Identification and screening of multiple tropical microalgal strains for antioxidant activity in vitro

Evaluation of Nutraceutical Properties of Eleven Microalgal Strains Isolated from Different Freshwater Aquatic Environments: Perspectives for Their Application as Nutraceuticals

The increasing global population and the simultaneous growing attention to natural, sustainable, and healthier products are driving the food industry towards research on alternative food sources. In this scenario, microalgae are gaining worldwide attention as "functional feedstocks" for foods, feeds, supplements, and nutraceutical formulations, being a source of high-value metabolites including polyphenols and other antioxidant compounds. In this work, eleven microalgal strains from freshwater environments were evaluated for their nutraceutical properties, focusing on photosynthetic pigments, total polyphenols, and flavonoid content, as well as in vitro antioxidant activities. Data helped to select those strains showing the most promising features for simultaneous massive growth and bioactive compound production. Results highlighted that the microalgae have variable values for both biochemical parameters and antioxidant activities, mainly depending on the solvents and applied treatment rather than on the isolation sources or the phylogenetic attribution. According to our results, the putative best candidates for massive cultivation under laboratory conditions for the simultaneous extraction of different molecules with nutraceutical potential are strains F1 (Scenedesmaceae), F3 (Chlamydomonas debariana), R1 (Chlorella sorokiniana), and C2 (Chlorella-like).

The Upcoming 6Li Isotope Requirements Might Be Supplied by a Microalgal Enrichment Process

Lithium isotopes are essential for nuclear energy, but new enrichment methods are required. In this study, we considered biotechnology as a possibility. We assessed the Li fractionation capabilities of three Chlorophyte strains: Chlamydomonas reinhardtii, Tetraselmis mediterranea, and a freshwater Chlorophyte, Desmodesmus sp. These species were cultured in Li containing media and were analysed just after inoculation and after 3, 12, and 27 days. Li mass was determined using a Inductively Coupled Plasma Mass Spectrometer, and the isotope compositions were measured on a Thermo Element XR Inductively Coupled Plasma Mass Spectrometer. The maximum Li capture was observed at day 27 with C. reinhardtii (31.66 µg/g). Desmodesmus sp. reached the greatest Li fractionation, (δ⁶ = 85.4‰). All strains fractionated preferentially towards ⁶Li. More studies are required to find fitter species and to establish the optimal conditions for Li capture and fractionation. Nevertheless, this is the first step for a microalgal nuclear biotechnology.

Combining patterned membrane filtration and flocculation for economical microalgae harvesting

Membranes have a lot of potential for harvesting microalgae, but mainly membrane fouling and high harvesting costs linked to low fluxes are hampering their breakthrough. Patterned membranes can reduce fouling by enchancing local turbulences close to the membrane surface on one hand, and by increasing the active area per m² of installed membrane on the other. Flocculation can further increase membrane permeance by increasing microalgal partical size and reducing the fraction of free organic matter in the feed. In current study, the effect of polyethylene glycol (PEG) in the casting solution of patterned polysulfone membranes was investigated to better tune the performance of the patterned membranes, together with the effects of cross-flow velocity and chitosan dosage on membrane fouling. The energy consumption and total harvesting cost, extrapolated to a full-scale microalgal harvesting, were then estimated. The patterned membrane prepared with a 28w% PEG concentration showed the highest clean water permeance (900±22 L/m² h bar) and membrane permeance in a microalgal suspension (590±17 L/m² h bar). Patterned membranes showed a lower filtration resistance (15% permeance decline at the end of filtration) than flat membranes (72%) at a cross-flow velocity of 0.0025 m/s. Increasing cross-flow velocity could increase membrane permeance in most cases. The highest stable membrane permeance (110±17 L/m² h bar) and the lowest filtration resistance were achieved when combining patterned membrane filtration with flocculation at optimized chitosan dosage. A very low energy consumption (0.28 kWh/kg) and harvesting cost (0.16 €/kg) were achieved under these conditions.

Harvesting microalgal biomass using negatively charged polysulfone patterned membranes: Influence of pattern shapes and mechanism of fouling mitigation

Membranes have a lot of potential for harvesting microalgae, but membrane fouling is hampering their breakthrough. In this study, the effects of charge and corrugated surface on membrane filtration performance were investigated. The clean water permeance (CWP), the microalgae harvesting efficiency and the membrane flux for a microalgal broth were determined using patterned polysulfone (PSf) membranes with different shapes of the surface patterns and containing different charge densities by blending sulfonated polysulfone (sPSf). The flow behavior near the patterned membrane surface, as well as the interaction energy between membrane and microalgae were investigated using computational fluid dynamics (CFD) simulation and the improved extended "Derjaguin, Landau, Verwey, Overbeek" (XDLVO) theory, respectively. Membrane charge and pattern shape significantly improve the membrane performance. The critical pressures of all sPSf blend patterned membranes were higher than 2.5 bar. A 4.5w% sPSf blend patterned membranes with wave patterns showed the highest CWP (2300 L/m² h bar) and membrane flux in the microalgal broth (1000 L/m² h bar) with 100% harvesting efficiency. XDLVO analysis showed that sPSf blend patterned membranes prepared obtained the lowest interaction energy and highest energy barrier for microalgal attachment. CFD simulation showed a higher velocity and wall shear on the pattern apexes.