Fabrication of functional biomass carbon aerogels derived from sisal fibers for application in selenium extraction

Achieving ultrafast and highly selective capture of radiotoxic tellurite ions on iron-based metal-organic frameworks through coordination bond-dominated conversion

Chemically durable and effective adsorbents for radiotoxic TeOx2- (TeIV and TeVI) anions remain in great demand for contamination remediation. Herein, a low-cost iron-based metal-organic framework (MIL-101(Fe)) was used as an adsorbent to capture TeOx2- anions from contaminated solution with ultrafast kinetics and record-high adsorption capacity of 645 mg g-1 for TeO32- and 337 mg g-1 for TeO42-, outperforming previously reported adsorbents. Extended X-ray absorption fine structure (EXAFS) and density functional theory (DFT) calculations confirmed that the capture of TeOx2- by MIL-101(Fe) was mediated by the unique C-O-Te and Fe-O-Te coordination bonds at corresponding optimal adsorption sites, which enabled the selective adsorption of TeOx2- from solution and further irreversible immobilization under the geological environment. Meanwhile, MIL-101(Fe) works steadily over a wide pH range of 4-10 and at high concentrations of competing ions, and it is stable under β-irradiation even at high dose of 200 kGy. Moreover, the MIL-101(Fe) membrane was fabricated to efficiently remove TeO32- ions from seawater for practical use, overcoming the secondary contamination and recovery problems in powder adsorption. Finally, the good sustainability of MIL-101(Fe) was evaluated from three perspectives of technology, environment, and society. Our strategy provides an alternative to traditional removal methods that should be attractive for Te contamination remediation.

Multifaceted potential applicability of hydrotalcite-type anionic clays from green chemistry to environmental sustainability

Hydrotalcite-like anionic clays (HTs) also known as Layered double hydroxides (LDHs) have been developed as multifunctional materials in numerous applications related to catalysis, adsorption, and ion-exchange processes. These materials constitute an important class of ionic lamellar solid clays of Brucite-like structure which comprise of consecutive layers of divalent and trivalent metal cations with charge balancing anions and water molecules in interlayer space. These materials have received increasing attention in research due to their interesting properties namely layered structure, ease of preparation, flexible tunability, ability to intercalate different types of anions, electronic properties, high thermal stability, high biocompatibility, and easy biodegradation. Moreover, HTs/LDHs have unique tailorable and tuneable characteristics such as both acidic and basic sites, anion exchange capability, surface area, basal spacing, memory effect, and also exhibit high exchange capacities, which makes them versatile materials for a wide range of applications and extended their horizons to diverse areas of science and technology. This study enlightens the various rational researches related to the synthetic methods and features focusing on synthesis and/or fabrication with other hybrids and their applications. The diverse applications (namely catalyst, adsorbent to toxic chemicals, agrochemicals management, non-toxic flame retardants, and recycling of plastics) of these multifunctional materials related to a clean and sustainable environment were also summarized.

Modification of ultrafiltration membrane with antibacterial agent intercalated layered nanosheets: Toward superior antibiofouling performance for water treatment

Membrane fouling, especially biofouling induced by biofilm formation on membranes, can result in frequent cleaning or even replacement of membranes. Fabrication of membrane with excellent antibiofouling property is quite attractive due to its effectiveness and low-impact on the operation of membrane-based process. Herein, a cationic antibacterial agent, quaternary ammonium compound (QAC), was intercalated into the interlayer spaces of the MgAl layered double hydroxide (QAC/LDH) by self-assembly. The QAC/LDH composite was incorporated into polyethersulfone (PES) ultrafiltration (UF) membrane (PES-QLDH). The QAC/LDH enhanced the hydrophilicity, water flux, and resistance to organic fouling for the PES-QLDH membrane. The PES-QLDH membrane exhibited superior antibiofouling performance than the control PES membrane, with deposition of a thinner biofilm layer consisted of almost dead cells. The superior antibacterial activity inhibits the adhesion and growth of bacteria on the membrane surface, effectively retarding the formation of biofilms. Importantly, the synergistic effect of QAC and LDH in the PES-QLDH membrane resulted in a high biocidal activity based on both direct and indirect killing mechanisms. The PES-QLDH membrane maintained a stable and high antibacterial activity after several fouling-cleaning cycles. These results imply that the PES-QLDH membrane provides an effective and promising strategy for its long-term application in wastewater treatment.

Fluorine-Free Superhydrophobic Covalent-Organic-Polymer Nanosheet Coating for Selective Dye and Emulsion Separation

Covalent organic polymer nanosheets (COPNs) endowed with porous networks and large surface areas in their structures offer great advantages over other materials in addressing environmental problems. In this study, fluorine-free superhydrophobic COPNs were designed and applied to selective dye absorption. Notably, COPNs selectively adsorb dyes with a high hydrophobic index (HI) and reject low HI dyes with maximum adsorption capacities of 361 and 263 mg/g for crystal violet and methylene blue, respectively. The adsorption isotherm model showed that the COPNs follow the Langmuir adsorption isotherm model and pseudo-second-order kinetics. Next, we explored the superhydrophobicity of the COPNs by in situ fabrication with melamine sponge (COPNs-MS), which incorporates the superhydrophobicity of COPNs [water contact angle (WCA) of >150°] with the structure and flexibility of the MS skeleton. The COPNs-MS shows various oil-adsorbing properties with good adsorption capacity (from 60 to 120 g/g) and also effectively separates various surfactant-stabilized emulsions with a separation efficiency of over 99%. The as-fabricated COPNs-MS retains its superhydrophobicity in various solvents and hazardous conditions (WCA ≥ 150°) and exhibits good flame retardancy and excellent compression properties with excellent antifouling property due to the superhydrophobic COPN coating. Furthermore, COPNs-MS also demonstrates excellent recyclability because the strong COPN coating in the MS skeleton retains its hydrophobicity. Therefore, our fluorine-free superhydrophobic COPNs are not only capable of selective dye adsorption but also exhibit very good oil adsorption and surfactant-stabilized emulsion separation performance.

Efficient removal of As(Ш) via the synergistic effect of oxidation and absorption by FeOOH@MnO2@CAM nano-hybrid adsorption membrane

Due to the neutral charge of As(III) oxy-ions that make approaching the traditional adsorbent very improbable compared to the As(V) case, making it harder to be separated. To enhance the adsorption of As(Ш), the FeOOH coated cellulose acetate (CA) membrane doped with MnO₂ nanoparticles (FeOOH@MnO₂@CAM) was fabricated and then to removes As(Ш) in water through the synergistic effect of oxidation and adsorption, and the maximum adsorption capacity can reach 50.34 mg/g. FeOOH@MnO₂@CAM was fabricated with CA as a substrate by dipping-precipitation phase inversion and hydrothermal method. Langmuir and pseudo-second-order model showed that As(Ш) was adsorbed by chemical interactions through the monolayer and thermodynamic showed that As(Ш) adsorption was an exothermic and spontaneous process. The results of the pH study showed that as the pH increases from 3 to 11, the adsorption capacity of As(Ш) decreases from 50.34 to 14.32 mg/g, which was attributed to the acidic environment promoting the protonation of the surface of FeOOH@MnO₂@CAM, which increases the electrostatic attraction, and the alkaline environment increases electrostatic repulsion due to deprotonation. The competitive ions exhibited the PO₄^3- significantly reduce the adsorption capacity of As(Ш)，and as the PO₄^3- content increases, the adsorption capacity of As(Ш) decreases from 29.76 to 18.57 mg/g, which was attributed to the similar chemical properties of PO₄^3- and arsenate. Importantly, FeOOH@MnO₂@CAM still maintains an adsorption capacity of 20.19 mg/g after seven cycles, demonstrating that it is a kind of environmentally friendly material to remove As(Ш) in the water environment.

Enhanced As(Ш) removal from aqueous solutions by recyclable Cu@MNM composite membranes via synergistic oxidation and absorption

Arsenic contamination threatens the safety of drinking water in many parts of the world, especially As (Ш), which is more toxic and more difficult to remove than As (Ⅴ). Hence, in terms of environmental protection and sustainable development, it is very important to remove As (Ш) from the environment to reduce the damage to ecosystems and human health. Since there is no effective method for removing As (Ш), it is essential to oxidize As (Ш) into easily removable As (Ⅴ) to achieve effective separation. Herein, a novel copper-coated MnO₂ nanowires membrane (Cu@MNM) which combines the oxidation properties of MnO₂ and the catalytic and absorption properties of nanoscale Cu (NSCu), was developed based on in situ chemical deposition NSCu on the surface of ultralong MnO₂ nanowires. The as-prepared Cu@MNM shows excellent arsenic separation properties with the maximum rejection rate of 96%. The results of pH studies indicate that acidic conditions promote the separation of As (Ш) by Cu@MNM, while alkaline conditions are inhibitory due to deprotonation of Cu@MNM surface enhances electrostatic repulsion. The results of the interfering ions show that the phosphate ions have a strong inhibitory effect on arsenic separation. In addition, Cu@MNM has been shown to be remarkably recyclable and can still achieve a separation efficiency of 60% after five cycles. Therefore, the prepared Cu@MNM with the high arsenic retention efficiency and excellent recycling capabilities has the potential to become an excellent candidate for practical application in arsenic separation.

In-syringe extraction using compressible and self-recoverable, amphiphilic graphene aerogel as sorbent for determination of phenols

Graphene aerogels (GAs) have demonstrated great promise as sorbent materials. However, the intrinsically hydrophobic GAs are unsuitable for extraction of highly water-soluble analytes. Moreover, lack of compressibility limits the recyclability of GAs. In this work, an interesting type of water-induced self-recoverable amphiphilic GA was synthesized and employed as sorbent to extract nine priority phenols, listed as priority pollutants by the United States Environmental Protection Agency, from aqueous samples. The water-induced self-recoverability gives the GA the characteristic of a sponge, providing high recyclability and long-life. The aerogel was placed in a 2-mL microsyringe for in-syringe extraction of the phenols. The GA exhibits amphiphilicity due to the cross-linking by polyvinyl alcohol. At the same time, it exhibited selectivity to the water-soluble phenols. The extracted phenols were eluted with acetonitrile from the GA and the final extract was analyzed by high-performance liquid chromatography with ultraviolet detection (HPLC-UV). The results showed that this method provided low limits of detection for the phenols (0.089-0.015 µg/L), good linearity (r² ≥ 0.9956) and low relative standard deviations (≤6.8%). The optimized method was applied successfully to river water samples. The simple in-syringe extraction procedure in combination with HPLC-UV analysis was demonstrated to be efficient, fast and convenient.