Lipase-catalyzed glycerolysis of anchovy oil in a solvent-free system: Simultaneous optimization of monoacylglycerol synthesis and end-product oxidative stability

Preparation of diacylglycerol by lipase-catalyzed glycerolysis in the presence of polar adsorption materials

Diacylglycerol (DAG) is a functional oil used extensively in various industries. Glycerolysis of a natural oil with glycerol was widely employed for DAG preparation. Numerous studies have demonstrated that glycerol in the reaction affects lipase performance. We hypothesized that adsorption of glycerol onto an adsorbent might decrease effect of glycerol on lipase activity. To test the hypothesis, the role of silica gel in the enzymatic glycerolysis for DAG preparation was first investigated. The results showed that four type of lipases had better performances in the system containing silica gel. Subsequently, polar adsorbent type was screened. The results indicated that Amberlite FPA54 resin modified with tertiary amine groups significantly improved catalytic efficiency of Lipozyme TL IM. Under optimized conditions, DAG content in the glycerolysis products reached 51.3 %. A novel finding in this study is that type and polarity of adsorbent have significant effect on catalytic performance of lipase in the glycerolysis.

In vitro digestion study comparing a predigested glycerolysis product versus long-chain polyunsaturated fatty acid-rich oils (LCPUFA) as a strategy for administering LCPUFA to preterm neonates

BACKGROUND & AIMS

Maintaining an adequate supply of arachidonic acid (ARA) and docosahexaenoic acid (DHA) is essential for optimal growth of preterm infants. This study aims to evaluate and compare the digestibility and bioaccessibility of ARA and DHA oils compared to their predigested product through an in vitro digestion model.

METHODS

An in vitro gastrointestinal digestion model was used in two stages: gastric digestion and intestinal digestion. Samples of two polyunsaturated rich oils (ARA and DHA oils) and their predigested product (2:1, ARA: DHA) produced by enzymatic glycerolysis have been digested for 120 min. The final digestion product obtained was composed of three phases: an upper oily phase (OP) containing the undigested species, an intermediate micellar phase (MP) containing digested and bioaccessible lipids, and a precipitate phase (PP) with insoluble compounds. The reaction was monitored by taking aliquots and their subsequent lipid extraction and analysis.

RESULTS

Poorer digestibility for ARA and DHA oils was observed based on the percentage of the oily phase (26.7% and 20%, respectively) found compared to the glycerolysis product (GP) oily phase (13.9%). The highest micellar phase was found in the GP (approx. 83%). On the other hand, the monoglyceride (MAG) content was lower in the digestion product (DP) from ARA and DHA oils, 4.3% and 9.2%, respectively, compared to the MAG observed in the DP of GP (15%).

CONCLUSION

Considering the percentage of oily phase, micellar phase, and the MAG content, it can be concluded that the GP is more digestible and ARA and DHA are more bioaccessible than in its precursor oils.

Structuring vegetable oils through enzymatic glycerolysis for water-in-oil emulsions

Enzymatic glycerolysis is a biotechnological process for structuring vegetable oils. This study investigates the kinetics of glycerolysis of peanut oil and explores the potential of the resulting structured oil to enhance the physical stability of water-in-oil emulsions. Using a 1:1 glycerol-to-oil molar ratio and 4 % lipase B from Candida antarctica as a catalyst, the reaction was conducted at 65 °C with stirring at 400 rpm. Acylglyceride fractions changes were quantified through NMR and DSC. Fat crystal formation was observed using scanning electron microscopy. The results revealed a first-order decay pattern, converting triglycerides into monoacylglycerides and diacylglycerides in less than 16 h. Subsequently, water-in-oil emulsions prepared with glycerolized oil showed augmented stability through multiple light scattering techniques and visual assessment. The structured oils effectively delayed phase separation, highlighting the potential of glycerolysis in developing vegetable oil-based emulsions with improved functional properties and reduced saturated fatty acid content.

Lipase-catalyzed solvent-free synthesis of monoglycerides from biodiesel-derived crude glycerol: Optimized using response surface methodology

The growth of the biodiesel industry has resulted in significant quantity of crude glycerol. It is necessary to explore the synthesis of high-value-added products from crude glycerol. In this study, the enzymatic synthesis of monoglycerides under solvent-free conditions, employing crude glycerol as the primary feedstock, had been investigated. The analysis showed that the highest yield of monoglycerides was obtained after 12 h, and Novozym 435 showed the highest monoglyceride yield of 18.41 % among the three lipases tested, followed by Lipozyme TL IM and Lipozyme RM IM. Monoglycerides were synthesized from biodiesel-derived crude glycerol using Novozym 435 as the catalyst under solvent-free conditions at different parameters, which were catalyst concentration, substrate molar ratio, and temperature. The yield of monoglycerides was examined in single-factor experiments. Response surface methodology (RSM) was subsequently employed to optimize the synthesis conditions based on the single-factor experimental results. The optimal conditions were at an enzyme concentration of 12.7 wt% and a molar ratio of crude glycerol:oil of 5.7:1 at a reaction temperature of 65.2 °C. The experimental yield of monoglycerides under the optimal conditions was 28.93 %, which is close to the value predicted from the RSM model (29.02 %).

Fermentative Production of Diacylglycerol by Endophytic Fungi Screened from Taxus chinensis var. mairei

Diacylglycerol (DAG) production by microbial fermentation has broad development prospects. In the present study, five endophytic fungi which could accumulate DAG were screened from Taxus chinensis var. mairei by using potato dextrose agar plate and flask cultivation in potato dextrose broth culture medium. The strains were biologically identified based on morphological features and semi-quantitative PCR. The identification results indicated that the five strains belonged to different genera: Fusarium annulatum (F. annulatum, coded as MLP41), Trichoderma dorotheae (T. dorotheae, coded as MLG23), Colletotrichum aeschynomenes (C. aeschynomenes, coded as MLY23), Pestalotiopsis scoparia (P. scoparia, coded as MLY31W), and Penicillium cataractarum (P. cataractarum, coded as MLGP11). The crude lipids from the strains and their corresponding triacylglycerol, 1,2-DAG, and 1,3-DAG fractions separated via thin-layer chromatography were mainly composed of palmitic acid, stearic acid, oleic acid, and linoleic acid, which in total accounted for higher than 94% of the content. The effects of fermentation conditions on the DAG productivity were discussed, and the yields of DAG were determined based on the ¹H NMR spectra of crude lipids. The highest total DAG yields of F. annulatum, T. dorotheae, C. aeschynomenes, P. scoparia, and P. cataractarum were 112.28, 126.42, 189.87, 105.61, and 135.56 mg/L, respectively. C. aeschynomenes had the strongest potential to produce DAG. The results showed that this may be a new promising route for the production of DAG via fermentation by specific endophytic fungi, such as C. aeschynomenes.

Continuous production of monoacylglycerol via glycerolysis of babassu oil by immobilized Burkholderia cepacia lipase in a packed bed reactor

This study investigated the glycerolysis of babassu oil by Burkholderia cepacia lipase immobilized on SiO₂-PVA particles in a continuous packed bed reactor. Experiments were conducted in a solvent-free system at 273.15 K either in an inert atmosphere or in the presence of cocoa butter to prevent lipid oxidation. The reactor (15 × 55 mm) was run at a fixed space time of 9.8 h using different molar ratios of babassu oil to glycerol (1:3, 1:6, 1:9, 1:12, and 1:15) to assess the effects of reactant molar ratio on monoacylglycerol productivity and selectivity. Nitrogen atmosphere and cocoa butter were equally effective in inhibiting lipid oxidation, indicating that addition of cocoa butter to glycerolysis reactions may be an interesting cost-reduction strategy. An oil/glycerol molar ratio of 1:9 resulted in the highest productivity (52.3 ± 2.9 mg g^-1 h^-1) and selectivity (31.5 ± 1.8%). Residence time distribution data were fitted to an axial dispersion model for closed-vessel boundary conditions, giving a mass transfer coefficient (k_c) of 3.4229 × 10^-6 m s^-1. A kinetic model based on elementary steps of the studied reaction was written in Scilab and compared with experimental data, providing standard deviations in the range of 5.5-7.5%.

An Effective Strategy for the Production of Lauric Acid-Enriched Monoacylglycerol via Enzymatic Glycerolysis from Black Soldier Fly (Hermetia illucens) Larvae (BSFL) Oil

Here, we developed an efficient strategy for the production of lauric acid-enriched monoacylglycerol (MAG) via enzymatic glycerolysis using black soldier fly (Hermetia illucens) larvae (BSFL) oil. The effects of the substrate molar ratio, reaction temperature, type of immobilized lipase, and organic solvent on the MAG content and conversion degree of BSFL oil were optimized. The maximum substrate conversion rate (97.88%) and MAG content (70.84%) were obtained in a tert-butanol system at 50 °C with a glycerol/BSFL oil molar ratio of 4:1 by using immobilized MAS1 lipase as a catalyst. The MAG content in the purified product reached 97.7%, with lauric acid accounting for 50.2%. Improved oxidation stability was observed after glycerolysis. Overall, this study provides a new strategy for the preparation of lauric acid-enriched MAG from BSFL oil.

Effect of Solvent on Acyl Migration of 2-Monoacylglycerols in Enzymatic Ethanolysis

Acyl migration occurs in many reactions and is the main obstacle for structured lipid synthesis. In this study, 2-monoacylglycerol (2-MAG) was prepared by enzymatic ethanolysis in three different media to evaluate the effect of environment on product composition. The contents of 2-MAG obtained in ethanol, hexane + ethanol, and t-butanol + ethanol systems were 30.6, 15.7, and 32.4%, respectively, after 3 h reaction. Afterward, the acyl migration kinetics of 2-MAG were studied in solvent and solventless systems without the use of lipase. Results indicate that 2-MAG in the solventless system had the highest acyl migration rate. The isomerization was efficiently prevented by the use of polar solvents, especially t-butanol. The rate constants were shown to be the highest and activation energy values were the lowest in solventless systems. The novel finding in this study was that solvent had inhibitory effect on 2-MAG isomerization, but the nonpolar hexane had the lowest inhibition of acyl migration compared to other solvents.

Kinetics and Mechanism of Solvent Influence on the Lipase-Catalyzed 1,3-Diolein Synthesis

1,3-Diacylglycerol preparation has roused increasing attention in recent years as the 1,3-diacylglycerol-rich oils can suppress the deposition of visceral fat and prevent the body weight increasing. Lipozyme TL IM-mediated esterification of oleic acid with monoolein was effective for 1,3-diacylglycerol production. During the esterification process, the solvent shows obvious influence on the diolein synthesis as well as the 1,3-diolein production. This work investigated the related kinetics and mechanism of the solvent effect on the esterification and Lipozyme TL IM performance. The results indicated that both the esterification rate constant and the acyl migration rate constant positively correlated with the logP of the solvent, while the site specificity of lipase has negative correlation with solvent logP. The acylation toward the 2-position of 1-monoolein was more sensitive to the solvent logP compared to the 1-position of glycerides. Molecular dynamics simulation revealed that solvents with different logP influenced the structure of Lipozyme TL IM including RMSD, hydrogen bond, and radial distribution function to a large extent, which subsequently led to the catalytic activity and selectivity variation of the lipase.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.