Enhanced bioavailability and bioefficacy of an amorphous solid dispersion of curcumin

Sweeteners Show a Plasticizing Effect on PVP K30-A Solution for the Hot-Melt Extrusion of Fixed-Dose Amorphous Curcumin-Hesperetin Solid Dispersions

The co-administration of curcumin and hesperetin might be beneficial in terms of neuroprotective activity; therefore, in this study, we attempted to develop a fixed-dose formulation comprising these two compounds in an amorphous state. The aim of obtaining an amorphous state was to overcome the limitations of the low solubility of the active compounds. First, we assessed the possibility of using popular sweeteners (erythritol, xylitol, and sorbitol) as plasticizers to reduce the glass transition temperature of PVP K30 to prepare the polymer-excipient blends, which allowed the preparation of amorphous solid dispersions via hot-melt extrusion at a temperature below the original glass transition of PVP K30. Erythritol proved to be the superior plasticizer. Then, we focused on the development of fixed-dose amorphous solid dispersions of curcumin and hesperetin. Powder X-ray diffraction and thermal analysis confirmed the amorphous character of dispersions, whereas infrared spectroscopy helped to assess the presence of intermolecular interactions. The amorphous state of the produced dispersions was maintained for 6 months, as shown in a stability study. Pharmaceutical parameters such as dissolution rate, solubility, and in vitro permeability through artificial membranes were evaluated. The best improvement in these features was noted for the dispersion, which contained 15% of the total content of the active compounds with erythritol used as the plasticizer.

Characterization and bioactivities of coffee husks extract encapsulated with polyvinylpyrrolidone

Coffee processing generates large amounts of residues of which a portion still has bioactive properties due to their richness in phenolic compounds. This study aimed to obtain a coffee husks extract (CHE) and to encapsulate it (ECHE) with polyvinylpyrrolidone using a one-step procedure of solid dispersion. The extraction and encapsulation yields were 9.1% and 92%, respectively. Thermal analyses revealed that the encapsulation increased the thermal stability of CHE and dynamic light scattering analyses showed a bimodal distribution of size with 81% of the ECHE particles measuring approximately 711 nm. Trigonelline and caffeine were the main alkaloids and quercetin the main phenolic compound in CHE, and the encapsulation tripled quercetin extraction. The total phenolics content and the antioxidant activity of ECHE, assayed with three different procedures, were higher than those of CHE. The antioxidant activity and the bioaccessibility of the phenolic compounds of ECHE were also higher than those of CHE following simulated gastrointestinal digestion (SGID). Both CHE and ECHE were not toxic against Alliumcepa cells and showed similar capacities for inhibiting the pancreatic α-amylase in vitro. After SGID, however, ECHE became a 1.9-times stronger inhibitor of the α-amylase activity in vitro (IC50 = 8.5 mg/mL) when compared to CHE. Kinetic analysis revealed a non-competitive mechanism of inhibition and in silico docking simulation suggests that quercetin could be contributing significantly to the inhibitory action of both ECHE and CHE. In addition, ECHE (400 mg/kg) was able to delay by 50% the increases of blood glucose in vivo after oral administration of starch to rats. This finding shows that ECHE may be a candidate ingredient in dietary supplements used as an adjuvant for the treatment of diabetes.

Effect of hot-melt extruded Morus alba leaves on intestinal microflora and epithelial cells

Although rutin and isoquercitrin have many effects, they are insoluble substances, making it difficult to obtain pure substances. This study was to investigate whether Morus alba leaves containing rutin and isoquercitrin could improve intestinal health by making a sustained-release formulation through a hot-melt extrusion (HME) process with improved stability and solubility and determine whether it could upregulate the balance of intestinal microorganisms and intestinal epithelial cells. A sustained-release formulation was prepared by the HME process using Morus alba leaves and a hydrophilic polymer matrix. Antibacterial activities of pathogenic microorganisms (Escherichia coli, Streptococcus aureus, Enterococcus faecalis) and proliferative effect of probiotics (Lactobacillus rhamnosus, Pediococcus pentosaceus) were tested against intestinal microorganisms. Regarding intestinal epithelial cells, a co-culture model of Caco-2 cells and RAW 264.7 cells was used. It was confirmed that the extrudate exhibited high antibacterial activities against pathogenic microorganisms and affected the proliferation of probiotics. Furthermore, after inducing inflammation through LPS, it recovered transepithelial electrical resistance-increased levels of tight junction proteins and decreased expression levels of pro-inflammatory cytokines. HME of Morus alba leaves containing rutin and isoquercitrin can upregulate intestinal microbial balance and intestinal epithelial cells.

Dual-Drug Delivery by Anisotropic and Uniform Hybrid Nanostructures: A Comparative Study of the Function and Substrate-Drug Interaction Properties

By utilizing nanoparticles to upload and interact with several pharmaceuticals in varying methods, the primary obstacles associated with loading two or more medications or cargos with different characteristics may be addressed. Therefore, it is feasible to evaluate the benefits provided by co-delivery systems utilizing nanoparticles by investigating the properties and functions of the commonly used structures, such as multi- or simultaneous-stage controlled release, synergic effect, enhanced targetability, and internalization. However, due to the unique surface or core features of each hybrid design, the eventual drug-carrier interactions, release, and penetration processes may vary. Our review article focused on the drug's loading, binding interactions, release, physiochemical, and surface functionalization features, as well as the varying internalization and cytotoxicity of each structure that may aid in the selection of an appropriate design. This was achieved by comparing the actions of uniform-surfaced hybrid particles (such as core-shell particles) to those of anisotropic, asymmetrical hybrid particles (such as Janus, multicompartment, or patchy particles). Information is provided on the use of homogeneous or heterogeneous particles with specified characteristics for the simultaneous delivery of various cargos, possibly enhancing the efficacy of treatment techniques for illnesses such as cancer.

Delivery of curcumin in a carboxymethyl cellulose and hydroxypropyl methyl cellulose carrier: Physicochemical properties and biological activity

Curcumin solid dispersions (Cur SDs) were prepared using hydroxypropyl methyl cellulose (HPMC) and sodium carboxymethyl cellulose (CMC) at different dosages. The results of Fourier transform infrared spectroscopy and Raman spectroscopy showed that the characteristic peak of curcumin shifted, and the addition of CMC enhanced this phenomenon. The addition of CMC reduced the contact angle, increased the surface free energy, and improved the solubility of Cur SDs. These changes were positively correlated with the amount of CMC. The surface morphology of Cur SDs changed from needle-like to sheet-like as observed by scanning electron microscopy. Cur SDs prepared by CMC and HPMC retained good biological activity. HT-29 human colon cancer cell analysis showed that the addition of CMC significantly improved the anti-proliferation effect of Cur SDs, thus enhancing the bioavailability of curcumin. Solid dispersions made with CMC and HPMC will be a promising hydrocolloid carrier to improve oral bioavailability and efficacy of curcumin.

Development of a Water-Dispersible Supramolecular Complex of Polyphenol with Polypeptides for Attenuation of the Allergic Response using a Mechanochemical Strategy

The prevalence of allergic disorders has increased worldwide in recent decades. Polyphenols, including resveratrol and curcumin, are posited to have potential as therapeutic agents for allergy; however, their use has been limited by poor water solubility. Accordingly, a highly concentrated, water dispersible, supramolecular complexes of polyphenols with polypeptides (poly-L-lysine, poly-γ-glutamic acid) and gelatin using high-speed vibration milling are developed. The complex exhibited resistance to photobleaching and thermal radiation. Treatment of a rat basophilic leukemia cell line (RBL-2H3) with polypeptide complexes containing resveratrol is suppressed allergic responses in vitro. Moreover, aerosolized administration of polypeptide complexes is demonstrated excellent bioavailability and inhibition of immediate hypersensitivity reactions in ear tissue in vivo. Furthermore, the method avoids the use of organic solvent and therefore reduces undesirable biological responses.

The Effect of Hot-Melt Extrusion of Mulberry Leaf on the Number of Active Compounds and Antioxidant Activity

The aim of this study is to compare the functions of the physiologically active compounds of three types of mulberry leaf by cultivar, and to confirm the changes using hot-melt extrusion (HME-ML). The active components of mulberry leaf were analyzed using the HPLC system, and total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity were measured. Among the three varieties, the highest contents of rutin and isoquercetin were detected in Cheongil, of TPC in Cheongol, and of TFC in Cheongil. It was confirmed that this bio-accessibility was increased in HME-ML compared with the control. The DPPH radical scavenging activity of Cheongol showed greater antioxidant properties, and HME showed improvement in the antioxidant properties of all mulberry leaves. These results suggest that the application of HME technology can improve the biological activities of mulberry leaf.

Current Trends on Solid Dispersions: Past, Present, and Future

Solid dispersions have achieved significant interest as an effective means of enhancing the dissolution rate and thus the bioavailability of a range of weakly water-soluble drugs. Solid dispersions of weakly water-soluble drugs with water-soluble carriers have lowered the frequency of these problems and improved dissolution. Solid dispersion is a solubilization technology emphasizing mainly on, drug-polymer two-component systems in which drug dispersion and its stabilization is the key to formulation development. Therefore, this technology is recognized as an exceptionally useful means of improving the dissolution properties of poorly water-soluble drugs and in the latest years, a big deal of understanding has been accumulated about solid dispersion, however, their commercial application is limited. In this review article, emphasis is placed on solubility, BCS classification, and carriers. Moreover, this article presents the diverse preparation techniques for solid dispersion and gathers some of the recent technological transfers. The different types of solid dispersions based on the carrier used and molecular arrangement were underlined. Additionally, it summarizes the mechanisms, the methods of preparing solid dispersions, and the marketed drugs that are available using solid dispersion approaches.

Proximate, Elemental, and Functional Properties of Novel Solid Dispersions of Moringa oleifera Leaf Powder

Moringa oleifera leaf powder (MOLP) is a rich source of antioxidants, protein, minerals, vitamins, and various phytochemicals and has been used to combat malnutrition in many countries. However, despite its many benefits, MOLP has low a solubility in water, necessitating the development of ways to address this issue. To improve the solubility of MOLP, solid-dispersed Moringa oleifera leaf powders (SDMOLPs) have been developed through freeze-drying, melting, microwave irradiation, and solvent evaporation methods using polyethylene glycols (PEG4000 and PEG6000) (1:1) as hydrophilic carriers. The solid dispersions were evaluated for their proximate composition using standard analytical procedures. Elemental composition was characterized using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). Water absorption capacity (WAC) and water-solubility were further evaluated as functional properties. Proximate composition revealed that MOLP and SDMOLPs were rich in protein, energy, carbohydrate, ash, and fat contents. MOLP solid dispersions are a major source of minerals (Ca, Mg, Cu, and Zn), and can be used to alleviate many mineral deficiencies. All solid dispersions had significantly higher (p < 0.05) solubilities (ranging from 54 to 64%) and WAC (ranging from 468.86 to 686.37%), relative to that of pure MOLP. The increased solubility of SDMOLPs may be attributed to the hydrogen bonds and intermolecular interactions between MOLP and the hydrophilic carriers. The results indicate that the solid dispersion technique can be successfully employed to improve the solubility of MOLP. And the solid-dispersed MOLPs with enhanced functional properties may be useful as functional ingredients in foods and beverages, dietary supplements, or nutraceutical formulations.

Trends in advanced oral drug delivery system for curcumin: A systematic review

Although curcumin is globally recognized for its health benefits, its clinical application has been restricted by its poor aqueous solubility and stability. To overcome these limitations, nanocarrier-based drug delivery systems (NDS) are one of the most effective approaches being extensively explored over the last few decades to improve curcumin's physicochemical and pharmacological effects. Various NDS could provide productive platforms for addressing the formulation challenge of curcumin, but evidence of such systems has not been summarized. This study aimed to systematically review current evidence of lipid and polymer-based NDS for an oral delivery of curcumin focusing on in vivo models and clinical studies. Among the 48 included studies, 3 studies were randomized controlled clinical trials, while 45 studies were animal models. To date, only five curcumin NDS have been studied in healthy volunteers: γ-cyclodextrin, phytosome, liposome, microemulsion and solid dispersion, while most curcumin NDS have been studied in animal models. Most included studies found that NDS could increase oral bioavailability of curcumin as compared to free curcumin. In conclusion, this systematic review showed evidence of the positive effect of NDS for enhancement of oral bioavailability of curcumin. EXECUTIVE SUMMARY: Curcumin is globally recognized for its health benefits, but its clinical application has been limited by its poor aqueous solubility and stability, which causes poor absorption in the gastrointestinal tract (GI tract) via oral administration. Nanocarrier-based drug delivery systems (NDS) are considered as a productive platform to solve the formulation challenge of curcumin, but evidence of such systems has not been summarized. This study aimed to systematically review current evidence of lipid and polymer-based NDS for an oral delivery of curcumin focusing on in vivo models and clinical studies. Overall, most studies found that all studied NDS could increase the absorption of curcumin as compared to free curcumin. Curcumin was rapidly absorbed and exhibited a long residence time after oral administration of curcumin NDS. In summary, this systematic review showed positive impacts of NDS for enhancement of oral absorption of curcumin.

Physicochemical and Biochemical Evaluation of Amorphous Solid Dispersion of Naringenin Prepared Using Hot-Melt Extrusion

Naringenin (NRG) is a plant-derived flavonoid. Due to its antioxidant, anti-inflammatory, and analgesic activities it is beneficial to human health and is often used as a functional food ingredient; however, it has poor water solubility and low in vivo bioavailability. Therefore, the efficacy of NRG can be improved by enhancing its water solubility to increase gastrointestinal absorption. Conventional methods for the formulation of NRG are very complex and use toxic organic solvents, making them impractical for the production of functional foods. The objective of this study was to develop a safe and effective NRG-based functional food material. Previously, we established a technology to prepare amorphous solid dispersions (SDs) from functional food ingredients with poor water solubility and used hot-melt extrusion technology that is comparatively simple and does not involve the use of organic solvents. In this study, we prepared NRG SD and evaluated them both physicochemically and biochemically. NRG SD had superior water solubility and gastrointestinal absorption relative to native NRG and showed higher analgesic efficacy in rats than crystalline NRG. NRG SD was administered to mice in a mixed diet for 28 days, and organ weights and hematological/clinical biochemical parameters were assessed. NRG SD did not demonstrate severe adverse effects. The results suggest that NRG SD is a safe and highly efficacious formulation that can be used as a functional food material in the future.

Apigenin-oxymatrine binary co-amorphous mixture: Enhanced solubility, bioavailability, and anti-inflammatory effect

Apigenin (APG) is a functional ingredient in many foods, but its poor water solubility results in low bioavailability. This study aimed at delivering APG and improving bioavailability by a food-friendly co-amorphous formulation of APG with oxymatrine (OMT). After preparation of co-amorphous mixture (CM), characterized by powder x-ray diffraction and thermal analysis. Then, the presence of hydrogen bonds was confirmed by vibrational spectroscopy and molecular dynamics simulation. Furthermore, phase solubility and solubility studies, as well as dissolution test indicated that complexation occurred between APG and OMT in solution, which significantly improved the solubility and dissolution of APG-OMT CM. Additionally, pharmacokinetics and biological activity indicated that APG-OMT CM exhibited higher oral bioavailability and anti-inflammatory effect than pure APG. These results suggest that APG-OMT CM may be great potential for application in functional food. Importantly, the study provides a promising delivery system to improve the bioavailability of hydrophobic food ingredients.

Dietary Plant Polyphenols as the Potential Drugs in Neurodegenerative Diseases: Current Evidence, Advances, and Opportunities

Neurodegenerative diseases, including Alzheimer’s disease (AD), Parkinson’s disease (PD), and Huntington’s disease (HD), are characterized by the progressive degeneration of neurons. Although the etiology and pathogenesis of neurodegenerative diseases have been studied intensively, the mechanism is still in its infancy. In general, most neurodegenerative diseases share common molecular mechanisms, and multiple risks interact and promote the pathologic process of neurogenerative diseases. At present, most of the approved drugs only alleviate the clinical symptoms but fail to cure neurodegenerative diseases. Numerous studies indicate that dietary plant polyphenols are safe and exhibit potent neuroprotective effects in various neurodegenerative diseases. However, low bioavailability is the biggest obstacle for polyphenol that largely limits its adoption from evidence into clinical practice. In this review, we summarized the widely recognized mechanisms associated with neurodegenerative diseases, such as misfolded proteins, mitochondrial dysfunction, oxidative damage, and neuroinflammatory responses. In addition, we summarized the research advances about the neuroprotective effect of the most widely reported dietary plant polyphenols. Moreover, we discussed the current clinical study and application of polyphenols and the factors that result in low bioavailability, such as poor stability and low permeability across the blood-brain barrier (BBB). In the future, the improvement of absorption and stability, modification of structure and formulation, and the combination therapy will provide more opportunities from the laboratory into the clinic for polyphenols. Lastly, we hope that the present review will encourage further researches on natural dietary polyphenols in the treatment of neurodegenerative diseases.

The potential of natural products use in fused deposition modeling 3D printing of pharmaceutical dosage forms

In recent years, the interest in 3D printing of medicines has increased due to many advantages of this technology, such as flexibility of the dose and dosage form of the printed product. Fused deposition modeling (FDM) is one of the most popular 3D printing technologies in the pharmaceutical field, due to its low cost and simplicity. The subject of this review is the potential use of natural products as biodegradable and biocompatible materials with good safety profiles in FDM 3D printing of pharmaceuticals. Natural products such as alginate, chitosan and starch have already been employed as excipients in FDM 3D printed pharmaceutical dosage forms, while others like shellac and zein show the potential, but haven't yet been part of 3D printed pharmaceutical formulations. These excipients have different roles in the formulation of filaments for FDM 3D printing, for example as fillers, matrix carriers or drug-release modifiers. In addition, the possibility of incorporating active pharmaceutical ingredients of natural origin in filaments for FDM 3D printing was reviewed. High printing temperatures limit the use of natural products in FDM 3D printing. However, adequate selection of thermoplastic material and printing parameters can widen the use of natural products in FDM 3D printing of pharmaceutical dosage forms.

Drug Delivery Strategies for Curcumin and Other Natural Nrf2 Modulators of Oxidative Stress-Related Diseases

Oxidative stress is associated with a wide range of diseases characterised by oxidant-mediated disturbances of various signalling pathways and cellular damage. The only effective strategy for the prevention of cellular damage is to limit the production of oxidants and support their efficient removal. The implication of the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway in the cellular redox status has spurred new interest in the use of its natural modulators (e.g., curcumin, resveratrol). Unfortunately, most natural Nrf2 modulators are poorly soluble and show extensive pre-systemic metabolism, low oral bioavailability, and rapid elimination, which necessitates formulation strategies to circumvent these limitations. This paper provides a brief introduction on the cellular and molecular mechanisms involved in Nrf2 modulation and an overview of commonly studied formulations for the improvement of oral bioavailability and in vivo pharmacokinetics of Nrf2 modulators. Some formulations that have also been studied in vivo are discussed, including solid dispersions, self-microemulsifying drug delivery systems, and nanotechnology approaches, such as polymeric and solid lipid nanoparticles, nanocrystals, and micelles. Lastly, brief considerations of nano drug delivery systems for the delivery of Nrf2 modulators to the brain, are provided. The literature reviewed shows that the formulations discussed can provide various improvements to the bioavailability and pharmacokinetics of natural Nrf2 modulators. This has been demonstrated in animal models and clinical studies, thereby increasing the potential for the translation of natural Nrf2 modulators into clinical practice.

Anti-cancer activity of amorphous curcumin preparation in patient-derived colorectal cancer organoids

Despite its adverse effects, chemotherapy is generally used for the treatment of colorectal cancer (CRC). Development of supplement preparations targeting cancer stem cells (CSCs) that cause distant metastasis and drug resistance is required. Although curcumin is known to have anti-tumor, hepatoprotective, and hypoglycemic-like actions, its low water solubility, oral absorption, and bioavailability impede its therapeutic uses. Patient-derived organoid cultures can recapitulate heterogeneity, epithelial structures, and molecular imprints of their parental tissues. In the present study, anti-carcinogenic properties of amorphous curcumin (AC), a compound with improved solubility and bioavailability, were evaluated against human CRC organoids. Treatment with AC inhibited the cell viability of CRC organoids in a concentration-dependent manner. AC arrested the cell cycle of CRC organoids and induced apoptosis. AC inhibited phosphorylation of ERK. Expression of downstream signals of ERK, namely c-MYC and cyclin-D1, were inhibited. Expressions of CSC markers, CD44, LGR5, and CD133, were declined in the AC-treated CRC organoids. The combinational treatment of CRC organoids with AC and anti-cancer drugs, oxaliplatin, 5-FU, or irinotecan showed a synergistic activity. In vivo, AC decreased the tumor growth of CRC organoids in mice with the induction of necrotic lesions. In conclusion, AC diminished the cell viability of CRC organoids through the inhibition of proliferation-related signals and CSC marker expression in addition to arresting the cell cycle. Collectively, these data suggest the value of AC as a promising supplement that could be used in combination with anti-cancer drugs to prevent the recurrence and metastasis of CRC.

COMEDICATION OF RABEPRAZOLE SODIUM CAUSES POTENTIAL DRUG-DRUG INTERACTION WITH DIABETIC DRUG LINAGLIPTIN: In-vitro AND In-silico APPROACHES

Drug-drug interaction is a notable concern among physicians when prescribing multi-therapy to the patients as concomitant administration of multi-drugs might cause unexpected adverse drug reactions. The main objective of this research is to predict a potential drug-drug interaction between two frequently used drugs by diabetic patients, an antidiabetic drug (linagliptin) and a proton pump inhibitor (rabeprazole sodium). Here, several in vitro techniques, including thermal (melting point, thermogravimetric analysis [TGA]), morphological (scanning electron microscopy [SEM] and X-ray powder diffraction [XRPD] analysis), highly sophisticated synchronous fluorescence, and in silico methods were applied to anticipate the potential drug-drug interaction between these stated drugs quickly. The melting point and TGA study revealed thermochemical properties, thermal stability profiles, and degradation patterns upon temperature rising of the formed complex and these precursor drugs. The SEM and XRPD have provided the morphological changes like particle shape and size distribution of the desired molecule that might be caused due to the potential drug-drug interactions. Besides, the drastic reduction of the quenching rate constant of linagliptin during interaction with bovine serum albumin in synchronous fluorescence also endorsed the potential drug-drug interaction. Furthermore, the drug-receptor docking analysis demonstrated that the binding affinity of the precursor ligands might be reduced due to the predicted drug-drug interaction. However, the current evidence warrants extensive investigation to confirm the above-stated potential drug-drug interaction in the larger animal model. Finally, clinical data need to be closely monitored during the treatment of diabetic patients prescribed with linagliptin and rabeprazole sodium.

Preparation of Curcumin-Eudragit® E PO Solid Dispersions with Gradient Temperature through Hot-Melt Extrusion

Hot-melt extrusion (HME) has great advantages for the preparation of solid dispersion (SD), for instance, it does not require any organic solvents. Nevertheless, its application to high-melting-point and thermosensitive drugs has been rarely reported. In this study, thermally unstable curcumin (Cur) was used as a drug model. The HME process was systematically studied by adjusting the gradient temperature mode and residence time, with the content, crystallinity and dissolution of Cur as the investigated factors. The effects of barrel temperature, screw speed and cooling rate on HME were also examined. Solubility parameters and the Flory-Huggins method were used to evaluate the miscibility between Cur and carriers. Differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, equilibrium solubility and in vitro and in vivo experiments were used to characterize and evaluate the results. An amorphous Cur SD was successfully obtained, increasing the solubility and release of Cur. In the optimal process, the mass ratio of Cur to Eudragit® E PO (EPO) was 1:4 and the barrel temperature was set at a gradient heating mode (130 °C-135 °C-140 °C-145 °C-150 °C-155 °C-160 °C) at 100 rpm. Related pharmacokinetic test results also showed the improved bioavailability of the drug in rats. In a pharmacodynamic analysis of Sprague-Dawley rats, the Cmax and the bioavailability of the Cur-EPO SD were 2.6 and 1.5 times higher than those of Cur, respectively. The preparation of the amorphous SD not only provided more solubility but also improved the bioavailability of Cur, which provides an effective way to improve the bioavailability of BCS II drugs.

Therapeutic Effects of Curcumin against Bladder Cancer: A Review of Possible Molecular Pathways

There are concerns about the increased incidence of cancer both in developing and developed countries. In spite of recent progress in cancer therapy, this disease is still one of the leading causes of death worldwide. Consequently, there have been rigorous attempts to improve cancer therapy by looking at nature as a rich source of naturally occurring anti-tumor drugs. Curcumin is a well-known plant-derived polyphenol found in turmeric. This compound has numerous pharmacological effects such as antioxidant, anti-inflammatory, antidiabetic and anti-tumor properties. Curcumin is capable of suppressing the growth of a variety of cancer cells including those of bladder cancer. Given the involvement of various signaling pathways such as PI3K, Akt, mTOR and VEGF in the progression and malignancy of bladder cancer, and considering the potential of curcumin in targeting signaling pathways, it seems that curcumin can be considered as a promising candidate in bladder cancer therapy. In the present review, we describe the molecular signaling pathways through which curcumin inhibits invasion and metastasis of bladder cancer cells.

Revealing Changes in Curcumin Bioavailability using Vitamin C as an Enhancer by HPLC-MS/MS

Background:

Curcumin (CUR), a natural isolated compound from turmeric, helps in fighting many diseases, but the broad application of curcumin has been limited ascribed to low bioavailability.

Objective:

The aim of this study is to pursue the enhancement of curcumin bioavailability through coadministration of vitamin C.

Methods:

Such purpose was achieved through the analysis of curcumin pharmacokinetics by highperformance liquid chromatography coupled with electrospray ionization - tandem mass spectrometry (HPLC - ESI - MS/MS). The plasma was separated on a C18 reverse-phase column using acetonitrile and ammonium formate solution (pH 6.5; 2.0 mM) at 0.8 mL/min. MS/MS detection was carried out in negative mode using mass patterns of m/z 367.0 > 216.7 for curcumin and m/z 265.2 > 223.9 for internal standard (honokiol).

Results:

Successful application of the proposed method in the pharmacokinetic study presented clear changes in key pharmacokinetic parameters, including the growth of AUC (0-t) up to 2.4 times, a 2.2- fold increase of Cmax, 2.2-fold loss of CL, and 1.5-fold diminishment of t1/2.

Conclusion:

An HPLC-ESI-MS/MS method for the determination of curcumin in rat plasma and validated the improvement of bioavailability of curcumin through co-administration of vitamin C was determined. These changes were reasoned to the inhibition of lipid peroxidation induced by the use of vitamin C. Such a simple strategy is possible to become an alternative for enhancing curcumin efficiency in practice.

Lipids for Taste masking and Taste assessment in pharmaceutical formulations

Pharmaceutical products often have drawbacks of unacceptable taste and palatability which makes it quite difficult for oral administration to some special populations like pediatrics and geriatrics. To curb this issue different approaches like coating, granulation, extrusion, inclusion complexation, ion-exchange resins, etc for taste masking are employed and among them use of lipids have drawn special attention of researchers. Lipids have a lower melting point which is ideal for incorporating drugs in some of these methods like hot-melt extrusion, melt granulation, spray drying/congealing and emulsification. Lipids play a significant role as a barrier to sustain the release of drugs and biocompatible nature of lipids increases their acceptability by the human body. Further, lipids provide vast opportunities of altering pharmacokinetics of the active ingredients by modulating release profiles. In taste sensors, also known as electronic tongue or e-tongue, lipids are used in preparing taste sensing membranes which are subsequently used in preparing taste sensors. Lipid membrane taste sensors have been widely used in assessing taste and palatability of pharmaceutical and food formulations. This review explores applications of lipids in masking the bitter taste in pharmaceutical formulations and significant role of lipids in evaluation of taste and palatability.

Amorphous systems for delivery of nutraceuticals: challenges opportunities

Amorphous solid products have recently gained a lot of attention as key solutions to improve the solubility and bioavailability of poorly soluble nutraceuticals. A pure amorphous drug is a high-energy form; physically/chemically unstable and so easily gets recrystallized into the less soluble crystalline form limiting solubility and bioavailability issues. Amorphous solid dispersion and co-amorphous are new formulation approach that stabilized unstable amorphous form through different mechanisms such as preventing mobility, high glass transition temperature and molecular interaction. Nutraceuticals have been received the utmost importance due to their health benefits. However, most of these compounds have been associated with poor oral bioavailability due to poor solubility, high lipophilicity, high melting point, poor permeability, degradability and rapid metabolism in the gastrointestinal tract (GIT) which limits its health benefits. This review provides us a systematic application of amorphous systems to the delivery of poorly soluble nutraceuticals, with the aim of overcoming their pharmacokinetic limitations and improved pharmacological potential. In particular, it describes the challenges associated with delivery of oral nutraceuticals, various methods involved in the preparation and characterization of amorphous systems and permeability enhancement of nutraceuticals are in detail.

Endogenous antioxidant properties of curcuminoids from Curcuma longa L. obtained by a single-step extraction/nanoencapsulation approach

Curcuminoids found in turmeric have attracted attention due to their remarkable biological activity. Nanoencapsulation may improve their technological properties, but extraction and encapsulation procedures could be time-consuming and expensive when carried out separately. This work aimed to combine extraction and nanoencapsulation steps to obtain curcuminoids-polyvinylpyrrolidone (PVP) nanoparticles directly from plant rhizomes. This single-step procedure was evaluated by a Rotatable Central Composite Design (RCCD) and optimized using desirability functions, resulting in the optimal conditions of temperature (29.9°C), ethanol (99%), and PVP (15.38 mg). Nanoencapsulation allowed curcuminoids to exert scavenging activity against superoxide anions donors and hydrogen peroxide in an aqueous medium, despite their poor water solubility. Curcuminoids-PVP nanoparticles could be used to formulate nutraceutical foods as an adjuvant to the endogenous antioxidant defense systems protecting against cellular damage. PRACTICAL APPLICATION: Simultaneous extraction and nanoencapsulation of curcuminoids from turmeric (Curcuma longa L.) was studied in this work. The combination of two processes in one single step reduces production time and costs, enhancing the feasibility of curcuminoids microparticles application into foodstuff. Moreover, since most foodstuff presents water in their composition, increase of curcuminoids water dispersibility could facilitate their incorporation into food matrices and improve the use of their health benefits, as results from this research demonstrated that encapsulated curcuminoids were able to scavenge reactive oxygen species in aqueous medium, even though they are lipophilic compounds.

Enhanced anti-tumor effects of the PD-1 blockade combined with a highly absorptive form of curcumin targeting STAT3

PD‐1/PD‐L1 immune checkpoint inhibitors are promising cancer immunotherapies however responses are still limited and the development of more effective combination immunotherapy is needed. We previously reported that STAT3 activation in cancer cells and immune cells was involved in immune‐resistant mechanisms. In this study, we evaluated the effect of highly absorptive forms of curcumin extracts and synthetic curcumin on anti‐tumor T cell responses. The curcumin po administration resulted in the significant augmentation of in vivo induction of tumor antigen‐specific T cells through restoration of dendritic cells (DCs) by inhibiting directly STAT3 in DCs and indirectly via reduced IL‐6 production from STAT3 activated cancer cells in 2 syngeneic MC38 and CT26 murine tumor models. Curcumin also showed direct DC enhancing activity and enhanced T cell induction for the immunized antigens in non‐tumor‐bearing mice and human hosts. Curcumin restored DC functions in xenogeneic nude mouse model implanted with high IL‐6‐producing human clear cell ovarian cancer cells. The combination of curcumin and PD‐1/PD‐L1 Abs demonstrated a synergistic anti‐tumor activity in MC38 murine tumor models. These results indicated that curcumin augments the induction of tumor antigen‐specific T cells by restoring the T cell stimulatory activity of DCs targeting activated STAT3 in both cancer cells and immune cells. Combination immunotherapy with curcumin and PD‐1/PD‐L1 Ab is an attractive strategy in the development of effective immunotherapy against various cancers.

Preparation and characterization of curcumin solid dispersion using HPMC

Curcumin solid dispersions were prepared using hydroxypropyl methylcellulose (HPMC) to enhance water solubility of curcumin. The particle size of curcumin solid dispersions was in range from 371 to 528 nm and particles were shaped as spherical with wrinkles. The encapsulation efficiency was over 93% for all samples, and water solubility of curcumin was significantly improved to 238 µg/mL when the ratio of curcumin to HPMC was 20:80. The results of X-ray diffraction, differential scanning calorimeter, and Fourier transform infrared spectroscopy showed that crystalline form of curcumin changed to amorphous form. Curcumin solid dispersions showed improved dissolution behavior compared to pure curcumin and the curcumin release kinetic studies were applied to find best-fitting model. This study showed a great potential of solid dispersion using HPMC as curcumin delivery system with improved water solubility and oral absorption. PRACTICAL APPLICATION: Curcumin has limited applications in the food industry because of low water solubility. Dongoh water-soluble curcumin (DW-CURs) were prepared by solid dispersion method with HPMC. Our results indicated that curcumin solid dispersions improved the water solubility of curcumin and showed a sustained release, demonstrating its possibility of body application. Therefore, DW-CURs are a promising formulation for application as a functional ingredient in the food industry.

Therapeutic Applications of Solid Dispersions for Drugs and New Molecules: In Vitro and In Vivo Activities

This review aims to provide an overview of studies that address the use, in therapeutic applications, of solid dispersions (SDs) with biological activities in vitro and/or in vivo mainly made up of polymeric matrices, as well as to evaluate the bioactive activity of their constituents. This bibliographic survey shows that the development of solid dispersions provides benefits in the physicochemical properties of bioactive compounds, which lead to an increase in their biological potential. However, despite the reports found on solid dispersions, there is still a need for biological assay-based studies, mainly in vivo, to assist in the investigation and to devise new applications. Therefore, studies based on such an approach are of great importance to enhance and extend the use of solid dispersions in the most diverse therapeutic applications.

Developmental Strategies of Curcumin Solid Dispersions for Enhancing Bioavailability

BACKGROUND

Although curcumin has been demonstrated to be beneficial in treating various diseases, its low solubility, chemical stability and bioavailability limit its application, especially in cancer therapy.

METHODS

Solid dispersions have been utilized in the last few decades to improve the bioavailability and stability of curcumin.

RESULTS

However, there is a lack of summaries and classifications of the methods for preparing curcumin with this technology. The current review aims to overview the strategies used to develop solid dispersions containing curcumin for improving drug delivery. The classification of techniques for creating solid dispersions for curcumin was summarized, including systems for protecting curcumin degradation despite its chemical stability. The applications of advanced nanotechnologies in recent studies of solid dispersions were also discussed to explain the roles of nanoparticles in formulations.

CONCLUSION

This overview of recent developments in formulating solid dispersions for improving curcumin bioavailability will contribute to future studies of curcumin for clinical development.

3D Printed Drug Delivery Systems Based on Natural Products

In the last few years, the employment of 3D printing technologies in the manufacture of drug delivery systems has increased, due to the advantages that they offer for personalized medicine. Thus, the possibility of producing sophisticated and tailor-made structures loaded with drugs intended for tissue engineering and optimizing the drug dose is particularly interesting in the case of pediatric and geriatric population. Natural products provide a wide range of advantages for their application as pharmaceutical excipients, as well as in scaffolds purposed for tissue engineering prepared by 3D printing technologies. The ability of biopolymers to form hydrogels is exploited in pressure assisted microsyringe and inkjet techniques, resulting in suitable porous matrices for the printing of living cells, as well as thermolabile drugs. In this review, we analyze the 3D printing technologies employed for the preparation of drug delivery systems based on natural products. Moreover, the 3D printed drug delivery systems containing natural products are described, highlighting the advantages offered by these types of excipients.

Doxorubicin and CD‑CUR inclusion complex co‑loaded in thermosensitive hydrogel PLGA‑PEG‑PLGA localized administration for osteosarcoma

Combination therapy is a promising and prevalent strategy for osteosarcoma treatment. Curcumin (CUR), as a chemosensitizer, improves the antitumor effect of first‑line chemotherapy drugs. However, due to its poor solubility and instability in physiological conditions, the bioavailability of CUR is limited. In order to improve the physicochemical properties of natural CUR, β‑cyclodextrin was adopted to generate a β‑cyclodextrin curcumin (CD‑CUR) inclusion complex. A thermosensitive hydrogel, poly(D,L‑lactide‑co‑glycolide)-poly(ethylene‑glycol)‑poly(D,L‑lactide‑co‑glycolide), was selected and synthesized to co‑deliver doxorubicin (DOX) and CD‑CUR to tumor sites. The dual‑drug delivery system (gel+DOX+CD‑CUR) was prepared by mixing drugs with hydrogels and had a perfect sol‑gel phase transition temperature (18.3˚C for 20% concentration). Both DOX and CUR were released from hydrogels in a sustained manner in PBS (pH 7.4) medium. The combination therapy based on DOX+CD‑CUR exhibited higher antitumor activity than monotherapies in vitro. Combined CD‑CUR therapy significantly downregulated Bcl‑2 expression and upregulated caspase‑3 expression, suggesting that DOX combined with CD‑CUR treatment has a higher apoptosis‑inducing efficiency. The antitumor efficiency of the gel+DOX+CD‑CUR strategy was evaluated in K‑7 tumor‑bearing mice, and this localized combination therapy demonstrated a higher antitumor efficiency compared with free DOX+CD‑CUR or single‑drug strategies. There were no significant differences in body weight and histological changes of major organs in each group. Therefore, the present combination treatment based on hydrogel may be a feasible approach to co‑deliver DOX and CD‑CUR to osteosarcoma tumor sites in clinical practice.

Zwitterionic Polymer Micelles with Dual Conjugation of Doxorubicin and Curcumin: Synergistically Enhanced Efficacy against Multidrug-Resistant Tumor Cells

This paper reports a novel redox-sensitive micellar system for the co-delivery of doxorubicin (Dox) and a chemosensitizer (curcumin, Cur) to overcome the multidrug resistance (MDR) in cancer cells. Dox and Cur were co-conjugated onto a zwitterionic polymer, poly(carboxybetaine) (pCB), to form Cur-pCB-Dox that self-assembled into stable micelles (164.2 ± 4.8 nm). Single-drug conjugates (pCB-Dox and pCB-Cur) were prepared for comparisons. Compared to the high half-maximal inhibitory concentration (IC₅₀) of Dox (437.2 μg/mL), the IC₅₀ value of pCB-Dox (14.1 μg/mL) was only 1/33 that of Dox. Confocal laser scanning microscopy and flow cytometry revealed the greatly enhanced cell uptake of the conjugate due to the enhanced permeability and retention effect of tumor cells on the micellar conjugate. Co-delivery of pCB-Dox with pCB-Cur further reduced the IC₅₀ value by 37% (8.9 μg/mL). More importantly, Cur-pCB-Dox exhibited the strongest cytotoxicity against MCF-7/Adr cells (IC₅₀, 5.87 μg/mL) because the co-delivered Dox and Cur on one carrier specifically transported into the same cells, which inhibited the efflux of Dox by Cur, led to a higher intracellular Dox concentration and made the drugs exert synergistic effects at the targeting regions. The results proved the zwitterionic micelles as promising drug co-delivery vehicles for fighting against MDR.

Nrf2 Activators as Dietary Phytochemicals Against Oxidative Stress, Inflammation, and Mitochondrial Dysfunction in Autism Spectrum Disorders: A Systematic Review

Autism spectrum disorder (ASD) is a pervasive neurodevelopmental disorder with limited available treatments and diverse causes. In ASD patients, numerous researches demonstrated various alterations in inflammation/immune, oxidative stress, and mitochondrial dysfunction, and these alterations could be regulated by Nrf2. Hence, we aimed to systematically review the current evidence about the effects of Nrf2 activator supplementation on ASD objects from in vitro studies, animal studies, and clinical studies. Relevant articles were retrieved through searching for the Cochrane Library, PubMed, Web of Science, Scope, Embase, and CNKI databases (through September 23, 2020). Ultimately, we identified 22 preclinical studies, one cell culture study, and seven clinical studies, covering a total of five Nrf2 activators. For each Nrf2 activator, we focused on its definition, potential therapeutic mechanisms, latest research progress, research limitations, and future development directions. Our systematic review provided suggestive evidence that Nrf2 activators have a potentially beneficial role in improving autism-like behaviors and abnormal molecular alterations through oxidant stress, inflammation, and mitochondrial dysfunction. These dietary phytochemicals are considered to be relatively safer and effective for ASD treatment. However, there are few clinical studies to support the Nrf2 activators as dietary phytochemicals in ASD, even though several preclinical studies. Therefore, caution should be warranted in attempting to extrapolate their effects in human studies, and better design and more rigorous research are required before they can be determined as a therapeutic option.

Natural Deep Eutectic Solvents as Agents for Improving Solubility, Stability and Delivery of Curcumin

Purpose

Study on curcumin dissolved in natural deep eutectic solvents (NADES) was aimed at exploiting their beneficial properties as drug carriers.

Methods

The concentration of dissolved curcumin in NADES was measured. Simulated gastrointestinal fluids were used to determine the concentration of curcumin and quantum chemistry computations were performed for clarifying the origin of curcumin solubility enhancement in NADES.

Results

NADES comprising choline chloride and glycerol had the highest potential for curcumin dissolution. This system was also successfully applied as an extraction medium for obtaining curcuminoids from natural sources, as well as an effective stabilizer preventing curcumin degradation from sunlight. The solubility of curcumin in simulated gastrointestinal fluids revealed that the significant increase of bioavailability takes place in the small intestinal fluid.

Conclusions

Suspension of curcumin in NADES offers beneficial properties of this new liquid drug formulation starting from excreting from natural sources, through safe storage and ending on the final administration route. Therefore, there is a possibility of using a one-step process with this medium. The performed quantum chemistry computations clearly indicated the origin of the enhanced solubility of curcumin in NADES in the presence of intestinal fluids. Direct intermolecular contacts leading to hetero-molecular pairs with choline chloride and glycerol are responsible for elevating the bulk concentration of curcumin. Choline chloride plays a dominant role in the system and the complexes formed with curcumin are the most stable among all possible homo- and hetero-molecular pairs that can be found in NADES-curcumin systems.

Demethoxycurcumin: A naturally occurring curcumin analogue for treating non-cancerous diseases

Turmeric extracts contain three primary compounds, which are commonly referred to as curcuminoids. They are curcumin, demethoxycurcumin (DMC), and bisdemethoxycurcumin. While curcumin has been the most extensively studied of the curcuminoids, it suffers from low overall oral bioavailability due to extremely low absorption as a result of low water solubility and instability at acidic pH, as well as rapid metabolism and clearance from the body. However, DMC, which lacks the methoxy group on the benzene ring of the parent structure, has much greater chemical stability at physiological pH and has been recently reported to exhibit antitumor properties. However, the treatment of noncancerous diseases with DMC has not been comprehensively reviewed. Therefore, here we evaluate published scientific literature on the therapeutic properties of DMC. The beneficial pharmacological actions of DMC include anti-inflammatory, neuroprotective, antihypertensive, antimalarial, antimicrobial, antifungal, and vasodilatory properties. In addition, DMC's ability to ameliorate the effects of free radicals and an environment characterized by oxidative stress caused by the accumulation of advanced glycation end-products associated with diabetic nephropathy, as well as DMC's capacity to inhibit the migration and proliferation of vascular smooth muscle cells following balloon angioplasty are also addressed. This review collates the available literature regarding the therapeutic possibilities of DMC in noncancerous conditions.

Preparation, Characterization, and In vitro Evaluation of Curcumin- and Resveratrol-Loaded Solid Lipid Nanoparticles

Curcumin and resveratrol are natural compounds with significant anticancer activity; however, their bioavailability is limited due to poor solubility. This study aimed to overcome the solubility problem by means of solid lipid nanoparticles (SLN). 2-Hydroxypropyl β-cyclodextrin (HPβCD) was selected from a range of polymers based on miscibility and molecular interactions. SLNs were obtained by probe sonication and freeze-drying curcumin-resveratrol with/without HPβCD incorporated in gelucire 50/13. SLNs were characterized by dynamic light scattering (DLS), zeta potential, powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and physical stability. The in vitro release of drugs from the SLNs was performed by the direct dispersion method and analyzed using a validated UV-visible method. In vitro efficacy was tested using a colorectal cancer cell line. Curcumin-resveratrol-gelucire 50/13-HPβCD (CRG-CD) and curcumin-resveratrol-gelucire 50/13(CRG) SLNs showed a particle size from 100 to 150 nm and were not in the crystalline state per PXRD results. MDSC results complimented PXRD results by the absence of melting endotherm of curcumin; TGA showed no weight loss, confirming the absence of organic solvent residual, and the shape of the SLNs was confirmed as spherical by SEM. CRG SLNs were stable for 21 days with respect to particle size and zeta potential. MTT assay indicated better IC₅₀ value for CRG as compared to CRG-CD. Hence, novel SLNs of curcumin and resveratrol incorporated in gelucire 50/13 and HPβCD were prepared and characterized to improve their bioavailability and anticancer activity.

Formulations of Curcumin Nanoparticles for Brain Diseases

Curcumin is a polyphenol that is obtained from Curcuma longa and used in various areas, such as food and textiles. Curcumin has important anti-inflammatory and antioxidant properties that allow it to be applied as treatment for several emerging pathologies. Remarkably, there are an elevated number of publications deriving from the terms "curcumin" and "curcumin brain diseases", which highlights the increasing impact of this polyphenol and the high number of study groups investigating their therapeutic actions. However, its lack of solubility in aqueous media, as well as its poor bioavailability in biological systems, represent limiting factors for its successful application. In this review article, the analysis of its chemical composition and the pivotal mechanisms for brain applications are addressed in a global manner. Furthermore, we emphasize the use of nanoparticles with curcumin and the benefits that have been reached as an example of the extensive advances in this area of health.

Curcumin-loaded self-nanomicellizing solid dispersion system: part I: development, optimization, characterization, and oral bioavailability

Curcumin (CUR) is considered as one of the most bioactive molecules ever discovered from nature due to its proven anti-inflammatory and antioxidant in both preclinical and clinical studies. Despite its proven safety and efficacy, the clinical translation of CUR into a useful therapeutic agent is still limited due to its poor oral bioavailability. To overcome its limitation and enhance oral bioavailability by improving its aqueous solubility, stability, and intestinal permeability, a novel CUR formulation (NCF) was developed using the self-nanomicellizing solid dispersion strategy. From the initial screening of polymers for their potential to improve the solubility and stability, Soluplus (SOL) was selected. The optimized NCF demonstrated over 20,000-fold improvement in aqueous solubility as a result of amorphization, hydrogen bonding interaction, and micellization determined using differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, nuclear magnetic resonance, dynamic light scattering, and transmission electron microscopy. Moreover, the greater stabilizing effect in alkaline pH and light was observed. Furthermore, significant enhancement of dissolution and permeability of CUR across everted sacs of rat small intestine were noticed. Pharmacokinetic studies demonstrated that the oral bioavailability of CUR was increased 117 and 17-fold in case of NCF and physical mixture of CUR and SOL compared to CUR suspension. These results suggest NCF identified as a promising new approach for repositioning of CUR for pharmaceutical application by enhancing the oral bioavailability of CUR. The findings herein stimulate further in vivo evaluations and clinical tests of NCF.