Encapsulation of tea tree oil by amorphous beta-cyclodextrin powder

Efficient encapsulation of Hinoki essential oil with β-cyclodextrin using an ultrasound-aided co-precipitation technique for dual anti-Listeria monocytogenes and anti-Staphylococcus aureus activities

Listeria monocytogenes (L. monocytogenes) and Staphylococcus aureus (S. aureus) are widely acknowledged as two of the most dangerous foodborne pathogens. Nevertheless, reports on the development of non-toxic food preservatives that specifically target these two bacterial strains are scarce. Here, we present an inclusion complex (IC) of Hinoki essential oil with β-cyclodextrin, which exhibited dual anti-L. monocytogenes and anti-S. aureus activities. For the first time, an innovative ultrasound-aided co-precipitation technique was utilized for the preparation of IC. Compared with the traditional co-precipitation method, this new technique demonstrated superior encapsulation and time efficiencies, making it well-suited for large-scale production. X-ray diffraction and scanning electron microscopy analyses revealed a transition in the morphological and crystal structures after formation of the IC. Fourier transform infrared spectroscopy and Raman spectroscopy analyses indicated that Hinoki essential oil was effectively encapsulated by β-cyclodextrin. The differential scanning calorimetry and thermogravimetric thermograms indicated that the formed IC was more thermally stable than the free Hinoki essential oil. Importantly, 100 % antibacterial ratios for both L. monocytogenes and S. aureus were determined, indicating that the IC prepared in this study is a promising food preservative.

Extraction of cellulose nanocrystalline from Camellia oleifera Abel waste shell: Study of critical processes, properties and enhanced emulsion performance

Cellulose nanocrystals (CNCs) extracted from the waste shell of Camellia oleifera Abel (C. oleifera) are gaining attention as valuable materials. In this study, CNCs were extracted from the agricultural waste shell of C. oleifera through phosphoric acid and sulfuric acid hydrolysis, respectively. Firstly, we optimized the alkaline treatment process for cellulose isolation by using response surface methodology. Furthermore, the properties of CNCs were investigated by neutralizing them with NaOH and NH3·H2O, and by dialysis in water. In addition, the characterization methods including FT-IR, TGA, AFM and TEM were used to analysis the properties of the synthesized CNCs. Finally, CNCs were studied for their application in essential oil-based Pickering emulsions. CNCs obtained from sulfuric acid showed the smallest particle size and good dispersibility. Moreover, the release profiles of essential oils in the emulsions were followed by Peppa's kinetic release model. The antibacterial activity of the emulsions against E. coli and S. aureus showed that CNCs-stabilized emulsions enhanced the antibacterial activity of essential oils. Therefore, neutralization treatments may enhance the properties of CNCs, and CNCs stabilized Pickering emulsions can enhance antibacterial activity of essential oil. This study provides insight into the potential application of CNCs derived from C. oleifera waste shells.

Oil structuring from porous starch to powdered oil: Role of multi-scale structure in the oil adsorption and distribution

Oil structuring from porous starch is a potential alternative for the industrial production of powdered oil, but their relationship between starch multi-scale structure and oil adsorption characteristics was not clear. This study compared the role of multi-scale structure of porous starch (PS) prepared by normal and waxy maize starch in the oil adsorption. Waxy maize porous starch exhibited higher oil adsorption capacity (32.43 %-98.71 %) and more oil distributed on the surface of granules than normal maize porous starch, resulting from the more pores, larger specific surface area (1.01-1.53 m2/g), and pore size (8.45-9.32 nm). The enzymolysis time of native starch dominated oil distribution, leading to different granule adhesion and aggregation state. Pearson correlation analysis further showed oil adsorption capacity was negatively correlated with particle size, but positively correlated with enzymolysis rate and specific surface area of PS. The formation of powdered oil was mainly through the physical adsorption, including surface adsorption and pore adsorption. These findings could provide a promising route for the preparation of powdered oil with controlled multi-scale structure of PS.

Fabrication and Characterization of β-Cyclodextrin/Mosla Chinensis Essential Oil Inclusion Complexes: Experimental Design and Molecular Modeling

Essential oils (EOs) are primarily isolated from medicinal plants and possess various biological properties. However, their low water solubility and volatility substantially limit their application potential. Therefore, the aim of the current study was to improve the solubility and stability of the Mosla Chinensis (M. Chinensis) EO by forming an inclusion complex (IC) with β-cyclodextrin (β-CD). Furthermore, the IC formation process was investigated using experimental techniques and molecular modeling. The major components of M. Chinensis 'Jiangxiangru' EOs were carvacrol, thymol, o-cymene, and terpinene, and its IC with β-CD were prepared using the ultrasonication method. Multivariable optimization was studied using a Plackett-Burman design (step 1, identifying key parameters) followed by a central composite design for optimization of the parameters (step 2, optimizing the key parameters). SEM, FT-IR, TGA, and dissolution experiments were performed to analyze the physicochemical properties of the ICs. In addition, the interaction between EO and β-CD was further investigated using phase solubility, molecular docking, and molecular simulation studies. The results showed that the optimal encapsulation efficiency and loading capacity of EO in the ICs were 86.17% and 8.92%, respectively. Results of physicochemical properties were different after being encapsulated, indicating that the ICs had been successfully fabricated. Additionally, molecular docking and dynamics simulation showed that β-CD could encapsulate the EO component (carvacrol) via noncovalent interactions. In conclusion, a comprehensive methodology was developed for determining key parameters under multivariate conditions by utilizing two-step optimization experiments to obtain ICs of EO with β-CD. Furthermore, molecular modeling was used to study the mechanisms involved in molecular inclusion complexation.

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Preparation and characterization of long-term antibacterial and pH-responsive Polylactic acid/Octenyl succinic anhydride-chitosan @ tea tree oil microcapsules

Encapsulation technology can increase the stability and maintain the volatile active substances of plant essential oils. In the present study, tree essential oil (TTO) was encapsulated with polylactic acid (PLA) modified by octenyl succinic anhydride chitosan (OSA-CS) as shell materials to form long-term antibacterial and pH-responsive microcapsules. The PLA/OSA-CS@TTO microcapsules were characterized by high performance liquid chromatography (HPLC), scanning electron microscopy (SEM) and antibacterial performance testing. The results showed that the average particle size of microcapsules was 10 μm, and the encapsulation efficiency and drug loading efficiency of TTO reached 81.5 % and 60.3 %. After 4800 min of release in media at different pH (5 and 7) still sequestered 55.32 % and 56.74 % of TTO which approved the shell of microcapsules responded to different pH values. The microcapsules remained stable for 80 days after drying, and preserving 39.7 % of the core material. The morphology of PLA/OSA-CS@TTO microcapsules revealed that the PLA/OSA-CS@TTO microcapsules presented smooth and firm structure. Antibacterial test for staphylococcus aureus of those microcapsules implied that the bacteriostatic rate reached 100 % after 72 h. Bio-based macromolecular modification strategies can provide inspiration for the development of green microcapsules.

Impact of different processing techniques on the key volatile profile, sensory, and consumer acceptance of black truffle (Tuber melanosporum Vittadini)

Fresh truffles which include black truffle (Tuber melanosporum Vittadini) deteriorate and lose aroma rapidly after harvest; therefore, postharvest processing via freeze-drying or encapsulation is an option to preserve truffle aroma for extended supply. However, the aroma profile that directly affects the truffle quality and consumer acceptance is influenced by processing and producers require processing options that balance processing feasibility with retention of a suitable aroma profile. This study aimed to determine the impact of freeze-drying and encapsulation on the profile of key volatiles, consumer discrimination, and overall sensory impression (aroma intensity, liking, and acceptability) of processed truffle products compared to the starting material (positive control). The study combined experimental-scale processing with GC-MS analysis and consumer sensory evaluation to compare and optimize postharvest processing options. Based on the results, some volatile changes were detected in the processed truffle products compared to the positive control which were aligned with the consumer discrimination (triangle test) and the aroma intensity score (consumer sensory test). Despite some chemical and sensory differences detected, the consumer panel did not have any preference for processed truffle products compared to the positive control. The overall finding indicates the potential value of processing truffles into a natural flavoring ingredient for food application via freeze-drying or encapsulation, which should be of great interest for the truffle and food industry. According to the correlation analysis, the consumer acceptance of a truffle product may be increased by retaining 1-octen-3-ol and methional, while reducing the amount of p-cresol in the product. PRACTICAL APPLICATION: The postharvest process of turning truffles into a food flavoring ingredient may cause undesirable volatile changes that would directly impact the aroma quality and consumer acceptance of the processed truffle products. Hence, the impacts of freeze-drying and encapsulation on the chemical and sensory profile of truffles were evaluated in this study. Overall, the results of the concurrent instrument and sensory analysis demonstrated that both freeze-drying and encapsulation are potential options for processing.

Preparation, Optimization, and Characterization of Inclusion Complexes of Cinnamomum longepaniculatum Essential Oil in β-Cyclodextrin

Cinnamomum longepaniculatum essential oil (CLEO) possesses antibacterial, anti-inflammatory, and antioxidant activities. However, CLEO shows volatilization and poor solubility, which limits its application field. In this research, inclusion complexes of β-cyclodextrin (β-CD) with CLEO were produced, and its physicochemical properties were characterized. Response surface methodology was used to obtain optimum preparation conditions. A statistical model was generated to define the interactions among the selected variables. Results show that the optimal conditions were an H2O/β-CD ratio of 9.6:1 and a β-CD/CLEO ratio of 8:1, with the stirring temperature of 20 °C for the maximal encapsulation efficiency values. The physicochemical properties of CLEO/β-CD inclusion complexes (CLEO/β-CD-IC) were investigated. Fourier transform infrared spectroscopy showed that correlative characteristic bands of CLEO disappeared in the inclusion complex. X-ray diffraction presented different sharp peaks at the diffraction angle of CLEO/β-CD-IC. The thermogravimetric analysis demonstrated the thermal stability of CLEO was enhanced after encapsulation. Tiny aggregates with a smaller size of CLEO/β-CD-IC particles were observed by scanning electron microscopy. The comparison of β-CD, CLEO, and physical mixtures with CLEO/β-CD-IC confirmed the formation of inclusion complexes.

Comparative evaluation of encapsulation using β-cyclodextrin versus freeze-drying for better retention and stabilizing of black Périgord truffle (Tuber melanosporum) aroma

This study aimed to develop a novel technique to retain and stabilize compounds contributing to truffle aroma by encapsulation using β-cyclodextrin. Two experiments were conducted. In the first experiment, the key volatile profile and microbial population of products resulting from three different encapsulation methods, namely direct mixing method (M1), direct mixing followed by ethanol addition method (M2), and paste method (M3), were compared with untreated truffles (positive control) over a 90-day period. The M2-derived product was the least optimal for retaining key volatile compounds despite showing the lowest microbial population. There was no significant difference in the volatile profile of products derived from M1 and M3 on day 0. However, it was observed that the M3-derived product could retain its volatile profile better than the M1-derived product by day 90. M3 was compared with freeze-drying in the second experiment. Freeze-dried truffles showed an overall higher relative percentage of volatiles than the M3-derived product on day 0. However, by day 90, some volatile changes occurred in the freeze-dried truffles but not in the M3-derived product. The findings indicate that while freeze-drying could adequately conserve truffle volatiles, the encapsulation of volatile compounds in β-cyclodextrin could improve the volatile stability of truffle products and allow for longer storage times. Microbes were found in all encapsulated truffle products and freeze-dried truffles on days 0 and 90, suggesting the need to explore the possibility of incorporating a decontamination step in the process prior to either encapsulation or freeze-drying. PRACTICAL APPLICATION: A technique to capture and stabilize compounds responsible for truffle aroma by encapsulation using β-cyclodextrin was developed and compared with freeze-drying in this study. The overall finding suggests that while freeze-drying of truffle could sufficiently preserve volatiles, encapsulating truffle volatiles with β-cyclodextrin may improve its stability, extending its shelf life, which can be applied in the development of a natural truffle ingredient that can be applied in food product development.

Thermal, structural, antimicrobial, and physicochemical characterisation of thyme essential oil encapsulated in β- and γ-cyclodextrin

The present work aimed to encapsulate the thyme essential oil (TEO) in β-cyclodextrin (BCD) and γ-cyclodextrin (GCD) complexes in two selected cyclodextrin (CD) to TEO ratios (85/15 and 80/20 w/w) and compare the physicochemical, antioxidant, and antimicrobial properties of the encapsulated powders. The inclusion complexes between CD and TEO were prepared by blending aqueous CD and TEO in ethanol followed by freeze-drying. The powder properties were assessed by measuring particle size and microstructure using SEM, FTIR, and XRD. The median values of the particle sizes (GCD: 92.0 ± 4.69 and BCD: 46.2 ± 2.56-mm) significantly influenced the encapsulation efficiency, resulting in a higher encapsulation efficiency of the GCD (92.02 ± 10.79%) than that of the BCD (56.30 ± 12.19%). The encapsulated GCD/TEO (80/20) showed higher antioxidant activity and an antimicrobial inhibitory effect against Listeria monocytogenes and Salmonella enterica sv. typhimurium. Overall, the GCD acts as a superior wall material to the BCD in the TEO encapsulation.

Fibrous palygorskite clays as versatile nanocarriers for skin delivery of tea tree oils in efficient acne therapy

This paper presents a facile approach to develop palygorskite (Pal), a fibrous clay mineral, as a delivery system of tea tree oil (TTO) for topical acne therapy. The obtained TTO-Pal composite showed an efficient loading of TTO (27.4%) with a selective accumulation of terpine-4-ol and 1,8-cineole (two major antimicrobial TTO constituents), sustained release of TTO at skin physiological conditions (pH5.4, 32 °C) and superior skin sebum (2.2 g/g) absorbability. In vitro toxicological assessments showed that the Pal incorporation strategy significantly reduced the acute contact toxicity of TTO. The antimicrobial results revealed a preferable bacteriostatic effect for the TTO-Pal system towards opportunistic dermal pathogens (Escherichia coli, Staphylococcus aureus and Propionibacterium acnes) over the beneficial bacterium (Staphylococcus epidermis). Moreover, TTO-Pal based formulations exhibited pronounced clinical therapeutic efficacy in treating facial acne by rapidly reducing inflamed lesions, modulating skin sebum overproduction and restoring barrier function. This is the first report of using fibrous clay as a biocompatible nanocarrier system for topical delivery of essential oils in efficient management of facial acne with both in vitro and in vivo evidences, which may open perspectives for fibrous clay-drug delivery system in topical application and expand the high added value development of this mineral resource in the advanced healthcare fields.

Functional Coatings by Natural and Synthetic Agents for Insect Control and Their Applications

Insect repellent textiles offer protection against disease-causing vectors such as mosquitoes, flies, and ticks. Protection is based on the incorporation of insect repellent compounds present in plant oil derivatives or synthetic oils. The effectiveness and application of natural insect repellents such as citronella grass, lemongrass, rosemary, peppermint, holy basil, tea tree, neem, lavender, thyme, lemon eucalyptus, clove, and cinnamon oils, as well as synthetic compounds permethrin, allethrin, malathion, DEET, DETA, IR3535, and picaridin, are compared here. The insect repellent and insecticidal effectiveness of natural compounds in their pure form are very low due to their high volatility. The effectiveness has been greatly improved through slow-release systems such as encapsulation of the essential oils and is comparable to synthetic compounds used for insect control purposes. Due to the lasting toxicity of synthetic compounds to humans and the environment, the use of natural compounds should become a more preferred method of insect control.

Methods used for extraction of plant volatiles have potential to preserve truffle aroma: A review

Truffles are considered one of the world's most highly prized foods mainly due to their desirable organoleptic properties and rarity. However, truffles are seasonal (harvested mostly in winter from June to August in the Southern Hemisphere and from December to February in the Northern Hemisphere) and extremely perishable. Truffles deteriorate rapidly showing undesirable changes within 10 days from harvest in aroma and visual appearance after harvest. The very short postharvest shelf life (about 7-10 days) limits the potential for export and domestic consumption all year round. Several preservation methods have been studied to prolong their shelf life without the loss of aroma. However, all traditional preservation techniques have their own shortcomings and remain challenging. The extraction of natural truffle aroma volatiles for food applications could be a potential alternative to replace the existing synthetic flavoring used for processed truffle products. Four commonly used extraction methods for recovering volatile compounds from plants, namely, supercritical carbon dioxide extraction, Soxhlet extraction, distillation, and cold pressing, are critically analyzed. Up to date, existing research about the extraction of aroma volatiles from truffles is limited in the literature but based on the volatility of the key truffle volatile compounds, supercritical carbon dioxide extraction may offer the best possibility so that a natural truffle-based product that can be used in food applications throughout the year can be made available.

Development of Inclusion Complexes With Relative Humidity Responsive Capacity as Novel Antifungal Agents for Active Food Packaging

Background: Allyl isothiocyanate is an excellent antimicrobial compound that has been applied in the development of active food packaging materials in the last years. However, the high volatility of this compound could prevent a lasting effect over time. In order to avoid this problem, cyclodextrin inclusion complexes have been proposed as an alternative, being beta-cyclodextrin (β-CD) as the main candidate. In addition, β-CD could act as a relative humidity-responsive nanoparticle. In this regard, the aim of this study was to develop inclusion complexes based on β-CD and AITC as relative humidity-responsive agents, which can be used in the design of active food packaging materials. Methods: Two different β-CD:AITC inclusion complexes (2:1 and 1:1 molar ratios) were obtained by the co-precipitation method. Entrapment efficiency was determined by gas chromatography, while inclusion complexes were characterized through thermal, structural, and physicochemical techniques. Antifungal capacity of inclusion complexes was determined in a headspace system. Furthermore, the AITC release from inclusion complexes to headspace at different percentages of relative humidity was evaluated by gas chromatography, and this behavior was related with molecular dynamic studies. Key Findings and Conclusions: The entrapment efficiency of inclusion complexes was over to 60%. Two coexisting structures were proposed for inclusion complexes through spectroscopic analyses and molecular dynamic simulation. The water sorption capacity of inclusion complexes depended on relative humidity, and they exhibited a strong fungicide activity against Botrytis cinerea. Furthermore, the AITC release to headspace occurred in three stages, which were related with changes in β-CD conformational structure by water sorption and the presence of the different coexisting structures. In addition, a strong influence of relative humidity on AITC release was evidenced. These findings demonstrate that β-CD:AITC inclusion complexes could be used as potential antifungal agents for the design of food packaging materials, whose activity would be able to respond to relative humidity changes.

Citrus Peel Extracts for Industrial-Scale Production of Bio-Based Active Food Packaging

The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with β-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20–25%. In addition, all samples showed good antimicrobial activity (MIC 5–0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5–1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm² of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

A New Approach for β-Cyclodextrin Conjugated Drug Delivery System in Cancer Therapy

Natural cyclodextrins (CDs) are macrocyclic starch molecules discovered a decade ago, in which α-, β-, and γ-CD were commonly used. They originally acted as pharmaceutical excipients to enhance the aqueous solubility and alter the physicochemical properties of drugs that fall under class II and IV categories according to the Biopharmaceutics Classification System (BPS). The industrial significance of CDs became apparent during the 1970s as scientists started to discover more of CD's potential in chemical modifications and the formation of inclusion complexes. CDs can help in masking and prolonging the half-life of drugs used in cancer. Multiple optimization techniques were discovered to prepare the derivatives of CDs and increase their complexation and drug delivery efficiency. In recent years, due to the advancement of nanotechnology in pharmaceutical sectors, there has been growing interest in CDs. This review mainly focuses on the formulation of cyclodextrin conjugated nanocarriers using graphenes, carbon nanotubes, nanosponges, hydrogels, dendrimers, and polymers to achieve drug-release characteristics specific to cells. These approaches benefit the discovery of novel anti-cancer treatments, solubilization of new drug compounds, and cell specific drug delivery properties. Due to these unique properties of CDs, they are essential in achieving and enhancing tumor-specific cancer treatment.

Encapsulation of Basil Essential Oil by Paste Method and Combined Application with Mechanical Trap for Oriental Fruit Fly Control

Simple Summary

Essential oils of the Ocimum spp. comprised of the volatile phenylpropanoids known for the Oriental fruit fly attractant property. However, fully exposing the essential oils in the field limited their ability. Therefore, we proposed a cheap yet effective paste encapsulation technique combined with a plastic trap for controlling tropical fruit fly in tropical fruit orchard.

Abstract

In this work, the chemical compositions of basils oils, including those of lemon basil, white holy basil, Thai basil, tree basil and red holy basil, were analysed. Methyl eugenol was detected in all types of basils. The essential oils of red and white holy basils possessed a comparable ability (~25%) to attract male Oriental fruit fly to the synthesised fruit fly attractant in the laboratory experiment. To control the release of the active ingredients, the white holly basil oil (WBO) was encapsulated with maltodextrin (MD) and gum arabic (GA) by paste method. The essential oil is retained in the wall complex much longer with the addition of MD. The results also revealed that the combination of the MD:GA (25:75) had the highest loading efficiency of the oil (9.40%) as observed by the numerous porous structures by scanning electron microscopy. Fourier-transform infrared spectra of the encapsulated polymer confirmed traces of essential oil functional groups. The field test study advised that WBO-encapsulated products improved fruit fly attractive efficiency by maintaining the release rate of basil essential oil.

Characterization of tea tree essential oil and large-ring cyclodextrins (CD9 -CD22 ) inclusion complex and evaluation of its thermal stability and volatility

BACKGROUND

Although the structure and physicochemical properties of large ring cyclodextrins (LR-CDs) exhibit unique characteristics, and also possess very strong water solubility and high safety, little is known about the embedding performance of macrocyclodextrin. Encapsulation refers to a complex of tea tree oil (TTO) with the wall material, protecting the core material or changing its properties from adverse external factors, controlling its release rate against the evaporation and degradation of essential oils. In the present study, LR-CDs complexed with TTO were prepared by co-precipitation methods.

RESULTS

The mass ratio of LR-CDs-TTO was six and the maximum complexation efficiency was 86.23%. Fourier-transform infrared spectroscopy analysis presented the loss of characteristic peaks related to TTO in the complex and no other additional peaks were observed. X-ray diffraction examination demonstrated several sharp peaks and intensity peaks at the diffraction angle of the TTO-LR-CDs complex. ¹ H-NMR indicated a chemical shift as a result of the interaction between the molecules in the inclusion complex. Moreover, the thermal stability and aqueous solubility of TTO were enhanced after synergy with LR-CDs; particularly, the solubility of the complex was increased by 329-fold. The volatile characteristics of the encapsulated and original TTO were identical.

CONCLUSION

The results of the present study show that TTO was efficaciously complexed with LR-CDs and exhibited enhanced solubility and thermal stability. © 2020 Society of Chemical Industry.

Nanoemulsion of Minthostachys verticillata essential oil. In-vitro evaluation of its antibacterial activity

Infectious diseases constitute a problem of great importance for animal and human health, as well as the increasing bacterial resistance to antibiotics. In this context, medicinal plants emerge as an effective alternative to replace the use antibiotics. The essential oil (EO) of Minthostachys verticillata (Griseb.) Epling (Lamiaceae) has demonstrated a strong antimicrobial activity. However, its instability and hydrophobicity under normal storage conditions are limitations to its use. Nanoemulsion technology is an excellent way to solubilize, microencapsulate, and protect this compound. This study aimed to obtain a nanoemulsion based on M. verticillata EO and evaluate its antibacterial activity against Staphylococcus aureus. The EO was obtained by steam distillation. Identification and quantification of their components were determined by GC-MS revealing that the dominated chemical group was oxygenated monoterpenes. Nanoemulsions (NE) were characterized by measuring pH, transmittance, separation percentage, release profile, and morphology. The effect of NE on the growth of S. aureus and cyto-compatibility was also evaluated. The results showed that NE containing a higher percentage of tween 20 exhibited higher stability with an approximated droplet size of 10 nm. The effect of encapsulation process was evaluated by GC-MS revealing that the volatile components in EO were no affected. After 24 h, 74.24 ± 0.75% of EO was released from NE and the antibacterial activity of EO was enhanced considerably by its encapsulation. The incubation of S. aureus with the NE and pure EO, show a bacterial growth inhibition of 58.87% ± 0.99 and 46.72% ± 3.32 (p < 0.05), respectively. In addition, nanoemulsión did not cause toxicity to porcine and equine red blood cells. The results obtained showed that NE could be a potential vehicle for M. verticillata EO with promissory properties to emerge as a tool for developing advanced therapies to control and combat infections.

Nanosystems for the Encapsulation of Natural Products: The Case of Chitosan Biopolymer as a Matrix

Chitosan is a cationic natural polysaccharide, which has emerged as an increasingly interesting biomaterialover the past few years. It constitutes a novel perspective in drug delivery systems and nanocarriers' formulations due to its beneficial properties, including biocompatibility, biodegradability and low toxicity. The potentiality of chemical or enzymatic modifications of the biopolymer, as well as its complementary use with other polymers, further attract the scientific community, offering improved and combined properties in the final materials. As a result, chitosan has been extensively used as a matrix for the encapsulation of several valuable compounds. In this review article, the advantageous character of chitosan as a matrix for nanosystemsis presented, focusing on the encapsulation of natural products. A five-year literature review is attempted covering the use of chitosan and modified chitosan as matrices and coatings for the encapsulation of natural extracts, essential oils or pure naturally occurring bioactive compounds are discussed.

Essential Oils-Loaded Electrospun Biopolymers: A Future Perspective for Active Food Packaging

The growth of global food demand combined with the increased appeal to access different foods from every corner of the globe is forcing the food industry to look for alternative technologies to increase the shelf life. Essential oils (EOs) as naturally occurring functional ingredients have shown great prospects in active food packaging. EOs can inhibit the growth of superficial food pathogens, modify nutritious values without affecting the sensory qualities of food, and prolong the shelf life when used in food packaging as an active ingredient. Since 2016, various reports have demonstrated that combinations of electrospun fibers and encapsulated EOs could offer promising results when used as food packaging. Such electrospun platforms have encapsulated either pure EOs or their complexation with other antibacterial agents to prolong the shelf life of food products through sustained release of active ingredients. This paper presents a comprehensive review of the essential oil-loaded electrospun fibers that have been applied as active food packaging material.

Encapsulation of Essential Oils for the Development of Biosourced Pesticides with Controlled Release: A Review

Essential oil (EO) encapsulation can be carried out via a multitude of techniques, depending on applications. Because of EOs’ biological activities, the development of biosourced pesticides with EO encapsulation is of great interest. A lot of methods have been developed; they are presented in this review, together with the properties of the final products. Encapsulation conserves and protects EOs from outside aggression, but also allows for controlled release, which is useful for applications in agronomy. The focus is on the matrices that are of interest for the controlled release of their content, namely: alginate, chitosan, and cyclodextrin. Those three matrices are used with several methods in order to create EO encapsulation with different structures, capacities, and release profiles.

Crystallisation properties of amorphous cyclodextrin powders and their complexation with fish oil

Water-induced crystallisation of amorphous core-cyclodextrin (CD) complex is an essential step in a solid encapsulation process and removal of added water is a challenging. Ethanol addition is expected to shorten the complex dehydration time. This study investigated crystallisation of amorphous spray-dried α-, β- and γ-CD powders by direct mixing 15% (w/w) of ethanol:water mixture (0:100, 20:80, 40:60, 60:40, 80:20 and 100:0) over 72 h period. The results showed α- and β-CD powders crystallised at all concentrations of ethanol solutions. Especially mixed with 0:100 and 20:80 ethanol:water solutions, the crystallisation behaviour of α- and β-CD powders was similar to that of commercial crystalline counterparts. γ-CD powders exhibited a crystallisation sign as mixed with 0:100 and 20:80 ethanol:water solutions only. In the study of fish oil encapsulation using the mixture of water and ethanol to induce the complex crystallisation, only γ-CD powder was able to form complex with fish oil.

Lippia gracilis essential oil in β-cyclodextrin inclusion complexes: an environmentally safe formulation to control Aedes aegypti larvae

BACKGROUND

One of the most efficient ways to prevent arboviruses, such as dengue fever, yellow fever, chikungunya and Zika, is by controlling their vector, the Aedes aegypti. Because this vector is becoming resistant to most larvicides used, the development of new larvicides should be considered. β-Cyclodextrin (β-CD) complexes have been investigated as an interesting way of enabling the use of essential oils in water as larvicides. This study comprised the development of Lippia gracilis essential oil (LGEO) and β-CD inclusion complexes for control of Ae. aegypti.

RESULTS

Thermal analysis clearly showed the formation of complexes using kneading and co-evaporation methods. Gas chromatography analysis showed that kneading without co-solvent (KW) gave the highest content (∼ 15%) of the LGEO major component. Moreover, KW showed that the complex had a 50% lethal concentration (LC₅₀ ; 33 ppm) lower than that of pure LGEO (39 ppm); in other words, complexing LGEO with β-CD improved the larvicidal activity. In addition, LGEO complexed with β-CD (KW) was not harmful to non-target organisms at the concentrations needed to control Ae. aegypti larvae.

CONCLUSION

The inclusion complex with LGEO was a feasible formulation, being economically viable, easy-to-apply and without impact on non-target organisms and, therefore, is a potential alternative larvicide for Ae. aegypti control. © 2018 Society of Chemical Industry.

Preparation of Tea Tree Oil/Poly(styrene-butyl methacrylate) Microspheres with Sustained Release and Anti-Bacterial Properties

Using butyl methacrylate (BMA) and styrene (St) as monomers and divinylbenzene (DVB) as a crosslinking agent, P(St-BMA) microspheres were prepared by suspension polymerization. Tea tree oil (TTO) microspheres were prepared by adsorbing TTO on P(St-BMA) microspheres. The structure and surface morphology of P(St-BMA) microspheres and TTO microspheres were characterized by Fourier transformed infrared spectroscopy (FTIR), optical microscopy, and Thermogravimetric analysis (TGA). In doing so, the structural effect of P(St-BMA) microspheres on oil absorption and sustained release properties could be investigated. The results show that the surface of the P(St-BMA) microspheres in the process of TTO microsphere formation changed from initially concave to convex. The TTO microspheres significantly improved the stability of TTO, which was found to completely decompose as the temperature of the TTO increased from about 110 °C to 150 °C. The oil absorption behavior, which was up to 3.85 g/g, could be controlled by adjusting the monomer ratio and the amount of crosslinking agent. Based on Fickian diffusion, the sustained release behavior of TTO microspheres was consistent with the Korsmeyer-Pappas kinetic model. After 13 h of natural release, the anti-bacterial effect of the TTO microspheres was found to be significantly improved compared to TTO.

Plasma-treated poly(ethylene oxide) nanofibers containing tea tree oil/beta-cyclodextrin inclusion complex for antibacterial packaging

This work describes the effect of cold nitrogen plasma to enhance the antibacterial activity of poly(ethylene oxide) (PEO) nanofibers containing antibacterial agent. Beta-cyclodextrin (β-CD) and tea tree oil (TTO) were used as a host-guest to form water-soluble inclusion complex. The encapsulation efficiency of TTO in inclusion complex could reach 73.23% at 60°C. As antibacterial agent, the inclusion complex was encapsulated into PEO matrix by electrospun. After plasma treatment, the release efficiency of antibacterial agent from PEO nanofibers was improved. As a result, the antibacterial activity of PEO nanofibers was enhanced accordingly. The plasma-treated nanofiber membranes achieved the highest antibacterial activity against Escherichia coli O157:H7, which was tested on the beef for 7d, with inhibition efficiently of 99.99% whether at 4°C or 12°C. The plasma-treated PEO nanofiber membranes containing TTO/β-CD inclusion complex (TTO/β-CD-IC) can prolong the shelf-life of beef, suggesting it has potential application in active food packaging.

Antibacterial poly(ethylene oxide) electrospun nanofibers containing cinnamon essential oil/beta-cyclodextrin proteoliposomes

A novel antibacterial packaging material was engineered by incorporating cinnamon essential oil/β-cyclodextrin (CEO/β-CD) proteoliposomes into poly(ethylene oxide) (PEO) nanofibers by electrospinning technique. Herein, PEO was a stabilizing polymer and used as electrospinning polymeric matrix for the fabrication of CEO/β-CD proteoliposomes nanofibers. The nanoliposomes were inlaid with protein are defined as proteoliposomes. Taking advantage of bacterial protease secreted from Bacillus cereus (B. cereus), the controlled release of CEO from proteoliposomes was achieved via proteolysis of protein in proteoliposomes. The CEO/β-CD inclusion complex was prepared by the aqueous solution method and characterized by Raman and FTIR spectroscopy. After the treatment of CEO/β-CD proteoliposomes nanofibers packaging, the satisfactory antibacterial efficiency against B. cereus on beef was realized without any impact on sensory quality of beef. This study demonstrated that the CEO/β-CD proteoliposomes nanofibers can significantly extend the shelf life of beef and have potential application in active food packaging.

Pulmonary delivery of tea tree oil-β-cyclodextrin inclusion complexes for the treatment of fungal and bacterial pneumonia

Objectives

Bacterial pneumonia is a common cause of death worldwide. Tea tree oil (TTO) is a potent antimicrobial natural product, which is formulated in dry powder inhalers (DPIs) for the treatment of fungal and bacterial pneumonia.

Methods

Tea tree oil-β-cyclodextrin inclusion complexes (TTO-β-CD) were prepared and characterized. Aerodynamic properties of TTO-β-CD powders were measured. The rat models of fungal (Candida albicans) and bacterial (Acinetobacter baumannii) pneumonia were prepared. Saline, TTO, TTO-β-CD and the positive drug (fluconazole or penicillin) were directly delivered to the rat lungs. Pathological and biological assays were conducted.

Key findings

Tea tree oil-β-CD powders had an appropriate aerodynamic diameter of 5.59 μm and the fine particle fraction of 51.22%, suitable for pulmonary delivery. TTO-β-CD showed higher and similar antipneumonic effects on the rat models than fluconazole and penicillin, respectively. The effects of TTO-β-CD were higher than TTO alone. The antipneumonic mechanisms involved blocking the recruitment of leucocytes and neutrophils, eliminating the microbes, downregulating pro-inflammatory cytokines (including tumour necrosis factor-α, interleukin-1β and interleukin-6), suppressing cyclooxygenase 2 expression, and further reducing lung injury.

Conclusions

Inhaled TTO-β-CD powders have the advantages of portability, high stability, self-administration, high lung deposition and good antipneumonic effect. It is a promising DPI for the treatment of fungal and bacterial pneumonia.

Methods to characterize the structure of food powders – a review

Food powders can exist in amorphous, crystalline or mixed structure depending on the order of molecular arrangement in the powder particle matrices. In food production, the structure of powders has a greatly effect on their stability, functionality, and applicability. The undesirable structure of powders can be accidentally formed during production. Therefore, characterization of powder structure as well as quantification of amorphous–crystalline proportions presenting in the powders are essential to control the quality of products during storage and further processing. For these purposes, many analytical techniques with large differences in the degree of selectivity and sensitivity have been developed. In this review, differences in the structure of food powders are described with a focus being placed on applications of amorphous powders. Essentially, applicability of common analytical techniques including X-ray, microscopic, vapor adsorption, thermal, and spectroscopic approaches for quantitative and qualitative structural characterization of food powders is also discussed.