Non-isocyanate polyurethane nanoparticles prepared by nanoprecipitation

Surface-functionalised polymeric nanoparticles for breast cancer treatment: processes and advances

The World Health Organization (WHO) reported that of all the non-communicable diseases, cancer is considered the second cause of death worldwide. This has driven the big pharma companies to prioritise anticancer products in their pipeline. In addition, research has focused on exploration of new anticancer molecules and design of suitable dosage forms to achieve effective drug delivery to the tumour site. Nanotechnology is a valuable tool to build nano delivery systems with controlled and targeted drug release properties. Nanoparticles can be fabricated by robust, scalable and economic techniques using various polymers. Moreover, specific functional groups can be introduced to the surface of nanoparticles enabling targeting to a specific tissue; besides, they exhibit versatile drug release patterns according to the rate of polymer degradation. This review outlines the processes and advances in surface functionalisation of nanoparticles employed for treatment of breast cancer. The therapeutic molecules, the polymers used to fabricate nanoparticles, the techniques used to prepare the nanoparticles have been reviewed with a focus on the processes employed to functionalise these nanoparticles with suitable ligands to target different types of breast cancer.

Synthesis of Bis(cyclic carbonates) from Epoxy Resin under Microwave Irradiation: The Structural Analysis and Evaluation of Thermal Properties

This article describes the use of microwave irradiation in the synthesis of bis(cyclo carbonate) compounds (BCCs) in bulk (without solvent) from carbon dioxide capture using an epoxidized compound-a commercial epoxy resin-and compares this process to the conventional method. CO2 cycloaddition to epoxides is an ecological and efficient method for the formation of bis(cyclic carbonates). Moreover, the introduction of gas into the reaction mixture was carried out at atmospheric pressure with a controlled flow rate, which is advantageous from an economic point of view. Progressive structural changes and the presence of characteristic chemical groups were monitored using attenuated total reflectance infrared spectroscopy with Fourier transform. The obtained crude products were purified to obtain three fractions, which were subjected to detailed structural analysis using FT-IR and 13CNMR. The formation of the main product with two cyclic carbonates was confirmed. The presence of monomers, dimers and trimers in individual fractions as well as their thermal stability were determined, and the molecular masses in individual fractions were determined using gel permeation chromatography (GPC).

Innovations in applications and prospects of non-isocyanate polyurethane bioplastics

Currently, conventional plastics are necessary for a variety of aspects of modern daily life, including applications in the fields of healthcare, technology, and construction. However, they could also contain potentially hazardous compounds like isocyanates, whose degradation has a negative impact on both the environment and human health. Therefore, researchers are exploring alternatives to plastic which is sustainable and environmentally friendly without compromising its mechanical and physical features. This review study highlights the production of highly eco-friendly bioplastic as an efficient alternative to non-biodegradable conventional plastic. Bioplastics are produced from various renewable biomass sources such as plant debris, fatty acids, and oils. Poly-addition of di-isocyanates and polyols is a technique employed over decades to produce polyurethanes (PUs) bioplastics from renewable biomass feedstock. The toxicity of isocyanates is a major concern with the above-mentioned approach. Novel green synthetic approaches for polyurethanes without using isocyanates have been attracting greater interest in recent years to overcome the toxicity of isocyanate-containing raw materials. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines appears to be the most promising method to obtain non-isocyanate polyurethanes (NIPUs). This method results in the creation of polymeric materials with distinctive and adaptable features with the elimination of harmful compounds. Consequently, non-isocyanate polyurethanes represent a new class of green polymeric materials. In this review study, we have discussed the possibility of creating novel NIPUs from renewable feedstocks in the context of the growing demand for efficient and ecologically friendly plastic products.

Synthesis, characterization, and evaluation of chloroaluminium phthalocyanine incorporated in poly(ε-caprolactone) nanoparticles for photodynamic therapy

BACKGROUND

The use of nanotechnology has been widely used in biomedical science, which consists of orthopedic implants, tissue engineering, cancer therapy and drug elution from nanoparticle systems, such as poly-caprolactone (PCL) nanoparticles, which stand out mainly for their biocompatibility, being considered as effective carriers for photosensitizing drugs (PS) in photodynamic therapy (PDT) protocols.

METHODS

This manuscript describes the synthesis and characterization of PCL nanoparticles for controlled release of the drug chloro-aluminum phthalocyanine (ClAlPc) as a photosensitizer for application in PDT. The PCL-ClAlPc nanoparticles were developed by the nanoprecipitation process. The structure and morphology of the nanoparticles were studied with scanning electron microscopy (SEM) and with Fourier transform infrared (FTIR). The size of nanomaterials was studied using the Dynamic Light Scattering (DLS) method. Photophysical and photochemical characterizations were performed. Subsequently, photobiological studies were also used to characterize the system.

RESULTS

The nanoparticles had an average diameter of 384.7 ± 138.6 nm and a polydispersity index of 0.153. SEM analysis revealed that the system formed a spherical shape typical of these delivery systems. Charging efficiency was 82.1% ± 1.2%. The phthalocyanine-loaded PCL nanoparticles maintained their photophysical behavior after encapsulation. Cell viability was determined after the dark toxicity test, and it was possible to observe that there was no evidence of toxicity in the dark, for all concentrations tested. The assay also revealed that adenocarcinoma cells treated with free ClAlPc and in the nanoformulation showed 100% cell death when subjected to PDT protocols. The intracellular location of the photosensitizer indicated a high potential for accumulation in the cytoplasm and nucleus.

CONCLUSIONS

From the photophysical, photochemical and photobiological analyzes obtained, it was possible to observe that the development of PCL nanoparticles encapsulated with ClAlPc, by the nanoprecipitation method was adequate and that the in vivo release study is efficient to reduce the release rate and attenuate the burst of PS loaded on PCL nanoparticles. The results reinforce that the use of this system as drug delivery systems is useful in PDT protocols.

Pharmaceutical nanotechnology: from the bench to the market

Background

Nanotechnology is considered a new and rapidly emerging area in the pharmaceutical and medicinal field. Nanoparticles, as drug delivery systems, impart several advantages concerning improved efficacy as well as reduced adverse drug reactions.

Main body

Different types of nanosystems have been fabricated including carbon nanotubes, paramagnetic nanoparticles, dendrimers, nanoemulsions, etc. Physicochemical properties of the starting materials and the selected method of preparation play a significant aspect in determining the shape and characteristics of the developed nanoparticles. Dispersion of preformed polymers, coacervation, polymerization, nano-spray drying and supercritical fluid technology are among the most extensively used techniques for the preparation of nanocarriers. Particle size, surface charge, surface hydrophobicity and drug release are the main factors affecting nanoparticles physical stability and biological performance of the incorporated drug. In clinical practice, many nanodrugs have been used for both diagnostic and therapeutic applications and are being investigated for various indications in clinical trials. Nanoparticles are used for the cure of kidney diseases, tuberculosis, skin conditions, Alzheimer’s disease, different types of cancer as well as preparation of COVID-19 vaccines.

Conclusion

In this review, we will confer the advantages, types, methods of preparation, characterization methods and some of the applications of nano-systems.

Trends in non-isocyanate polyurethane (NIPU) development

The transition towards safer and more sustainable production of polymers has led to a growing body of academic research into non-isocyanate polyurethanes (NIPUs) as potential replacements for conventional, isocyanate-based polyurethane materials. This perspective article focuses on the opportunities and current limitations of NIPUs produced by the reaction between biobased cyclic carbonates with amines, which offers an interesting pathway to renewable NIPUs. While it was initially thought that due to the similarities in the chemical structure, NIPUs could be used to directly replace conventional polyurethanes (PU), this has proven to be more challenging to achieve in practice. As a result, and in spite of the vast amount of academic research into this topic, the market size of NIPUs remains negligible. In this perspective, we will emphasize the main limitations of NIPUs in comparison to conventional PUs and the most significant advances made by others and us to overcome these limitations. Finally, we provide our personal view of where research should be directed to promote the transition from the academic to the industrial sector.

Five-Membered Cyclic Carbonates: Versatility for Applications in Organic Synthesis, Pharmaceutical, and Materials Sciences

This review presents the recent advances involving several applications of five-membered cyclic carbonates and derivatives. With more than 150 references, it covers the period from 2012 to 2020, with special emphasis on the use of five-membered cyclic carbonates as building blocks for organic synthesis and material elaboration. We demonstrate the application of cyclic carbonates in several important chemical transformations, such as decarboxylation, hydrogenation, and transesterification reactions, among others. The presence of cyclic carbonates in molecules with high biological potential is also displayed, together with the importance of these compounds in the preparation of materials such as urethanes, polyurethanes, and flame retardants.

Activity of Povidone in Recent Biomedical Applications with Emphasis on Micro- and Nano Drug Delivery Systems

Due to the unwanted toxic properties of some drugs, new efficient methods of protection of the organisms against that toxicity are required. New materials are synthesized to effectively disseminate the active substance without affecting the healthy cells. Thus far, a number of polymers have been applied to build novel drug delivery systems. One of interesting polymers for this purpose is povidone, pVP. Contrary to other polymeric materials, the synthesis of povidone nanoparticles can take place under various condition, due to good solubility of this polymer in several organic and inorganic solvents. Moreover, povidone is known as nontoxic, non-carcinogenic, and temperature-insensitive substance. Its flexible design and the presence of various functional groups allow connection with the hydrophobic and hydrophilic drugs. It is worth noting, that pVP is regarded as an ecofriendly substance. Despite wide application of pVP in medicine, it was not often selected for the production of drug carriers. This review article is focused on recent reports on the role povidone can play in micro- and nano drug delivery systems. Advantages and possible threats resulting from the use of povidone are indicated. Moreover, popular biomedical aspects are discussed.

Implementation of the emulsification-diffusion method by solvent displacement for polystyrene nanoparticles prepared from recycled material

From an integral perspective, nanotechnology can be used to care for the environment by improving current preparation methods and facilitating industrial scale-up. This article discusses the implementation of techniques for obtaining polystyrene nanoparticles (PSN), as an added value, using an emulsification and solvent displacement method (EDSD); the solvent displacement is a novel modification to the emulsion-diffusion methodology, where the diffusion is done directly on the emulsion, which allows concentrated dispersions that facilitate direct use to be obtained, eliminating the dilution with water and the recovery of water by additional processes. The solvent was recovered by reduced pressure, which is class 3, conforming to ICH, and making this method sustainable. The optimization of this process has not been reported elsewhere. This approach made it possible to obtain highly-concentrated nanoparticles while allowing the reuse of the solvent. A scaling proposal is presented that integrates the conditioning of the solid urban waste material called expanded polystyrene (EPS) foam that constitutes a serious environmental problem both nationally and globally. Hence, the article presents an alternative to the recycling of EPS, and a methodology in the context of green chemistry, because solvent is recovered to prepare other batches. The PSN obtained from this waste material had a minimum particle size of 225.8 nm, with a polydispersion index of 0.158. Process performance was 97.1%, and the solvent was recovered at a maximum rate of 85%. The morphology of the PSN was spherical and uniform, with a smooth surface.

Technological advancement in the synthesis and applications of lignin-based nanoparticles derived from agro-industrial waste residues: A review

Over the years, lignin has drawn a great deal of interest for their potential use as bio-polymers due to the presence of high amount of phenolic compounds, non-polluting feature and cost-competitiveness as compared to synthetic polymers. However, in order to fast-track their development, different attempts are made towards the usage of lignin in nano form since it exhibits some unique properties in nanoscale range. The present review article provides a detail analysis on the recent advancement in the synthesis and applications of lignin nanoparticles (LNPs) derived from agro-industrial waste residues. In view of that, an in-depth morphological analysis was reviewed to assess the structural influence on the characteristics of LNPs. Further, application of LNPs is explored in different fields including bio-medical engineering, pharmaceuticals, skin-care products and food industries. Finally, the paper is concluded discussing various challenges associated with the synthesis, modification and development with an aspiration of futuristic developments. The readers of this review article will be highly benefitted after acquiring a comprehensive knowledge on LNPs and its different synthesis processes along with various applications.

Water-based non-isocyanate polyurethane-ureas (NIPUUs)

This review aims at discussing the achievements and the remaining challenges in the development of water-soluble NIPUUs, NIPUUs-based hydrogels and water-borne NIPUU dispersions.