Enzymatically obtaining hydrogels of PVA crosslinked with ferulic acid in the presence of laccase for biomedical applications

Biodegradable polyvinyl alcohol/nano-hydroxyapatite composite membrane enhanced by MXene nanosheets for guided bone regeneration

MXene, as a new category of two-dimensional nanomaterials, exhibits a promising prospect in biomedical applications due to its ultrathin structure and morphology, as well as a range of remarkable properties such as biological, chemical, electronic, and optical properties. In this work, different concentrations of MXene (M) were added to polyvinyl alcohol (PVA, P)/nano-hydroxyapatite (n-HA, H) mixed solution, and series of PVA/n-HA/MXene (PHM) composite membranes were obtained by combining sol-gel and freeze-drying processes. Morphology, chemical composition, surface, and mechanical properties of the prepared PHM membranes were characterized by various techniques. Subsequently, the swelling and degradation performances of the composite membranes were tested by swelling and degradation tests. In addition, in vitro studies like cell adhesion, cytotoxicity, proliferation, osteogenic differentiation, and antibacterial properties of MC3T3-E1 were also evaluated. The results showed that the addition of MXene could apparently improve the composite membranes' physicochemical properties, bioactivity, and osteogenic differentiation. Specially, PHM membrane had the best comprehensive properties when the concentration of MXene was set as 2.0% w/v. In a word, the addition of MXene has a positive effect on improving the mechanical properties, osteogenic induction, and antibacterial properties of PH composite membranes, and the prepared PHM composite membranes possess potential applications for guided bone regeneration.

Enhanced antichemobrain activity of amino acid assisted ferulic acid solid dispersion in adult zebrafish (Danio rerio)

Chemotherapy-induced cognitive impairment (CICI), also known as "chemobrain," is a common side effect of breast cancer therapy which causes oxidative stress and generation of reactive oxygen species (ROS). Ferulic acid (FA), a natural polyphenol, belongs to BCS class II is confirmed to have nootropic, neuroprotective and antioxidant effects. Here, we have developed FA solid dispersion (SD) in order to enhance its therapeutic potential against chemobrain. An amorphous ferulic acid loaded leucin solid dispersion (FA-Leu SD) was prepared by utilizing amino acid through spray-drying technique. The solid-state characterization was carried out via Fourier-transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). Additionally, in-vitro release studies and antioxidant assay were also performed along with in-vivo locomotor, biochemical and histopathological analysis. The physical properties showed that FA-Leu SD so formed exhibited spherical, irregular surface hollow cavity of along with broad melting endotherm as observed from FE-SEM and DSC results. The XRD spectra demonstrated absence of sharp and intense peaks in FA-Leu SD which evidenced for complete encapsulation of drug into carrier. Moreover, in-vitro drug release studies over a period of 5 h in PBS (pH 7.4) displayed a significant enhanced release in the first hr (68. 49 ± 5.39%) and in-vitro DPPH assay displayed greater antioxidant potential of FA in FA-Leu SD. Furthermore, the in-vivo behavioral findings of FA-Leu SD (equivalent to 150 mg/kg of free FA) exhibited positive results accompanied by in-vivo biochemical and molecular TNF-α showed a significant difference (p < 0.001) vis-à-vis DOX treated group upon DOX + FA-Leu SD. Additionally, histopathological analysis revealed neuroprotective effects of FA-Leu SD together with declined oxidative stress due to antioxidant potential of FA which was induced by anticancer drug doxorubicin (DOX). Overall, the above findings concluded that spray-dried FA-Leu SD could be useful for the treatment of chemotherapy induced cognitive impairment.

Preparation of lignin-based hydrogels, their properties and applications

Polymers obtained from biomass are a concerning alternative to petro-based polymers because of their low cost of manufacturing, biocompatibility, ecofriendly and biodegradability. Lignin as the second richest and the only polyaromatics bio-polymer in plant which has been most studied for the numerous applications in different fields. But, in the past decade, the exploitation of lignin for the preparation of new smart materials with improved properties has been broadly sought, because lignin valorization plays one of the primary challenging issues of the pulp and paper industry and lignocellulosic biorefinery. Although, well suited chemical structure of lignin comprises of many functional hydrophilic and active groups, such as phenolic hydroxyls, carboxyls and methoxyls, which provides a great potential to be applied in the preparation of biodegradable hydrogels. In this review, lignin hydrogel is covered with preparation strategies, properties and applications. This review reports some important properties, such as mechanical, adhesive, self-healing, conductive, antibacterial and antifreezing properties were then discussed. Furthermore, herein also reviewed the current applications of lignin hydrogel, including dye adsorption, smart materials for stimuli sensitive, wearable electronics for biomedical applications and flexible supercapacitors. Overall, this review covers recent progresses regarding lignin-based hydrogel and constitutes a timely review of this promising material.

Time-Dependent Controlled Release of Ferulic Acid from Surface-Modified Hollow Nanoporous Silica Particles

Release of ferulic acid from surface-functionalized hollow nanoporous silica particles (HNSPs) was investigated in deionized water (DI water) and in ethanol. The host material, an HNSP, was synthesized in the presence of polymer and surfactant templates, and the pore as well as the surface were modified with either pentyltriethoxysilane (PTS) or octyltriethoxysilane (OTS) through silane coupling reactions. The inner hollow space occupied a volume of ~45% of the whole HNSP with a 2.54 nm pore channel in the wall. The pore size was estimated to decrease to 1.5 nm and 0.5 nm via the PTS and OTS functionalization, respectively. The encapsulation efficiencies of the HNSP (25 wt%), PTS-functionalized HNSP (PTS-HNSP, 22 wt%) and OTS-functionalized HNSP (OST-HNSP, 25 wt%) toward ferulic acid were similar, while the %release in DI water and ethanol varied following HNSP > PTS-HNSP > OTS-HNSP. Release kinetic analyses with Korsmeyer-Peppas fitting suggested a trade-off relationship between the solvent's ability to access the HNSP and the affinity of ferulic acid to the surface, allowing us to understand the solvent's controlled release rate and mechanism.

Enzymatic one-pot preparation of carboxylmethyl chitosan-based hydrogel with inherent antioxidant and antibacterial properties for accelerating wound healing

Facile preparation of multifunctional hydrogel wound dressings with inherent versatile properties is highly desirable in practical healthcare. Here, a biocompatible hydrogel was designed and fabricated via mild enzymatic crosslinking and polymerization. We first designed an enzymatic system containing horseradish peroxidase (HRP), H₂O₂, and the macromolecular initiator-acetoacetyl polyvinyl alcohol (PVA-ACAC), which can generate active PVA-ACAC carbon radicals via HRP-mediated oxidation by H₂O₂. Trimethylammonium chloride (Q), methacryloyl (MA) and phenol (Ph)-grafted carboxymethyl chitosan (Ph-QCMCS-MA) was then synthesized. HRP catalyzes the oxidation of phenol groups to achieve the fast phenol crosslinking, and PVA-ACAC carbon radicals initiate the polymerization of MA groups simultaneously, finally obtaining the target PPQM gel. The quaternary ammonium and phenol groups endow the PPQM gel with excellent antibacterial and antioxidant properties, respectively. This multifunctional hydrogel, which has additional adhesive and hemostatic properties, could promote wound healing processes in an in vivo full-thickness skin defect experiment by reducing the generation of pro-inflammatory cytokines (IL-6) and upregulating anti-inflammatory factors (IL-10) and angiogenesis-related cytokines (VEGF and α-SMA). As a result, it could be used as competitive wound dressings.

Preparation and Characterization of High Mechanical Strength Chitosan/Oxidized Tannic Acid Composite Film with Schiff Base and Hydrogen Bond Crosslinking

Chitosan-based composite films with good biodegradability, biocompatibility, and sustainability are extensively employed in the field of food packaging. In this study, novel chitosan/tannic acid (CTA) and chitosan/oxidized tannic acid (COTA) composite films with excellent mechanical and antibacterial properties were prepared using a tape casting method. The results showed that, when 20% tannic acid (TA) was added, the tensile strength of the CTA composite film was 80.7 MPa, which was 89.4% higher than that of the pure chitosan (CS) film. TA was oxidized to oxidized tannic acid (OTA) with laccase, and the phenolic hydroxyl groups were oxidized to an o-quinone structure. With the addition of OTA, a Schiff base reaction between the OTA and CS occurred, and a dual network structure consisting of a chemical bond and hydrogen bond was constructed, which further improved the mechanical properties. The tensile strength of 3% COTA composite film was increased by 97.2% compared to that of pure CS film. Furthermore, these CTA films with significant antibacterial effects against Escherichia coli (E. coli) are likely to find uses in food packaging applications.

A freeze-thaw PVA hydrogel loaded with guava leaf extract: physical and antibacterial properties

A polyvinyl alcohol (PVA) hydrogel loaded with guava leaf extract (GLE) has potential applications as a wound dressing with good antibacterial activity. This study succeeded in fabricating a PVA hydrogel containing GLE using the freeze–thaw (FT) method. By varying the GLE concentration, we can adjust the physical properties of the hydrogel. The addition of GLE results in a decrease in cross-linking during gelation and an increase in the pore size of the hydrogels. The increase of the pore size made the swelling increase and the mechanical strength decrease. The weight loss of the hydrogel also increases because the phosphate buffer saline (PBS) dissolves the GLE. Increasing the GLE concentration caused the Fourier-transform infrared (FTIR) absorbance peaks to widen due to hydrogen bonds formed during the FT process. The crystalline phase was transformed into an amorphous phase in the PVA/GLE hydrogel based on the X-ray diffraction (XRD) spectra. The differential scanning calorimetry (DSC) characterization showed a significant decrease in the hydrogel weight over temperatures of 30–150 °C due to the evaporation of water from the hydrogel matrix. The zone of inhibition of the PVA/GLE hydrogel increased with antibacterial activity against Staphylococcus aureus of 17.93% per gram and 15.79% per gram against Pseudomonas aeruginosa.

A polyvinyl alcohol (PVA) hydrogel loaded with guava leaf extract (GLE) has potential applications as a wound dressing with good antibacterial activity.

Lignocellulosic fibres surface interactions in enzymatic reaction using data-mining

Lignocellulosic fibres modification focused so far essentially on the resulting material properties to create functional fibres instead of determining the reaction influencing parameters. Using a data-mining algorithm, surface chemical composition of the fibres after modifications was compared to multiple signals. A 24 h reaction at either 25 °C or 60 °C, pH5 was conducted in presence of trans-ferulic acid, laccase, and lignocellulosic fibres (flax, hemp, or cellulose) having different chemical surface composition. Dimers and trimers were detected in variable concentrations in the reaction filtrate and extractive. At 25 °C, crystalline cellulose, amorphous cellulose, xylans, mannans, and lignins were well correlated to specific reaction products while at 60 °C, only lignins and xylan were found correlated to reaction products. Fibres surface composition affected the extractive profile. Lignocellulosic surface composition influence on the product formed was unveiled using a data mining approach. This study presents a way to unveil non-evident chemical interface interaction in reactions.

Vitreous substitutes: An overview of the properties, importance, and development

Vitreous or vitreous humor is a complex transparent gel that fills the space between the lens and retina of an eye and acts as a transparent medium that allows light to pass through it to reach the photoreceptor layer (retina) of the eye. The vitreous humor is removed in ocular surgery (vitrectomy) for pathologies like retinal detachment, macular hole, diabetes-related vitreous hemorrhage detachment, and ocular trauma. Since the vitreous is not actively regenerated or replenished, there is a need for a vitreous substitute to fill the vitreous cavity to provide a temporary or permanent tamponade to the retina following some vitreoretinal surgeries. An ideal vitreous substitute could probably be left inside the eye forever. The vitreous humor is transparent, biocompatible, viscoelastic and highly hydrophilic; polymeric hydrogels with these properties can be a potential candidate to be used as vitreous substitutes. To meet the tremendous demand for the vitreous substitute, many scientists all over the world have developed various kinds of vitreous substitutes or tamponade agent. Vitreous substitutes, whatsoever developed till date, are associated with several advantages and disadvantages, and there is no ideal vitreous substitute available till date. This review highlights the polymer-based vitreous substitutes developed so far, along with their advantages and limitations. The gas-based and oil-based substitutes have also been discussed but very briefly.

Poly(Vinyl Alcohol) Recent Contributions to Engineering and Medicine

Poly(vinyl alcohol) (PVA) is a thermoplastic synthetic polymer, which, unlike many synthetic polymers, is not obtained by polymerization, but by hydrolysis of poly(vinyl acetate) (PVAc). Due to the presence of hydroxylic groups, hydrophilic polymers such as PVA and its composites made mainly with biopolymers are used for producing hydrogels that possess interesting morphological and physico-mechanical features. PVA hydrogels and other PVA composites are studied in light of their numerous application for electrical film membranes for chemical separation, element and dye removal, adsorption of metal ions, fuel cells, and packaging. Aside from applications in the engineering field, PVA, like other synthetic polymers, has applications in medicine and biological areas and has become one of the principal objectives of the researchers in the polymer domain. The review presents a few recent applications of PVA composites and contributions related to tissue engineering (repair and regeneration), drug carriers, and wound healing.

In situ synthesis of protein-loaded hydrogels via biocatalytic ATRP

Protein-loaded hydrogels were synthesized in one pot under mild polymerization conditions via biocatalytic ATRP for the first time.

Applications of Microbial Laccases: Patent Review of the Past Decade (2009–2019)

There is a high number of well characterized, commercially available laccases with different redox potentials and low substrate specificity, which in turn makes them attractive for a vast array of biotechnological applications. Laccases operate as batteries, storing electrons from individual substrate oxidation reactions to reduce molecular oxygen, releasing water as the only by-product. Due to society’s increasing environmental awareness and the global intensification of bio-based economies, the biotechnological industry is also expanding. Enzymes such as laccases are seen as a better alternative for use in the wood, paper, textile, and food industries, and they are being applied as biocatalysts, biosensors, and biofuel cells. Almost 140 years from the first description of laccase, industrial implementations of these enzymes still remain scarce in comparison to their potential, which is mostly due to high production costs and the limited control of the enzymatic reaction side product(s). This review summarizes the laccase applications in the last decade, focusing on the published patents during this period.