Corn starch systems as carriers for yerba mate (Ilex paraguariensis) antioxidants: Effect of mineral addition

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Effect of high pressure homogenization on the interaction between corn starch and cyanidin-3-O-glucoside

The effects of high pressure homogenization (HPH) at different pressures (50, 100, 150 and 200 MPa) and temperatures (4, 20, 40, 60 and 80 °C) on the interaction between corn starch (CS) and cyanidin-3-O-glucoside (C3G) were investigated. Based on analyses of zeta potential, attenuated total reflection-flourier transformed infrared spectroscopy and binding rate after adding shielding agents, the main interaction force changed from electrostatic interaction to hydrogen bonds. In comparison, the interaction between CS and C3G exhibited greater strength at low temperatures and pressures. Especially, 4 °C/50 MPa HPH caused the most significant enhancement in binding rate and binding amount, from 9.56 % to 25.16 % and 0.96 μg/mg CS to 2.52 μg/mg CS, respectively. At this condition, the specific surface area of CS-C3G increased from 433.57 ± 0.91 m2/kg to 440.93 ± 1.01 m2/kg. Surface fluorescence reduction was observed by confocal laser scanning microscopy, further X-ray diffraction patterns indicated the retention of partial spatial structure. Therefore, HPH opened the entry channels, increased contact area and preserved steric hindrance, which increased hydrogen bonding sites. At high temperatures and high pressures (> 40 °C, > 100 MPa), the increasing free starch chains provided new hydrogen bonding sites. Overall, HPH was an effective method to enhance the interaction by affecting starch structure.

Natural carriers: Recent advances in their use to improve the stability and bioaccessibility of food active compounds

In the last decades, the incorporation of bioactive compounds in food supplements aroused the attention of scientists. However, these ingredients often exhibit both low solubility and stability and their poor bioaccessibility within the gastrointestinal tract limits their effectiveness. To overcome these drawbacks, many carriers have been investigated for encapsulating nutraceuticals and enhancing their bioavailability. It is note that several different vegetable wall materials have been applied to build delivery systems. Considering their encapsulation mechanism, lipid and protein-based carriers display specific interaction patterns with bioactives, whereas polysaccharidic-based carriers can entrap them by creating porous highly stable networks. To maximize the encapsulation efficiency, mixed systems are very promising. Following the current goal of using natural and sustainable ingredients, only a limited number of studies about the isolation of new ingredients from agro-food waste are available. In this review, a comprehensive overview of the state of art in the development of innovative natural lipid-, protein- and polysaccharide-based plant carriers is presented, focusing on their application as food active compounds. Different aspects to be considered in the design of delivery systems are discussed, including the carrier structure and chemical features, the interaction between the encapsulating and the core material, and the parameters affecting bioactives entrapment.

Microencapsulated procyanidins by extruding starch improved physicochemical properties, inhibited the protein and lipid oxidant of chicken sausages

Microencapsulated procyanidins by extruding starch (MPS) were used in meat and meat products as an antioxidant for their simple production process and high stability. This study investigated the controlled released properties of MPS and their effect on antioxidant capacity, physicochemical properties, and sensory qualities of chicken sausages during 4°C storage within 28 days. Antioxidant capacity, particle size analysis, and simulated digestion in vitro demonstrated that microencapsulation by extruding starch delayed the procyanidins release. The reduced crystal structure of MPS was determined by the morphology observation (SEM) and the decrease of the typical diffraction peak at 2θ of 20.9° (XRD). The MPS-added sausage had a higher (p < 0.05) ABTS and DPPH radical scavenging ratio (97.6% and 67.3%) and sulfhydryl contents (114.69 nmol/g protein) than other groups. Moreover, lower (p < 0.05) thiobarbituric acid reactive substances (TBARS) (0.67 mg MDA/kg sausage) and carbonyl values (3.24 nmol/mg protein) were detected in MPS-added sausages than others at the end of storage. The MPS addition increased redness (a* value) and decreased the lightness (L* value). The sensory analysis suggested that the sausage with the increased redness was favorable. These results denominated that MPS was an alternative antioxidant in chicken sausages. Practical Application: In this study, microencapsulated procyanidins were prepared by extrusion technology, and the effect on the quality of chicken sausages was investigated, which provides an alternative natural antioxidant for meat and meat products.

Recent advancements in encapsulation of bioactive compounds as a promising technique for meat preservation

Encapsulation is currently considered as one the most valuable methods for preserving aromatic compounds or hiding odors, enhancing their thermal and oxidative stability, and expanding their food applications. Indeed, this current article was aimed to provide an overview regarding the encapsulation of plant bioactive compounds and the spray-drying and extrusion processes with a focused discussion regarding the encountered challenges for meat and meat product preservation. Furthermore, different ranges of carbohydrates as wall materials (carriers) besides the process conditions' effects on the encapsulation effectiveness and the particle size of the encapsulated bioactive compounds have been discussed. The encapsulation of these compounds ameliorates the quality of the stored meat products by further delaying in microflora growth and lipid/protein oxidation. Therefore, the innovative technologies for plant active compounds encapsulation offer a prospective alternative for natural preservation development in the meat industry.

Modulation of gelatinized wheat starch digestion and fermentation profiles by young apple polyphenols in vitro

To evaluate the effect of young apple polyphenols (YAP) on starch digestion and gut microbiota, complexes of native wheat starch (NWS) with YAP, and their main components chlorogenic acid (CA) and phlorizin (P) were fabricated and gelatinized. Through XRD and FTIR analysis, it was found that the partial crystalline structure of NWS was destroyed during gelatinization, and the addition of P decreased the extent of destruction. Then, the gelatinized starchy samples were subjected to in vitro digestion. The wheat starch (WS)-phenolic compound complexes significantly suppressed the digestion rate and increased the proportion of resistant starch (RS) in WS. Furthermore, the residual starchy components after digestion were fermented by human fecal samples for 24 h. The WS-YAP complex greatly increased the concentration of short-chain fatty acids (SCFAs), especially acetic and propionic acids, and enhanced the growth of health-promoting gut microbiota such as Prevotella. Conclusively, YAP was shown to play a positive role in maintaining blood glucose balance and intestinal health.

Modification methods toward the production of porous starch: a review

Starch is a complex carbohydrate formed by the repeating units of glucose structure connected by the alpha-glycosidic linkages. Starch is classified according to their derivatives such as cereals, legumes, tubers, palms, fruits, and stems. For decades, native starch has been widely utilized in various applications such as a thickener, stabilizer, binder, and coating agent. However, starches need to be modified to enhance their properties and to make them more functional in a wide range of applications. Porous starch is a modified starch product which has attracted interest of late. It consists of abundant pores that are distributed on the granule surface without compromising the integrity of its granular structure. Porous starch can be produced either by enzymatic, chemical, and physical methods or a combination thereof. The type of starch and selection of the modification method highly influence the formation of pore structure. By carefully choosing a suitable starch and modification method, the desired morphology of porous starch can be produced and applied accordingly for its intended application. Innovations and technologies related to starch modification methods have evolved over the years in terms of the structure, properties and modification effects of different starch varieties. Therefore, this article reviews recent modification methods in developing porous starch from various origins.