Hexafluoroisopropanol-induced salt-free catanionic surfactant coacervate extraction method for determination of fluoroquinolones in milk samples

Supramolecular solvents based on hydrophobic natural deep eutectic solvents and primary amines for preconcentration and determination of enrofloxacin in milk

In this work, coacervation in primary amines solutions with hydrophobic natural deep eutectic solvents based on terpenoids and carboxylic acids was demonstrated for the first time. A liquid-phase microextraction approach was developed based on supramolecular solvent formation with primary amine acting as amphiphile and hydrophobic deep eutectic solvent making up mixed vesicles and serving as coacervation agent. Such supramolecular solvents could be used to separate wide range of substances from different aqueous media, such as food products, biological liquids and wastewaters. It is important that both hydrophobic and ionic interactions with supramolecular aggregates take place ensuring synergetic effect and better extraction ability, which is significant in separating relatively polar analytes. Different primary amines and deep eutectic solvents were investigated for liquid-phase microextraction of proof-of-concept amphoteric analyte (enrofloxacin, widely used veterinary fluoroquinolone antibiotic) and its determination by high-performance liquid chromatography with fluorescence detection using Shimadzu LC-20 Prominence chromatograph and RF-20A fluorescence detector. It was found that the supramolecular solvent based on 1-nonylamine, formed after addition of a deep eutectic solvent based on menthol and hexanoic acid (molar ratio of 1:1), provided maximum extraction recovery (85 %) and maximum enrichment factor (34). To characterize the extraction system, the composition of the phases was investigated, and cryo-transmission electron microscopy images were obtained. Vesicular aggregates were observed in the supramolecular solvent. The extraction mechanism was proposed in terms of formation of mixed aggregates to capture the analyte. Limit of detection was found to be 7 μg kg-1, while linear range of 20-250 μg kg-1 was established. Relative standard deviation values were lower than 7 %. Relative bias did not exceed 12 %.

Simultaneous Determination of Nine Quinolones in Pure Milk Using PFSPE-HPLC-MS/MS with PS-PAN Nanofibers as a Sorbent

In this study, a packed-fiber solid-phase extraction (PFSPE)-based method was developed to simultaneously detect nine quinolones, including enrofloxacin (ENR), ciprofloxacin (CIP), ofloxacin (OFL), pefloxacin (PEF), lomefloxacin (LOM), norfloxacin (NOR), sarafloxacin (SAR), danofloxacin (DAN), and difloxacin (DIF), in pure milk, using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). Polystyrene (PS) and polyacrylonitrile (PAN) were combined to form PS-PAN composite nanofibers through electrospinning. The nanofibers were used to prepare the home-made extraction columns, and the process was optimized and validated using blank pure milk. The analytical method showed high accuracy, and the recoveries were 88.68–97.63%. Intra-day and inter-day relative standard deviations were in the ranges of 1.11–6.77% and 2.26–7.17%, respectively. In addition, the developed method showed good linearity (R² ≥ 0.995) and low method quantification limits for the nine quinolones (between 1.0–100 ng/mL) for all samples studied. The nine quinolones in the complex matrix were directly extracted using 4.0 mg of PS-PAN composite nanofibers as a sorbent and completely eluted in 100 μL elution solvent. Therefore, the developed PFSPE-HPLC-MS/MS is a sensitive and cost-effective technique that can effectively detect and control nine quinolones in dairy products.

Recent Advances and Perspectives on the Sources and Detection of Antibiotics in Aquatic Environments

Water quality and safety are vital to the ecological environment, social development, and ecological susceptibility. The extensive use and continuous discharge of antibiotics have caused serious water pollution; antibiotics are widely found in freshwater, drinking water, and reservoirs; and this pollution has become a common phenomenon and challenge in global water ecosystems, as water polluted by antibiotics poses serious risks to human health and the ecological environment. Therefore, the antibiotic content in water should be identified, monitored, and eliminated. Nevertheless, there is no single method that can detect all different types of antibiotics, so various techniques are often combined to produce reliable results. This review summarizes the sources of antibiotic pollution in water, covering three main aspects: (1) wastewater discharges from domestic sewage, (2) medical wastewater, and (3) animal physiology and aquaculture. The existing analytical techniques, including extraction techniques, conventional detection methods, and biosensors, are reviewed. The electrochemical biosensors have become a research hotspot in recent years because of their rapid detection, high efficiency, and portability, and the use of nanoparticles contributes to these outstanding qualities. Additionally, the comprehensive quality evaluation of various detection methods, including the linear detection range, detection limit (LOD), and recovery rate, is discussed, and the future of this research field is also prospected.

Simultaneous determination of 11 quinolone residues in freshwater fish samples by magnetic solid-extraction coupled to liquid chromatography-tandem mass spectrometry

In this study, well-defined core-shell ethylenediamine-functional magnetic ferroferric oxide polymers were prepared and were fully characterized by transmission electron microscopy, scanning electron microscopy, FTIR spectroscopy, and vibrating sample magnetometry. Then, it was used as a magnetic solid-phase extraction adsorbent for simultaneous determination of 11 trace quinolone residues in freshwater fish samples coupled to liquid chromatography-tandem mass spectrometry. The obtained results revealed that the adsorbent showed good extraction efficiency and the adsorption mechanisms referred to hydrogen bond and π-π stacking interaction. Moreover, the magnetic solid-phase extraction conditions were also carefully optimized. The limits of quantitation of 11 quinolones were in the range of 0.15-0.36 μg/kg, while spiking recoveries were in the range of 80.2-99.5% for the 11 quinolones in freshwater fish samples at four spiked levels including limits of quantitation, 1.0, 40.0, and 80.0 μg/kg with the relative standard deviations ranging from 0.8 to 9.1%. The proposed method was applied to analyze 45 freshwater fish samples, and enrofloxacin was detected in 91.1% samples with concentrations ranging from 0.659 to 333 μg/kg. It could be concluded that the proposed method is fast, simple, sensitive, and accurate for the routine monitor of freshwater fish.

Hydrophobic magnetic nanoparticle assisted catanionic surfactant supramolecular solvent microextraction of multiresidue antibiotics in water samples

A novel extraction technique i.e. hydrophobic magnetic nanoparticle (MNP)-assisted in situ supramolecular solvent (SUPRAS) microextraction was proposed, and it was applied for the analysis of sulfonamides (SAs) and fluoroquinolones (FQs) in aqueous samples, coupled with high performance liquid chromatography-UV detection (HPLC-UV). In this extraction method, hexafluoroisopropanol-mediated salt-free catanionic surfactant based SUPRAS in situ microextraction was initially carried out; then, the SUPRAS was quickly adsorbed by the hydrophobic magnetic nanoparticles and gathered by an external magnetic field. This can greatly shorten the separation time and overcome the dependence on centrifugation, and also perform a secondary extraction of free analytes (not extracted by SUPRAS) from water samples. The magnetic separation ability of different hydrophobic MNPs was evaluated by adsorbing supramolecular aggregates from the water sample. The effective parameters affecting the extraction efficiency of the analytes were investigated and optimized using the one variable at a time method. About 3 min was required to realize the extraction of analytes with an enrichment factor (EF) of 12-53 for SAs and 79-118 for FQs. Compared with the centrifugation-assisted SUPRAS microextraction, the hydrophobic MNP-assisted SUPRAS microextraction obtained much better extraction and preconcentration efficiency. The proposed novel extraction method with HPLC-UV provided LODs of 0.21-0.76 ng mL-1 for SAs and 0.10-0.18 ng mL-1 for FQs. Good linearity was obtained with correlation coefficients ranging from 0.9962 to 0.9999. The intra- and inter-day recoveries of the target antibiotics were in the range of 92.0-111.3% with RSD% below 10.4%. The method was successfully applied to determine SAs and FQs in real water samples, such as lake water, river water, reservoir water, and wastewater.

Hydrophilic deep eutectic solvents modified phenolic resin as tailored adsorbent for the extraction and determination of levofloxacin and ciprofloxacin from milk

A reliable and efficient method for the simultaneous extraction and determination of antibiotics of ciprofloxacin and levofloxacin from milk was developed with solid phase extraction based on tailored adsorbent materials of deep eutectic solvents modified phenolic resin (DES-R-SPE). Six types of polyhydric alcohol-based hydrophilic DESs were prepared to modify the phenolic resin with the compositions of 3-aminophenol as a functional monomer, glyoxylic acid as a crosslinker, and polyethylene glycol 6000 as a porogen. And the prepared DES-Rs showed better extraction capacities for the target analytes than the unmodified phenolic resin because of more hydrogen bonding and electrostatic interactions supplied by DESs. The choline chloride-glycerol-based resin (DES¹-R) with the highest adsorption amounts was selected and the adsorption behavior of it was studied with static adsorption and the dynamic adsorption performance; the adsorption process followed Freundlich isotherm (R² ≥ 0.9337) and pseudo-second-order (R² ≥ 0.9951). The present DES¹-R-SPE method showed good linear range from 0.5 to100 μg mL^-1 (R² ≥ 0.9998), good recoveries of spiked milk samples (LEV, 96.7%; CIP, 101.5%), and satisfied repeatability for intra-day and inter-day (LEV, RSD≤5.4%; CIP, RSD≤4.6%).

A density-tunable liquid-phase microextraction system based on deep eutectic solvents for the determination of polycyclic aromatic hydrocarbons in tea, medicinal herbs and liquid foods

A novel density-tunable liquid-phase microextraction (DT-LPME) system was developed with high-density deep eutectic solvents (DESs) as extractant and low-density organic solvents as emulsifier and density regulator. DES-rich phase was induced to form in the bottom or in the top by adjusting the emulsifier amount. This system was used to directly extract polycyclic aromatic hydrocarbons (PAHs) from liquid and solid foods, and the obtained DES-rich phase was easy to be collected for quantification. The method (LPME with HPLC-fluorescence detector) has linearity (R² > 0.9974), detection limits of 0.6-4.2 ng L^-1 for liquid foods and 0.05-0.35 ng g^-1 for solid foods, recoveries of 86.2-114.9%, and intra-day/inter-day RSDs below 6.6%. The method was applied to detect PAHs in real samples, and the PAHs residue was found in honey and five solid foods. The DT-LPME method is simple, fast, green and suitable for direct extraction of analytes from both liquid and solid samples.

Restricted access supramolecular solvent based magnetic solvent bar liquid-phase microextraction for determination of non-steroidal anti-inflammatory drugs in human serum coupled with high performance liquid chromatography-tandem mass spectrometry

A hexafluroisopropanol (HFIP)-alkanol supramolecular solvent (SUPRAS) based magnetic solvent bar (MSB) liquid-phase microextraction (LPME) method was proposed for extraction of non-steroidal anti-inflammatory drugs (NSAIDs, including ketoprofen, naproxen, indomethacin and diclofenac) in human serum. The restricted access HFIP-alkanol SUPRAS was prepared by injecting a mixture of HFIP and alkanol into water. A stainless-steel needle was inserted into a piece of hollow fiber to prepare a magnetic bar. Then the magnetic bar was dipped in SUPRAS to impregnate the wall pores of the hollow fiber, followed by placing it into the serum sample for extraction. Only 4 μL of SUPRAS was consumed per bar. The MSB not only functioned for stirring, but also played the role of extraction and magnetic separation. Under the optimal extraction conditions (seven MSBs, extraction time 33 min and stirring rate 730 rpm), which was obtained by one variable-at-a-time and response surface methodology, the novel MSB-LPME was coupled with high performance liquid chromatography-tandem mass spectrometry to determine NSAIDs in human serum. The method showed a good linear relationship (correlation coefficients ≥ 0.9939). Method limits of detection and method limits of quantitation were in the range of 0.25-0.95 μg L^-1 and 0.83-3.16 μg L^-1, respectively. The recoveries for the spiked human serum samples ranged from 86.8% to 125.1% with intra- and inter-day relative standard deviations less than 9.2% and 18.1%, respectively. Moreover, the method did not require a protein precipitation step, and matrix effects of 72.8%-117.7% showed little interference with mass spectrometry detection, which was due to the double cleanup provided by the restricted access property of SUPRAS and the filtration capacity of hollow fiber. The HFIP-alkanol SUPRAS-based MSB-LPME method proved to be simple, highly efficient and environment-friendly for the pretreatment of serum/plasma.

Terminal-conjugated non-aggregated constraints of gold nanoparticles on lateral flow strips for mobile phone readouts of enrofloxacin

Antibiotics abuse now poses a global threat to public health. Monitoring their residual levels as well as metabolites are of great importance, still challenges remain in in situ tracing during the circulation. Herein, taking the typical antibacterial Enrofloxacin (ENR) as a subject, a paper-based aptasensor was tailored by manipulating a duo of aptameric moieties to "sandwich" the target in a lateral-flow regime. To visualize the tight-binding sandwich motif more vividly, an irregular yet robust DNA-bridged gold nanoparticles (AuNPs) proximity strategy was developed with recourse to terminal deoxynucleotidyl transferase, of which the nonaggregate constraining feature was unveiled via optical absorption and scanning probe topography. This complex performed exceptionally better in the test strip context than single-particle tags, leading to an enhanced on-chip focusing. Rather than qualitative color developing, further efforts were taken to visualize the readouts in a quantitative manner by exploiting the smartphone camera for pattern recognition along with data processing in a professional App. Overall, this prototyped contraption realized a rapid and ultrasensitive quantification of ENR down to 0.1 μg/L along with a broad linear range over 5 orders of magnitude, plus excellent selectivity and precision even for real samples. Such innovative fusion across DNA-structured nanomanufacturing and intelligent perception provides a prospective and invigorating solution to point-of-care inspection.

High-Throughput and High-Efficient Micro-solid Phase Extraction Based on Sulfonated-Polyaniline/Polyacrylonitrile Nanofiber Mats for Determination of Fluoroquinolones in Animal-Origin Foods

We herein describe a high-throughput 96-well plate micro-solid phase extraction sample preparation technique based on novel sulfonated-polyaniline/polyacrylonitrile nanofiber mats (sulfonated-PANI/PAN NFMs) for multiresidue detection of fluoroquinolones (FQs) in various animal-origin food samples. Through the double-modification of polyaniline and sulfonic acid, the resulting functionalized sulfonated-PANI/PAN NFMs present high extraction efficiency for FQs. Compared with the existing methods, this approach demonstrates its advantages of being suitable for more sample matrices (milk, animal muscle, liver, kidney, and egg), lower sample amount (0.5 g), lower sorbent requirement (5.0 mg), lower volume of organic solvent (0.7 mL), shorter time (0.2 min per sample), and high sensitivity (0.012-0.06 μg·kg^-1). In addition, sulfonated-PANI/PAN NFMs possess excellent reusability which could be reused 10 times without an obvious decrease in extraction efficiency. Combined with ultra performance liquid chromatography-tandem mass spectrometry, the novel sample preparation technique can be expected as an efficient method for routine trace FQ residue monitoring in animal-origin food samples.

Preparation of highly fluorinated and boron-rich adsorbent for magnetic solid-phase extraction of fluoroquinolones in water and milk samples

Effective extraction is an indispensable procedure for the sensitive analysis of fluoroquinolones (FQs) in complex samples. According to the molecular properties of FQs, a new highly fluorinated and boron-rich adsorbent (FBA) was synthesized and employed as the extraction phase of magnetic solid-phase extraction (MSPE). Results revealed that the prepared FBA displayed satisfactory extraction capability for FQs through fluorophilic and B-N coordination interactions. Besides, the synthesized FBA also exhibited strong magnetic responsiveness and good life-span. Under the most favorable conditions, the FBA/MSPE was combined with high-performance liquid chromatography with diode array detection (HPLC-DAD) to sensitively quantify trace levels of FQs in environmental water and milk samples. The developed approach showed good linearity within the studied concentration range, satisfactory precision and low limits of detection (0.0049-0.016 μg/L for water sample and 0.010-0.046 μg/kg for milk sample). In the analysis of target FQs in real samples, the recoveries of different fortified concentrations were in the ranges of 80.1-120% and 78.9-119% for water and milk samples, respectively. The relative standard deviations for reproducibility were all below 11%. The results well evidence that the introduced FBA/MSPE is a promising extraction technology for FQs, and the established FBA/MSPE-HPLC/DAD approach is suitable to measure low concentrations of FQs in water and milk samples.

Metal-organic framework-monolith composite-based in-tube solid phase microextraction on-line coupled to high-performance liquid chromatography-fluorescence detection for the highly sensitive monitoring of fluoroquinolones in water and food samples

In this study, a new metal-organic framework-monolith composite for in-tube solid phase microextraction phase (IT-SPME) of fluoroquinolones (FQs) was prepared. 4-Vinylbenzoic acid was copolymerized with ethylenedimethacrylate in a fused silica capillary to form porous monolith. After that, zeolitic imidazolate frameworks (ZIF-8) were synthesized in situ within the pores and the surface of the monolith by controlled layer-by-layer self-assembly of Zn²⁺ and imidazole. The introduction of ZIF-8 enhanced the surface area of monolith composite, and thus, improving the extraction performance of IT-SPME for FQs obviously. Under the optimized conditions, a highly sensitive method for the monitoring of FQs residue in water and honey samples was developed by the on-line combination of IT-SPME with high-performance liquid chromatography with fluorescence detection (HPLC-FLD). The limits of detection (S/N = 3) for the targeted FQs in water and honey samples were as low as 0.14-0.61 ng/L and 0.39-1.1 ng/L, respectively. The relative standard deviations (RSDs) for intra-day and inter-day assay variability were less than 10% in all samples. The established on-line IT-SPME-HPLC-FLD was successfully used to detect ultra-trace FQs in environmental water and honey samples. Recoveries at different spiked concentrations ranged from 80.1% to 119% and 80.2-117% for water and honey samples, respectively, with satisfactory reproducibility. Compared to up-to-date reported methods, the proposed approach exhibits some features such as high sensitivity, convenience, partial automation, low consumptions of sample and solvent.

Hexafluoroisopropanol/Brij-35 based supramolecular solvent for liquid-phase microextraction of parabens in different matrix samples

A novel supramolecular solvent (SUPRAS) based on hexafluoroisopropanol (HFIP)/Brij-35 was proposed for liquid-phase microextraction (LPME) of parabens in water samples, pharmaceuticals and personal care products. Brij-35 is a cost-effective and non-toxic non-ionic surfactant, but it has a high cloud point (>100 °C). HFIP, with the features of strong hydrogen-bond donor, high density and powerful hydrophobicity, was used as the cloud point-reducing agent and self-assembling and density-regulating solvent of Brij-35. Upon adding HFIP into the Brij-35 aqueous solution, the cloud point of Brij-35 was decreased to below room temperature, and the SUPRAS was formed in the bottom over a wide range of HFIP and Brij-35 concentrations at room temperature. The SUPRAS was composed of Brij-35, HFIP and water, having a density larger than water, and it showed a large spherical structure of positive micellar aggregates (2-8 μm). The HFIP/ Brij-35 SUPRAS-based LPME procedure was non-thermodependent and could be performed at room temperature with centrifugation using normal centrifuge tubes, being very simple. In the extraction of six parabens, the HFIP/ Brij-35 SUPRAS-based LPME method showed short extraction time (3.3 min), low solvent consumption (0.3 mL), and large enrichment factor (26-193). The method of HFIP/ Brij-35 SUPRAS-based LPME with HPLC-DAD gave good linearity for the quantification of parabens with correlation coefficients larger than 0.9990. The limits of detection based on a signal-to-noise ratio of 3 were from 0.042 to 0.167 μg L^-1. The recoveries for the spiked real samples were in the range of 90.2-112.4% with relative standard deviation less than 8.9%. Except for tap water, one or several paraben (s) were detected in all the other real samples.