Effects of pH on self-assembly of silver carp myosin at low temperature

Characteristics and stabilization of Pickering emulsions constructed using myosin from bighead carp (Aristichthys nobilis)

Myosin from bighead carp (Aristichthys nobilis) as a main type of fish protein possesses a good emulsifying ability. However, whether bighead carp myosin (BCM) could construct stable Pickering emulsions is still unclear. Therefore, myosin particles and Pickering emulsions stabilized by bighead carp myosin (BCMPEs) were analyzed. The surface structure of BCM particles at 0.6 mol/L NaCl treatment was uniform and compact with a contact angle of 86.4 ± 2.7°, exhibiting the potential ability to construct O/W Pickering emulsions. The size and flocculation index (FI) of BCMPEs decreased with the increase in BCM concentrations of 1%-4% (w/v). Reversely, the size of BCMPEs increased with the increase in oil-water ratios. BCM particles could uniformly distribute at the oil-water interface to stabilize BCMPEs at a BCM concentration of 4% (w/v) and an oil-water ratio of 6:4 (v/v). This study could help explore fish proteins to construct Pickering emulsions for the deep processing of fish products.

Improved emulsifying properties of water-soluble myofibrillar proteins at acidic pH conditions: Emphasizing pH-regulated electrostatic interactions with chitosan

Water-soluble muscle protein with enhanced functionalities has attracted great interest for low-salt food design. Electrostatic interactions of chitosan (CS) with myofibrillar proteins (MP) in water-aqueous solution at acidic pHs (4.0-6.5) were investigated, and how pH regulated complex formation, microstructures, conformation changes, and emulsifying capacity was systematically explored. At pH 4.0-4.5, MP and CS were positively charged and displayed a co-soluble system, exhibiting small particles and high solubility. When the pH increased to near the isoelectric point (pI) of MP (pH 5.0-6.0), electrostatic interactions largely inhibited the aggregation of MP by forming smaller particle complexes. The flexible structures and improved amphiphilic properties promoted protein absorption at the oil-water interface, further improving the emulsion stability. When the pH increased to 6.5, large aggregates were formed causing poor functionalities. This study could provide great insights to further exploit meat-protein-based low-salt functional foods in novel food design.

Elucidating the molecular mechanism of water migration in myosin gels of Nemipterus virgatus during low pressure coupled with heat treatment

The relationship between myosin denaturation, aggregation and water migration in Nemipterus virgatus myosin gels with different treatment processes under optimal low pressure coupled with heat treatment was investigated to clarify the molecular mechanism of water migration. With the different treatment processes, the proportion of bound water of the myosin gels increased significantly (P < 0.05). Denaturation of myosin S1 sub-fragments and α-helical unfolding during different treatment processes led to an increase in β-sheets content. These promote increased exposure of Try residues and hydrophobic groups of myosin, formation of clathrate hydrates, and reduced mobility of bound water. Furthermore, hydrophobic interactions and disulfide bonds caused the head-head and head-hinge to coalesce into a 3D honeycomb network with greater fractal dimension, less lacunarity, smaller water hole diameter and more water holes. This increased the capillary pressure experienced by the bound water, causing immobile water to migrate towards the bound water. The present study may be necessary to improve the mechanism of water migration in protein gel systems and to promote the industrial application of high pressure processing technology in surimi-based foods.

Effects of blackberry (Rubus spp.) polysaccharide on the structure and thermal behavior of the myofibrillar protein of chicken breast meat

Blackberry crude polysaccharides (BCP) was added to chicken breast to inspect the intermolecular interaction with myofibrillar protein (MP). The influence of BCP on the thermal transformation behavior and protein micro-structure during temperature rise period was studied. The results showed that the interaction between BCP and MP was mainly affected by the concentration of BCP and heating temperature. The results of infrared spectrophotometer and nano-particle/zeta potentiometer showed that a BCP-MP complex was generated through hydrogen bond and electrostatic interaction, which could promote the transformation of MP from β-folding to β-Angle transformation. The fluorescence spectra showed that the BCP was helped to the spread of protein structure of the MP. Moreover, synchronous thermal analyzer and rheometer results revealed that the BCP increased the enthalpy value and elastic modulus of MP. Scanning electron microscope verified pores inside the BCP-MP complex are more evenly distributed and smaller, which led to the high cross-linking of network and good stability of water distribution for the MP. The addition of BCP enhances the hydrogen bonds and disulfide bonds of MP molecules, which can strengthen the network structure and ultimately improve the performance of meat products.

Regulation of Protein Flexibility and Promoting the Cod Protein Gel Formation Using Ultrasound Treatment

In order to obtain a soft-textured protein gel suitable for the elderly, the cod protein gel was prepared by improving the protein flexibility under ultrasound treatment. It has been found that the increase in ultrasonic power, protein flexibility, particle size, ζ-potential, surface hydrophobicity, and α-helix content of preheated cod protein exhibited an increasing trend. The improvement of protein flexibility promoted uniformity and density of the gel network, water retention, and texture properties. The flexibility of preheated cod protein increased to 0.189, the water holding capacity of the gel reached up to 99.41%, and the hardness increased to 49.12 g, as the ultrasonic power level increased to 400 W. Protein flexibility was correlated well with the cohesiveness of the gel. The storage modulus (G') initially decreased and then increased during the heating-cooling process. The attractive forces forming between the flexible protein molecules during cooling in the ultrasound treatment groups promoted protein self-assembly aggregation and formed the cod protein gel. The gel obtained at 100-400 W could be categorized as Level 6─soft and bite-sized according to the International Dysphagia Diet Standardization Initiative (IDDSI) framework, indicating that the cod protein gel has potential as an easy-to-swallow diet for the elderly.

Insight into Ionic Strength-Induced Solubilization of Myofibrillar Proteins from Silver Carp (Hypophthalmichthys molitrix): Structural Changes and 4D Label-Free Proteomics Analysis

In this study, changes in the physical, structural, and assembly characteristics of silver carp myofibrillar proteins (MPs) at different ionic strength (I) values were investigated. Moreover, the differential proteomic profile of soluble MPs was analyzed using 4D proteomics based on timsTOF Pro mass spectrometry. Solubility of MPs significantly increased at high I (>0.3), and the increase in I enhanced the apparent viscosity, fluorescence intensity, surface hydrophobicity, and α-helix content of MPs solution. Particle size and sodium dodecyl sulfate-polyacrylamide gel electrophoresis patterns also supported the solubility profiles. Transmission electron microscopy and atomic force microscopy observations revealed the morphological assembly and disassembly of MPs under different I conditions. Finally, proteomic analysis revealed the evolution law of salt-induced solubilization of MPs and the critical molecular characteristics in different I environments. The number of differentially abundant proteins (DAPs) decreased with the increase of I, and most DAPs related to the muscle filament sliding, contraction and assembly, actinin binding, and actin filament binding. The soluble abundance of myosin and some structural proteins was dependent on I, and structural proteins in the Z-disk and M-band might contribute to the solubilization of myosin. Our findings provide insightful information about the impact of common I on the solubility pattern of MPs from freshwater fish.

Improvement of functional characteristics of Hypophthalmichthys molitrix protein by modification with chitosan oligosaccharide

In the food processing field, it is very often that fish proteins are denatured affecting the nutritional value of the product which is vital to be solved. By using appropriate sugar donors for glycosylation with protein, improving the stability and emulsification properties of fish proteins can be achieved. This research looks into the impacts of enzymatic chitosan oligosaccharide (CO) at various concentration (0.15%, 0.30%, 0.45%, 0.60%, w/v) upon the molecular makeup and function of silver carp myofibrillar protein (MP) in an attempt to comprehend the impact of electrostatic binding among MP as well as CO on protein conformation. Analysis was done on the impact of various CO concentrations upon MP's secondary structure, conformational changes, and functional characteristics. Twelve sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) assays were implemented to monitor MP; Fourier transform infrared spectroscopy, endogenous fluorescence spectroscopy, and UV absorption spectra were carried out to investigate the influence of CO on MP; Particle size distribution, emulsifying activity index (EAI), solubility, turbidity, sulfhydryl content, carbonyl content, foaming capacity, surface hydrophobicity, emulsifying stability index (ESI), and foam persistence were all investigated. In addition, we used dynamic light scattering, scanning electron microscope, and atomic force microscope to analyze myosin (MO) and 0.60% CO-MO complex. The results demonstrated that CO and MP form complexes through hydrogen bonding and electrostatic interactions. CO modification not only delayed the oxidation of MP but also promoted MP to show better solubility, foaming, and foaming stability. In addition, CO modified myosin particle size decreased, reducing myosin's roughness and making myosin's structure more compact. To sum up, molecular interaction could change functional characteristics, and products with special properties could be developed after modification with chitosan oligosaccharide.

Conformation changes and emulsifying properties of myofibrillar proteins in water: Effects of electrostatic interaction with chitosan

Great interests have been attracted toward muscle protein in a water-soluble state with improved functionality for further designing meat protein fortified low-salt functional foods. In the present study, electrostatic interaction of chitosan (CH) with myofibrillar proteins (MP) in water aqueous solution was investigated, and the linked structure changes and emulsion stabilization of MP were studied. Results showed that the electrostatic interaction inhibited MP aggregation, and smaller particle size complexes were formed at pH 6.0, leading to the loss of β-sheet contents and recovery of α-helix contents with decreasing MP/CH mixing ratio (5:1 and 1:1). The tertiary structure confirmed the conformation changes of MP in which more hydrophobic groups and active sulfhydryl groups were exposed (P < 0.05), and the fluorescence was also quenched. With decreasing mixing ratio, the droplet size of emulsion decreased (P < 0.05), while the absorbed protein content increased (P < 0.05). After 7 d of storage, complex at a ratio of 1:1 displayed desirable emulsion stability, which could be due to the improved emulsifying capacity, enhanced electrostatic repulsion and steric effects. These findings provide a better understanding of conformation changes of MP in water aqueous solution induced by electrostatic interactions at mild acidic pH and help to fabricate stable protein/polysaccharide emulsification systems for further developing meat protein-based functional food to deliver health.

Changes in Gelation Properties of Silver Carp Myosin Treated by Combination of High Intensity Ultrasound and NaCl

The molecular behavior of myosin in a low-salt environment limited the production of surimi-based products. This study aimed to investigate the effect of the combination of high intensity ultrasound (HIU) and NaCl (0.1, 0.3, 0.5 mol/L) on the physicochemical indexes of myosin. The changes were evaluated by solubility, ultraviolet (UV) spectroscopy, dynamic rheological properties, water holding capacity (WHC), microstructures, etc. For control samples, the gelation properties of myosin strengthened upon NaCl increasing. Combination of HIU and NaCl significantly improved the solubility of myosin, which was due to the conformational changes and the exposure of reactive groups. Meanwhile, the particle size of myosin obviously decreased when observed by atomic force microscope, which in turn promoted the stability of myosin. Furthermore, the improvement in solution behaviors of myosin treated by combination of HIU and NaCl contributed to the gelation properties as well as the formation of compact microstructures, which obtained high WHC and low cooking loss of myosin gels. In conclusion, combination of HIU and NaCl induced the unfolding of myosin with the exposure of reactive groups, consequently facilitating the formation of denser microstructures. Moreover, the biggest degree of improvement in gelation properties was observed at 0.1 mol/L NaCl combined with HIU.

Assessment of In Vitro Digestive Behavior of Lactic-Acid-Bacteria Fermented Soy Proteins: A Study Comparing Colloidal Solutions and Curds

This study investigated the effect of lactic-acid-bacteria fermentation on the microstructure and gastrointestinal digestibility of soy proteins using a digestomics approach. Fermented soy protein isolates (FSPIs) under varied fermentation-terminal pH demonstrated a colloidal solution (FSPI-7.0/6.0) or yogurt-like curd (FSPI-5.0/4.0) state. Cryo-electron microscopy figures demonstrated the loosely stacked layer of FSPI-7.0/6.0 samples, whereas a denser gel network was observed for FSPI-5.0/4.0 samples. Molecular interactions shifted from dominant ionic bonds to hydrophobic forces and disulfide bonds. The gastric/intestinal digestion demonstrated that the curd samples afforded a significantly low particle size and high-soluble protein and peptide contents in the medium and late digestive phases. A peptidomics study showed that the FSPI-6.0 digestate at early intestinal digestion had a high peptidome abundance, whereas FSPI curd digestates (FSPI-5.0/4.0) elicited a postponed but more extensive promotion during medium and late digestion. Glycinin G2/G4 and β-conglycinin α/α' subunits were the major subunits promoted by FSPI-curds. The spatial structures of glycinin G2 and β-conglycinin α subunits demonstrated variations located in seven regions. Glycinin G2 region 6 (A349-K356) and β-conglycinin α subunit region 7 (E556-E575), which were located at the interior of the 3D structure, were the key regions contributing to discrepancies at the late stage.

Role of low molecular additives in the myofibrillar protein gelation: underlying mechanisms and recent applications

Understanding mechanisms of myofibrillar protein gelation is important for development of gel-type muscle foods. The protein-protein interactions are largely responsible for the heat-induced gelation. Exogenous additives have been extensively applied to improve gelling properties of myofibrillar proteins. Research has been carried out to investigate effects of different additives on protein gelation, among which low molecular substances as one of the most abundant additives have been recently implicated in the modifications of intermolecular interactions. In this review, the processes of myosin dissociation under salt and the subsequent interaction via intermolecular forces are elaborated. The underlying mechanisms focusing on the role of low molecular additives in myofibrillar protein interactions during gelation particularly in relation to modifications of the intermolecular forces are comprehensively discussed, and six different additives i.e. metal ions, phosphates, amino acids, hydrolysates, phenols and edible oils are involved. The promoting effect of low molecular additives on protein interactions is highly attributed to the strengthened hydrophobic interactions providing explanations for improved gelation. Other intermolecular forces i.e. covalent bonds, ionic and hydrogen bonds could also be influenced depending on varieties of additives. This review can hopefully be used as a reference for the development of gel-type muscle foods in the future.

Gel performance of surimi induced by various thermal technologies: A review

Heating is a vital step in the gelation of surimi. Conventional water bath heating (WB) has the advantages of easy operation and low equipment requirements. However, the slow heat penetration during WB may lead to poor gel formation or gels prone to deterioration, especially with one-step heating. The two-step WB is time-consuming, and a large amount of water used tends to cause environmental problems. This review focuses on key factors affecting the quality of surimi gels in various heating technologies, such as surimi protein structure, chemical forces, or the activity of endogenous enzymes. In addition, the relationships between these factors and the gel performance of surimi under various heating modes are discussed by analyzing the heating temperature and heating rate. Compared with WB, the gel performance can be improved by controlling the heating conditions of microwave heating and ohmic heating, which are mainly achieved by changing the molecular structure of myofibrillar proteins or the activity of endogenous enzymes in surimi. Nevertheless, the novel thermal technologies still face several limitations and further research is needed to realize large-scale industrial production. This review provides ideas and directions for developing heat-induced surimi products with excellent gel properties.

The Conformational Structural Change of Soy Glycinin via Lactic Acid Bacteria Fermentation Reduced Immunoglobulin E Reactivity

This study investigated the fermentation of isolated soy glycinin by using the Lactiplantibacillus plantarum B1-6 strain, its reduction effect on immunoglobulin E (IgE) reactivity, the relationship with protein aggregation/gelation state and conformational changes. Fermentation was performed under different glycinin concentrations (0.1%, 0.5%, 1% and 2%, w/v) and varied fermentation terminal pH levels (FT-pH) (pH 6.0, 4.5, 4.0 and 3.5). L. plantarum B1-6 showed potency in reducing immunoreactivity to 0.10–69.85%, as determined by a sandwich enzyme-linked immunosorbent assay. At a FT-pH of 6.0 and 4.5, extremely low IgE reactivity (0.1–22.32%) was observed. Fermentation resulted in a great increase (2.31–6.8-fold) in particle size and a loss of intensity in A3 and basic subunits. The conformation of glycinin was altered, as demonstrated by improved surface hydrophobicity (1.33–7.39-fold), decreased intrinsic fluorescence intensity and the α-helix structure. Among the four selected concentrations, glycinin at 1% (w/v, G-1) evolved the greatest particles during fermentation and demonstrated the lowest immunoreactivity. Principal component analysis confirmed that particle size, intrinsic fluorescence intensity, α-helix and ionic bond were closely related to immunoreactivity reduction.

Tracking aggregation behaviour and gel properties induced by structural alterations in myofibrillar protein in mirror carp (Cyprinus carpio) under the synergistic effects of pH and heating

The synergistic effect of pH and heating on the structure, aggregation behaviour and gel properties of myofibrillar protein (MP) in mirror carp (Cyprinus carpio) was evaluated. The surface hydrophobicity of the control at pH 5.0 (143.6 ± 0.3 μg) was significantly higher than that of other samples (P < 0.05). Under the same pH conditions, the decrease in total sulfhydryl content of all samples during the heating process demonstrated that covalent/non-covalent cross-linking occurred between proteins due to heat input. Moreover, the decrease in solubility and the increase in turbidity of all samples verified the fact of MP aggregation, and the changes in the elasticity index (EI) and macroscopic viscosity index (MVI) also indicated a decrease in MP fluidity upon heating treatment. Therefore, the aggregation of MP was affected by pH and heating, and the optimal three-dimensional network structure and gel properties could be formed at pH 6.0 and above 70 °C.

Effects of different ultrasound frequencies on the structure, rheological and functional properties of myosin: Significance of quorum sensing

Structure and rheological properties of myosin in myofibrillar protein (MP) after single frequency pulsed ultrasound (SFPU, G1-G2) and dual frequency pulsed ultrasound (DFPU, G3) were compared for the first time. Results showed SFPU and DFPU induced "stress response" through the action of cavitation on multiple myosin. In addition, there may be a certain quorum sensing among myosin, inducing a more stable β-antiparallel structure to resist negative effects of cavitation force. Results of particle size and synchronous fluorescence indicated that structure of myosin in MPs changed through stress. The increase in pH also assisted in the ultrasound process (G5-G7). Notably, DFPU induced stronger quorum sensing and formed a more stable structure. More so, effects of (-)-epigallocatechin-3-gallate (EGCG) and baicalein (BN) on the emulsion and gel properties of DFPU treated and non-treated MPs were also investigated. Results showed that ultrasound increased the stability of emulsion. Additionally, the texture and expressible moisture content (EMOC) of the gel were also improved after treatment.