivery functions, (d) diagnostic and theranostic perspectives, and (e) author's inputs to the biotin-chitosan based tumour-targeting drug delivery structures. Precisely engineered biotinylated-chitosan macromolecules shaped into nanosystems are anticipated to emerge as next-generation platforms for treatment and molecular imaging modalities applications.

Assessment of Exenatide loaded Biotinylated Trimethylated Chitosan/HP-55 Nanoparticles

BACKGROUND

Exenatide (EXE) is an anti-hyperglycemic agent approved for treating type 2 diabetes by the Food and Drug Administration (FDA). However, twice-daily injection of exenatide inconveniences most patients.

OBJECTIVE

In this study, biotinylated trimethylated chitosan (Bio-TMC) based nanoparticles were proposed to promote oral absorption of exenatide. Realizing the oral administration of exenatide is very important to alleviate patient suffering and improve patient compliance.

METHODS

Bio-TMC was synthesized, and the chemical structure was characterized by Fourier transform infrared (FT-IR) spectroscopy and 1H NMR spectroscopy. Nanoparticles were prepared through polyelectrolyte interaction in the presence of sodium tripolyphosphate (TPP) and Hydroxypropyl methylcellulose phthalate (HP-55). The formulations were physically and chemically characterized. In vitro release was investigated in different pH media. In vivo antidiabetic activities of biotin modified and non-biotin modified chitosan were evaluated in db/db mice.

RESULTS

EXE-loaded Bio-TMC/HP-55 nanoparticles were spherical in shape with a mean diameter of 156.2 nm and zeta potential of +11.3 mV. The drug loading efficiency and loading contents were 52.38% and 2.08%, respectively. In vitro release revealed that EXE-loaded Bio-TMC/HP-55 nanoparticles were released faster in pH 1.2 than pH 6.8 (63.71% vs. 50.12%), indicating that nanoparticles had enteric characteristics. Antidiabetic activity study revealed that after oral administration to diabetic mice, the relative pharmacological bioavailability (FPharm%) of the biotin modified nanoparticles was found to be 1.27-fold higher compared with the unmodified ones and the hypoglycemic effect was also better.

CONCLUSION

Bio-TMC/HP-55 nanoparticles are feasible as oral drug carriers of exenatide and have the potential to be extended to other drugs that are not readily oral, such as monoclonal antibodies, vaccines, genes, etc., thus, this would be beneficial for pharmaceutical industries. Further research will focus on the biodistribution of Bio-TMC/HP-55 nanoparticles after oral administration.

Paclitaxel-Loaded Magnetic Nanoparticles Based on Biotinylated N-Palmitoyl Chitosan: Synthesis, Characterization and Preliminary In Vitro Studies

A considerable interest in cancer research is represented by the development of magnetic nanoparticles based on biofunctionalized polymers for controlled-release systems of hydrophobic chemotherapeutic drugs targeted only to the tumor sites, without affecting normal cells. The objective of the paper is to present the synthesis and in vitro evaluation of the nanocomposites that include a magnetic core able to direct the systems to the target, a polymeric surface shell that provides stabilization and multi-functionality, a chemotherapeutic agent, Paclitaxel (PTX), and a biotin tumor recognition layer. To our best knowledge, there are no studies concerning development of magnetic nanoparticles obtained by partial oxidation, based on biotinylated N-palmitoyl chitosan loaded with PTX. The structure, external morphology, size distribution, colloidal and magnetic properties analyses confirmed the formation of well-defined crystalline magnetite conjugates, with broad distribution, relatively high saturation magnetization and irregular shape. Even if the ability of the nanoparticles to release the drug in 72 h was demonstrated, further complex in vitro and in vivo studies will be performed in order to validate the magnetic nanoparticles as PTX delivery system.

All-polysaccharide hydrogels for drug delivery applications: Tunable chitosan beads surfaces via physical or chemical interactions, using oxidized pullulan

The present work reports a versatile approach to the manufacture of chitosan beads with tunable pore size and targeted properties. To achieve this, the as prepared chitosan beads were allowed to interact with aqueous solutions of two types of oxidized pullulan derivatives. Depending on the functional groups present on the pullulan structure after oxidation, i.e., carboxyl or aldehyde, covalent or physical hybrid hydrogels could be prepared. The attachment of oxidized pullulan onto chitosan structure was checked by FTIR, RMN, XPS and thermal analysis. The morphology of the hybrid structures was evaluated by using Scanning Electron Microscopy (SEM). After structural evaluations, all the prepared hydrogels were characterized by means of dynamic vapor sorption and swelling degree studies, exhibiting a Case-II swelling mechanism. Drug model compounds, such as ibuprofen, bacitracin and neomycin were used for drug loading and release assays, proving high drug loading capacity and tunable release behavior. Drug loaded beads exhibited antibacterial activity and hemocompatibility experiments indicated no coagulation phenomena.

A review on the synthesis of graft copolymers of chitosan and their potential applications

Chitosan is an antimicrobial, biodegradable and biocompatible natural polymer, commercially derived from the partial deacetylation of chitin. Currently modified chitosan has occupied a major part of scientific research. Modified chitosan has excellent biotic characteristics like biodegradation, antibacterial, immunological, metal-binding and metal adsorption capacity and wound-healing ability. Chitosan is an excellent candidate for drug delivery, food packaging and wastewater treatment and is also used as a supporting object for cell culture, gene delivery and tissue engineering. Modification of pure chitosan via grafting improves the native properties of chitosan. Chitosan grafted copolymers exhibit high significance and are extensively used in numerous fields. In this review, modifications of chitosan through several graft copolymerization techniques such as free radical, radiation, and enzymatic were reported and the properties of grafted chitosan were discussed. This review also discussed the applications of grafted chitosan in the fields of drug delivery, food packaging, antimicrobial, and metal adsorption as well as dye removal.

l-Ascorbic Acid and Thymoquinone Dual-Loaded Palmitoyl-Chitosan Nanoparticles: Improved Preparation Method, Encapsulation and Release Efficiency

Encapsulation of dual compounds of different characters (hydrophilic and hydrophobic) in single nanoparticles carrier could reach the site of action more accurately with the synergistic effect but it is less investigated. In our previous findings, combined-compounds encapsulation and delivery from chitosan nanoparticles were impaired by the hydrophilicity of chitosan. Therefore, hydrophobic modification on chitosan with palmitic acid was conducted in this study to provide an amphiphilic environment for better encapsulation of antioxidants; hydrophobic thymoquinone (TQ) and hydrophilic l-ascorbic acid (LAA). Palmitoyl chitosan nanoparticles (PCNPs) co-loaded with TQ and LAA (PCNP-TQ-LAA) were synthesized via the ionic gelation method. Few characterizations were conducted involving nanosizer, Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). UV–VIS spectrophotometry was used to analyze the encapsulation and release efficiency of the compounds in PCNPs. Successfully modified PCNP-TQ-LAA had an average particle size of 247.7 ± 24.0 nm, polydispersity index (PDI) of 0.348 ± 0.043 and zeta potential of 19.60 ± 1.27 mV. Encapsulation efficiency of TQ and LAA in PCNP-TQ-LAA increased to 64.9 ± 5.3% and 90.0 ± 0%, respectively. TQ and LAA in PCNP-TQ-LAA system showed zero-order release kinetics, with a release percentage of 97.5% and 36.1%, respectively. Improved preparation method, encapsulation and release efficiency in this study are anticipated to be beneficial for polymeric nanocarrier development.

Core-shell-corona chitosan-based micelles for tumor intracellular pH-triggered drug delivery: Improving performance by grafting polycation

Core-shell-corona chitosan-based micelles were designed for the tumor intracellular pH-triggered doxorubicin (DOX) delivery, via a facile in-situ micellization in an aqueous solution of DOX and polyethylene glycol (PEG) and poly(2-(diisopropylamino) ethyl methacrylate) (PDPA) dual-modified chitosan (PEG-g-CS-g-PDPA). The effect of the PDPA modification on the diameter, drug loading-capacity (DLC) and pH-triggered drug release was investigated for the three different polymerization degrees of PDPA (25, 32, and 42) with a similar modification degree of ~22%. The optimized ones, the core-shell-corona DOX/PEG-g-CS-g-PDPA₃₂ micelles possessed a mean hydrodynamic diameter (D_h) of 211 nm and DLC of 54%, showing an excellent pH-triggered drug release with negligible premature drug leakage in 60 h. Such results indicated that grafting polycation could efficiently improve the performance of the chitosan-based drug delivery system (DDS) for tumor chemotherapy.

Effect of Methylcellulose Molecular Weight on the Properties of Self-Assembling MC-g-PNtBAm Nanogels

The efficiency of drug delivery to the eye using topical drop therapy is limited by the ocular clearance mechanisms. Nanocarriers, able to encapsulate bioactive compounds and slow down their release, may allow for prolonged on-eye residence times when combined with topical application for treatment of ocular conditions. Previously, self-assemblies of methylcellulose (MC) hydrophobized with N-tert-butylacrylamide side chains (MC-g-PNtBAm) were developed. The purpose of the current study was to investigate the impact of the methylcellulose backbone length on the properties of the nanogels. We synthesized MC-g-PNtBAm nanogels using four different molecular weights of MC with two degrees of hydrophobic modification and investigated the physical and chemical properties of the resulting polymeric nanogels. While no significant change could be observed at a high degree of hydrophobization, properties were affected at a lower one. Increasing the molecular weight of MC improved the swelling capacity of the nanogels, increasing their size in water. An effect on the drug release was also noted. Nanogels prepared using MC with a molecular weight of 30 kDa did not retain as much dexamethasone and released it faster compared to those prepared using 230 kDa MC. Thus, besides the degree of hydrophobization, the length of MC chains provides another means of tuning the properties of MC-g-PNtBAm nanogels.

Development of novel biotinylated chitosan-decorated docetaxel-loaded nanocochleates for breast cancer targeting

The motive of study was to develop biotinylated chitosan (BI-CHI) decorated docetaxel (DTX) loaded nanocochleates (BI-CHI-DTX-NC) to achieve controlled drug release, improve bioavailability, targeted delivery and enhanced anticancer potency with the reduced systemic toxicity of DTX. The development involved the loading of DTX to nanocochleates (DTX-NC) through conversion of dimyristoylphosphatidylglycerol-sodium (DMPG-Na) and cholesterol bearing liposome on addition of calcium ions, followed by encapsulated DTX-NC with BI-CHI (BI-CHI-DTX- NC) and compared with DTX and DTX-NC. The release of DTX indicated strong pH dependence and implies strong hydrogen-bonding between nanocochleates and DTX. Formulated BI-CHI-DTX-NC demonstrated higher in-vitro anticancer activity in biotin over expressed human breast cancer MCF-7 cells. The targeting effect for the BI-CHI-DTX-NC was also demonstrated. The concentration of the drug needed for growth inhibition of 50% of cells in a designed time period (GI50) was 1.8 μg/ml for free DTX while it was decreased by 33.34% for the DTX-NC (1.2 μg/ml). Furthermore, the GI50 value of BI-CHI-DTX-NC was 0.2 μg/ml, i.e. an 88.89% decrease was observed as compared to DTX solution. Moreover, bioavailability of DTX from BI-CHI-DTX-NC was increased by 10-folds with longer circulation time and slower plasma elimination with low tissue distribution as compared to DTX solution. The results indicate that the BI-CHI-DTX- NC has the potential to be applied for targeting anticancer drug delivery.