Mechanical, thermal and morphological properties of poly(lactic acid) by using star-shaped poly(ε-caprolactone) with POSS core

Effect of Tetrapropylammonium Chloride Quaternary Ammonium Salt on Characterization, Cytotoxicity, and Antibacterial Properties of PLA/PEG Electrospun Mat

In this study, poly(lactic acid) (PLA)-tetrapropylammonium chloride (TCL)-poly(ethylene glycol) (PEG) nonwoven networks were produced using PLA, PEG with different concentrations (3, 5, 7, and 9 wt%), and TCL. PEG is included as a plasticizer in PLA polymer, which has high biocompatibility but a brittle structure. The importance of this study is to investigate the effect of TCL salt on the characterization of PLA-PEG nanofibers. For this research, the cytotoxicity test system responsible for the fibroblast cell line (L929) was evaluated with the liquid absorption capacity (LAC) and drying time tests for its use in wound dressings. The addition of TCL salt reduced bead formation in PLA-PEG nanofibers and increased the homogeneity of fiber dispersion. The smoothest and most homogeneous nonwoven networks were obtained as PLA-5TCL-PEG. It was also reported that this nonwoven network exhibited liquid absorption behavior with a maximum increase of 150% compared to the PLA-PEG nonwoven network and had the highest Young's modulus value of 12.97 MPa. In addition to these tests, evaluations were made with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), drying time test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and mechanical tests. In addition, high cell viability was observed in L292 mouse fibroblast cells at the end of the 24th hour, again with the effect of TCL salt. In addition, antibacterial activity was tested against gram-negative E. coli and gram-positive S. aureus bacteria, and it was observed that there was no antibacterial activity. Since PLA-TCL-PEG nonwoven webs have a maximum cell viability of 133.27%, they are recommended as a potential dermal wound dressing.

On the Development of Polylactic Acid/Polycaprolactone Blended Films with High Retention Capacity

The retention capacity of polymers is related to the development of systems that combine high surface-to-volume ratio with good handling and specific functionality. Biodegradability and biocompatibility are also key features for extending the field of applications to areas such as biomedicine. With this in mind, the aim of this work is to develop biodegradable, biocompatible, and highly functionalized porous films, that ensure suitable handling and a good surface-to-volume ratio. Polylactic acid (PLA) is applied as a polymer matrix to which a polycaprolactone with a star-shaped architecture (PCL-COOH) to ensure a high concentration of carboxylic end functionalities is added. The porous films are prepared using the phase inversion technique, which, as shown by Scanning Electron Microscopy (SEM) analysis, promotes good dispersion of the PCL-COOH domains. Absorption and release measurements performed with a positively charged model molecule show that the retention capacity and release rate can be tuned by changing the PCL-COOH concentration in the systems. Moreover, the adsorption properties for the formulation with the highest PCL-COOH content are also demonstrated with a real and widely used drug, namely doxorubicin. Finally, the bio- and hemocompatibility of the films, which are enzymatically degradable, are evaluated by using human keratinocytes and red blood cells, respectively.

Effect of Different Comonomers Added to Graft Copolymers on the Properties of PLA/PPC/PLA-g-GMA Blends

The melt-free radical grafting of glycidyl methacrylate (GMA) onto poly (lactic acid) (PLA) with styrene (St), α-methylstyrene (AMS), and epoxy resin (EP) as comonomers in a twin-screw extruder was used to prepare PLA-g-GMA graft copolymers. The prepared graft copolymers were then used as compatibilizers to prepare PLA/PPC/PLA-g-GMA blends by melt blending with PLA and polypropylene carbonate (PPC), respectively. The effects of different comonomers in the PLA-g-GMA graft copolymers on the thermal, rheological, optical, and mechanical properties and microstructure of the blends were studied. It was found that the grafting degree of PLA-g-GMA graft copolymers was increased to varying degrees after the introduction of comonomers in the PLA-g-GMA grafting reaction system. When St was used as the comonomer, the grafting degree of the PLA-g-GMA graft copolymer increased most significantly, from 0.8 to 1.6 phr. St as a comonomer also most improved the compatibility between PLA and PPC, and the haze of the blends was reduced while maintaining high transmittance. In addition, the PLA-g-GMA graft copolymer with the introduction of St as a comonomer significantly improved the impact toughness of the blends, while the thermal stability and tensile strength of the blends remained largely unchanged.

Synthesis of Octachloro- and Octaazido-Functionalized T8-Cages and Application to Recyclable Palladium Catalyst

Unprecedented T₈-cages bearing eight chloromethyldimethylsilylethyl substituents were obtained in excellent yield from the readily and commercially available octavinylsilsesquioxane. The chloro groups can be quantitatively substituted by azido ones to yield the corresponding octaazido T₈ without rearrangement of the cage. The syntheses of both functionalizable POSSs are scalable (gram-scale). The azido-functionalized T₈ compound constitutes a versatile building block able to undergo copper-catalyzed azide-alkyne [3 + 2] cycloaddition. As a proof of concept, it was allowed to react with 2-ethynylpyridine to give rise to a multidentate ligand bearing eight 2-pyridyl-triazole moieties (N,N-pincers). The coordination of the eight N,N-bidentate ligands to palladium(II) led to the corresponding octa-palladium complex shown to successfully promote the coupling reaction between anisole and phenylboronic acid. The low solubility of this catalytic complex in the reaction medium enabled (or facilitated or made possible) its straightforward recovery and recycling with four cycles with no loss of activity.

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Poly (lactic acid) (PLA) with branched structure has abundant terminal groups, high melt strength, good rheological properties, and excellent processability; it is a new research and application direction of PLA materials. This study mainly summarizes the molecular structure design, preparation methods, basic properties of branched PLA, and its application in modified PLA materials. The structure and properties of branched PLA prepared by ring-opening polymerization of monomer, functional group polycondensation, and chain extender in the processing process were introduced. The research progress of in situ formation of branched PLA by initiators, multifunctional monomers/additives through dynamic vulcanization, and irradiation induction was described. The effect of branched PLA on the structure and properties of linear PLA materials was analyzed. The role of branched PLA in improving the crystallization behavior, phase morphology, foaming properties, and mechanical properties of linear PLA materials was discussed. At the same time, its research progress in biomedicine and tissue engineering was analyzed. Branched PLA has excellent compatibility with PLA, which has important research value in regulating the structure and properties of PLA materials.

Morphology, Thermo-Mechanical Properties and Biodegradibility of PCL/PLA Blends Reactively Compatibilized by Different Organic Peroxides

Reactive blending is a promising approach for the sustainable development of bio-based polymer blends and composites, which currently is gaining more and more attention. In this paper, biodegradable blends based on poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) were prepared via reactive blending performed in an internal mixer. The PCL and PLA content varied in a ratio of 70/30 and 55/45. Reactive modification of PCL/PLA via liquid organic peroxides (OP) including 0.5 wt.% of tert-butyl cumyl peroxide (BU), 2,5-dimethyl-2,5-di-(tert-butylperoxy)-hexane (HX), and tert-butyl peroxybenzoate (PB) is reported. The materials were characterized by rotational rheometer, atomic force microscopy (AFM), thermogravimetry (TGA), differential scanning calorimetry (DSC), tensile tests and biodegradability tests. It was found that the application of peroxides improves the miscibility between PCL and PLA resulted in enhanced mechanical properties and more uniform morphology. Moreover, it was observed that the biodegradation rate of PCL/PLA blends reactively compatibilized was lower comparing to unmodified samples and strongly dependent on the blend ratio and peroxide structure. The presented results confirmed that reactive blending supported by organic peroxide is a promising approach for tailoring novel biodegradable polymeric systems with controllable biodegradation rates.

Preparation of hetero-armed POSS-cored star-shaped PCL-PLA/PLA composites and effect of different diisocyanates as compatibilizer

Eight-armed A₄B₄-type hetero-arm star-shaped PCL-PLA polymers ((PCL)₄-POSS-(PLA)₄, SPLA30) with POSS core were successfully prepared via combination of the "arm-first" approach utilizing ring-opening polymerization (ROP) and click chemistry techniques. Firstly, alkyne-functional PLA and PCL polymers having arms with 30 repeating units were synthesized via ROP with utilizing propargyl alcohol as initiator and stannous octoate (Sn(Oct)₂) as catalyst. Then, the obtained hetero-armed star-shaped polymers were prepared by Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction between alkyne functional polymers (1:1 PCL:PLA) and azido functional polyhedral oligomeric silsesquoxane (POSS-(N₃)₈) molecules. Finally, these obtained star-shaped SPLA30 was blended with neat PLA at different PLA/SPLA30 ratios (95/5 and 90/10 wt%) via melt blending by utilizing micro-compounder (a lab-scale) to enhance thermal, morphological, and mechanical properties of neat PLA. Also, different diisocyanates (1,4-phenylene diisocyanate (PDI), isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), and toluene 2,4-diisocyanate (TDI)) at constant ratio (1 wt%) were used as a chain extender bonding terminal group of polymers. It was found that addition of SPLA30 and SPLA30+ diisocyanates provided improvements in mechanical properties (especially in elongation at break and impact strength) of neat PLA. When the thermal properties were examined, it was seen that the decomposition temperatures of the blends decreased significantly compared to neat PLA and that there was a significant increment in the T_g and T_m values. In addition, it has been found that especially the diisocyanates added to provide good interfacial adhesion with polymer blends and show a homogeneous distribution on the surface.

Reducing cytotoxicity of poly (lactic acid)-based/zinc oxide nanocomposites while boosting their antibacterial activities by thymol for biomedical applications

In the present study, ternary blends based on poly (lactic acid)/poly (ε-caprolactone)/thermoplastic starch were prepared at different concentrations of synthesized zinc oxide nanoparticles (ZnO-NPs) and thymol. The sizes of ZnO-NPs with an average diameter of about 30-50 nm were detected by FE-SEM analysis. Moreover, the effect of ZnO-NPs and thymol on morphological, FT-IR spectrum, UV absorption, thermal stability, cytotoxicity, and antibacterial properties of neat blend was investigated. TGA analysis showed that the addition of ZnO-NPs and/or thymol diminished thermal stability of the system. Incorporating ZnO-NPs improved antibacterial activities of the neat blend, but MTT-assay and AO fluorescent staining test results depicted a decrease in cell viability to less than 20% by the addition of 5 wt% ZnO-NPs. In such a condition, the addition of thymol to the nanocomposites exhibited a dose-dependent increase in cell survival mostly due to thymol antioxidant properties. Interestingly, the antibacterial performance of compounds was also improved by the presence of thymol. Therefore, the obtained nanocomposites have potential to extend applications of innovative biomedical devices for future research in which both high cell viability and superior antibacterial properties are needed such as an antibacterial wound healing film.

Toughening of Poly(l-Lactide) with Branched Polycaprolactone: Effect of Chain Length

In this work, a series of branched polycaprolactone (BPCL) samples with different ε-caprolactone (CL) chain lengths were synthesized and used to toughen poly (lactic acid) (PLA). The spherical structure increased the free volume, facilitating the free movement of the PLA chain segment and increasing the ductility. In addition, the hydrogen bonds between the multi-terminal hydroxyl group of BPCL x and PLA improved the interaction between them. The glass-transition temperatures (T g) and crystallization temperatures (T c) of the blends were significantly lower than those of PLA, and these temperatures increased with the chain length of polycaprolactone. BPCL x increased the crystallization rate of PLA through heterogeneous nucleation. A longer chain length of CL increased the mutual entanglement in the blends, reduced the hydrogen bonding between BPCL x and PLA, and increased the entanglement of BPCL x chains. When the chain length of CL was 6, the impact strength and elongation at break of the PLA/BPCL blends exhibited an increase of 151.72 and 465.8%, respectively, as compared with PLA.

Synthesis of Tetrachloro, Tetraiodo, and Tetraazido Double-Decker Siloxanes

A convenient and scalable (gram-scale) route to unprecedented T₈D₂-double-decker siloxanes (DDSQs) bearing four chloro (3b) or four azido (5b) groups is reported. Both compounds were characterized and proved to undergo successful nucleophilic substitution for 3b (with iodide or azide) and copper-catalyzed azide-alkyne [3 + 2] cycloaddition for 5b. All of these transformations occurred under mild conditions, and the corresponding DDSQs were prepared in very high yields. Beyond the enhanced multivalency as compared to the previously described disubstituted D₂T₈ structures, the reported tetrafunctional DDSQs are formed as a single isomer and readily isolated in very high yields. Moreover, the tetra-azido DDSQ 5b constitutes a multipurpose nanobuilding block for the further preparation of new inorganic-organic hybrid materials where the covalent incorporation of a DDSQ moiety brings valuable properties.