Lipase from liver of seabass (Lates calcarifer): Characteristics and the use for defatting of fish skin

Chemical Compositions and Characteristics of Biocalcium from Pre-Cooked Tuna Bone as Influenced by Sodium Chloride Pretreatment and Defatting by Asian Seabass Lipase

Pre-cooked bone is a waste product generated during tuna processing and can serve as a potential source of biocalcium (BC). Generally, non-collagenous protein and fat must be removed properly from bone. A NaCl solution can be used to remove such proteins, while fish lipase can be used in a green process, instead of solvent, for fat removal. Thus, this study aimed to investigate the impact of NaCl pretreatment at different concentrations in combination with heat to eliminate non-collagenous proteins, and to implement fish lipase treatments at varying levels for fat removal, for BC production from pre-cooked tuna bone. Optimal NaCl pretreatment of bone was achieved when a 5% NaCl solution at 80 °C was used for 150 min. The lowest lipid content was obtained for bone defatted with crude lipase extract (CLE) at 0.30 Unit/g of bone powder for 2 h. BC powder from bone defatted with CLE (DF-BC) possessed greater contents of ash, calcium, and phosphorus and smaller particle sizes than the control BC powder. X-ray diffractograms suggested that both BC powders consisted of hydroxyapatite as a major compound, which had a crystallinity of 62.92-63.07%. An elemental profile confirmed the presence of organic and inorganic matter. Thus, BC powder could be produced from pre-cooked tuna bone using this 'green process'.

Formation mechanism of lipid-derived volatile flavor compounds metabolized by inoculated probiotics and their improving effect on the flavor of low-salt dry-cured mackerel

This study aimed to evaluate the contribution and mechanisms of Lactobacillus plantarum and Zygosaccharomyces mellis inoculation to the enhancement of aroma in low-salt dry-cured mackerel (LDCM). Inoculating probiotics significantly improved the LDCM's aroma, with mixed probiotics showing a superior effect. The contents of lipid-derived volatile flavor compounds (LVFCs), free fatty acid contents, and key enzyme activities significantly increased (p < 0.05) in probiotic-treated groups. The dominant species in the probiotics-treated groups were the inoculated Lactobacillus plantarum and Zygosaccharomyces mellis, which were the main producer of metabolic enzymes for the generation of LVFCs. Lactobacillus plantarum performed well in lipid hydrolysis and aldehydes reduction, while Zygosaccharomyces mellis played a main role in aldehyde production.

Lipase-Catalyzed Synthesis of Structured Fatty Acids Enriched with Medium and Long-Chain n-3 Fatty Acids via Solvent-Free Transesterification of Skipjack Tuna Eyeball Oil and Commercial Butterfat

Human milk lipids generally have the maximum long-chain fatty acids at the sn-2 position of the glycerol backbone. This positioning makes them more digestible than long-chain fatty acids located at the sn-1, 3 positions. These unique fatty acid distributions are not found elsewhere in nature. When lactation is insufficient, infant formula milk has been used as a substitute. However, the distribution of most fatty acids ininfant formula milk is still different from human milk. Therefore, structured lipids were produced by the redistribution of medium-chain fatty acids from commercial butterfat (CBF) and n-3 and n-6 long-chain fatty acids from skipjack tuna eyeball oil (STEO). Redistribution was carried out via transesterification facilitated by Asian seabass liver lipase (ASL-L). Under the optimum conditions including a CBF/STEO ratio (3:1), transesterification time (60 h), and ASL-L unit (250 U), the newly formed modified-STEO (M-STEO) contained 93.56% triacylglycerol (TAG), 0.31% diacylglycerol (DAG), and 0.02% monoacylglycerol (MAG). The incorporated medium-chain fatty acids accounted for 18.2% of M-STEO, whereas ASL-L could incorporate 40% of n-3 fatty acids and 25-30% palmitic acid in M-STEO. The 1H NMRA and 13CNMR results revealed that the major saturated fatty acid (palmitic acid) and unsaturated fatty acids (DHA and EPA) were distributed at the sn-2 position of the TAGs in M-STEO. Thus, M-STEO enriched with medium-chain fatty acids and n-3 fatty acids positioned at the sn-2 position of TAGs can be a potential substitute for human milk fatty acids in infant formula milk (IFM).

Investigation of the Alternations in Lipid Oxidation and Lipase Activity in Air-Dried Hairtail (Trichiurus lepturus) during Chilled Storage

The effects of water content and water activity on the lipid stability of air-dried hairtail (Trichiurus haumela) were investigated during chilled storage. Air-dried hairtail samples with high and low water contents were comparatively analyzed over 8 days of storage at 4 °C. The results indicated that the decreases in water activity and increases in the NaCl content significantly inhibited lipid oxidation in the air-dried hairtail samples. The peroxidation value (PV), conjugated diene value (CD), thiobarbituric acid reactive substance (TBARS) value, and p-anisidine value (p-AnV) of the air-dried hairtail significantly increased with the extension of storage time. The low water content significantly inhibited the activity of neutral and alkaline lipase, in addition to lipoxygenase, and retarded the rapid increases in the non-esterified fatty acid (NEFA) content in the hairtail samples. The correlation analysis results showed that the TBARS, p-AnV, and lipase activity were positively correlated in the air-dried hairtail samples, and the lower water content significantly inhibited the progress of lipid oxidation. This study offers a theoretical framework for the industrial processing and storage of air-dried hairtail products.

Influence of solvent-free extraction of fish oil from catfish (Clarias magur) heads using a Taguchi orthogonal array design: A qualitative and quantitative approach

This study aimed to efficiently utilize catfish heads, enhancing the oil extraction process while improving the cost-effectiveness of fish byproduct management. The study employed the wet rendering method, a solvent-free approach, utilizing a two-factor Taguchi orthogonal array design to identify critical parameters for optimizing oil yield and ensuring high-quality oil attributes. The extraction temperature (80-120°C) and time (5-25 min) were chosen as variables in the wet rendering process. Range analysis identified the extraction time as a more significant (p < 0.05) factor for most parameters, including oil yield, oil recovery, acid value, free fatty acids, peroxide value, and thiobarbituric acid reactive substances. The extraction temperature was more significant (p < 0.05) for oil color. Consequently, the wet rendering method was optimized, resulting in an extraction temperature of 80°C and an extraction time of 25 min, yielding the highest oil yield. This optimized wet rendering process recovered 6.37 g/100 g of oil with an impressive 54.16% oil recovery rate, demonstrating comparable performance to traditional solvent extraction methods. Moreover, Fourier transfer infrared spectra analysis revealed distinct peaks associated with triacylglycerols and polyunsaturated fatty acids (PUFA). The oil recovered under optimized conditions contained higher levels of PUFA, including oleic acid (189.92 μg/g of oil), linoleic acid (169.92 μg/g of oil), eicosapentaenoic acid (17.41 μg/g of oil), and docosahexaenoic acid (20.82 μg/g of oil). Volatile compound analysis revealed lower levels of secondary oxidation compounds under optimized conditions. This optimized wet rendering method offers practical advantages in terms of cost-efficiency, sustainability, reduced environmental impact, and enhanced oil quality, making it an attractive option for the fish processing industries. Future research possibilities may include the purification of the catfish head oil and its application in the food and pharmaceutical industries.

The investigation of batch-to-batch variabilities in the composition of isolates from fish and mammalian species using different protocols

The aim of this study was to investigate batch-to-batch inconsistencies in the processing of pig and fish collagen isolates processed using two protocols that differed in terms of the acetic acid concentrations applied and the pre- and post-extraction steps, and which were previously tested in our laboratory with the intention of preserving the biological structures and functions of the collagen isolates for biomedical purposes. Both the major and minor components such as the amino acids, lipids, water, glycosaminoglycan and ash contents and elemental content, as well as the structure and morphology of the raw sources and the resulting batches of isolates were subsequently examined in detail applying standardized analytical methods including high perfomance liquid chromatography, ultraviolet-visible and infrared spectrometry, polyacrylamide gel electrophoresis, energy dispersive spectroscopy and scanning electron microscopy. All the fish isolates provided severalfold higher yields (8-45 wt%) than did the pig isolates (3-9 wt%). In addition, the variability of the fish isolate yields (the coefficient of variation for processing A: 16.4-32.9 % and B: 6.8-17.4 %) was significantly lower (p ≤ 0.05, n = 5) than that of the pig isolates (A: 27.7-69.8 %; B: 35.3-87.9 %). In general, the fish skin batches had significantly higher protein contents (˃60 wt%) and lower lipid contents (<10 wt%) than the pig skin batches (<55 wt% protein and up to 66 wt% lipid). In addition, the fish skin batches did not differ significantly in terms of their composition applying the same processing method, whereas the pig skin batches exhibited considerable variations in terms of their compositions, particularly regarding the protein and lipid contents. It can be stated that, concerning the fish isolates, processing B was, in most cases, slightly more efficient and reproducible than processing A. However, concerning the pig isolates, although processing A appeared to be more efficient than processing B in terms of the yield, it resulted in the production of isolates that contained a certain level of contaminants. The study provides a comprehensive discussion on the suitability of the processing protocol in terms of producing batches of reproducible quality according to the specific type of biomaterial processed from different animal species.

LC-MS/MS based characterisation and differential expression of proteins in Himalayan snow trout, Schizothorax labiatus using LFQ technique

Molecular characterization of fish muscle proteins are nowadays considered as a key component to understand the role of specific proteins involved in various physiological and metabolic processes including their up and down regulation in the organisms. Coldwater fish specimens including snow trouts hold different types of proteins which help them to survive in highly diversified temperatures fluctuating from 0 to 20 °C. So, in current study, the liquid chromatography mass spectrometry using label free quantification technique has been used to investigate the muscle proteome profile of Schizothorax labiatus. For proteomic study, two weight groups of S. labiatus were taken from river Sindh. The proteomic analysis of group 1 revealed that a total of 235 proteins in male and 238 in female fish were recorded. However, when male and female S. labiatus were compared with each other on the basis of spectral count and abundance of peptides by ProteinLynx Global Server software, a total of 14 down-regulated and 22 up-regulated proteins were noted in this group. The highly down-regulated ones included homeodomain protein HoxA2b, retinol-binding protein 4, MHC class II beta chain and proopiomelanocortin while as the highly expressed up-regulated proteins comprised of gonadotropin I beta subunit, NADH dehydrogenase subunit 4, manganese superoxide dismutase, recombinase-activating protein 2, glycosyltransferase, chymotrypsin and cytochrome b. On the other hand, the proteomic characterisation of group 2 of S. labiatus revealed that a total of 227 proteins in male and 194 in female fish were recorded. When male and female S. labiatus were compared with each other by label free quantification, a total of 20 down-regulated and 18 up-regulated proteins were recorded. The down-regulated protein expression of group 2 comprised hepatic lipase, allograft inflammatory factor-1, NADH dehydrogenase subunit 4 and myostatin 1 while the highly expressed up-regulated proteins included glycogen synthase kinase-3 beta variant 2, glycogen synthase kinase-3 beta variant 5, cholecystokinin, glycogen synthase kinase-3 beta variant 3 and cytochrome b. Significant (P < 0.05) difference in the expression of down-regulated and up-regulated proteins was also noted between the two sexes of S. labiatus in each group. According to MS analysis, the proteins primarily concerned with the growth, skeletal muscle development and metabolism were down-regulated in river Sindh, which indicates that growth of fish during the season of collection i.e., winter was slow owing to less food availability, gonad development and low metabolic activity. While, the proteins related to immune response of fish were also noted to be down-regulated thereby signifying that the ecosystem has less pollution loads, microbial, pathogenic and anthropogenic activities. It was also found that the proteins involved in glycogen metabolism, reproductive and metabolic processes, particularly lipid metabolism were up-regulated in S. labiatus. The significant expression of these proteins may be connected to pre-spawning, gonad development and use of stored food as source of energy. The information generated in this study can be applied to future research aimed at enhancing food traceability, food safety, risk management and authenticity analysis.

Research Progress on Nutritional Value, Preservation and Processing of Fish-A Review

The global population has rapidly expanded in the last few decades and is continuing to increase at a rapid pace. To meet this growing food demand fish is considered a balanced food source due to their high nutritious value and low cost. Fish are rich in well-balanced nutrients, a good source of polyunsaturated fatty acids and impose various health benefits. Furthermore, the most commonly used preservation technologies including cooling, freezing, super-chilling and chemical preservatives are discussed, which could prolong the shelf life. Non-thermal technologies such as pulsed electric field (PEF), fluorescence spectroscopy, hyperspectral imaging technique (HSI) and high-pressure processing (HPP) are used over thermal techniques in marine food industries for processing of most economical fish products in such a way as to meet consumer demands with minimal quality damage. Many by-products are produced as a result of processing techniques, which have caused serious environmental pollution. Therefore, highly advanced technologies to utilize these by-products for high-value-added product preparation for various applications are required. This review provides updated information on the nutritional value of fish, focusing on their preservation technologies to inhibit spoilage, improve shelf life, retard microbial and oxidative degradation while extending the new applications of non-thermal technologies, as well as reconsidering the values of by-products to obtain bioactive compounds that can be used as functional ingredients in pharmaceutical, cosmetics and food processing industries.

Insight into the incredible effects of microwave heating: Driving changes in the structure, properties and functions of macromolecular nutrients in novel food

Microwave heating technology performs the characteristics of fast heating, high efficiency, green energy saving and easy control, which makes it deeply penetrate into the food industry and home cooking. It has the potential to alter the appearance and flavor of food, enhance nutrient absorption, and speed up the transformation of active components, which provides an opportunity for the development of innovation foods. However, the change of food driven by microwave heating are very complex, which often occurs beyond people's cognition and blocks the development of new food. It is thus necessary to explore the transformation mechanism and influence factors from the perspectives of microwave technology and food nutrient diversity. This manuscript focuses on the nutritional macromolecules in food, such as starch, lipid and protein, and systematically analyzes the change rule of structure, properties and function under microwave heating. Then, the flavor, health benefits, potential safety risks and bidirectional allergenicity associated with microwave heating are fully discussed. In addition, the development of new functional foods for health needs and future market based on microwave technology is also prospected. It aims to break the scientific fog of microwave technology and provide theoretical support for food science to understand the change law, control the change process and use the change results.

Resource recovery from fish waste: Prospects and the usage of intensified extraction technologies

Globally, the valorization of fish biowaste as a feedstock to recover valuable components is an emerging research and commercial interest area to achieve the SDG goals by 2030. Fish waste-derived biomolecules are increasingly finding diverse applications in food and other biotechnological fields due to their excellent chemical, structural and functional properties. The focus of this review is to highlight the conventional valorization routes and recent advancements in extraction technologies for resource recovery applications, primarily focusing on green processes. Biointensified processes involving ultrasound, microwave, sub- and supercritical fluids, pulsed electric field, high-pressure processing, and cold plasma are extensively explored as sustainable technologies for valorizing fish discards and found numerous applications in the production of functional and commercially important biomaterials. With challenges in recovering intracellular bioactive compounds, selectivity, and energy requirement concerns, conventional approaches are being relooked continuously in the quest for process intensification and sustainable production practices. Nonetheless, in the context of 'zero waste' and 'biorefinery for high-value compounds', there is immense scope for technological upgradation in these emerging alternative approaches. This work details such attempts, providing insights into the immense untapped potential in this sector.

An encapsulated report on enzyme-assisted transesterification with an allusion to lipase

Biodiesel is a renewable, sulfur-free, toxic-free, and low carbon fuel which possesses enhanced lubricity. Transesterification is the easiest method employed for the production of biodiesel, in which the oil is transformed into biodiesel. Biocatalyst-mediated transesterification is more advantageous than chemical process because of its non-toxic nature, the requirement of mild reaction conditions, absence of saponification, easy product recovery, and production of high-quality biodiesel. Lipases are found to be the primary enzymes in enzyme-mediated transesterification process. Currently, researchers are using lipases as biocatalyst for transesterification. Lipases are extracted from various sources such as plants, microbes, and animals. Biocatalyst-based biodiesel production is not yet commercialized due to high-cost of purified enzymes and higher reaction time for the production process. However, research works are growing in the area of various cost-effective techniques for immobilizing lipase to improve its reusability. And further reduction in the production cost of lipases can be achieved by genetic engineering techniques. The reduction in reaction time can be achieved through ultrasonic-assisted biocatalytic transesterification. Biodiesel production by enzymatic transesterification is affected by many factors. Various methods have been developed to control these factors and improve biodiesel production. This report summarizes the various sources of lipase, various production strategies for lipase and the lipase-mediated transesterification. It is fully focused on the lipase enzyme and its role in biodiesel production. It also covers the detailed explanation of various influencing factors, which affect the lipase-mediated transesterification along with the limitations and scope of lipase in biodiesel production.

Effect of lipase incorporation on gelling properties of catfish (Clarias lazera) surimi and its mechanism

BACKGROUND

Recently, fatty fish have been utilized as a potential approach for the fabrication of surimi products, with the yield of fatty fish surimi being > 10 000 tons in 2019. However, the gelling properties of catfish surimi can be influenced by intermuscular lipid. Lipase could effectively enhance the gel quality of catfish surimi gels, although the chemical forces involved in gel formation and alteration in lipid and protein oxidation status are not well understood. The present study investigated the gelation-enhancing effects of lipase on catfish surimi based on changes in chemical oxidation interactions.

RESULTS

The addition of 7.5 g kg^-1 lipase significantly increased the hydrophobic interactions and disulfide bond contents, both of which facilitated gel formation, in surimi gels. The 2-thiobarbituric acid reactive substance and carbonyl concentrations demonstrated that lipase promoted lipid and protein oxidations. Furthermore, an appropriate dose of malondialdehyde accelerated protein oxidation, thereby resulting in the covalent cross-linking of proteins. Consequently, the gel strength increased from 55.72 to 127.71 g × cm with lipase contents of up to 7.5 g kg^-1 , and strong chemical cross-linking and a compact network were observed via sodium dodecyl sulfate polyacrylamide gel electrophoresis and scanning electron microscopy. However, excessive oxidation led to the degeneration of the gel matrix. A schematic mechanism, mainly based on the chemical changes, is proposed.

CONCLUSION

The present study revealed the gelation mechanism of catfish surimi gels with lipase, and suggested that lipase treatments may be an effective approach for improving the textural properties of fatty fish surimi gels. © 2021 Society of Chemical Industry.

Bioactive peptides from fisheries residues: A review of use of papain in proteolysis reactions

Papain is a cysteine endopeptidase of vegetal origin (papaya (Carica papaya L.) with diverse applications in food technology. In this review we have focused our attention on its application in the production of bio-peptides by hydrolysis of proteins from fish residues. This way, a residual material, that can become a contaminant if dumped without control, is converted into highly interesting products. The main bioactivity of the produced peptides is their antioxidant activity, followed by their nutritional and functional activities, but peptides with many other bioactivities have been produced. Thera are also examples of production of hydrolysates with several bioactivities. The enzyme may be used alone, or in combination with other enzymes to increase the degree of hydrolysis.

Fish Waste: From Problem to Valuable Resource

Following the growth of the global population and the subsequent rapid increase in urbanization and industrialization, the fisheries and aquaculture production has seen a massive increase driven mainly by the development of fishing technologies. Accordingly, a remarkable increase in the amount of fish waste has been produced around the world; it has been estimated that about two-thirds of the total amount of fish is discarded as waste, creating huge economic and environmental concerns. For this reason, the disposal and recycling of these wastes has become a key issue to be resolved. With the growing attention of the circular economy, the exploitation of underused or discarded marine material can represent a sustainable strategy for the realization of a circular bioeconomy, with the production of materials with high added value. In this study, we underline the enormous role that fish waste can have in the socio-economic sector. This review presents the different compounds with high commercial value obtained by fish byproducts, including collagen, enzymes, and bioactive peptides, and lists their possible applications in different fields.

Impact of microwave processing on the secondary structure, in-vitro protein digestibility and allergenicity of shrimp (Litopenaeus vannamei) proteins

This study aimed to evaluate the effects of microwave processing (2.45 GHz, 1000 W, 75-125 °C, and 5-15 min) on the secondary structures, in-vitro protein digestibility, microstructural characteristics, and allergenicity of shrimp. SDS-PAGE analysis showed that the band intensity of tropomyosin reduced with the increase of processing temperatures and durations. The significant reduction in the allergenicity of tropomyosin was up to 75% when treated with microwave at 125 °C for 15 min. A significant reduction by 30-75% in the total soluble protein content, peptide content, and in-vitro protein digestibility of shrimp protein was observed. These changes mentioned above were strongly associated with the modification of the secondary structure of shrimp proteins, including the increase in β-sheets, and the loss in turns. Also, more microscopic holes, fragments, strips in treated samples were observed by scanning electron microscopy. Therefore, high-intensity microwave treatment showed great potential in reducing the allergenicity of shrimp.

Effect of heat extraction on water-soluble taste substances in processing products of chilled large yellow croaker (Pseudosciaena crocea)

In this paper, we analyzed the umami amino acids composition and content in minced meat (MM), fish head meat (HM), and fish roe (R). According to different ratios of material to liquid, we extracted water-soluble taste substances from the three materials and then compared composition and content of the umami amino acids and taste nucleotides in the different water-soluble taste substances. Finally, we analyzed Taste Activity Value (TAV) and the Equivalent Umami Concentration (EUC) between umami amino acids and taste nucleotides. The results showed that umami amino acids total content in MM, HM, and R samples were, respectively, 50.63 mg/100 g, 41.95 mg/100 g, and 67.06 mg/100 g. When the water-soluble taste substances extracted from the above samples were in the "D" state (MM), the "C" state (HM), and the "C" state (R), respectively, the umami amino acid content could be comparable to the original sample. And the highest EUCs were respectively 1.37 g MSG/100 g, 0.87 g MSG/100 g, and 0.49 g MSG/100 g (MSG: Sodium Glutamate). To some extent, the results of this study indicated that the water-soluble taste substances could be equivalent to the original sample and could be further applied as a taste regulator in some respects.

Effect of Pulsed Electric Field-Assisted Process in Combination with Porcine Lipase on Defatting of Seabass Skin

Defatting of seabass skins using pulsed electric field (PEF)-assisted process at different electric field strengths (16 and 24 kV/cm) and times (36, 72, and 108 ms) in combination with porcine pancreas lipase (PPL) at 25 U/g dry matter was investigated. PEF-treated skin at 24 kV/cm for 72 ms followed by PPL treatment removed 86.93% lipids. PEF-treated skin was further optimized for lipid reduction by response surface methodology. Central composite design was adopted to establish treatments based on two independent variables, involving PPL concentration (30 to 55 U/g dry matter) and hydrolysis time (60 to 180 min). Second-order polynomial model was used for predicting the response. The highest lipid removal (91.96 ± 1.70%) was attained when the optimal condition (42.36 PPL units/g dry skin matter for 139.78 min) was used. The experiment value was in accordance with the predicted value. PEF-PPL-treated skin had lower monounsaturated and polyunsaturated fatty acids than the solvent-extracted skin (P < 0.05). When PEF-PPL-treated skin was hydrolyzed using papain at 0.30 U/g dry matter, lower fishy odor/flavor of resulting hydrolyzed collagen (PEF-PPL-HC) was found than other samples (P < 0.05). Lower total volatile compounds were also obtained in PEF-PPL-HC sample. Thus, the use of PEF pretreatment along with PPL before papain hydrolysis effectively prevented the formation of fishy odor/flavor in hydrolyzed collagen from seabass skin. PRACTICAL APPLICATION: Fishy odor/flavor caused by lipid oxidation of fish skin hydrolysates limits their applications in foods. Defatting process is the significant step for skin pretreatment. Although several methods could remove lipids from fish skins, either by lipase or solvent extraction, fishy odor/flavor is still detected in hydrolysate. Pulsed electric field-assisted process in combination with porcine lipase is another approach that can be used to enhance efficiency via electroporation, causing the loosened skin matrix and facilitating the migration of lipase into the skin. Consequently, the resulting hydrolysate might have the lowered fishy odor/flavor and could be used in foods, especially for fortification.

Distribution and Characteristics of Polyphenoloxidase from Pacific White Shrimp (Litopenaeus vannamei)

Distribution of polyphenoloxidase (PPO) from different anatomical parts of Pacific white shrimp was examined. Among all parts, cephalothorax possessed the maximal PPO activity (P < 0.05), followed by pereopods, telson, pleopods, carapace, cuticle, and muscle, respectively. The higher PPO activity in cephalothorax was in line with the greater melanosis in this part during chilled storage. According to activity-staining toward 3,4-dihydroxy-ʟ-phenylalanine (ʟ-DOPA), PPO exhibited an activity band with a molecular weight (MW) of 210 kDa. When cephalothorax PPO was purified using ammonium sulfate precipitation and a series of chromatographic techniques, involving DEAE-Sepharose anion exchange and Sephadex G-75 gel filtration columns, homogeneity was obtained. Based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and native-PAGE, the Sephadex G-75 fraction showed a single band. The MW band on SDS-PAGE and gel filtration was estimated as 210 kDa, suggesting a monomeric molecule. For the inhibitor study, cysteine and 4-hexylresorcinol showed competitive inhibition toward PPO, while epigallocatechin gallate and kojic acid demonstrated mixed-type inhibition toward PPO. PRACTICAL APPLICATION: Melanosis (black spot formation) triggered by polyphenoloxidase (PPO) drastically reduces the shelf-life of shrimp. PPO was localized in several anatomical parts of Pacific white shrimp with varying activities. Certain compounds, including cysteine, 4-hexylresorcinol, epigallocatechin gallate, and kojic acid, showed PPO inhibitory activity with different modes of inhibition. The obtained information provided a promising method for manufacturers to keep the prime eating quality of Pacific white shrimp throughout postmortem transportation and storage using selected PPO inhibitors.

Hydrolyzed collagen from porcine lipase-defatted seabass skin: Antioxidant, fibroblast cell proliferation, and collagen production activities

Defatting of seabass skins using porcine pancreas lipase (PPL) at 25 or 50 units/g dry matter) for 1-3 hr at 30ºC was investigated. Treatment of seabass skin with PPL (25 unit/g dry matter) for 3 hr removed 83.81% lipids when compared to 57.27% using isopropanol. Hydrolysis of PPL-treated skin by papain (0.3 unit/g dry matter) (PPL-papain-3 process) at 40ºC for 90 min provided hydrolyzed collagen (HC) with higher yield, α-amino group content, ferric-reducing antioxidant power, and metal chelating activity than other treatments (p < 0.05). There was no difference in fishy odor between HC from PPL-papain-2 and PPL-papain-3 processes (p > 0.05). All the HC (50-250 µg/ml) samples stimulated L929 fibroblast cell proliferation and also induced collagen production in a dose-dependent manner. Also, all HC contained peptides with molecular weight of 406-11,860 Da. Gly and imino acids were dominant amino acids in HC prepared with PPL-papain-3 process. PRACTICAL APPLICATIONS: Seabass skin is a potential raw material for the production of hydrolyzed collagen (HC). However, seabass skin contains a large amount of lipids, including polyunsaturated fatty acids. These unsaturated lipids are oxidized during processing, particularly during hydrolysis at high temperature. This leads to the development of undesirable odor, especially fishy odor. Therefore, seabass skin defatting is an important step for improving the quality of the resulting HC. The use of lipase is an alternative method that can be used to remove lipids in skins without using solvents. HC from defatted skins will contain bioactive peptides and therefore, can be used as a food supplement or for skin nourishment.