Preparation of biodegradable, and pH-sensitive poly(azomethine)-chitosan hydrogels for potential application of 5-fluoro uracil delivery

Understanding Degradation Dynamics of Azomethine-containing Conjugated Polymers

Understanding the influence of chemical environments on the degradation properties of conjugated polymers is an important task for the continued development of sustainable materials with potential utility in biomedical and optoelectronic applications. Azomethine-containing polymers were synthesized via palladium-catalyzed direct arylation polymerization (DArP) and used to study fundamental degradation trends upon exposure to acid. Shifts in the UV-vis absorbance spectra and the appearance/disappearance of aldehyde and imine diagnostic peaks within the 1H NMR spectra indicate that the polymers will degrade in the presence of acid. After degradation, the aldehyde starting material was recovered in high yields and was shown to maintain structural integrity when compared with commercial starting materials. Solution-degradation studies found that rates of degradation vary from 5 h to 90 s depending on the choice of solvent or acid used for hydrolysis. Additionally, the polymer was shown to degrade in the presence of perfluoroalkyl substances (PFASs), which makes them potentially useful as PFAS-sensitive sensors. Ultimately, this research provides strategies to control the degradation kinetics of azomethine-containing polymers through the manipulation of environmental factors and guides the continued development of azomethine-based materials.

A Polycaprolactone-Capped ZnO Quantum Dots-Based Fluorometric Sensor for the Detection of Fe3+ Ions in Seawater

Fe3+ ion plays a very active role in life, agriculture, and industry. Human health and the environment are seriously affected by the abnormal presence or excess of this cation. Therefore, the development of a fast, reliable, sensitive, and simple fluorescent probe to detect this cation is crucial. In the present paper, polycaprolactone-capped zinc oxide quantum dots were prepared for the determination of Fe3+ ions. The proposed fluorescent chemosensor exhibited a fluorometric and strong quenching effect toward Fe3+ ions at two wavelengths (303 and 602 nm). The limit of detection (LOD) was calculated as 0.410, and 0.333µM at the mentioned wavelengths. Also, the binding stoichiometric ratio was calculated as 1:1 by Job's plot. The findings indicated that the PCL@ZnO colorimetric chemosensor could be successfully applied with reliable, and good accuracy for the detection of Fe3+ ions in real seawater samples.

Multifunctional thiolated chitosan/puerarin composite hydrogels with pH/glutathione dual responsiveness for potential drug carriers

Puerarin (PUE), a natural and biologically active isoflavone extracted from Chinese medicine Pueraria lobata, can self-assemble to form a hydrogel without other chemical modifications. However, although PUE hydrogel has pH responsivity, but it is difficult to adapt to the changeable pathological environment. Therefore, thiolated chitosan (TCS) is synthesized and hybridized with PUE hydrogel to prepare TCS10/PUE composite hydrogel. The results of rheological measurement showed that the resultant composite hydrogels inherited the low loss performance of TCS hydrogel, which means that they have stronger elasticity. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images displayed that TCS10/PUE composite hydrogel has a fibrous-network structure. X-Ray Diffractometer (XRD) and Fourier transform infrared spectroscopy (FT-IR) proved the existence of hydrogen bonds and disulfide bonds in the formation of composite hydrogel. Degradation experiment showed that TCS10/PUE composite hydrogels have pH and glutathione (pH/GSH) dual sensitivity. Furthermore, TCS10/PUE composite hydrogels exhibited multi-functionality including thixotropy, cytocompatibility, antibacterial and anti-inflammatory properties. Berberine chloride hydrate (BCH) was further used as a model drug for in vitro release study. BCH and PUE could be released cooperatively under pH/GSH dual responsivity. These results indicated that the resultant composite hydrogel has eminent pH/GSH dual responsivity and could act as a potential new intelligent drug carrier.

Composite Hydrogel of Poly(vinyl alcohol) Loaded by Citrus hystrix Leaf Extract, Chitosan, and Sodium Alginate with In Vitro Antibacterial and Release Test

Citrus hystrix leaves have been used traditionally as a spice, a traditional medicine for respiratory and digestive disorders, and a remedy for bacterial infections. This study reports on the synthesis of composite hydrogels using the freeze-thaw method with poly(vinyl alcohol) (PVA) as the building block loaded by C. hystrix leaf extract (CHLE). Additionally, chitosan (CS) and sodium alginate (SA) were also loaded, respectively, to increase the antibacterial activity and to control the extract release of the composite hydrogels. The combinations of the compositions were PVA, PVA/CHLE, PVA/CHLE/CS, PVA/CHLE/SA, and PVA/CHLE/SA/CS. The internal morphology of the hydrogels shows some changes after the PVA/CHLE hydrogel was loaded by CS, SA, and SA/CS. The analysis of the Fourier transform infrared (FTIR) spectra confirmed the presence of PVA, CHLE, CS, and SA in the composite hydrogels. From the X-ray diffraction (XRD) characterization, it was shown that the composite hydrogels maintained their semicrystalline properties with decreasing crystallinity degree after being loaded by CS, SA, and SA/CS, as also supported by differential scanning calorimetry (DSC) characterization. The compressive strength of the PVA/CHLE hydrogel decreases after the loading of CS, SA, and SA/CS, so that it becomes more elastic. Despite being loaded in the composite hydrogels, the CHLE retained its antibacterial activity, as evidenced in the in vitro antibacterial test. The loading of CS succeeded in increasing the antibacterial activity of the composite hydrogels, while the loading of SA resulted in the decrease of the antibacterial activity. The release of extract from the composite hydrogels was successfully slowed down after the loading of CS, SA, and SA/CS, resulting in a controlled release following the pseudo-Fickian diffusion. The cytotoxic activity test proved that all hydrogel samples can be used safely on normal cells up to concentrations above 1000 μg/mL.

Amygdalin/chitosan-polyvinyl alcohol/cerium-tannic acid hydrogel as biodegradable long-time implant for cancer recurrence care applications: An in vitro study

Cancer recurrence following surgery is a serious and worrying problem for the patient. Common treatment strategies, such as chemotherapy, radiotherapy, and surgery, are restricted because of low uptake of the drugs, poor pharmacokinetic properties, and toxicity issues for healthy tissues. The development of engineering platforms for improving the postoperative treatment of cancer can help solve this problem. In this study, the ceria-tannic acid nanoparticles (CeTA-NPs) were successfully synthesized and characterized. Chitosan-polyvinyl/alcohol (CS-PVA) hydrogels containing CeTA NPs (CS-PVA/CeTA) and amygdalin as an anticancer substance were fabricated using freeze-thaw and immersion-drying techniques. The swelling and degradation behaviors, antibacterial activity, and biocompatibility of as-prepared hydrogel were done. The apoptotic effects of amygdalin/CS-PVA/CeTA hydrogel were evaluated by flow cytometry technique on a human colorectal cancer (SW-480) cell line. The CeTA-NPs were investigated as antibacterial and cross-linker agents for greater stability of the hydrogel network. The CS-PVA/CeTA hydrogel demonstrated good safety and antibacterial activity. The results of swelling and biodegradation suggest that CS-PVA/CeTA hydrogels can inspire long-time application. The anticancer effects of the amygdalin/CS-PVA/CeTA hydrogel were confirmed by apoptosis results. Hence, amygdalin/CS-PVA/CeTA hydrogel can be a promising candidate for long-time biomedical application.

pH-responsive magnetic biocompatible chitosan-based nanocomposite carrier for ciprofloxacin release

The pH-sensitive and magnetic-triggered release ensures the effective delivery of drugs. Chitosan carries amine pendants that encourage the fabrication of pH-responsive carriers. Montmorillonite (MMt), an attractive nano-clay in drug delivery possessing high encapsulation properties, was magnetized through the co-precipitation of Fe3+/Fe2+ ions. The study aimed to integrate the magnetic montmorillonite (mMMt) into the chitosan matrix and crosslinked by citric acid (CA) to achieve the nanocomposite carrier with double-responsive features for effective drug delivery. The release evaluation revealed that coating the mMMt with CA-crosslinked chitosan prevented the burst release of Ciprofluxcacin (Cip). The nanocomposite showed a high sustained release, and the release rate in the neutral environment (pH 7.4) was remarkably higher than in acidic media (pH 5.8). The new nanocomposite carrier showed high encapsulation efficiency to Cip (about 98 %). The study was developed by investigating external magnetic effects on the release rate, which lead to an increase in the release rate. The kinetics studies confirmed the diffusion mechanism for Cip release in all experimental media. The Cip-loaded nanocomposite carriers showed antibacterial activity against E. coli and S. aureus.

Controlled Degradation of Polycaprolactone Polymers through Ultrasound Stimulation

This study describes the development of an ultrasound-responsive polymer system that provides on-demand degradation when exposed to high-intensity focused ultrasound (HIFU). Diels-Alder cycloadducts were used to crosslink polycaprolactone (PCL) polymers and underwent a retro Diels-Alder reaction when stimulated with HIFU. Two Diels-Alder polymer compositions were explored to evaluate the link between reverse reaction energy barriers and polymer degradation rates. PCL crosslinked with isosorbide was also used as a non-Diels-Alder-based control polymer. An increase of HIFU exposure time and amplitude correlated with an increase of PCL degradation for Diels-Alder-based polymers. Ultrasound imaging during HIFU allowed for real-time visualization of the on-demand degradation through cavitation-based mechanisms. The temperature surrounding the sample was monitored with a thermocouple during HIFU stimulation; a minimal increase in temperature was observed. PCL polymers were characterized using Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), optical profilometry, and mechanical testing. PCL degradation byproducts were identified by mass spectrometry, and their cytocompatibility was evaluated in vitro. Overall, this study demonstrated that HIFU is an effective image-guided, external stimulus to control the degradation of Diels-Alder-based PCL polymers on-demand.

Synthesis and Characterization of Thermoresponsive Chitosan-graft-poly(N-isopropylacrylamide) Copolymers

Thermoresponsive chitosan-graft-poly(N-isopropylacrylamide) (CS-g-PNIPAAm) copolymers of different composition were synthesized by free-radical polymerization of chitosan (CS) and N-isopropylacrylamide (NIPAAm) in aqueous solution using potassium persulfate (PPS) as an initiator. By changing the molar ratio of CS:NIPAAm from 1:0.25 to 1:10 graft copolymers with a CS backbone and different amounts of PNIPAM side chains were prepared. The chemical structure of the obtained CS-g-PNIPAAm copolymers was confirmed by FTIR and 1H NMR spectroscopy. 1H NMR spectra were also used to calculate the content of attached PNIPAAm side chains. Moreover, the lower critical solution temperature (LCST) behavior of synthesized copolymers was assessed by cloud point, differential scanning calorimetry and particle size measurements. The aqueous solutions of copolymers containing ≥12 molar percent of PNIPAAm side chains demonstrated LCST behavior with the phase separation at around 29.0-32.7 °C. The intensity of thermoresponsiveness depended on the composition of copolymers and increased with increasing content of poly(N-isopropylacrylamide) moieties. The synthesized thermoresponsive chitosan-graft-poly(N-isopropylacrylamide) copolymers could be potentially applied in drug delivery systems or tissue engineering.

pH-Responsive Water-Soluble Chitosan Amphiphilic Core–Shell Nanoparticles: Radiation-Assisted Green Synthesis and Drug-Controlled Release Studies

This work aims to apply water radiolysis-mediated green synthesis of amphiphilic core–shell water-soluble chitosan nanoparticles (WCS NPs) via free radical graft copolymerization in an aqueous solution using irradiation. Robust grafting poly(ethylene glycol) monomethacrylate (PEGMA) comb-like brushes were established onto WCS NPs modified with hydrophobic deoxycholic acid (DC) using two aqueous solution systems, i.e., pure water and water/ethanol. The degree of grafting (DG) of the robust grafted poly(PEGMA) segments was varied from 0 to ~250% by varying radiation-absorbed doses from 0 to 30 kGy. Using reactive WCS NPs as a water-soluble polymeric template, a high amount of DC conjugation and a high degree of poly(PEGMA) grafted segments brought about high moieties of hydrophobic DC and a high DG of the poly(PEGMA) hydrophilic functions; meanwhile, the water solubility and NP dispersion were also markedly improved. The DC-WCS-PG building block was excellently self-assembled into the core–shell nanoarchitecture. The DC-WCS-PG NPs efficiently encapsulated water-insoluble anticancer and antifungal drugs, i.e., paclitaxel (PTX) and berberine (BBR) (~360 mg/g). The DC-WCS-PG NPs met the role of controlled release with a pH-responsive function due to WCS compartments, and they showed a steady state for maintaining drugs for up to >10 days. The DC-WCS-PG NPs prolonged the inhibition capacity of BBR against the growth of S. ampelinum for 30 days. In vitro cytotoxicity results of the PTX-loaded DC-WCS-PG NPs with human breast cancer cells and human skin fibroblast cells proved the role of the DC-WCS-PG NPs as a promising nanoplatform for controlling drug release and reducing the side effects of the drugs on normal cells.

Human Albumin-Based Hydrogels for Their Potential Xeno-Free Microneedle Applications

Nowadays, hydrogels-based microneedles (MNs) have attracted a great interest owing to their outstanding qualities for biomedical applications. For the fabrication of hydrogels-based microneedles as tissue engineering scaffolds and drug delivery carriers, various biomaterials have been tested. They are required to feature tunable physiochemical properties, biodegradability, biocompatibility, nonimmunogenicity, high drug loading capacity, and sustained drug release. Among biomaterials, human proteins are the most ideal biomaterials for fabrication of hydrogels-based MNs; however, they are mechanically weak and poorly processible. To the best of the knowledge, there are no reports of xeno-free human protein-based MNs so far. Here, human albumin-based hydrogels and microneedles for tissue engineering and drug delivery by using relatively new processible human serum albumin methacryloyl (HSAMA) are engineered. The resultant HSAMA hydrogels display tunable mechanical properties, biodegradability, and good biocompatibility. Moreover, the xeno-free HSAMA microneedles display a sustained drug release profile and significant mechanical strength to penetrate the model skin. In vitro, they also show good biocompatibility and anticancer efficacy. Sustainable processible human albumin-based biomaterials may be employed as a xeno-free platform in vivo for tissue engineering and drug delivery in clinical trials in the future.

Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

Drug loading in electrospun nanofibers has gained a lot of attention as a novel method for direct drug release in an injury site to accelerate wound healing. The present study deals with the fabrication of silk fibroin (SF)-chitosan (CS)-silver (Ag)-curcumin (CUR) nanofibers using the electrospinning method, which facilitates the pH-responsive release of CUR, accelerates wound healing, and improves mechanical properties. Response surface methodology (RSM) was used to investigate the effect of the solution parameters on the nanofiber diameter and morphology. The nanofibers were characterized via Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential, and Dynamic Light Scattering (DLS). CS concentration plays a crucial role in the physical and mechanical properties of the nanofibers. Drug loading and entrapment efficiencies improved from 13 to 44% and 43 to 82%, respectively, after the incorporation of Ag nanoparticles. The application of CS hydrogel enabled a pH-responsive release of CUR under acid conditions. The Minimum Inhibitory Concentration (MIC) assay on E. coli and S. aureus bacteria showed that nanofibers with lower CS concentration cause stronger inhibitory effects on bacterial growth. The nanofibers do not have any toxic effect on cell culture, as revealed by in vitro wound healing test on NIH 3T3 fibroblasts.

Development of Carboxymethyl Chitosan Nanoparticles Prepared by Ultrasound-Assisted Technique for a Clindamycin HCl Carrier

Polymeric nanoparticles are one method to modify the drug release of small hydrophilic molecules. In this study, clindamycin HCl was used as a model drug loaded in carboxymethyl chitosan nanoparticles cross-linked with Ca2+ ions (CMCS-Ca2+). The ultrasonication with experimental design was used to produce CMCS-Ca2+ nanoparticles loading clindamycin HCl. The model showed that the size of nanoparticles decreased when amplitude and time increased. The nanoparticle size of 318.40 ± 7.56 nm, decreased significantly from 543.63 ± 55.07 nm (p < 0.05), was obtained from 75% of amplitude and 180 s of time, which was one of the optimal conditions. The clindamycin loading content in this condition was 34.68 ± 2.54%. The drug content in nanoparticles showed an inverse relationship with the size of the nanoparticles. The sodium carboxymethylcellulose film loading clindamycin HCl nanoparticles exhibited extended release with 69.88 ± 2.03% drug release at 60 min and a gradual increase to 94.99 ± 4.70% at 24 h, and demonstrated good antibacterial activity against S. aureus and C. acne with 40.72 ± 1.23 and 48.70 ± 1.99 mm of the zone of inhibition at 24 h, respectively. Thus, CMCS-Ca2+ nanoparticles produced by the ultrasound-assisted technique could be a potential delivery system to modify the drug release of small hydrophilic antibiotics.

Chitosan based adsorbents for the removal of phosphate and nitrate: A critical review

The tremendous development in the industrial sector leads to discharging of the several types of effluents containing detrimental contaminants into water sources. Lately, the proliferation of toxic anions particularly phosphates and nitrates onto aquatic systems certainly depreciates the ecological system and causes a deadly serious problem. Chitosan (Cs) is one of the most auspicious biopolymer adsorbents that are being daily developed for removing of various contaminants from polluted water. This is due to its unparalleled benefits involving biocompatibility, non-toxicity, facile modifications and low-cost production. Nevertheless, chitosan displays considerable drawbacks including low adsorption capacity, low surface area and lack of reusability. Therefore, few findings have been established regarding the aptitude of modified chitosan-based adsorbents towards phosphate and nitrate anions. This review elaborates an overview for the current advances of modified chitosan based-adsorbent for phosphate and nitrate removal, in specific multivalent metals-modified chitosan, clays and zeolite-modified chitosan, magnetic chitosan and carbon materials-modified chitosan. The efforts that have been executed for enriching their adsorption characteristics as well as their possible adsorption mechanisms and reusability were well addressed. Besides, the research conclusions for the optimum adsorption conditions were also discussed, along with emphasizing the foremost research gaps and future potential trends that could motivate further research and innovation to find best solutions for water treatment problems facing the world.