Synthesis of thiol-terminated PEG-functionalized POSS cross-linkers and fabrication of high-strength and hydrolytic degradable hybrid hydrogels in aqueous phase

Copper nanoparticles loaded gelatin/ polyvinyl alcohol/ guar gum-based 3D printable multimaterial hydrogel for tissue engineering applications

Hydrogels are becoming increasingly significant in tissue engineering because of their numerous benefits, including biocompatibility, biodegradability, and their ability to provide a supportive structure for cell proliferation. This study presents the synthesis and characterization of a new multimaterial hydrogel with 3D-printing capabilities composed of copper nanoparticle-reinforced gelatin, polyvinyl alcohol (PVA), and guar gum-based biomaterials intended for tissue engineering applications. Combining CuNPs aims to enhance the hydrogel's antibacterial properties, mechanical strength, and bioactivity, which are essential for successful tissue regeneration. Hydrogels are chemically cross-linked with glyoxal and analyzed through different assessments to examine the compressive behavior, surface morphology, sorbing capacity, biocompatibility, thermal stability, and degradation properties. The results demonstrated that including CuNPs significantly improved the hydrogel's compressive modulus (4.18 MPa) for the hydrogel with the CuNPs and provided better antibacterial activity against common pathogens with controlled degradation. All the hydrogels exhibited a lower coefficient of friction, which was below 0.1. In vitro cell culture studies using chondrocytes indicated that the CuNPs-loaded hydrogel supported cell proliferation and growth of chondrogenic genes such as collagen type II (COL2) and aggrecan (ACAN). The biocompatibility and enhanced mechanical properties of the multimaterial hydrogel make it a promising candidate for developing customized, patient-specific tissue engineering scaffolds.

Thiol-Ene Click Cross-linking of Starch Oleate Films for Enhanced Properties

Biobased films were synthesized from starch oleate (DS = 2.2) cross-linked with polyethylene glycol with Mn = 2000 and 1000 g · mol-1, and ethylene glycol, all of which were esterified with either lipoic acid (LA) or 3-mercaptopropionic acid (MPA). Cross-linking was achieved through a UV-initiated thiol-ene click, and confirmed by Fourier transform infrared spectroscopy and rheometry. The films exhibit higher degradation temperatures, and an increased degree of crystallinity as cross-linker length increased. The introduction of MPA-based cross-linkers resulted in hydrophilic films, while the contact angle was barely affected by the addition of LA-based cross-linkers. A reduction in maximum strength upon introducing the cross-linkers was observed, while an increase in elongation was observed for most of the LA-based cross-linkers. Our results demonstrate the potential for tuning the mechanical and thermal properties of starch-based films through the cross-linker choice, with some formulations exhibiting increased flexibility that may be well suited for packaging applications.

In Situ Cross-Linkable Hyaluronic-Ferulic Acid Conjugate Containing Bucladesine Nanoparticles Promotes Neural Regeneration after Spinal Cord Injury

Dysfunctional clinical outcomes following spinal cord injury (SCI) result from glial scar formation, leading to the inhibition of new axon growth and impaired regeneration. Nevertheless, nerve regeneration after SCI is possible, provided that the state of neuron development in the injured environment is improved. Hence, biomaterial-based therapy would be a promising strategy to endow a desirable environment for tissue repair. Herein, we designed a novel multifunctional injectable hydrogel with antioxidant, neuroprotective, and neuroregenerative effects. Bucladesine-encapsulated chitosan nanoparticles (BCS NPs) were first prepared and embedded in a matrix of thiol-functionalized hyaluronic acid modified with ferulic acid (HASH-FA). The target hydrogel (HSP-F/BCS) was then created through Michael-type addition between HASH-FA containing BCS NPs and four-arm polyethylene glycol-maleimide (4-Arm-PEG-Mal). The obtained hydrogel with shear thinning behavior showed viscoelastic and mechanical properties similar to the normal nerve tissue. FA conjugation significantly improved the antioxidant activity of HA, and suppressed intracellular ROS formation. In situ injection of the HSP-F/BCS hydrogel in a rat contusion model of SCI inhibited glial scar progression, reduced microglia/macrophage infiltration, promoted angiogenesis, and induced myelinated axon regeneration. As a result, a significant improvement in motor performance was observed compared to other experimental groups. Taken together, the HSP-F/BCS hydrogel developed in this study could be a promising system for SCI repair.

Injectable self-healing chitosan-based POSS-PEG hybrid hydrogel as wound dressing to promote diabetic wound healing

Promoting the healing of diabetic wounds remains a major challenge in scientific research today. A star-like eight-arm cross-linker octafunctionalized POSS of benzaldehyde-terminated polyethylene glycol (POSS-PEG-CHO) was synthesized, and crosslinked with hydroxypropyltrimethyl ammonium chloride chitosan (HACC) via Schiff base reaction to obtain Chitosan-based POSS-PEG hybrid hydrogels. The designed composite hydrogels exhibited strong mechanical strength, injectability, excellent self-healing efficiency, good cytocompatibility and antibacterial properties. Furthermore, the composite hydrogels could accelerate cells migration and proliferation, as expected by remarkably promoting wound healing in diabetic mice. The wounds treated with the composite hydrogels displayed faster regeneration of epithelial tissue, fewer inflammatory cells, more collagen deposition and higher expression level of VEGF. Therefore, Chitosan-based POSS-PEG hybrid hydrogel has great application potential as a dressing for promoting the healing of diabetic wounds.

Surface Modification of Decellularized Heart Valve by the POSS-PEG Hybrid Hydrogel to Prepare a Composite Scaffold Material with Anticalcification Potential

Tissue-engineered heart valves (TEHVs) are the most promising replacement for heart valve transplantation. Decellularized heart valve (DHV) is one of the most common scaffold materials for TEHVs. In actual clinical applications, the most widely used method for treating DHV is cross-linking it with glutaraldehyde, but this method could cause serious problems such as calcification. In this study, we introduced polyhedral oligomeric silsesquioxane (POSS) nanoparticles into a poly(ethylene glycol) (PEG) hydrogel to prepare a POSS-PEG hybrid hydrogel, and then coated them on the surface of DHV to prepare the composite scaffold. The chemical structures, microscopic morphologies, cell compatibilities, blood compatibilities, and anticalcification properties were further investigated. Experimental results showed that the composite scaffold had good blood compatibility and excellent cell compatibility and could promote cell adhesion and proliferation. In vivo and in vitro anticalcification experiments showed that the introduction of POSS nanoparticles could reduce the degree of calcification significantly and the composite scaffold had obvious anticalcification ability. The DHV surface-coated with the POSS-PEG hybrid hydrogel is an alternative scaffold material with anticalcification potential for an artificial heart valve, which provides an idea for the preparation of TEHVs.

Stability Efficiencies of POSS and Microalgae Extracts on the Durability of Ethylene-Propylene-Diene Monomer Based Hybrids

The EPDM (ethylene-propylene-diene monomer) hybrids with improved thermal and radiation strengths containing 1 and 5 phr of polyhedral oligomeric silsesquioxane (vinyl-POSS, Ov-POSS) and/or 2 phr of microalgae (Chlorella vulgaris (CV) and Spirulinaplatensis (SP)) powders were investigated in respect to their thermal stability after γ-irradiation. The material durability under accelerated degradation was qualified by chemiluminescence and gelation, which prove the contribution of inorganic filler and microalgae extracts on the increase of hybrid thermal stability, as well as the interaction between added components (POSS and CV or SP). The activation energies and the durabilities under accelerated degradation were calculated, indicating their suitable usage as appropriate materials in various applications. The reported results indicate the improvement effect of both microalgal powders on the oxidation strength, but the contribution of Spirulinaplatensis grabs attention on its efficient effects upon the prevention of degradation under accelerated aging conditions. The thermal performances of the tested EPDM based hybrids are remarkably ameliorated, if the certain formulation includes Ov-POSS (5 phr) and Spirulinaplatensis (2 phr), certifying its suitability for the pertinent applications.

Tailor-made shape memory stents for therapeutic enzymes: A novel approach to enhance enzyme performance

Herein, our suggestion is to immobilize enzymes in-situ on absorbable shape-memory stents instead of injecting therapeutic enzymes into the blood. Chitosan (CHI)-based stents were tailored as novel support and the enzyme-immobilizing ability was elucidated using L-asparaginase (L-ASNase). For developing shape-memory stents, CHI-glycerol (GLY) solution was prepared and further blended with different ratios of polyethylene glycol (PEG), and polyvinyl alcohol (PVA). Afterward, the blends were modified by ionic crosslinking with sodium tripolyphosphate to obtain a shape-memory character. L-ASNase was included in the blends by using in-situ method before ionic crosslinking. The prepared stents, with or without L-ASNase, were comprehensively characterized by using several techniques. Collectively, immobilized L-ASNase exhibited much better performance in immobilization parameters than free one, thanks to its improved stability and reusability. For instance, CHI/GLY/PEG-3@L-ASNase retained about 70% of the initial activity after storage at 30 °C for 2 weeks, whereas the free form lost half of its initial activity. Besides, it retained 73.4% residual activity after 15 consecutive cycles. Most importantly, stent formulations exhibited ~60% activity in the bioreactor system after 4 weeks of incubation. Given the above results, shape-memory stents can be a promising candidate as a new platform for immobilization, especially in the blood circulation system.

Synthesis and characterization of tetrathiol-substituted double-decker or ladder silsesquioxane nano-cores

Tetra(3-mercaptopropyl)-silsesquioxanes with double-decker (DDSQ) or ladder nano-cores were easily prepared from the corresponding tetraallyl derivatives through fast and convenient thiol-ene reactions. An additional tetrathiol-DDSQ with more flexible arms was also synthesized in high yield from the corresponding tetrachloro-DDSQ derivative. The three novel tetrathiol silsesquioxanes described represent versatile building blocks for the preparation of hybrid organic-inorganic materials.

Injectable and Degradable PEG Hydrogel with Antibacterial Performance for Promoting Wound Healing

Injectable and degradable PEG hydrogel was prepared via Michael-type addition between cross-linking monomer 4-arm-PEG-MAL and two cross-linkers of hydrolysis degradable PEG-diester-dithiol and non-degradable PEG-dithiol, and it had a porous structure with the uniform pore size. The biocompatibility assays in vitro indicated that PEG hydrogel had excellent biocompatibility and can be degraded naturally without leading to any negative impact on cells. The results of antibacterial experiments showed that PEG hydrogel can inhibit the growth of bacteria. Furthermore, the Cell Counting Kit-8 (CCK-8) assay, LIVE/DEAD cell staining, and scratch healing experiments proved that PEG hydrogel can promote cell proliferation and migration, which had been further confirmed in in vivo experiments on the rat wound models. All experimental results demonstrated that PEG hydrogel is an injectable antibacterial dressing, which can promote the process of wound healing and has great potential in the field of wound healing.

Anticalcification Potential of POSS-PEG Hybrid Hydrogel as a Scaffold Material for the Development of Synthetic Heart Valve Leaflets

Calcification of bioprosthetics is a primary challenge in the field of artificial heart valves and a main reason for biological heart valve prostheses failure. Recent advances in nanomaterial science have promoted the development of polymers with advantageous properties that are likely suitable for artificial heart valves. In this work, we developed a nanocomposite polymeric biomaterial POSS-PEG (polyhedral oligomeric silsesquioxane-polyethylene glycol) hybrid hydrogel, which not only has improved mechanical and surface properties but also excellent biocompatibility. The results of atomic force microscopy and in vivo animal experiments indicated that the content of POSS in the PEG matrix plays an important role on the surface and contributes to its biological properties, compared to the decellularized porcine aortic valve scaffold. Additionally, this modification leads to enhanced protection of the hydrogel from thrombosis. Furthermore, the introduction of POSS nanoparticles also gives the hydrogel a better calcification resistance efficacy, which was confirmed through in vitro tests and animal experiments. These findings indicate that POSS-PEG hybrid hydrogel is a potential material for functional heart valve prosthetics, and the use of POSS nanocomposites in artificial valves may offer potential long-term performance and durability advantages.