Effect of ohmic heating parameters on peroxidase inactivation, phenolic compounds degradation and color changes of sugarcane juice

Kiwi (Actinidia deliciosa) juice as a natural inhibitor of the enzymatic activity of sugarcane juice, insights from experimental assessment and molecular docking analysis

The present work evaluated kiwi juice addition alongside pasteurization (at 85 °C for 5 min) or microwave treatment (for 3 min) on the quality improvement of sugarcane juice. The juice was treated in the presence of kiwi juice (0-8%), and its physicochemical properties and microbial load were compared with raw juice. The study also highlighted the key enzymes causing sugarcane juice discoloration, peroxidase (POD) and polyphenol oxidase (PPO), by quantifying kiwi juice constituents using GC-MS and monitoring their effects by molecular docking. Kiwi addition considerably raised (p < 0.05) acidity, ascorbic acid (54.28%), and phenolic compounds (32%), and decreased the POD and PPO activity of raw cane juice. Pasteurization in the presence of kiwi, rather than microwave treatment, has significantly (p < 0.05) increased the phenolic compounds and reduced POD and PPO activities until barley was detected. Molecular docking revealed that heptacosane, oleic acid, and melezitose are the primary kiwi components responsible for enzyme inactivation.

In silico guided pre-treatment of sugarcane juice with natural inhibitors of polyphenol oxidase (PPO) is a new and effective strategy for development of spray-dried formulation

Sugarcane juice is a popular beverage and is also processed to produce sugar. The polyphenol oxidase (PPO) in sugarcane juice causes enzymatic browning and makes the process of sugar production complex and cumbersome. Storage of sugarcane juice is also hampered by the high sugar content and rapid microbial fermentation. The present research assessed the potential of lemon juice (LJ) and ginger extract (GE) as natural inhibitors of PPO. Enzyme kinetics and the mechanism of inhibition of LJ and GE were studied. Primary investigation was carried out using molecular docking approach to assess the inhibitory potential of LJ and GE and to determine the nature of interaction between the enzyme and inhibitors. Extracts were used as inhibitors and studies revealed that both reduced the PPO activity. Subsequently, pure bioactive inhibitors such as ascorbic acid, citric acid, and 6-shogaol present in these natural extracts were used to study the mode of inhibition of PPO. Citric acid decreased PPO activity by lowering pH, while ascorbic acid was found to be a competitive inhibitor of PPO with a Ki of 75.69 µM. The proportion of LJ and GE required in sugarcane juice was optimized on the basis of browning index and sensory acceptance. Further, the sugarcane cane juice after inhibition of PPO under optimized conditions was spray dried and evaluated for reconstitution properties. The product formulated in the present study is a new and effective approach to address quality-compromising issues associated with long-term storage of cane juice.

The Potential of Mangifera indica L. Peel Extract to Be Revalued in Cosmetic Applications

The constant growth of the cosmetic industry, together with the scientific evidence of the beneficial properties of phytochemicals, has generated great interest in the incorporation of bioactive extracts in cosmetic formulations. This study aims to evaluate the bioactive potential of a mango peel extract for its incorporation into cosmetic formulations. For this purpose, several assays were conducted: phytochemical characterization; total phenolic content (TPC) and antioxidant potential; free-radical scavenging capacity; and skin aging-related enzyme inhibition. In addition, the extract was incorporated into a gel formulation, and a preliminary stability study was conducted where the accelerated (temperature ramp, centrifugation, and heating/cooling cycles) and long-term (storage in light and dark for three months) stability of the mango peel formulations were evaluated. The characterization results showed the annotation of 71 compounds, gallotannins being the most representative group. In addition, the mango peel extract was shown to be effective against the •NO radical with an IC50 of 7.5 mg/L and against the hyaluronidase and xanthine oxidase enzymes with IC50 of 27 mg/L and 2 mg/L, respectively. The formulations incorporating the extract were stable during the stability study. The results demonstrate that mango peel extract can be a by-product to be revalorized as a promising cosmetic ingredient.

Impact of Agronomic Treatments on the Enzymatic Browning of Eggplants (Solanum melongena L.)

Enzymatic browning could negatively affect the sensory and nutritional properties of eggplants post-harvest. Polyphenols, polyphenol oxidase (PPO), and reactive oxygen species (ROS) are three material conditions involved in enzymatic browning. This paper seeks to evaluate the effect of fertilization techniques and grafting on the activity of PPO and colorimetric parameters in cultivated eggplants. Fertilization alone significantly increased the PPO activity in all eggplant fleshes (p ≤ 0.05), whereas the grafting technique combined with fertilization decreased the PPO activity in most of the samples significantly (p ≤ 0.05). Moreover, there was a significant positive correlation between the PPO activity and the a* values of the eggplants. The a* values in grafted eggplants were significantly different from each other (p ≤ 0.05), showing that grafting the fertilized eggplants could be effective in controlling the enzymatic browning. The eggplant slices exposed to air for 60 min at room temperature showed a significant increase (p ≤ 0.05) in PPO activity, browning index (BI), total color difference (ΔE), and a*, b*, and c* values. Thus, it is necessary to minimize the exposure time of the slices to air at room temperature, even if combining fertilization techniques with grafting could delay the enzymatic browning in fresh-cut eggplants.

Comparison of energy consumption, color, ascorbic acid and carotenoid degradation in guava (Psidium guajava) pulp during conventional and ohmic heating

This study aimed to compare the effect of ohmic and conventional heat treatments on red guava pulp, evaluating the effects on pulp color, degradation kinetics of ascorbic acid and carotenoids, together with the thermal efficiency of both treatments. Samples were heated by conventional heating (water bath) and ohmic heating (platinum electrodes) using alternating voltage of 21.2 V/m and average frequency of 60 Hz at temperatures of 60, 70 and 80 °C for 110 min. In general, the ascorbic acid degradation followed a first order kinetics, for both heat treatments, the pulp color showed no significant variation (p < 0.05) according to the type and time of heating applied, whereas the carotenoid content was favored by ohmic heating, at the two lowest temperatures tested. As for the heat transfer process, the ohmic treatment showed an average thermal efficiency of 40.93%, while the conventional heating, 2.62%, proving to be a promising emerging technology for processing viscous foods with suspended particles like fruit pulps.

Potential impact of ultrasound, pulsed electric field, high-pressure processing and microfludization against thermal treatments preservation regarding sugarcane juice (Saccharum officinarum)

Sugarcane juice (Saccharum officinarum) is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. It has recently gained consumer interest due to its high nutritional profile and alkaline nature. Still, high polyphenolic and sugar content start the fermentation in juice, resulting in dark coloration. Lately, some novel techniques have been introduced to extend shelf life and improve the nutritional value of sugarcane juice. The introduction of such processing technologies is beneficial over conventional processes and essential for producing chemical-free, high-quality, fresh juices. The synergistic impact of these novel technologies is also advantageous for preserving sugarcane juice. In literature, novel thermal, non-thermal and hurdle technologies have been executed to preserve sugarcane juice. These technologies include high hydrostatic pressure (HHP), ultrasound (US), pulsed electric field (PEF), ultraviolet irradiation (UV), ohmic heating (OH), microwave (MW), microfludization and ozone treatment. This review manifests the impact of novel thermal, non-thermal, and synergistic technologies on sugarcane juice processing and preservation characteristics. Non-thermal techniques have been successfully proved effective and showed better results than novel thermal treatments. Because they reduced microbial load and retained nutritional content, while thermal treatments degraded nutrients and flavor of sugarcane juice. Among non-thermal treatments, HHP is the most efficient technique for the preservation of sugarcane juice while OH is preferable in thermal techniques due to less nutritional loss.

How to comprehensively improve juice quality: a review of the impacts of sterilization technology on the overall quality of fruit and vegetable juices in 2010-2021, an updated overview and current issues

Fruit and vegetable juices (FVJ) are rich in nutrients, so they easily breed bacteria, which cause microbial pollution and rapid deterioration of their quality and safety. Sterilization is an important operation in FVJ processing. However, regardless of whether thermal sterilization or non-thermal sterilization is used, the effect and its impact on the overall quality of FVJ are strongly dependent on the processing parameters, microbial species, and FVJ matrix. Therefore, for different types of FVJ, an understanding of the impacts that different sterilization technologies have on the overall quality of the juice is important in designing and optimizing technical parameters to produce value-added products. This article provides an overview of the application of thermal and non-thermal technique in the field of FVJ processing over the past 10 years. The operating principle and effects of various technologies on the inactivation of microorganisms and enzymes, nutritional and functional characteristics, physicochemical properties, and sensory quality of a wide range of FVJ are comprehensively discussed. The application of different combinations of hurdle technology in the field of FVJ sterilization processing are also discussed in detail. Additionally, the advantages, limitations, and current application prospects of different sterilization technologies are summarized.

Ohmic Heating Extraction at Different Times, Temperatures, Voltages, and Frequencies: A New Energy-Saving Technique for Pineapple Core Valorization

Pineapple core is considered a processing by-product. This study proposed and evaluated an ohmic heating extraction-based valorization platform to obtain value-added bioactive compounds from pineapple core and studied the effects of four important processing parameters. In this sense, a Taguchi design (L16(4)4) was used to assess the effects of temperature (70, 80, 90, and 100 °C), time (15, 30, 45, and 60 min), voltage (110, 160, 210, and 260 V), and frequency (60, 340, 620, and 900 Hz) on heating rate, come-up time, energy consumption, system performance efficiency, total phenolic compounds (TPC), DPPH, and ABTS. Finally, a side-by-side comparison of optimized ohmic heating (OOH) and conventional extraction was performed, and chemical composition was compared by ultra-performance liquid chromatography equipped with photodiode array detection-mass (UPLC-DAD-ESI-MS-MS). According to the results, increasing temperatures enhanced system performance efficiency but negatively affected TPC and antioxidant values above 90 ℃. Similarly, prolonging the extraction (>30 min) decreased TPC. Further, increasing voltage (from 110 to 260 V) shortened the come-up time (from 35.75 to 5.16 min) and increased the heating rate (from 2.71 to 18.80 °C/min−1). The optimal conditions were 30 min of extraction at 80 °C, 160 V, and 900 Hz. Verification of the optimal conditions revealed that OOH yielded an extract with valuable bioactive compounds and saved 50% of the time and 80% of energy compared to the conventional treatment. The UPLC-DAD-ESI-MS-MS showed that there were similarities between the chemical profiles of the extracts obtained by conventional and OOH methods, while the concentration of major compounds varied depending on the extraction method. This information can help achieve sustainable development goals (SDGs) by maximizing the yield and minimizing energy and time consumption.

Ohmic heating application in food processing: recent achievements and perspectives

Food processing is an important operation in the food industry that converts fresh foods into final products with desirable characteristics for consumption and storage. Ohmic heating is an emerging technique for food processing that seems to be a suitable alternative to conventional heat treatment. Recently, there has been a lot of research into ohmic heating applications in processing various foods. This review highlights the findings of studies conducted in 2018–2022 on the impact of ohmic heating on the physical, chemical, and sensory properties of foodstuffs during processing. We found that this technology provides more reliable process control compared to the traditional technique, namely conventional heating. Although ohmic heating has a positive effect on the quality of foods, its efficiency is limited by certain food components, including acid and fat, that markedly affect the electrochemical attributes of foods. Therefore, to achieve optimal results, ohmic heating conditions should be set in accordance with the properties of food materials. There is a need for further in-depth studies on the performance of ohmic heating in food processing on a large, rather than a lab scale.

Coloration mechanisms of fresh sugarcane juice: Investigating the critical components and enzyme activity

The color of sugarcane juice has a great influence on the preferences of consumers. The contents of pigments, sugars, free amino acids, organic acids, phenolic compounds, enzyme activities, antioxidant activities, and color differences among juices produced from four sugarcane varieties were investigated in this study. The data suggested that variety played an important role in the color and chemicophysical properties of sugarcane juice. The color of four varieties of sugarcane juice varied from greenish yellow to light brown. Bamboo cane juice and black rind sugarcane juice presented similar color properties and both had high contents of phenolic compounds and strong antioxidant activities. Yellow rind sugarcane juice with higher value of L* (26.10) and more pigment contents than the other varieties was attractive. Sucrose, glucose, β-alanine, chlorogenic acid, p-hydroxybenzoic acid, isochlorogenic acid, DPPH, and polyphenol oxidase activity had positive correlations with a* value. The effects of organic acids on color were limited. PRACTICAL APPLICATION: This study demonstrated the relationships between color parameters and contents of pigments, sugars, free amino acids, organic acids, phenolics, enzyme activities, and antioxidant activities of sugarcane juice. This could help to find out the coloration mechanisms of sugarcane juice. Our manuscript created a paradigm for future studies on color control during juice processing and storage.

Anthocyanin Recovery from Grape by-Products by Combining Ohmic Heating with Food-Grade Solvents: Phenolic Composition, Antioxidant, and Antimicrobial Properties

Usually, wine-making by-products are discarded, presenting a significant environmental impact. However, they can be used as a source of bioactive compounds. Moreover, consumers' increasing demand for naturally nutritious and healthy products requires new formulations and food product improvement, together with sustainable, environmentally friendly extraction methods. Thus, this work aimed to compare ohmic heating (OH) with conventional methodology (CONV), using food-grade solvents, mainly water, compared to standard methanol extraction of anthocyanins. No significant differences were found between the CONV and OH for total phenolic compounds, which were 2.84 ± 0.037 and 3.28 ± 0.46 mg/g DW gallic acid equivalent, respectively. The same tendency was found for antioxidant capacity, where CONV and OH presented values of 2.02 ± 0.007 g/100 g and 2.34 ± 0.066 g/100 g ascorbic acid equivalent, respectively. The major anthocyanins identified were malvidin-3-O-acetylglucoside, delphinidin-3-O-glucoside, petunidine-3-O-glucoside, cyanidin-3-O-glucoside, and peonidine-3-O-glucoside. These extracts displayed antimicrobial potential against microorganisms such as Yersinia enterocolitica, Pseudomonas aeruginosa, Salmonella enteritidis, methicillin-sensitive Staphylococcus aureus, a methicillin-resistant Staph. aureus (MRSA), and Bacillus cereus. In conclusion, OH provides similar recovery yields with reduced treatment times, less energy consumption, and no need for organic solvents (green extraction routes). Thus, OH combined with water and citric acid allows a safe anthocyanin extraction from grape by-products, thus avoiding the use of toxic solvents such as methanol, and with high biological potential, including antimicrobial and antioxidant activity.

Phenolic profile of sugarcane juice: Effects of harvest season and processing by ohmic heating and ultrasound

In the present work, a comprehensive phenolic analysis of fresh sugarcane juice from three different harvest seasons was performed and the effect of ohmic heating and ultrasound treatments on the phenolic content and color of the juice was evaluated. Among the 32 phenolic compounds identified, a total of 17 were quantified, comprising, in decreasing order of abundance, flavones (38-49 mg/L), dilignols (22-29 mg/L), and phenolic acid derivatives (17-30 mg/L). The main phenolic groups affected by the crop season (year and season) were flavones and phenolic acid derivatives. Juice treated by ohmic heating and ultrasound showed a total phenolic content similar to fresh juice, indicating the absence of additional non-thermal effects. Regarding color, both treatments promoted only a slight difference by visual perception. Considering these two quality parameters, ultrasound and ohmic heating seem to be a good alternative for sugarcane juice pasteurization.

Effect of pasteurization on Aspergillus fumigatus in apple juice: Analysis of the thermal and electric effects

Fungal spoilage in fruit juices is a currently relevant issue considering that recent reports have found unacceptable fungal levels even after traditional pasteurization processes. Ohmic heating demonstrated to be a good alternative process to conventional pasteurization, as it can promote higher heating rates and additional cell damage in some scenarios (nonthermal effects). However, the application of ohmic processing for fungi inactivation has not been properly investigated. The objective of this study was to analyze the inactivation of Aspergillus fumigatus, a highly distributed fungi species, in apple juice by ohmic and conventional heating at 75, 80, 85, 90 and 94 °C. Predictive primary and secondary models were fitted and the Weibull-Mafart models were the most accurate to describe the experimental behavior considering the statistical indices applied. Statistical differences between both thermal processes were found in the three lower analyzed temperatures (75, 80 and 85 °C), which is possibly related to nonthermal effects. When ohmic heating was applied, processing time was up to 23% shorter. The resulted model was successfully validated in two distinct temperatures (83 and 92 °C) and could be applied to obtain adequate processing times for apple juice pasteurization. This study contributes to deepen the knowledge concerning the use of ohmic heating for fungi inactivation.

Degradations of aroma characteristics and changes of aroma related compounds, PPO activity, and antioxidant capacity in sugarcane juice during thermal process

Alterations of aroma properties and aroma-related attributes of sugarcane juice during thermal processing under different temperatures (90, 100, and 110 ℃) and treating time (10 s, 20 s, and 30 s) were assessed in this study. Changes in the volatility of aroma compounds were extremely complicated and respected to thermal processing conditions. Fructose, serine, and glutanic acid of sugarcane juice were increased at first and decreased at the end of treatment at high temperature. Phenolic compounds and PPO activity presented the decrease trends throughout the thermal treatment. The thermal processing of sugarcane juice could be roughly divided into three stages based on the cluster analysis of all the data in this study. Sugars, amino acids, and phenolic compounds might be important potential precursors of aroma deteriorating reactions. The comprehensive analysis of aroma relevant compounds and enzyme activities was beneficial for the investigation of degradation mechanism of aroma for sugarcane juice, and providing a theoretical basis for optimization of juice processing. PRACTICAL APPLICATION: This study demonstrated the changing process of aroma quality and associated compounds in sugarcane juice during thermal processing. This could help to find out the reasons of aroma degradations in sugarcane juice and other thermal sensitive juice. Our manuscript created a paradigm for future studies on the aroma quality control and parameter optimization during the processing of fruit and vegetable juice.