Effect of pH on Thermoanaerobacterium thermosaccharolyticum DSM 571 growth, spore heat resistance and recovery

New Thoughts on an Old Topic: Secrets of Bacterial Spore Resistance Slowly Being Revealed

The quest for bacterial survival is exemplified by spores formed by some Firmicutes members. They turn up everywhere one looks, and their ubiquity reflects adaptations to the stresses bacteria face. Spores are impactful in public health, food safety, and biowarfare. Heat resistance is the hallmark of spores and is countered principally by a mineralized gel-like protoplast, termed the spore core, with reduced water which minimizes macromolecular movement/denaturation/aggregation. Dry heat, however, introduces mutations into spore DNA. Spores have countermeasures to extreme conditions that are multifactorial, but the fact that spore DNA is in a crystalline-like nucleoid in the spore core, likely due to DNA saturation with small acid-soluble spore proteins (SASPs), suggests that reduced macromolecular motion is also critical in spore dry heat resistance. SASPs are also central in the radiation resistance characteristic of spores, where the contributions of four spore features-SASP; Ca2+, with pyridine-2,6-dicarboxylic acid (CaDPA); photoproduct lyase; and low water content-minimize DNA damage. Notably, the spore environment steers UV photochemistry toward a product that germinated spores can repair without significant mutagenesis. This resistance extends to chemicals and macromolecules that could damage spores. Macromolecules are excluded by the spore coat which impedes the passage of moieties of ≥10 kDa. Additionally, damaging chemicals may be degraded or neutralized by coat enzymes/proteins. However, the principal protective mechanism here is the inner membrane, a compressed structure lacking lipid fluidity and presenting a barrier to the diffusion of chemicals into the spore core; SASP saturation of DNA also protects against genotoxic chemicals. Spores are also resistant to other stresses, including high pressure and abrasion. Regardless, overarching mechanisms associated with resistance seem to revolve around reduced molecular motion, a fine balance between rigidity and flexibility, and perhaps efficient repair.

The effect of pH on the growth rate of Bacillus cereus sensu lato: Quantifying strain variability and modelling the combined effects of temperature and pH

In this study, the effect of pH, alone or in combination with temperature, on the maximum growth rate (μ_max) of B. cereus sensu lato was investigated. In phase 1, the effect of pH at 30 °C was studied for 16 mesophilic strains and 2 psychrotrophic strains of Bacillus cereus sensu lato. The μ_max vs. pH relationship was found to show a similar pattern for all the strains. Several pH models from literature were evaluated and the best performing 'growth rate vs. pH' model selected. A stochastic model was then developed to predict the maximum specific growth rate of mesophilic B. cereus at 30 °C as a function of pH, the intra-species variability being incorporated via considering the model parameters (e.g. pH_min) randomly distributed. The predicted maximum specific growth rates were acceptably close to independent published data. In phase 2, the combined effects of temperature and pH were studied. Growth rates were also generated at 15, 20 and 40 °C for a selection of strains and the pH model was fitted at each temperature. Interestingly, the results showed that the estimates for the pH_min parameter for mesophilic strains were lower at 20-30 °C than near the optimum temperature (40 °C), suggesting that experiments for the determination of this parameter should be conducted at lower-than-optimum temperatures. New equations were proposed for the relationship between temperature and the minimum pH-values, which were also consistent with the experimental growth boundaries. The parameters defining this equation quantify the minimum temperature for growth observed experimentally, the temperature of maximum enzyme stability and the maximum temperature for growth. Deviations from the Gamma hypothesis (multiplicative effects of environmental factors on the maximum specific growth rate) were observed near the growth limits, especially at 40 °C. To improve model performance, two approaches, one based on a minimum pH-term (doi: https://doi.org/10.3389/fmicb.2019.01510) and one based on an interaction term (doi: http://dx.doi.org/10.1016/S0168-1605(01)00640-7) were evaluated.

Improvements in xylose stability and thermalstability of GH39 β-xylosidase from Dictyoglomus thermophilum by site-directed mutagenesis and insights into its xylose tolerance mechanism

β-Xylosidases are often inhibited by its reaction product xylose or inactivated by high temperature environment, which limited its application in hemicellulosic biomass conversion to fuel and food processing. Remarkably, some β-xylosidases from GH39 family are tolerant to xylose. Therefore, it is of great significance to elucidate the effect mechanism of xylose on GH39 β-xylosidases to improve their application. In this paper, based on the homologous model and prediction of protein active pocket constructed by I-TASSA and PyMOL, two putative xylose tolerance relevant sites (283 and 284) were mutated at the bottom of the protein active pocket, where xylose sensitivity and thermostability of Dictyoglomus thermophilum β-xylosidase Xln-DT were improved by site-directed mutagenesis. The Xln-DT mutant Xln-DT-284ASP and Xln-DT-284ALA showed high xylose tolerance, with the K_i values of 4602 mM and 3708 mM, respectively, which increased by 9-35% compared with the wildtype Xln-DT. The thermostability of mutant Xln-DT-284ASP was significantly improved at 75 and 85 °C, while the activity of the wild enzyme Xln-DT decreased to 40-20%, the activity of the mutant enzyme still remained 100%. The mutant Xln-DT-284ALA showed excellent stability at pH 4.0-7.0, but Xln-DT-284ASP showed slightly decreased activity. Furthermore, in order to explore the key sites and mechanism of xylose's effect on β-xylosidase activity, the interaction between xylose and enzyme was simulated by molecular docking. Besides binding to the active sites at the bottom of the substrate channel, xylose can also bind to sites in the middle or entrance of the channel with different affinities, which may determine the xylose inhibition of β-xylosidase. In conclusion, the improved xylose tolerance of mutant enzyme could be more advantageous in the degradation of hemicellulose and the biotransformation of other natural active substances containing xylose. This study supplies new insights into general mechanism of xylose effect on the activity of GH 39 β-xylosidases as well as related enzymes that modulate their activity via feedback control mechanism.

Effect of temperature and soluble solid on Bacillus subtilis and Bacillus licheniformis spore inactivation and quality degradation of pineapple juice

Bacillus subtilis and Bacillus licheniformis spores can survive processing temperatures used in the thermal processes of high-acid foods. Therefore, this study investigated the thermal inactivation of B. subtilis and B. licheniformis spores in pineapple juice at different temperatures (85-100°C) and soluble solids (SS, 11-30°Brix). The quality of juices and microbial loads after the thermal treatments during storage at 4 °C for 35 days was then checked. A linear decrease in D-value was observed with increasing temperature of treatment. Furthermore, the D-values determined in pineapple juice were: D_90°C=13.2 ± 0.5 mins, D_95°C = 6.8 ± 0.9 mins and D_100°C = 2.1 ± 1.7 mins for B. subtilis spores, and D_85°C = 16.6 ± 0.4 mins, D_90°C = 7.6 ± 0.5 mins and D_95°C = 3.6 ± 1.5 min, for B. licheniformis. Generally, the susceptibility of the bacteria to soluble solid change was affected by the interaction between temperature, SS and strain. In addition, pasteurization processes of ≥95°C for ≥33.8 mins was needed to ensure a recommended 5-log reduction of B. subtilis spores and limit vitamin C degradation of pineapple juice within three-week of storage at 4 °C.

Biohythane production and microbial characteristics of two alternating mesophilic and thermophilic two-stage anaerobic co-digesters fed with rice straw and pig manure

To investigate biohythane production and microbial behavior during temperature-phased (TP) anaerobic co-digestion (AcD) of rice straw (RS) and pig manure (PM), a mesophilic-thermophilic (M1-T1) AcD system and a thermophilic-mesophilic (T2-M2) AcD system were continuously operated for 95 days in parallel. The maximal ratio (8.44%v/v) of produced hydrogen to methane demonstrated the feasibility of biohythane production by co-digestion of RS and PM. T2-M2 exhibited higher hydrogen (16.68 ± 1.88 mL/gVS) and methane (197.73 ± 11.77 mL/gVS) yields than M1-T1 (3.08 ± 0.39 and 109.03 ± 4.97 mL/gVS, respectively). Methanobrevibacter (75.62%, a hydrogenotrophic methanogen) dominated in the M1 reactor, resulting in low hydrogen production. Hydrogen-producing bacteria (Thermoanaerobacterium 32.06% and Clostridium_sensu_stricto_1 27.33%) dominated in T2, but the abundance of hydrolytic bacteria was low, indicating that hydrolysis could be a rate-limiting step. The thermophilic acid-producing phase provided effective selective pressure for hydrogen-consuming microbes, and the high diversity of microbes in M2 implied a more efficient pathway of methane production.

Bioaugmentation enhances dark fermentative hydrogen production in cultures exposed to short-term temperature fluctuations

Hydrogen-producing mixed cultures were subjected to a 48-h downward or upward temperature fluctuation from 55 to 35 or 75 °C. Hydrogen production was monitored during the fluctuations and for three consecutive batch cultivations at 55 °C to evaluate the impact of temperature fluctuations and bioaugmentation with synthetic mixed culture of known H₂ producers either during or after the fluctuation. Without augmentation, H₂ production was significantly reduced during the downward temperature fluctuation and no H₂ was produced during the upward fluctuation. H₂ production improved significantly during temperature fluctuation when bioaugmentation was applied to cultures exposed to downward or upward temperatures. However, when bioaugmentation was applied after the fluctuation, i.e., when the cultures were returned to 55 °C, the H₂ yields obtained were between 1.6 and 5% higher than when bioaugmentation was applied during the fluctuation. Thus, the results indicate the usefulness of bioaugmentation in process recovery, especially if bioaugmentation time is optimised.

Mesophilic Sporeformers Identified in Whey Powder by Using Shotgun Metagenomic Sequencing

Spoilage and pathogenic spore-forming bacteria are a major cause of concern for producers of dairy products. Traditional agar-based detection methods employed by the dairy industry have limitations with respect to their sensitivity and specificity. The aim of this study was to identify low-abundance sporeformers in samples of a powdered dairy product, whey powder, produced monthly over 1 year, using novel culture-independent shotgun metagenomics-based approaches. Although mesophilic sporeformers were the main target of this study, in one instance thermophilic sporeformers were also targeted using this culture-independent approach. For comparative purposes, mesophilic and thermophilic sporeformers were also tested for within the same sample using culture-based approaches. Ultimately, the approaches taken highlighted differences in the taxa identified due to treatment and isolation methods. Despite this, low levels of transient, mesophilic, and in some cases potentially pathogenic sporeformers were consistently detected in powder samples. Although the specific sporeformers changed from one month to the next, it was apparent that 3 groups of mesophilic sporeformers, namely, Bacillus cereus, Bacillus licheniformis/Bacillus paralicheniformis, and a third, more heterogeneous group containing Brevibacillus brevis, dominated across the 12 samples. Total thermophilic sporeformer taxonomy was considerably different from mesophilic taxonomy, as well as from the culturable thermophilic taxonomy, in the one sample analyzed by all four approaches. Ultimately, through the application of shotgun metagenomic sequencing to dairy powders, the potential for this technology to facilitate the detection of undesirable bacteria present in these food ingredients is highlighted.IMPORTANCE The ability of sporeformers to remain dormant in a desiccated state is of concern from a safety and spoilage perspective in dairy powder. Traditional culturing techniques are slow and provide little information without further investigation. We describe the identification of mesophilic sporeformers present in powders produced over 1 year, using novel shotgun metagenomic sequencing. This method allows detection and identification of possible pathogens and spoilage bacteria in parallel. Strain-level analysis and functional gene analysis, such as identification of toxin genes, were also performed. This approach has the potential to be of great value with respect to the detection of spore-forming bacteria and could allow a processor to make an informed decision surrounding process changes to reduce the risk of spore contamination.