Removal of UHT dairy fouling — An efficient cleaning process by optimizing the rate controlling alkaline cleaning step

Monitoring and Characterization of Milk Fouling on Stainless Steel Using a High-Pressure High-Temperature Quartz Crystal Microbalance with Dissipation

Fouling at interfaces deteriorates the efficiency and hygiene of processes within numerous industrial sectors, including the oil and gas, biomedical device, and food industries. In the food industry, the fouling of a complex food matrix to a heated stainless steel surface reduces production efficiency by increasing heating resistance, pumping requirements, and the frequency of cleaning operations. In this work, quartz crystal microbalance with dissipation (QCM-D) was used to study the interface formed by the fouling of milk on a stainless steel surface at different flow rates and protein concentrations at high temperatures (135 °C). Subsequently, the QCM-D response was recorded during the cleaning of the foulant. Two phases of fouling were identified. During phase-1, the fouling rate was dependent on the flow rate, while the fouling rate during phase-2 was dependent on the flow rate and protein concentration. During cleaning, foulants deposited at the higher flow rate swelled more than those deposited at the lower flow rate. The composition of the fouling deposits consisted of both protein and mineral species. Two crystalline phases of calcium phosphate, β-tricalcium phosphate and hydroxyapatite, were identified at both flow rates. Stratification in topography was observed across the surface of the QCM-D sensor with a brittle and cracked structure for deposits formed at 0.2 mL/min and a smooth and close-packed structure for deposits formed at 0.1 mL/min. These stratifications in the composition and topography were correlated to differences in the reaction time and flow dynamics at different flow rates. This high-temperature application of QCM-D to complex food systems illuminates the initial interaction between proteins and minerals and a stainless steel surface, which might otherwise be undetectable in low-temperature applications of QCM-D or at larger bench and industrial scales. The methods and results presented here have implications for optimizing processing scenarios that limit fouling formation while also enhancing removal during cleaning.

Innovative fouling-resistant materials for industrial heat exchangers: a review

Fouling of heat exchangers (HEs) has become a major concern across the industrial sector. Fouling is an omnipresent phenomenon but is particularly prevalent in the dairy, oil, and energy industries. Reduced energy performance that results from fouling represents significant operating loss in terms of both maintenance and impact on product quality and safety. In most industries, cleaning or replacing HEs are currently the only viable solutions for controlling fouling. This review examines the latest advances in the development of innovative materials and coatings for HEs that could mitigate the need for costly and frequent cleaning and potentially extend their operational life. To better understand the correlation between surface properties and fouling occurrence, we begin by providing an overview of the main mechanisms underlying fouling. We then present selected key strategies, which can differ considerably, for developing antifouling surfaces and conclude by discussing the current trends in the search for ideal materials for a range of applications. In our presentation of all these aspects, emphasis is given wherever possible to the potential transfer of these innovative surfaces from the laboratory to the three industries most concerned by HE fouling problems: food, petrochemicals, and energy production.