Simultaneous determination of arsenic and mercury species in rice by ion-pairing reversed phase chromatography with inductively coupled plasma mass spectrometry

Low-cost signal enhanced colorimetric and SERS dual-mode paper sensor for rapid and ultrasensitive screening of mercury ions in tea

Mercury ions (Hg2+) are highly toxic heavy metals that are commonly found in natural environments. Owning to their non-biodegradability and accumulation in the food chain, the precise detection of trace amounts of Hg2+ is essential for preventing chronic accumulation and ensuring food safety. In this study, we present a dual-mode paper sensor for simultaneous colorimetric and Surface-Enhanced Raman Spectroscopy (SERS) detection of Hg2+ in tea, achieving ultrasensitive, rapid, and on-site screening. 4-Mercaptopyridine (4-MPY) was effectively chemisorbed onto the gold nanoparticles (AuNPs), acting as a signal probe for colorimetric methods. Moreover, it can produce plasmonic hot spots for SERS by interacting with the pyridine ring. To enhance the signal intensity of both colorimetry and SERS, a silver shell is in-situ grown on the surface of AuNPs captured on the paper sensor by reduction of Ag+, achieving signal amplification. The visual limit of detection (LOD) for the colorimetric biosensor is 2.5 pM, while the LOD of SERS is 0.48 pM with this dual-mode paper sensor. The sensitivity of both the colorimetric method and SERS was improved by approximately 200 and 500 times, respectively, with the designed signal amplification strategy. The system allows for multiple parallel screening of the same sample, ensuring accurate results without any false-positive or false-negative. This study provides a valuable platform for the accurate detection of various other heavy metal ions and provides effective strategies for improving the performance of colorimetric methods.

Colorimetric sensors constructed with one dimensional PtNi nanowire and Pt nanowire nanozymes for Hg2+ detection

BACKGROUND

In recent years, environmental pollution has attracted widespread global attention. Among them, environmental problems caused by heavy metal pollution pose a serious threat to human health and ecosystems. Mercury is a common heavy metal pollutant with high toxicity and wide distribution. Excessive intake of Hg2+ can cause permanent and severe damage to the nervous system, respiratory system, and kidneys in the human body. Therefore, developing both accurate and fast detection methods for Hg2+ is of great significance.

RESULTS

A sensitive Hg2+ colorimetric sensor is designed based on PtNi nanowires (NWs) and Pt NWs with peroxidase-mimetic activity. PtNi NWs and Pt NWs catalyze the reaction of 3,3', 5,5'-tetramethylbenzidine (TMB) with hydrogen peroxide (H2O2) to produce blue oxidized TMB (oxTMB). The specific interaction of Pt-Hg significantly inhibits the peroxidase-mimetic activity of PtNi NW and Pt NW nanozymes, resulting in a lighter blue color. It is worth noting that compared with specific activity (SA) of Pt NWs (3.31 U/mg), PtNi NWs own superior SA (10.43 U/mg), which inevitably leads to a wider linear range of Hg2+ analysis (1 nM-200 μM) and a lower detection limit (0.6748 nM) for PtNi NWs-based colorimetric sensor, versus linear range (4 nM-5 μM) and LOD of 1.198 nM for Pt NWs-based colorimetric sensor, which are far below the Hg2+ threshold (10 nM) for drinking water set by the US Environmental Protection Agency.

SIGNIFICANCE

The two nanozyme colorimetric sensors have been successfully used for the evaluation of Hg2+ in complex river water and tap water. Due to the advantages of simple operation, fast response, and high sensitivity, colorimetric sensors have broad application prospects in environmental monitoring.

Simple synthesis of flower-like ZnO@Pt composites for dual-mode colorimetric detecting Hg2+ with smartphone and UV-vis

BACKGROUND

Mercury is one of the most toxic heavy metal contaminants that can be harmful to human health through the food chain. Recently, the colorimetric detection of heavy metals based on nanozyme catalytic activity has received extensive interest due to the simplicity, signal visibility and suitability for in situ detection. However, the majority of these nanozymes that can be utilized for detecting mercury with high synthesis temperature and complicated synthesis methods, which limited their practical application.

RESULTS

In this work, flower-like ZnO@Pt composites were simply synthesized at room temperature, the flower-like structure and the high electron mobility of ZnO endow ZnO@Pt with stronger peroxidase-like activity. Consequently, dual-mode (UV-vis and smartphone) colorimetric sensors were designed to detect Hg2+. In UV-vis mode, the Hg2+ concentration linear range was 10-400 nM, and the limit of detection (LOD) was 0.54 nM. In smartphone mode, the Hg2+ concentration linear range was 50-1250 nM, and the LOD was 29.8 nM. A parallel analysis in 3 real water samples was confirmed by ICP-MS, the results showed good correlations (R2 > 0.98), indicating the practical reliability of these sensors.

SIGNIFICANCE

The novel flower-like ZnO@Pt composites with high stability, catalytic activity and Hg2+ response were simply synthesized at room temperature, simplifying the synthesis steps and reducing costs. The sensitivity of the developed colorimetric sensor in UV-vis mode was 3-145 times higher than that of the similar methods. The colorimetric sensor in smartphone mode broadened the detection range and improved the portability of Hg2+ detection. Thus, the dual-mode (UV-vis and smartphone) colorimetric sensors providing new detection modes for rapid monitoring of Hg2+ in environmental water.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Sensing of mercury ion using light induced aqueous leaf extract mediated green synthesized silver nanoparticles of Cestrum nocturnum L

In this study, a simple, one-pot, and eco-friendly biosynthesis of silver nanoparticles (AgNPs) was accomplished with the use of aqueous leaves extract of Cestrum nocturnum L.(AECN). Different techniques like ultraviolet-visible (UV-Vis) spectrophotometry, Fourier transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning area electron diffraction were used to investigate the optical, operational, and physical properties of the green synthesized AECN-AgNPs.The AECN-AgNPs were further used for the detection of Hg²⁺ by UV-Vis and electrochemical methods. The disintegration of the AECN-AgNPs solution caused the formation of an Ag-Hg amalgam, which caused discoloration of the solution. Sensing performance for a variety of metals such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu ²⁺, Fe³⁺, Zn²⁺, Co²⁺, Cd²⁺, Pb²⁺, As³⁺, and Mn²⁺ at 10-mM concentrations was measured in order to determine the selectivity of the sensor towards the Hg²⁺. For the electrochemical determination of 2 + Hg²⁺ , AECN-AgNPs were immobilized on a glassy carbon (GC) electrode, and the resulting modified electrode (GC/AECN-AgNPs) was characterized by cyclic voltammetry. This phenomenon is advantageously used for the sensitive determination of trace level Hg²⁺. GC/AECN-AgNPs demonstrated a linear calibration range of 100 nM to 10 μM and a limit of detection of 21 nM for Hg²⁺ determination.

Switching on-off-on colorimetric sensor based on Fe-N/S-C single-atom nanozyme for ultrasensitive and multimodal detection of Hg2

Single-atom nanozymes (SAzymes) as a new class of efficient nanozymes have attracted extensive research interest due to their high catalytic activity and specificity. However, it is challenging to develop a novel nanoenzyme with high activity, good stability and reproducibility. In this paper, the nitrogen and sulfur coordinated Fe-N/S-C SAzymes were synthesized using peanuts shells as carbon, nitrogen and sulfur source. It shows high oxidase-like activities due to the doping of S induced geometric and electronic effects, which is further confirmed by density functional theory calculations. The prepared Fe-N/S-C SAzymes with the remarkable oxidase-mimicking activity could oxidize TMB to blue oxTMB, but the GSH can inhibit the oxidation of TMB resulting in blue fading. However, when Hg²⁺ is added into above system, Hg²⁺-SH complexes are generated attributed to a high affinity between GSH and Hg²⁺, ultimately leading to blue recovery. Based on this phenomenon, we constructed a novel "on-off-on" colorimetric sensor for the simultaneous detection of GSH (off) and Hg²⁺ (on), and the signal is acquired by various modes such as naked eye, UV-Vis spectrometer and smartphone. The colorimetric detection mode based on a smartphone showed a good linear response from 10 to 80 μM for GSH with a detection limit of 3.92 μM, and for Hg²⁺ with a linear range of 1 nM-10 μM and LOD of 0.17 nM, which is more suitable for routine laboratory applications. More importantly, the proposed colorimetric sensor has been successfully applied to the detection of GSH and Hg²⁺ in real samples with good analytical performance. This work not only provides a simple and cost-effective method to detect GSH and Hg²⁺ but also makes a certain contribution to environmental protection.

An overview of the methods for analyzing the chemical forms of metals in plants

Currently, the occurrence of toxic levels of metals in soils is a serious environmental issue worldwide. Phytoremediation is getting much attention to control metals soil pollution because it is economic and environmentally friendly. However, the methods used to detect metals in plants are not uniform and have depicted poor comparability of the research investigations. Therefore, the present overview is designed to discuss the possible chemical forms of metals in various environmental matrixes and the detection methods employed to identify the chemical forms of metals in plants. Moreover, the in situ and indirect methods to detect metals in plants have also been discussed herein. In addition, the pros and cons of the available techniques have also been critically analyzed and discussed. Finally, key points/challenges and future perspectives of these methods have been highlighted for the scientific community.Novelty statementIn the current review, the possible chemical forms of metals in various environmental matrixes are discussed in detail. Various extraction agents and their efficiency for extracting metals from plants have been clearly illustrated. Further, all the available methods for analyzing the chemical forms of metals in plants have been compared.

Preparation of efficient ion-imprinted polymers for selectively removing and detecting As(iii) from the aqueous phase

Synthesis of a specific As(iii)-ion-imprinted polymer for oxidation liquid phase color detection of As(iii) ions in aqueous system.

Au nanoclusters-decorated WO3 nanorods for ultrasensitive photoelectrochemical sensing of Hg2+

Ultrasensitive photoelectrochemical sensing of Hg2+ is achieved using Au nanocluster-decorated WO3 nanorods as photoactive materials.

Magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples

This review focuses on magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples. The design and preparation of magnetic nanomaterials with specific functional groups for trace elemental analysis are summarized, along with relevant adsorption mechanism. The application of these magnetic sorbents in different operation modes for the quantification of trace elements and their species in environmental and biological samples are discussed. The trend of development in this field is also prospected.

A Simple Method for Developing a Hand-Drawn Paper-Based Sensor for Mercury; Using Green Synthesized Silver Nanoparticles and Smartphone as a Hand-Held-Device for Colorimetric Assay

Mercury ions are highly toxic at trace levels, and its pollution has posed a significant threat to the environment and public health, where current detection methods mainly require laborious operation and expensive instrumentation. Herein, a simple, cost-effective, instrument-free approach for selective detection of Hg2+ based on a hand-drawn paper-based naked-eye colorimetric device is developed. To develop a hand-drawn paper-based device, a crayon is used to build hydrophobic barriers and a paper puncher is applied to obtain patterns as a sensing zone. A green method for the synthesis of silver nanoparticles (AgNPs) is applied using Achillea Wilhelmsii (Aw) extract. The sensing ability of Aw-AgNPs toward Hg2+ is investigated in both solution-phase and paper substrate loaded with Aw-AgNPs using colorimetric methods. For the paper-based sensor, the quantification of the target relies on the visual readout of a color-changed sensing zone modified with Aw-AgNPs. Under optimal conditions, the color of Aw-AgNPs in aqueous solution and on the coated paper substrate can change from brown to colorless upon addition of target, with a detection limit of 28 × 10-9 m and 0.30 × 10-6 m, respectively. In conclusion, the present study indicates the potential of this hand-drawn eco-friendly paper-based sensor for monitoring of mercury.

Simultaneous enrichment of inorganic and organic species of lead and mercury in pg L-1 levels by solid phase extraction online combined with high performance liquid chromatography and inductively coupled plasma mass spectrometry

Quantification of ultra-trace inorganic and organic species of lead and mercury in unpolluted environmental water is crucial to estimate the mobility, toxicity and bioavailability and interactions. Simultaneous pre-concentration of Pb and Hg species in pg L^-1 levels followed by multi-elemental speciation analysis makes great sense to a large set of unstable samples because of time advantages. Herein simultaneous enrichment and speciation analysis of ultra-trace lead and mercury in water was developed by online solid-phase extraction coupled with high performance liquid chromatography and inductively coupled plasma mass spectrometry (SPE-HPLC-ICP-MS) for this aim. Pb(II), trimethyl lead (TML), triethyl lead (TEL), Hg(II), methylmercury (MeHg) and ethylmercury (EtHg) were baseline separated in 11 min under gradient elution using 5 mM l-cysteine (Cys) at pH 2.5 in the 0-1 and 4-15 min and 5 mM Cys + 0.5 mM tetrabutyl ammonium hydroxide solution at pH 2.5 in the 1-4 min. Lead and mercury species in 10 mL intact water samples were adsorbed on a 1 cm C₁₈ enrichment column pre-conditioned with 10 mL of 1 mM 2-mercaptoethanol at 10 mL min^-1, and then directly desorbed by the mobile phases. High enrichment factors (459 for Pb(II), 1248 for TML, 1627 for TEL, 2485 for Hg(II), 1984 for MeHg and 1866 for EtHg) were obtained with good relative standard deviations (<5%), leading to low LODs (0.001-0.011 ng L^-1) and LOQs (0.004-0.036 ng L^-1). Good accuracy of this method was validated by two certified reference materials of total lead in water (GBW08601) and total mercury in water (GBW08603) along with spiked recoveries (89-93%). The method was applied to analyze trace lead and mercury species in river, lake, tap and rain water, and purified and mineral water. Inorganic lead of 13-68 ng L^-1 and inorganic mercury of 21-49 ng L^-1 were measured in the nine water samples whereas TML, TEL and MeHg were not detected with 2-5 ng L^-1 EtHg presented only in one river water and tap water.

Ti (IV) modified vinyl phosphate magnetic nanoparticles for simultaneous preconcentration of multiple arsenic species from chicken samples followed by HPLC-ICP-MS analysis

Ti (IV)-modified vinyl phosphate magnetic nanoparticles (Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV)) was prepared for simultaneous extraction of multiple arsenic species, followed by high performance liquid chromatography (HPLC)- inductively coupled plasma mass spectrometry (ICP-MS) analysis. Inorganic arsenic (iAs), dimethyl arsenic acid (DMA), monomethyl arsenic acid (MMA), p-amino phenyl arsenic acid (p-ASA), 4-hdroxyphenylarsenic acid (4-OH), phenyl arsenic acid (PAA), and 3-nitro-4-hydroxyphenylarsenic acid (ROX) were investigated as interest analytes. It was found that they were quantitatively adsorbed on Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV) at pH 5, and desorbed completely with 0.1 mol/L sodium hydroxide solution. Enrichment factor of 100-fold was obtained by consuming 100 mL sample solution. Under the optimal conditions, the method combining MSPE with HPLC-ICP-MS presented a linear range of 1-5000 ng/L for seven arsenic species. The limits of detection were 0.39, 0.60, 0.23, 1.85, 0.54, 0.48, and 0.84 ng/L for DMA, MMA, p-ASA, iAs, 4-OH, PAA, ROX, with the relative standard deviations (c = 10 ng/L, n = 7) of 3.6, 3.9, 5.5, 12.4, 6.1, 5.8, 5.0, respectively. The accuracy of the method was validated by analyzing BCR 627 Tuna fish. The application potential of the method was further evaluated by chicken muscle and liver samples. No target arsenic species were detected in these samples, and good recoveries (80.6-123%) were obtained for the spiked samples at low, medium, and high concentration levels.

A dual colorimetric probe for rapid environmental monitoring of Hg2+ and As3+ using gold nanoparticles functionalized with d-penicillamine

A highly sensitive and selective colorimetric assay for the dual detection of Hg2+ and As3+ using gold nanoparticles (AuNPs) conjugated with d-penicillamine (DPL) was developed. When Hg2+ and As3+ ions coordinate with AuNP-bound DPLs, the interparticle distance decreases, inducing aggregation; this results in a significant color change from wine red to dark midnight blue. The Hg4f and As3d signals in the X-ray photoelectron spectra of Hg2+ (As3+)-DPL-AuNPs presented binding energies indicative of Hg2+-N(O) and As3+-N(O) bonds, and the molecular fragment observed in time-of-flight secondary ion mass spectra confirmed that Hg2+ and As3+ coordinated with two oxygen and two nitrogen atoms in DPL. The detection of Hg2+ and As3+ can be accomplished by observing the color change with the naked eye or by photometric methods, and this was optimized to provide optimal probe sensitivity. The assay method can be applied for environmental monitoring by first selectively quantifying Hg2+ in water samples at pH 6, then estimating the As3+ concentration at pH 4.5. The efficiency of the DPL-AuNP probe was evaluated for the sequential quantification of Hg2+ and As3+ in tap, pond, waste, and river water samples, and absorbance ratios (A 730/A 525) were correlated with Hg2+ and As3+ concentrations in the linear range of 0-1.4 μM. The limits of detection in water samples were found to be 0.5 and 0.7 nM for Hg2+ and As3+, respectively. This novel probe can be utilized for the dual determination of Hg2+ and As3+, even in the presence of interfering substances in environmental samples.

Development of luminol-based chemiluminescence approach for ultrasensitive sensing of Hg(II) using povidone-I2 protected gold nanoparticles as an efficient coreactant

In this work, we fabricated gold nanoparticles (AuNPs) capped with both polyvinyl pyrrolidone (PVP) and iodine (I₂) to act as efficient chemiluminescent coreactants for luminol. AuNPs synthesis was based on the direct chemical reduction of Au³⁺ with NaBH₄ in the presence of PVP-I₂ complex. The successful synthesis of PVP-I₂@AuNPs was confirmed with scanning electron microscopy (SEM) and UV-vis spectrophotometry. Chemiluminescence (CL) intensity of luminol was greatly enhanced, upon its chemical reaction with chemisorbed I₂ on AuNPs surfaces owing to the excellent catalytic activity of AuNPs. The PVP-I₂@AuNPs/luminol CL sensing system was successfully applied for determination of Hg²⁺ ions and the results displayed linearity in a wide range from 0.5 to 2000 nM and an ultrasensitive response to 1.0 nM Hg²⁺. The detection limit of Hg²⁺ ions was 0.1 nM, which was 100 times lower than the limit value (10 nM) defined by the U.S. Environmental Protection Agency in drinkable water. This ultrasensitive luminogenic system for Hg²⁺ detection also exhibited excellent selectivity among 13 types of metals, suggesting that the luminol/PVP-I₂@AuNPs system is a promising sensor for real-time detection of Hg²⁺. Graphical abstract.

Raman reporter-assisted Au nanorod arrays SERS nanoprobe for ultrasensitive detection of mercuric ion (Hg2+) with superior anti-interference performances

Ultra sensitive detection of mercuric ion (Hg²⁺) with superior anti-interference capability from natural water is of great significance for food safety, environmental protection, and human health. We herein develop Au ordered nanorod arrays (Au NRAs) as surface-enhanced Raman scattering (SERS) substrates to construct SERS-active and signal-reproducible sensing platforms modified with 4-mercaptophenylboronic acid (4-MBA) as multifunctional SERS reporters. The aqueous Hg²⁺ can be efficiently trapped by 4-MBA through electrophilic substitution reactions and precisely appraise its concentration based on the collective spectral changes of reporters including peak disappearance, emergence, and Raman shift. Based on this, the optical nanoprobe shows an ultrahigh detection sensitivity of 0.1 nM for Hg²⁺, which is two orders of magnitude lower than the U.S.A. environmental protection agency (EPA)-required maximum level of drinkable water. It also offers both an exceptional Hg²⁺ discrimination against other metal ions as well as organic ligands and perfect feasibilities of detecting solutions with ultra-wide pH ranges from 1.0-14.0 at varying temperatures. Moreover, the nanoprobe demonstrates an ability to identify different chemical forms of mercury and has a high repeatability, accuracy and reliability to meet the practical detection requirements in natural environments.

Nanozyme-based sensing platforms for detection of toxic mercury ions: An alternative approach to conventional methods

Mercury (Hg) is known as a poisonous heavy metal which stimulates a wide range of adverse effects on the human health. Therefore, development of some feasible, practical and highly sensitive platforms would be desirable in determination of Hg²⁺ level as low as nmol L^-1 or pmol L^-1. Different approaches such as ICP-MS, AAS/AES, and nanomaterial-based nanobiosensors have been manipulated for determination of Hg²⁺ level. However, these approaches suffer from expensive instruments and complicated sample preparation. Recently, nanozymes have been assembled to address some disadvantages of conventional methods in the detection of Hg²⁺. Along with the outstanding progress in nanotechnology and computational approaches, pronounced improvement has been attained in the field of nanozymes, recently. To accentuate these progresses, this review presents an overview on the different reports of Hg²⁺-induced toxicity on the different tissues followed by various conventional approaches validated for the determination of Hg²⁺ level. Afterwards, different types of nanozymes like AuNPs, PtNPs for quantitative detection of Hg²⁺ were surveyed. Finally, the current challenges and the future directions were explored to alleviate the limitation of nanozyme-based platforms with potential engineering in detection of heavy metals, namely Hg²⁺. The current overview can provide outstanding information to develop nano-based platforms for improvement of LOD and LOQ of analytical methods in sensitive detection of Hg²⁺ and other heavy metals.

Speciation Analysis of Trace Arsenic, Mercury, Selenium and Antimony in Environmental and Biological Samples Based on Hyphenated Techniques

In order to obtain a well understanding of the toxicity and ecological effects of trace elements in the environment, it is necessary to determine not only the total amount, but also their existing species. Speciation analysis has become increasingly important in making risk assessments of toxic elements since the toxicity and bioavailability strongly depend on their chemical forms. Effective separation of different species in combination with highly sensitive detectors to quantify these particular species is indispensable to meet this requirement. In this paper, we present the recent progresses on the speciation analysis of trace arsenic, mercury, selenium and antimony in environmental and biological samples with an emphasis on the separation and detection techniques, especially the recent applications of high performance liquid chromatography (HPLC) hyphenated to atomic spectrometry or mass spectrometry.

Occurrence, toxicity, and speciation analysis of arsenic in edible mushrooms

Owing to the strong concentration and biotransformation of arsenic, the influence of some edible mushrooms on human health has attracted widespread attention. The toxicity of arsenic greatly depends on its species, so the speciation analysis of arsenic is of critical importance. The aim of the present review is to highlight recent advances in arsenic speciation analysis in edible mushrooms. We summarized the contents and distribution of arsenic species in some edible mushrooms, the methods of sample preparation, and the techniques for their identification and quantification. Stability of the arsenic species during sample pretreatment and storage is also briefly discussed.

Enzyme-assisted extraction and liquid chromatography-inductively coupled plasma mass spectrometry for the determination of arsenic species in fish

A sensitive, simple and rapid method for the simultaneous determination of eleven arsenic species has been developed. A high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) technique was used for the analysis of eleven arsenic species in less than 17 min. Different extraction solutions were explored and the recovery results using water and aqueous acidic solvents, aqueous organic solvents and enzymes showed that 40 mg protease with 0.75 mL 0.5% hydrochloric acid (v/v) as the extraction agent gave the best experimental results. Species separation with ammonium carbonate solution as the mobile phase was conducted on an anion-exchange chromatographic column using gradient elution. The column temperature was 20 °C and kinetic energy discrimination (KED) was employed to eliminate spectral interference. The use of KED mode effectively removed interference from ⁷⁵ArCl. The detection limit (L_D) of the method was in the range of 0.11-0.59 μg kg^-1. Repeatability values obtained for spiked real fish samples were in the range of 1.1%-7.6%. Accuracy was calculated based on the analysis of spiked real fish samples at five concentration levels. Obtained recoveries were 91%-106%. The validated method was used in a pilot study to analyze real samples of fish, the organic arsenic especially AsB was the major arsenic specie present in the analyzed samples, only trace amount of inorganic arsenic were detected. The analytical method should improve the assessment of human exposure associated with arsenic intake from fish.

AuNS@Ag core-shell nanocubes grafted with rhodamine for concurrent metal-enhanced fluorescence and surfaced enhanced Raman determination of mercury ions

Mercury ion (Hg²⁺) is a highly hazardous and widespread pollutant with bio-accumulative properties. Although the existing Hg²⁺ detection methods have high sensitivity and reliability, whereas there have few reports concerning bimodal detection for Hg²⁺ with one sensor. Toward this goal, a novel sensor based on rhodamine derivatives (RhD) grafted AuNS@Ag core-shell nanocubes (CSN) has been synthesized and shown the bimodal detection capabilities with metal enhanced fluorescence (MEF) and surface enhanced Raman scattering (SERS) for Hg²⁺. Herein, resultant CSN acts as the signal enhancing material; RhD was modified on the outside of the shell to ensure the signal sensitive of the CSN-RhD hybrids. In this work, we investigate the size- and shape-dependent SERS activity of plasmonic CSN comprised of AuNS as cores and Ag cuboids as shells. The SERS activity of CSN with spherical core was found to increase with the increasing thickness of the Ag cubic shell. Sequel, under an optimized condition, a display of strong MEF and SERS signals of the resulting mixtures with increasing of Hg²⁺ concentrations was observed. The proposed bimodal sensor showed excellent performances for Hg²⁺ along with wide linear range of 0.001-1000 ppm and 0.01-1000 ppm as well as the relatively low detection limit of 0.94 and 5.16 ppb for MEF and SERS assays, respectively. Furthermore, the ability of the sensor to detect Hg²⁺was also confirmed in adulterated milk samples.

A Review on Recent Applications of High-Performance Liquid Chromatography in Metal Determination and Speciation Analysis

High-performance liquid chromatography (HPLC) has several advantages over the conventional methods due to their operational simplicity. It is a vital tool to determine metal ions having same mass but different electronic configuration, to separate complex mixtures and to resolve ions that may be indistinguishable by mass spectrometry alone. Metal ions play vital role in many biological processes and involved in setting up of many diseases. Therefore, the development of simple methods for the detection and quantification of metals in real samples might serve as diagnostic tools for various diseases. This review article focuses on the recent main feature of this technique, i.e. speciation of metal ions and their applications to series of problem of metal ion chemistry in different environmental matrixes. Speciation of metals is of increasing interest and has a great importance because of bioavailability, environmental mobility, toxicity and potential risk of metals. With the capability of partitioning the complex species of different metal ions, HPLC is an efficient technique for this task. This review summarizes recent advances in the development of HPLC to the fundamental understanding of metal ion chemistry in the environment and discusses all the issues that still need a lot of consideration. It has been classified into different sections depending on the role of HPLC in separation used and metal speciation; furthermore, the underlying sample preconcentration techniques and detection systems involved for the determination of metal ions and their applications were discussed.

A modified fluorescein derivative with improved water-solubility for turn-on fluorescent determination of Hg2+ in aqueous and living cells

To improve the water-solubility of heavy-metal sensing materials, a modified fluorescein-based derivative, acryloyl fluorescein hydrazine (ACFH), was designed and developed by incorporating a non-hydrogen-bonding group into the conjugated molecule for weakening intermolecular hydrogen-bonding interactions. In neutral water environments, ACFH presented a fluorescence-enhancement performance at λ_max=512nm in the presence of Hg²⁺, which could be visualized by naked-eyes. Under the optimized conditions, the linear range of Hg²⁺ detection was 1.0-100×10^-9molL^-1 with a correlation coefficient of 0.9992 and a detection limit of 0.86×10^-9molL^-1. The recognition mechanism was confirmed to be a stable and irreversible 1:1 five-member ring complex between ACFH and Hg²⁺ with a coordination constant of 3.36×10⁹. ACFH would possess a potential application in detecting Hg²⁺ for biological assay with low cytotoxicity.