Tunable modalities in polyolefin synthesis via coordination insertion catalysis

Coplanar binuclear group 4 post-metallocene complexes supported by chelating μ-(σ2-aryl) ligands: characterisation and olefin polymerisation catalysis

The report concerns expansion of the previously developed M-[O,N,C] [pyridine-2-phenolate-6-(σ-aryl)] catalyst system into rigid, coplanar bimetallic assemblies, which afford metal-metal distances that are predetermined yet amenable for cooperativity, as well as locked-in "syn" orientation of binding sites that offer the same direction of access for substrates. The binuclear complexes are generated in a regioselective manner to yield para hydrogen atoms (not ortho) at the central μ-aryl moiety, and have been characterised by multinuclear NMR spectroscopy. The "anti" (showing opposite directions of access) and mononuclear analogues have also been prepared for comparison purposes. Six syn-type bimetallic derivatives of Ti, Zr and Hf have been characterised by X-ray crystallography, to reveal metal-metal separations of 6.3-6.7 Å. For ethylene and ethylene/1-octene polymerisation reactions in conjunction with trityl borate, the syn-Ti2 catalysts display superior efficiencies and produced polymers with higher Mw values than for the anti and mono-Ti congeners, thus indicating the possibility of favourable enchainment interactions and cooperative reactivity.

Tunable and Switchable Catalysis Enabled by Cation-Controlled Gating with Crown Ether Ligands

ConspectusCatalysis has become an essential tool in science and technology, impacting the discovery of pharmaceuticals, the manufacture of commodity chemicals and plastics, the production of fuels, and much more. In most cases, a particular catalyst is optimized to mediate a particular reaction, continually producing a desired product at a given rate. There is enormous opportunity in developing catalysts that are dynamic, capable of responding to a change in the environment to alter structure and function. Controlled catalysis, in which the activity or selectivity of a catalytic reaction can be adjusted through an external stimulus, offers opportunities for innovation in catalysis. Catalyst discovery could be simplified if a single thoughtfully designed complex could work synergistically with additives to optimize performance rather than trying a multitude of different metal/ligand combinations. Temporal control could be gained to facilitate the execution of multiple reactions in the same flask, for example, by activating one catalyst and deactivating another to avoid incompatibilities. Selectivity switching could enable copolymer synthesis with well-defined chemical and material properties. These applications might sound futuristic for synthetic catalysts, but in nature, such a degree of controlled catalysis is commonplace. For example, allosteric interactions and/or feedback loops modulate enzymatic activity to enable complex small-molecule synthesis and sequence-defined polymerization reactions in complex mixtures containing many catalytic sites. In many cases, regulation is achieved by "gating" substrate access to the active site. Fundamental advances in catalyst design are needed to better understand the factors that enable controlled catalysis in the arena of synthetic chemistry, particularly in achieving substrate gating outside of macromolecular environments. In this Account, the development of design principles for achieving cation-controlled catalysis is described. The guiding hypothesis was that gating substrate access to a catalyst site could be achieved by controlling the dynamics of a hemilabile ligand through secondary Lewis acid/base and/or cation-dipole interactions. To enforce such interactions, catalysts sitting at the interface of organometallic catalysis and supramolecular chemistry were designed. A macrocyclic crown ether was incorporated into a robust organometallic pincer ligand, and these "pincer-crown ether" ligands have been explored in catalysis. Complementary studies of controlled catalysis and detailed mechanistic analysis guided the development of iridium, nickel, and palladium pincer-crown ether catalysts capable of substrate gating. Toggling the gate between open and closed states leads to switchable catalysis, where cation addition/removal changes the turnover frequency or the product selectivity. Varying the degree of gating leads to tunable catalysis, where the activity can be tuned based on the identity and amount of salt added. Research has focused on reactions of alkenes, particularly isomerization reactions, which has in turn led to design principles for cation-controlled catalysts.

Amine-Imine Nickel Catalysts with Pendant O-Donor Groups for Ethylene (Co)Polymerization

The introduction of a secondary interaction is an efficient strategy to modulate transition-metal-catalyzed ethylene (co)polymerization. In this contribution, O-donor groups were suspended on amine-imine ligands to synthesize a series of nickel complexes. By adjusting the interaction between the nickel metal center and the O-donor group on the ligands, these nickel complexes exhibited high activities for ethylene polymerization (up to 3.48 × 10⁶ g_PE·mol_Ni^-1·h^-1) with high molecular weight up to 5.59 × 10⁵ g·mol^-1 and produced good polyethylene elastomers (strain recovery (SR) = 69-81%). In addition, these nickel complexes can catalyze the copolymerization of ethylene with vinyl acetic acid, 6-chloro-1-hexene, 10-undecylenic, 10-undecenoic acid, and 10-undecylenic alcohol to prepare the functionalized polyolefins.

Tailoring Glass Transition Temperature in a Series of Poly(methylene-1,3-cyclopentane-stat-cyclohexane) Statistical Copolymers

A systematic investigation of the synthesis and characterization of a new class of amorphous atactic cis, trans poly(methylene-1,3-cyclopentane-stat-cyclohexane) statistical copolymers (I) is reported. Production of different grades of I that vary with respect to the ratio of 5- and 6-membered cycloalkane repeat units was achieved through the living coordinative chain transfer cyclopolymerization of different initial feed ratios of 1,5-hexadiene and 1,6-heptadiene comonomers. It was determined that the glass transition temperature, T_g, of I can be systematically increased from -16 to 100 °C as a function of increasing 6-membered ring content, although not in a strictly linear fashion. It was further determined that a small level of 6-membered ring content is sufficient to disrupt the crystallinity of the limiting atactic cis, trans poly(methylene-1,3-cyclopentane) (PMCP) homopolymer that possesses a melting temperature, T_m, of 98 °C. These results establish a foundation for future potential technological applications of this unique class of polyolefin copolymers.

Customizing Polymers by Controlling Cation Switching Dynamics in Non-Living Polymerization

Controlling the chain growth process in non-living polymerization reactions is difficult because chain termination typically occurs faster than the time it takes to apply an external trigger. To overcome this limitation, we have developed a strategy to regulate non-living polymerizations by exploiting the chemical equilibria between a metal catalyst and secondary metal cations. We have prepared two nickel phenoxyphosphine-polyethylene glycol variants, one with 2-methoxyphenyl (Ni1) and another with 2,6-dimethoxyphenyl (Ni2) phosphine substituents. Ethylene polymerization studies using these complexes in the presence of alkali salts revealed that chain growth is strongly dependent on electronic effects, whereas chain termination is dependent on both steric and electronic effects. By adjusting the solvent polarity, we can favor polymerizations via non-switching or dynamic switching modes. For example, in a 100:0.2 mixture of toluene/diethyl ether, reactions of Ni1 and both Li⁺ and Na⁺ cations in the presence of ethylene yielded bimodal polymers with different relative fractions depending on the Li⁺/Na⁺ ratio used. In a 98:2 mixture of toluene/diethyl ether, reactions of Ni2 and Cs⁺ in the presence of ethylene generated monomodal polyethylene with dispersity <2.0 and increasing molecular weight as the amount of Cs⁺ added increased. Solution studies by NMR spectroscopy showed that cation exchange between the nickel complexes and alkali cations in 98:2 toluene/diethyl ether is fast on the NMR time scale, which supports our proposed dynamic switching mechanism.

Highly Versatile Strategy for the Production of Telechelic Polyolefins

A general and versatile synthetic strategy for producing practical quantities of a wide range of phenyl-group-terminated hetero- and homotelechelic semicrystalline polyethenes and amorphous atactic and semicrystalline isotactic poly(α-olefins) is reported. The phenyl groups serve as synthons for functionalities of additional classes of telechelic polyolefins that can be "unmasked" through simple high yielding postpolymerization reactions. A demonstration of the value of these materials as building blocks for structural classes of polyolefin-based synthetic polymers was provided by syntheses of well-defined polyolefin-polyester di- and triblock copolymers that were shown to adopt microphase-segregated nanostructured mesophases in the condensed phase.

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n ; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w =8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w =20-50 kDa).

Temporal Control over Two- and Three-State Living Coordinative Chain Transfer Polymerization for Modulating the Molecular Weight Distribution Profile of Polyolefins

A highly versatile new strategy for manipulating the molecular weight profiles, including breadth, asymmetry (skewness) and modal nature (mono-, bi-, and multimodal), of a variety of different polyolefins is reported. It involves temporal control over two- and three-state living coordinative chain transfer polymerization (LCCTP) of olefins in a programmable way. By changing the identity of the R' groups of the chain transfer agent, ER'_n , with time, different populations of chains within a bi- or multimodal polyolefin product can be selectively tagged with different end-groups. By changing the nature of the main-group metal of the CTA, programmed manipulation of the relative magnitudes of the dispersities of the different maxima that make up the final MWD profile can be achieved. This strategy can be implemented with existing LCCTP materials and conventional reactor methods to provide access to scalable and practical quantities of an unlimited array of new polyolefin materials.

Tunable branching and living character in ethylene polymerization using “polyethylene glycol sandwich” α-diimine nickel catalysts

The key effects of polyethylene glycol units as a unique secondary coordination sphere in α-diimine Ni(ii)-mediated ethylene polymerization are comprehensively disclosed.