Detection methods for sub-nanogram level of emerging pollutants - Per and polyfluoroalkyl substances

Structural Features of Styrene-Functionalized Cyclodextrin Polymers That Promote the Adsorption of Perfluoroalkyl Acids in Water

Cross-linked β-cyclodextrin (β-CD) polymers are promising adsorbents for the removal of per- and polyfluoroalkyl substances (PFAS) from contaminated water sources, including contaminated groundwater, drinking water, and wastewater. We previously reported porous, styrene-functionalized β-cyclodextrin (StyDex) polymers derived from radical polymerization with vinyl comonomers. Because of the versatility of these polymerizations, StyDex polymer compositions are tunable, which facilitates efforts to establish structure-adsorption relationships and to discover improved materials. Here, we evaluate the material properties and PFAS adsorption of 20 StyDex derivatives with varied comonomer structure and loading, regiochemistry of styrene placement on the CD monomer, and CD size. A StyDex polymer containing N,N'-dimethylbutyl ammonium ions exhibited the most effective PFAS adsorption in batch experiments. Furthermore, a StyDex polymer containing β-CD exhibited size-selective host-guest interactions with perfluoroalkyl acids (PFAAs) and neutral contaminants in aqueous electrolyte when compared to similar polymers containing either α-CD or γ-CD. Polymers based on β-CD monomers with an average of seven styrene groups randomly positioned over the 21 available hydroxyl groups performed similarly to those based on a β-CD monomer functionalized regiospecifically at each of the seven 6' positions. The former β-CD monomer is prepared in a single step from unmodified β-CD, so the ability to use it without compromising performance demonstrates promise for developing economically competitive adsorbents. These results offered important insights into structure-adsorption properties of StyDex polymers and will inform the design of improved StyDex formulations.

Occurrence, fate, and remediation for per-and polyfluoroalkyl substances (PFAS) in sewage sludge: A comprehensive review

Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.

Recent advances in the application of magnetic materials for the management of perfluoroalkyl substances in aqueous phases

Perfluoroalkyl substances (PFASs) are a class of artificially synthesised organic compounds extensively used in both industrial and consumer products owing to their unique characteristics. However, their persistence in the environment and potential risk to health have raised serious global concerns. Therefore, developing effective techniques to identify, eliminate, and degrade these pollutants in water are crucial. Owing to their high surface area, magnetic responsiveness, redox sensitivity, and ease of separation, magnetic materials have been considered for the treatment of PFASs from water in recent years. This review provides a comprehensive overview of the recent use of magnetic materials for the detection, removal, and degradation of PFASs in aqueous solutions. First, the use of magnetic materials for sensitive and precise detection of PFASs is addressed. Second, the adsorption of PFASs using magnetic materials is discussed. Several magnetic materials, including iron oxides, ferrites, and magnetic carbon composites, have been explored as efficient adsorbents for PFASs removal from water. Surface modification, functionalization, and composite fabrication have been employed to improve the adsorption effectiveness and selectivity of magnetic materials for PFASs. The final section of this review focuses on the advanced oxidation for PFASs using magnetic materials. This review suggests that magnetic materials have demonstrated considerable potential for use in various environmental remediation applications, as well as in the treatment of PFASs-contaminated water.

Effect of prenatal exposure to phthalates on birth weight of offspring: A meta-analysis

Prenatal exposure to phthalates is common. However, its effect on birth weight has always been met with conflicting conclusions. To explore the effects of prenatal phthalate exposure on neonatal weight, we searched PubMed, Web of Science (WOS), Cochrane Library, and Embase databases for articles published up to October 24, 2023. Observational studies with 95% confidence intervals (CI) were included. Our findings indicate no significant association between either mixed exposure effects or single phthalate metabolites and offspring birth weight when monitoring maternal urine phthalate metabolites. When stratified by sex, ΣHMWPs and MMP significantly reduced the birth weight of female offspring (ΣHMWPs: Pooled β = -62.08, 95%CI: -123.11 to -1.05, P = 0.046; MMP: Pooled β = -10.77, 95%CI: -18.74 to -2.80, P = 0.008). The results of subgroup analysis showed that ΣPAEs and ΣDEHP significantly decreased birth weight in the specific gravity correction group (ΣPAEs: Pooled estimates = -29.31, 95%CI: -58.52 to -0.10, P = 0.049; ΣDEHP: Pooled estimates = -18.25, 95%CI: -33.03 to -3.47, P = 0.016), and MECPP showed a positive correlation in the creatinine correction group (MECPP: Pooled estimates = 18.45, 95%CI: 0.13 to 36.77, P = 0.048). MEP and MBzP were negatively associated with birth weight in the no adjustment for gestational age group (MEP: Pooled estimates = -7.70, 95%CI: -14.19 to -1.21, P = 0.020; MBzP: Pooled estimates = -9.55, 95%CI: -16.08 to -3.03, P = 0.004). To make the results more convincing, more high-quality studies with large samples are urgently required.

A Non-Bonding Interaction-Based Fluorescent Probe for Detection of Halogenated Carbonyl Compounds

The fluorescent detection of neutral and volatile carbonyl halogenated compounds had not been studied before. We describe here a simple and sensitive turn-on rhodamin fluorescent probe for the selective detection of fluorinated/brominated/chlorinated/iodinated carbonyl compounds. A wide range of linear or cyclic volatile organic halides was detected with a limit of detection as low as 45.6 nM within 1 min. Mechanistic experiments and DFT calculations indicate the reversible formation of a 1:1 complex of sensor and analyst through non-bonding interaction.

An Overview on Recent Advances in Biomimetic Sensors for the Detection of Perfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFAS) are a class of materials that have been widely used in the industrial production of a wide range of products. After decades of bioaccumulation in the environment, research has demonstrated that these compounds are toxic and potentially carcinogenic. Therefore, it is essential to map the extent of the problem to be able to remediate it properly in the next few decades. Current state-of-the-art detection platforms, however, are lab based and therefore too expensive and time-consuming for routine screening. Traditional biosensor tests based on, e.g., lateral flow assays may struggle with the low regulatory levels of PFAS (ng/mL), the complexity of environmental matrices and the presence of coexisting chemicals. Therefore, a lot of research effort has been directed towards the development of biomimetic receptors and their implementation into handheld, low-cost sensors. Numerous research groups have developed PFAS sensors based on molecularly imprinted polymers (MIPs), metal-organic frameworks (MOFs) or aptamers. In order to transform these research efforts into tangible devices and implement them into environmental applications, it is necessary to provide an overview of these research efforts. This review aims to provide this overview and critically compare several technologies to each other to provide a recommendation for the direction of future research efforts focused on the development of the next generation of biomimetic PFAS sensors.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.