Development of Lactobacillus acidophilus LA5-loaded whey protein isolate/lactose bionanocomposite powder by electrospraying: A strategy for entrapment

Cheese Whey Protein and Blueberry Juice Mixed Fermentation Enhance the Freeze-Resistance of Lactic Acid Bacteria in the Freeze-Drying Process

The effects of MRS, whey protein and blueberry alone, and mixed fermentation on the survival rate of lactic acid bacteria under various freeze-drying conditions were investigated. The surface structure of the freeze-dried powders was also investigated to explore the anti-freezing protection mechanism of mixed whey protein and blueberry fermentation on the bacteria. It was found that the mixed fermentation medium of blueberry and whey protein has a protective effect on the freeze-drying bacteria and is better than the traditional MRS and whey protein medium. The optimal concentration of blueberry juice addition was 9%. The survival rate of the pre-freezing temperature at -80 °C was higher than at -20 °C after the pre-freezing and freeze-drying processes. The freeze-drying thickness of 0.3 cm could improve the survival rate of the bacteria. The Fourier transform infrared spectroscopy results indicated the interaction between the whey protein, anthocyanins, and the surface composition of the lactic acid bacteria.

Polysaccharides and proteins-based bionanocomposites for microencapsulation of probiotics to improve stability and viability in the gastrointestinal tract: A review

Probiotics have recently received significant attention due to their various benefits, such as the modulation of gut flora, reduction of blood sugar and insulin resistance, prevention and treatment of digestive disorders, and strengthening of the immune system. One of the major issues concerning probiotics is the maintenance of their viability in the presence of digestive conditions and extended shelf life during storage. To address this concern, numerous techniques have been explored to achieve success. Among these methods, the microencapsulation of probiotics has been proposed as the most effective way to overcome this challenge. The combination of nanomaterials with biopolymer coating is considered a novel approach to improve its viability and effective delivery. The use of polysaccharides and proteins-based bionanocomposites for microencapsulation of probiotics has emerged as an efficient and promising approach for maintaining cell viability and targeted delivery. This review article aims to investigate the use of different bionanocomposites in microencapsulation of probiotics and their effect on cell survival in long-term storage and harsh conditions in the gastrointestinal tract.

Emerging Multiscale Biofabrication Approaches for Bacteriotherapy

Bacteriotherapy is emerging as a strategic and effective approach to treat infections by providing putatively harmless bacteria (i.e., probiotics) as antagonists to pathogens. Proper delivery of probiotics or their metabolites (i.e., post-biotics) can facilitate their availing of biomaterial encapsulation via innovative manufacturing technologies. This review paper aims to provide the most recent biomaterial-assisted strategies proposed to treat infections or dysbiosis using bacteriotherapy. We revised the encapsulation processes across multiscale biomaterial approaches, which could be ideal for targeting different tissues and suit diverse therapeutic opportunities. Hydrogels, and specifically polysaccharides, are the focus of this review, as they have been reported to better sustain the vitality of the live cells incorporated. Specifically, the approaches used for fabricating hydrogel-based devices with increasing dimensionality (D)-namely, 0D (i.e., particles), 1D (i.e., fibers), 2D (i.e., fiber meshes), and 3D (i.e., scaffolds)-endowed with probiotics, were detailed by describing their advantages and challenges, along with a future overlook in the field. Electrospinning, electrospray, and 3D bioprinting were investigated as new biofabrication methods for probiotic encapsulation within multidimensional matrices. Finally, examples of biomaterial-based systems for cell and possibly post-biotic release were reported.

Electrospinning and Electrospraying: Emerging Techniques for Probiotic Stabilization and Application

Probiotics are beneficial for human health. However, they are vulnerable to adverse effects during processing, storage, and passage through the gastrointestinal tract, thus reducing their viability. The exploration of strategies for probiotic stabilization is essential for application and function. Electrospinning and electrospraying, two electrohydrodynamic techniques with simple, mild, and versatile characteristics, have recently attracted increased interest for encapsulating and immobilizing probiotics to improve their survivability under harsh conditions and promoting high-viability delivery in the gastrointestinal tract. This review begins with a more detailed classification of electrospinning and electrospraying, especially dry electrospraying and wet electrospraying. The feasibility of electrospinning and electrospraying in the construction of probiotic carriers, as well as the efficacy of various formulations on the stabilization and colonic delivery of probiotics, are then discussed. Meanwhile, the current application of electrospun and electrosprayed probiotic formulations is introduced. Finally, the existing limitations and future opportunities for electrohydrodynamic techniques in probiotic stabilization are proposed and analyzed. This work comprehensively explains how electrospinning and electrospraying are used to stabilize probiotics, which may aid in their development in probiotic therapy and nutrition.

Development of Mucoadhesive Electrospun Scaffolds for Intravaginal Delivery of Lactobacilli spp., a Tenside, and Metronidazole for the Management of Bacterial Vaginosis

Bacterial vaginosis (BV) is an infection of the vagina associated with thriving anaerobes, such as Gardnerella vaginitis and other associated pathogens. These pathogens form a biofilm responsible for the recurrence of infection after antibiotic therapy. The aim of this study was to develop a novel mucoadhesive polyvinyl alcohol and polycaprolactone electrospun nanofibrous scaffolds for vaginal delivery, incorporating metronidazole, a tenside, and Lactobacilli. This approach to drug delivery sought to combine an antibiotic for bacterial clearance, a tenside biofilm disruptor, and a lactic acid producer to restore healthy vaginal flora and prevent the recurrence of bacterial vaginosis. F7 and F8 had the least ductility at 29.25% and 28.39%, respectively, and this could be attributed to the clustering of particles that prevented the mobility of the crazes. F2 had the highest at 93.83% due to the addition of a surfactant that increased the affinity of the components. The scaffolds exhibited mucoadhesion between 31.54 ± 0.83% and 57.86 ± 0.95%, where an increased sodium cocoamphoacetate concentration led to increased mucoadhesion. F6 showed the highest mucoadhesion at 57.86 ± 0.95%, as compared to 42.67 ± 1.22% and 50.89 ± 1.01% for the F8 and F7 scaffolds, respectively. The release of metronidazole via a non-Fickian diffusion-release mechanism indicated both swelling and diffusion. The anomalous transport within the drug-release profile pointed to a drug-discharge mechanism that combined both diffusion and erosion. The viability studies showed a growth of Lactobacilli fermentum in both the polymer blend and the nanofiber formulation that was retained post-storage at 25 °C for 30 days. The developed electrospun scaffolds for the intravaginal delivery of Lactobacilli spp., along with a tenside and metronidazole for the management of bacterial vaginosis, provide a novel tool for the treatment and management of recurrent vaginal infection.

Opopanax gum and essential oil-based antimicrobial film reinforced with bismuth oxide nanoparticles: Production, characterization, and application in the storage of quail fillets

The aim of this study was to the production of an active film based on Prangos ferulacea root gum, using its leaf's essential oil (PFEO) (0-3 %) and bismuth oxide nanoparticles (Bi₂O₃NPs) (0-3 %). Then, the developed film was used for packaging of quail fillet. Response surface methodology was used to evaluate the effect of PFEO and Bi₂O₃NPs on films' properties. Optimum formulation, including 1.5 % PFEO and 1 % Bi₂O₃NPs, was achieved based on numerical optimization. The optimum film was produced and compared with the control film (based on Prangos ferulacea root gum, without PFEO and Bi₂O₃NPs). According to the results, adding PFEO and Bi₂O₃NPs to the film formulation increased the thickness and antioxidant activity of the film and decreased moisture content, solubility, water vapor permeability, and whiteness index (p < 0.05). The optimum film indicated high antimicrobial effects on Escherichia coli and Staphylococcus aureus. The pH, TVBN, TBA values, coliform, and total bacterial counts of quail fillet packed with the optimum film were lower and sensorial scores were higher than the control samples during the storage(p < 0.05).

Efficacy of the incorporation between self-encapsulation and cryoprotectants on improving the freeze-dried survival of probiotic bacteria

AIMS

This study aimed to improve the viability of probiotic bacteria during freeze-drying by the combination of self-encapsulation and cryoprotectants.

METHODS AND RESULTS

Lactiplantibacillus plantarum VAL6 and Lactobacillus acidophilus VAR1 were exposed to environmental stresses including temperature, pH, and increased CO₂ concentration before performing freeze-drying with the addition of cryoprotectants. The results proved that tested stresses can stimulate the bacteria to synthesize more extracellular polymeric substances to form self-encapsulation that increases their freeze-dried viability. In combination with cryoprotectants to form double-layered microencapsulation, L. plantarum VAL6 stressed at pH 3.5 in combination with whey protein isolate could achieve the highest Improving Cell Viability of 4,361 fold, while L. acidophilus VAR1 stressed at 25^o C in combination with alginate gave a maximum Improving Cell Viability of 73.33 fold.

CONCLUSIONS

The combination of self-encapsulation and cryoprotectants significantly improves the freeze-dried viability of probiotics.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report that uses environmental stress to stimulate EPS synthesis for self-encapsulation formation combined with the addition of cryoprotectants to enhance to the freeze-dried survival of probiotics. This could be a novel approach in improving the viability of probiotic strains for various applications.

Microencapsulation of Lactobacillus acidophilus LA-5 and Bifidobacterium animalis BB-12 in pectin and sodium alginate: A comparative study on viability, stability, and structure

The present study aimed at examining whether the microencapsulation of Lactobacillus acidophilus LA-5 and Bifidobacterium animalis BB-12 inside hydrogels could prolong their survival in freeze-drying conditions, stored at 4℃ and in the gastrointestinal medium. Microencapsulation was performed by emulsion with a syringe, while sodium alginate and high methoxyl pectin were used as a carrier material. A relatively high efficiency of encapsulation was obtained (>92%). Z-Average and pdI in samples were not significant (p < .05). In different treatments, changes in the number of bacteria after freeze-drying, 30 days of storage, and gastrointestinal conditions, compared to each other, were significant (p < .05). However, the survival rate after a reduction during storage was higher than 106 cfu/g, indicating the suitability of the microencapsulation process. The surface of microcapsules observed by a scanning electron microscope (SEM) confirmed the success of encapsulation. Finally, a lower decrease in the count of microencapsulated was observed in comparison to the free cells.