Dummy-template molecularly imprinted solid phase extraction for selective analysis of ractopamine in pork

Magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers for ultrarapid determination of ractopamine residues from food samples by capillary electrophoresis

An ultrafast, efficient, and eco-friendly method combining magnetic solid phase extraction and capillary electrophoresis with diode array detection have been developed to determine ractopamine residues in food samples. A restricted access material based on magnetic and mesoporous molecularly imprinted polymer has been properly synthesized and characterized, demonstrating excellent selectivity and high adsorbent capacity. Short-end injection capillary electrophoresis method was optimized: 75 mM triethylamine pH 7 as BGE, -20 kV, 50 mbar by hydrodynamic injection during 8 s, and capillary temperature at 25 °C; reaching ultrafast ractopamine analysis (∼0.6 min) with good peak asymmetry, and free from interfering and/or baseline noise. After sample preparation optimization, the conditions were: 1000 µL of sample at pH 6, 20 mg of adsorbent, stirring time of 120 s, 250 µL of ultrapure water as washing solvent, 1000 µL of methanol: acetic acid (7: 3, v/v) as eluent, and the adsorbent can be reused four times. In these conditions, the analytical method showed recoveries around to 100 %, linearity ranged from 9.74 to 974.0 µg kg-1, correlation coefficient (r) ≥ 0,99 in addition to adequate precision, accuracy, and robustness. After proper validation, the method was successfully applied in the analysis ractopamine residues in bovine milk and bovine and porcine muscle.

Highly efficient nanocomposites based on molecularly imprinted magnetic covalent organic frameworks for selective extraction of bisphenol A from liquid matrices

Highly efficient nanocomposites, hydrophobic molecularly imprinted magnetic covalent organic frameworks (MI-MCOF), have been farbricated by a facile Schiff-base reaction. The MI-MCOF was based on terephthalaldehyde (TPA) and 1,3,5-tris(4-aminophenyl) benzene (TAPB) as functional monomer and crosslinker, anhydrous acetic acid as catalyst, bisphenol AF as dummy template, and NiFe₂O₄ as magnetic core. This organic framework significantly reduced the time consumption of conventional imprinted polymerization and avoided the use of traditional initiator and cross-linking agents. The synthesized MI-MCOF exhibited superior magnetic responsivity and affinity, as well as high selectivity and kinetics for bisphenol A (BPA) in water and urine samples. The equilibrium adsorption capacity (Q_e) of BPA on the MI-MCOF was 50.65 mg g^-1, which was 3-7-fold higher than of its three structural analogues. The imprinting factor of BPA reached up to 3.17, and the selective coefficients of three analogues were all > 2.0, evidencing the excellent selectivity of fabricated nanocomposites to BPA. Based on the MI-MCOF nanocomposites, the magnetic solid-phase extraction (MSPE), combined with HPLC and fluorescence detection (HPLC-FLD), offered superior analytical performance: wide linear range of 0.1-100 μg L^-1, high correlation coefficient of 0.9996, low limit of detection of 0.020 μg L^-1, good recoveries of 83.5-110%, and relative standard deviations (RSDs) of 0.5-5.7% in environmental water, beverage, and human urine samples. Consequently, the MI-MCOF-MSPE/HPLC-FLD method provides a good prospect in selective extraction of BPA from complex matrices while replacing traditional magnetic separation and adsorption materials.

Application of molecularly imprinted polymers in the anti-doping field: sample purification and compound analysis

The problem posed by anti-doping requirements is one of the great analytical challenges; multiple compound detection at low ng ml-1 levels from complex samples, with requirements for exceptional confidence in results. This review surveys the design, synthesis and application of molecularly imprinted polymers (MIPs) in this field, focusing on the templating of androgenous anabolic steroids (AASs), as the most commonly abused substances, but also other WADA prohibited substances. Commentary on the application of these materials in detection, clean-up and sensing is offered, alongside views on the future of imprinting in this field.

A novel colorimetric immunosensor based on platinum colloid nanoparticles immobilized on PowerVision as signal probes and Fe3 O4 @β-cyclodextrin as capture probes for ractopamine detection in pork

BACKGROUND

A novel colorimetric immunosensor was developed for the simple, sensitive and selective detection of ractopamine (RAC) based on using β-cyclodextrin-modified Fe₃ O₄ particles (Fe₃ O₄ @β-CD) as capture probes and complex platinum colloid nanoparticles (PtNPs-PV) composed of platinum colloid nanoparticles (PtNPs) and polymerase chelate PowerVision (PV) as signal probes.

RESULTS

PtNPs-PV double catalyzed the chromogenic substrate 3,3'-diaminobenzidine (DAB), which induced changes in the color of DAB and chromogenic absorbance. Incubation temperature, pH and incubation time were systematically optimized and, under optimum conditions, the measured absorbance values showed a linear relationship with the RAC concentrations in the range 0.03-8.1 ng mL^-1 . The detection limit was 0.01 ng mL^-1 . The sensor exhibited high sensitivity and specificity, as demonstrated by testing structurally similar organic compounds such as salbutamol, clenbuterol and dopamine. The practicality of the developed colorimetric immunosensor was supported by the successful detection of RAC in pork samples with recovery ranging from 94.00% to 106.00%.

CONCLUSION

We designed a novel sandwich-type noncompetitive colorimetric immunoassay for the detection of trace levels of RAC in pork. The proposed method can also be used for the detection of toxins in food products via PtNPs-PV amplification. © 2018 Society of Chemical Industry.

Enhancement of surface plasmon resonance signals using a MIP/GNPs/rGO nano-hybrid film for the rapid detection of ractopamine

A novel surface plasmon resonance (SPR) sensor that uses molecular imprinted polymers (MIPs) coated with gold nanoparticles (GNPs) and reduced graphene oxide (rGO) as a sensing nano-hybrid film was developed for detection of ractopamine. The MIPs were synthesized by precipitation polymerization and characterized by scanning electron microscopy and Scatchard analysis. The GNPs/rGO composite was synthesized by a single-step reduction of graphene oxide and HAuCl4 solution. The MIP/GNPs/rGO nano-hybrid film was immobilized onto a bare sensor chip and exhibited remarkable sensitivity and stability by the “grafting to” method with the assistance of ionic liquid (IL) as a binder. The prepared sensor showed class-specific selectivity for ractopamine (RAC) and its analogs under optimized conditions. The novel SPR sensor had a wide linear range over an RAC concentration from 20 to 1000 ng/mL with a detection limit of 5 ng/mL (S/N=3). The results demonstrated that the MIP/GNPs/rGO nano-hybrid film was suitable as the recognition element of the SPR sensorfor rapid screening and detection of beta-agonists such as RAC.

Development of dummy molecularly imprinted based on functionalized silica nanoparticles for determination of acrylamide in processed food by matrix solid phase dispersion

A novel technique was applied for the synthesis of dummy molecularly imprinted silica nanoparticles (DMISNPs). DMISNPs were characterized by Fourier transmission infrared spectrometry, scanning electron microscopy and transmission electron microscope. The material was used as dispersant for the analysis of biscuit and bread samples using matrix solid phase dispersion (MSPD). Of advantages of such approach may be counted as the simplicity of synthesis procedure, low consumption of organic solvent, mild working temperature during the synthesis, high binding capacity and affinity. The effect of various parameters such as sample-to-dispersant ratio and eluents volume on extraction recovery was investigated and optimized by central composite design under response surface methodology. It was proven that the proposed dispersant leads to high affinity toward acrylamide even in complicated matrices. Quantification of the acrylamide was carried out by high performance liquid chromatography with UV detection (HPLC-UV).

Development of hydrophilic magnetic molecularly imprinted polymers by directly coating onto Fe3O4 with a water-miscible functional monomer and application in a solid-phase extraction procedure for iridoid glycosides

Development of hydrophilic magnetic molecularly imprinted polymers by directly coating onto Fe₃O₄ with a water-miscible functional monomer and application in a solid-phase extraction procedure for iridoid glycosides.

Environmentally Friendly Method: Development and Application to Carbon Aerogel as Sorbent for Solid-Phase Extraction

We developed two simple, fast, and environmentally friendly methods using carbon aerogel (CA) and magnetic CA (mCA) materials as sorbents for micro-solid-phase extraction (μ-SPE) and magnetic solid-phase extraction (MSPE) techniques. The material performances such as adsorption isotherm, adsorption kinetics, and specific surface area were discussed by N2 adsorption-desorption isotherm measurements, ultraviolet and visible (UV-vis) spectrophotometry, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (HR-TEM). The experimental results proved that the heterogeneities of CA and mCA were well modeled with the Freundlich isotherm model, and the sorption process well followed the pseudo-second-order rate equation. Moreover, plant growth regulators (PGRs) such as kinetin (6-KT), 6-benzylaminopurine (6-BA), 2,4-dichlorophenoxyacetic acid (2,4-D), and uniconazole (UN) in a reservoir raw water sample were selected as the evaluation of applicability for the proposed μ-SPE and MSPE techniques using high performance liquid chromatography (HPLC). The experimental conditions of two methods such as the amount of sorbent, extraction time, pH, salt concentration, and desorption conditions were studied. Under the optimized conditions, two extraction methods provided high recoveries (89-103%), low the limits of detection (LODs) (0.01-0.2 μg L(-1)), and satisfactory analytical features in terms of precision (relative standard deviation, RSD, 1.7-5.1%, n=3). This work demonstrates the feasibility and the potential of CA and mCA materials as sorbents for μ-SPE and MSPE techniques. Besides, it also could serve as a basis for future development of other functional CAs in pretreatment technology and make them valuable for analysis of pollutants in environmental applications.

Simple and sensitive monitoring of β2-agonist residues in meat by liquid chromatography-tandem mass spectrometry using a QuEChERS with preconcentration as the sample treatment

A liquid chromatography with tandem mass spectrometric detection (LC-MS/MS) method was established for the simultaneous determination of the levels of 10 β2-agonists in meat. The samples were extracted using an aqueous acidic solution and cleaned up using a Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) technique utilising a DVB-NVP-SO3Na sorbent synthesised in-house. First, the β2-agonist residues were extracted in an aqueous acidic solution, followed by matrix solid-phase dispersion for clean-up. The linearities of the method were R(2)=0.9925-0.9998, with RSDs of 2.7-15.3% and 73.7-103.5% recoveries. Very low limits of detection (LOD) and quantitation (LOQ) of 0.2-0.9 μg/kg and 0.8-3.2 μg/kg, respectively, were achieved for spiked meat. The values obtained were lower than the maximum residue limits (MRLs) established by the EU and China. These results clearly demonstrate the feasibility of the proposed approach. The evaluated method provided reliable screening, quantification and identification of 10 β2-agonists in meat.

A porous hybrid imprinted membrane for selectively anchoring target proteins from a complex matrix

The proposed route for the polymerization of CP/CNT/DA-MIM (A) and the recognition protocol of CP/CNT/DA-MIM (B).

Application of functionalized magnetic nanoparticles in sample preparation

Functionalized magnetic nanoparticles have attracted much attention in sample preparation because of their excellent performance compared with traditional sample-preparation sorbents. In this review, we describe the application of magnetic nanoparticles functionalized with silica, octadecylsilane, carbon-based material, surfactants, and polymers as adsorbents for separation and preconcentration of analytes from a variety of matrices. Magnetic solid-phase extraction (MSPE) techniques, mainly reported in the last five years, are presented and discussed.