Solid-phase extraction of flavonoids in honey samples using carbamate-embedded triacontyl-modified silica sorbent

A stable core-shell metal-organic framework@covalent organic framework composite as solid-phase extraction adsorbent for selective enrichment and determination of flavonoids

Hydrophobization and stability is crucial for the practical application of most metal-organic frameworks (MOFs) in extraction technique. In this study, a stable core-shell MOF@COF composite (NH2-MIL-101(Fe)@TAPB-FPBA-COF) was successfully prepared by Schiff base reaction and applied to solid-phase extraction (SPE) of hydrophobic flavonoids. Notably, the TAPB-FPBA-COF shell acts as a hydrophobic "shield", which not only improves the hydrophobicity and stability of hydrophilic NH2-MIL-101(Fe), but also makes the extraction efficiency of flavonoids from MOF@COF composite significantly higher than that of pure NH2-MIL-101(Fe) and TAPB-FPBA-COF. In addition, a sensitive analytical method with excellent linearities (0.1-500 ng mL-1, R2 ≥ 0.9967), low limits of detection (0.02-0.04 ng mL-1 for water; 0.04-0.07 ng mL-1 for grape juice; 0.06-0.08 ng mL-1 for honey), good repeatability (intra-day/inter-day precision are 1.86-5.37%/1.82-7.79%, respectively) and only 5 mg of adsorbent per cartridge was established by optimizing the SPE process combined with high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV). Meanwhile, selectivity study and comparative experiments with the commercial C18 adsorbent showed that the MOF@COF adsorbent exhibited satisfactory extraction efficiency for flavonoids due to multiple interactions such as hydrogen bonding, hydrophobic, and π-π interactions. Finally, the good recoveries in grape juice (84.5-102.5%) and honey (87.5-104.6%) samples further validated the applicability of the proposed method in complex samples.

Determination of multiple mycotoxins in chili powder using cold-induced liquid-liquid extraction and Fe3O4@MWCNTs-NH2 coupled with UPLC-Q-TOF/MS

Food matrix interference is still a big challenge in analyzing multiclass mycotoxins. Herein, a novel cold-induced liquid-liquid extraction-magnetic solid phase extraction (CI-LLE-MSPE) coupled with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry (UPLC-Q-TOF/MS) method was explored for the simultaneous determination of multiple mycotoxins in chili powders. Fe₃O₄@MWCNTs-NH₂ nanomaterials were prepared and characterized, and the factors affecting the MSPE process were investigated. Based on this, the CI-LLE-MSPE-UPLC-Q-TOF/MS method was established for determining ten mycotoxins in chili powders. The proffered technique eliminated the matrix interference effectively and demonstrated strong linearity (0.5-500 µg/kg, R² ≥ 0.999), high sensitivity (limit of quantification was 0.5-1.5 µg/kg), and the recovery was 70.6%-111.7%. The extraction process is simpler than conventional methods, as the adsorbent can be separated using magnets, and reusable adsorbents are beneficial in reducing costs. In addition, the method can provide a valuable reference for pretreatment procedures for other complex matrices.

One-step fabrication of hydrophobic metal-organic framework@covalent organic framework hybrid as sorbent for high-performance solid-phase extraction of flavonoids

Metal-organic framework (MOF) and covalent organic framework (COF) exhibit excellent extraction performance in sample pretreatment, but their wider application is hindered by some inherent drawbacks. Herein, we successfully synthesized a novel MOF@COF hybrid material with large specific surface area, good chemical stability and reusability, which is suitable as a solid phase extraction (SPE) sorbent for the efficient extraction of flavonoids. Importantly, due to the synergistic effect, the obtained MOF@COF hybrid material showing a higher extraction efficiency than individual MOF and COF. This is mainly due to the obtained MOF@COF hybrid material combines the high specific surface area of MOF and multiple interactions (hydrophobic interaction, hydrogen bonding and π-π stacking interaction) with flavonoids conferred by the COF structure. Then, a sensitive analytical method for flavonoids with ideal linear range (1-500 ng mL^-1), low detection limit (0.15-0.41 ng mL^-1) and good repeatability (2.64-6.20%) was developed under optimized conditions. In addition, the MOF@COF hybrid sorbent has better selectivity for hydrophobic targets containing multiple hydrogen bond acceptors/donors. Finally, the established method was applied to the determination of flavonoids in different food samples, and satisfactory recoveries (81.4-102.1%) were obtained, which initially confirmed its applicability.

Separation of soy isoflavones from soy sauce residue by MIL-100(Fe)

Soy sauce residue (SSR) is a valuable biological resource, which contains soy isoflavones (SIs) with antioxidant activity and can be used to scavenge radicals. Herein, MIL-100(Fe) was synthesized for the extraction of SIs from SSR. Under the optimal adsorption conditions, the adsorption capacity of MIL-100(Fe) for SIs was 51.81 mg/g, which could achieve a purity of 56.17% and a recovery of 93.8%. These results demonstrated MIL-100(Fe) possessed effective properties of adsorption and purification for SIs. The content of SIs in the purified product was 167 times than that of SSR. The purified total SIs had a good antioxidant activity. The established method had a good scavenging ability toward 2, 2-diphenyl-1-picrylhydrazyl, superoxide and hydroxyl radicals, with IC₅₀ values of 0.177, 0.116 and 0.082 mg/mL, respectively. Besides, the ferrous ion chelating potency was better than others, with IC₅₀ values of 0.63 ± 0.0044 mg/mL. The established method was suitable for large-scale separation of purified total SIs and provided a reference for purification of bioactive factors from complex substrates.

Adsorption of aflatoxins and ochratoxins in edible vegetable oils with dopamine-coated magnetic multi-walled carbon nanotubes

A new, green, and cost-effective magnetic solid-phase extraction of aflatoxins and ochratoxins from edible vegetable oils samples was developed using polydopamine-coated magnetic multi-walled carbon nanotubes (PDA@Fe₃O₄-MWCNTs) as the absorbent. PDA@Fe₃O₄-MWCNTs nanomaterials were prepared by chemical co-precipitation and in situ oxidation and self-polymerization of dopamine and was characterized. Factors affecting MSPE and the adsorption behavior of the adsorbent to mycotoxins were studied, and the optimal extraction conditions of MSPE and the complexity of the adsorption process were determined. Based on this, the magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method (MSPE-HPLC-FLD) was established for determining six mycotoxins [aflatoxin B₁ (AFB₁), AFB₂, AFG₁, and AFG₂, and ochratoxin A (OTA) and OTB)] in vegetable oils. The recovery was 70.15%~89.25%, and RSD was ≤6.4%. PDA@Fe₃O₄-MWCNTs showed a high affinity toward aflatoxins and ochratoxins, allowing selective extraction and quantification of aflatoxins and ochratoxins from complex sample matrices.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.

Morphology-maintaining synthesis of copper hydroxy phosphate@metal-organic framework composite for extraction and determination of trace mercury in rice

A novel copper hydroxy phosphate@MOF composite DMP-Cu decorated by 2, 5-dimercapto-1, 3, 4-thiadiazol was facilely prepared and characterized. A dispersive SPE strategy using DMP-Cu as adsorbent combined with atomic fluorescence spectroscopy was developed for the selective capture of trace total mercury in rice sample. The adsorption mechanism showed that the Hg²⁺ removal process was fitted with pseudo second-order kinetics and the Langmuir adsorption model. The adsorbent was easy to be regenerated and the maximum adsorption capacity for the removal of Hg²⁺ was 249.5 mg g^-1 at the optimal pH of 4. X-ray photoelectron spectroscopy and Raman spectra verified the selective and strong interaction between Hg²⁺ and thiol/nitrogen-containing functional groups of DMTZ on DMP-Cu. The trace total mercury in rice samples was determined with detection limit of 0.0125 ng mL^-1 and relative standard deviation below 6%. The high recoveries were obtained in range of 98.8-109% for the spiked rice samples.

Thermoregulated extraction of luteolin under neutral conditions using oligo(ethylene glycol)-based magnetic nanoparticles with Wulff-type boronate affinity

Oligo(ethylene glycol)-based thermoresponsive polymers with Wulff-type boronate affinity were anchored on magnetic nanoparticles. The resultant magnetic nanoparticles were used as sorbents for extracting luteolin, a cis-diol-containing model analyte. By exploiting the thermoresponsive properties and Wulff-type boronate affinity of the sorbents, target adsorption at room temperature (25 °C) and target release at high temperature (40 °C) were achieved under neutral conditions without pH alteration. The proposed thermoregulated extraction method was favorable for automated boronate affinity extraction, preventing degradation of the target and avoiding acidic elution for breaking Wulff-type boronate sites. Compared to reported sorbents for extracting luteolin, the sorbents possessed higher maximum adsorption capacity (98.7 mg g^-1) with acceptable sensitivity, simplified operation procedure, and mild extraction condition. Furthermore, the sorbents were applied in thermoregulated extraction of luteolin from honey samples. Satisfactory recoveries in the range of 83.2% - 89.1% with RSD ranging from 2.2% to 4.6% were achieved. The results demonstrated that this work provided a new research direction to design and synthesize efficient thermoresponsive materials for recognition and release of cis-diol compounds under neutral conditions.

Recent Trends in the Application of Chromatographic Techniques in the Analysis of Luteolin and Its Derivatives

Luteolin is a flavonoid often found in various medicinal plants that exhibits multiple biological effects such as antioxidant, anti-inflammatory and immunomodulatory activity. Commercially available medicinal plants and their preparations containing luteolin are often used in the treatment of hypertension, inflammatory diseases, and even cancer. However, to establish the quality of such preparations, appropriate analytical methods should be used. Therefore, the present paper provides the first comprehensive review of the current analytical methods that were developed and validated for the quantitative determination of luteolin and its C- and O-derivatives including orientin, isoorientin, luteolin 7-O-glucoside and others. It provides a systematic overview of chromatographic analytical techniques including thin layer chromatography (TLC), high performance thin layer chromatography (HPTLC), liquid chromatography (LC), high performance liquid chromatography (HPLC), gas chromatography (GC) and counter-current chromatography (CCC), as well as the conditions used in the determination of luteolin and its derivatives in plant material.

Synthesis of a polymeric imidazolium-embedded octadecyl ionic liquid-grafted silica sorbent for extraction of flavonoids

In this work, a polymeric imidazolium-embedded octadecyl ionic liquid (poly(1-vinyl-3-octadecylimidazolium naphthalene sulfonate))-grafted silica (poly(C₁₈VIm⁺NapSO₃^-)@SiO₂) sorbent was prepared and applied as a solid-phase extraction (SPE) sorbent in extraction of flavonoids. The synthesized poly(C₁₈VIm⁺NapSO₃^-)@SiO₂ sorbent was characterized by X-ray photoelectron spectrogram (XPS) and fourier transform infrared spectroscopy (FT-IR). The thermodynamic and kinetic adsorption models of the prepared poly(C₁₈VIm⁺NapSO₃^-)@SiO₂ sorbent towards flavonoids were discussed by nonlinear fitting adsorption curve and the results indicated the thermodynamic adsorption model in this work was tended to be Freundlich model rather than Langmuir one and the pseudo-second order model could be used to describe the dynamic adsorption process. In addition, the adsorption amounts indicated the sorbent has satisfactory extraction capabities towards flavonoids. For investigating the influence of independent variables and their interactions on the extraction efficiency, a Box-Behnken design was used for optimizing three greatly influential parameters after performing single-factor experiments. The interaction energies between flavonoids and two ionic liquids were calculated to understand the adsorption mechanism. Under the optimal conditions, a method used for determining flavonoids was developed by combining SPE technique with high performance liquid chromatography (HPLC), and the developed method exhibited low limits of detection (0.25-0.4 μg L^-1), good linearities with correlation coefficients (R²) in the range of 0.9951-0.9996 and satisfactory recoveries ranging from 83.6% to 114.1%, which confirmed the proposed method could be successfully used to determine trace flavonoids in real samples.