Effect of pulsed light treatment on Listeria inactivation, sensory quality and oxidation in two varieties of Spanish dry-cured ham

Pulsed Light Treatment Effect on Color, Oxidative Stability, and Listeria monocytogenes Population of Sliced Mortadella

This study evaluated the effects of high-intensity pulsed light (PL) on sliced mortadella, assessing how the parameters pulse width (1260 to 2520 µs) and number of pulses (one to three) influence color, oxidative stability, and Listeria monocytogenes population. The different PL parameters generated a fluence ranging from 2.64 to 6.57 J/cm2 and irradiance ranging from 1046.9 to 1738.8 W/cm2. The PL slightly increased the temperature and pH of the samples, and this elevation was well correlated to the higher number of pulses and higher fluence. The color parameter a* was reduced while b* values increased after PL application, with these effects being more significant in treatments with a higher number of pulses and higher fluence. The highest values of TBARS were found in treatments with higher fluence (5.28 and 6.57 J/cm2), which were characterized by the attribute "oxidized color" in sensory evaluation. The different PL conditions reduced the count of L. monocytogenes by up to 1.44 Log CFU/cm2. The treatment with a pulse width of 1260 µs, two pulses, fluence of 4.38 J/cm2, and irradiance of 1738.3 W/cm2 achieved the same efficacy in pathogen reduction as the treatments with higher fluence. Moreover, these PL conditions had a minimal impact on the color and oxidative stability of mortadella, demonstrating an effective balance between microbiological safety and quality preservation.

Electromagnetic wave-based technology for ready-to-eat foods preservation: a review of applications, challenges and prospects

In recent years, the ready-to-eat foods market has grown significantly due to its high nutritional value and convenience. However, these foods are also at risk of microbial contamination, which poses food safety hazards. Additionally, traditional high-temperature sterilization methods can cause food safety and nutritional health problems such as protein denaturation and lipid oxidation. Therefore, exploring and developing effective sterilization technologies is imperative to ensure food safety and nutritional properties, and protect consumers from potential foodborne diseases. This paper focuses on electromagnetic wave-based pasteurization technologies, including thermal processing technologies such as microwave, radio frequency, and infrared, as well as non-thermal processing technologies like ultraviolet, irradiation, pulsed light, and photodynamic inactivation. Furthermore, it also reviews the antibacterial mechanisms, advantages, disadvantages, and recent applications of these technologies in ready-to-eat foods, and summarizes their limitations and prospects. By comparing the limitations of traditional high-temperature sterilization methods, this paper highlights the significant advantages of these pasteurization techniques in effectively inhibiting microbial growth, slowing lipid oxidation, and preserving food nutrition and flavor. This review may contribute to the industrial application and process optimization of these pasteurization technologies, providing an optimal choice for preserving various types of ready-to-eat foods.

A review of emerging applications of ultrasonication in Comparison with non-ionizing technologies for meat decontamination

Meat is highly susceptible to contamination with harmful microorganisms throughout the production, processing, and storage chain, posing a significant public health risk. Traditional decontamination methods like chemical sanitizers and heat treatments often compromise meat quality, generate harmful residues, and require high energy inputs. This necessitates the exploration of alternative non-ionizing technologies for ensuring meat safety and quality. This review provides a comprehensive analysis of the latest advancements, limitations, and future prospects of non-ionizing technologies for meat decontamination, with a specific focus on ultrasonication. It further investigates the comparative advantages and disadvantages of ultrasonication against other prominent non-ionizing technologies such as microwaves, ultraviolet (UV) light, and pulsed light. Additionally, it explores the potential of integrating these technologies within a multi-hurdle strategy to achieve enhanced decontamination across the meat surface and within the matrix. While non-ionizing technologies have demonstrated promising results in reducing microbial populations while preserving meat quality attributes, challenges remain. These include optimizing processing parameters, addressing regulatory considerations, and ensuring cost-effectiveness for large-scale adoption. Combining these technologies with other methods like antimicrobial agents, packaging, and hurdle technology holds promise for further enhancing pathogen elimination while safeguarding meat quality.

Nonthermal Sterilization of Animal-based Foods by Intense Pulsed Light Treatment

The consumption of meat has been increasing, leading to a dynamic meat and meat processing industry. To maintain the quality and safety of meat products, various technologies have been explored, including intense pulsed light (IPL) technology. Several factors affect the inactivation of microorganisms by IPL treatment, including light intensity (fluence), treatment duration, pulse frequency, and the distance between the lamp and the samples. Meat products have been studied for IPL treatment, resulting in microbial reductions of approximately 0.4-2.4 Log. There are also impacts on color, sensory attributes, and physico-chemical quality, depending on treatment conditions. Processed meat products like sausages and ham have shown microbial reductions of around 0.1-4 Log with IPL treatment. IPL treatment has minimal impact on color and lipid oxidation in these products. Egg products and dairy items can also benefit from IPL treatment, achieving microbial reductions of around 1-7.8 Log. The effect on product quality varies depending on the treatment conditions. IPL technology has shown promise in enhancing the safety and quality of various food products, including meat, processed meat, egg products, and dairy items. However, the research results on animal-based food are not diverse and fragmentary, this study discusses the future research direction and industrial application through a review of these researches.

Effect of rosemary addition on the sensorial and physicochemical qualities of dry-cured ham slices. Measurement of camphor transfer

This study determined the effect of three concentrations (R1: high, R2: medium and R3: low) of rosemary added to dry-cured ham slices vacuum packaged. pH and the colour parameters were evaluated at 0, 7, 14, 28 and 60 days of storage; visual appearance, odour, flavour and camphor content were assessed at days 7, 14, 28 and 60. The rosemary concentration changed the colour parameters, significantly altering the visual appearance (p < 0.001 at 7 and 14 days; p < 0.5 at day 28), but did not affect the pH, neither odour nor flavour. Nevertheless, significant differences were found with the time on R1 and R2 in odour (p < 0.01 and p < 0.001, respectively) and in flavour (p < 0.001). Camphor content was similar in all samples but changed over the time in R1 (p < 0.001) and R2 (p < 0.01). In conclusion, despite the differences observed, it is evident that the addition of this spice was to the liking of the panellists, in any of the concentrations used.

Volatile compounds from in vitro metabolism of seven Listeria monocytogenes isolates belonging to different clonal complexes

Microorganisms produce a wide variety of volatile organic compounds (VOCs) as products of their metabolism and some of them can be specific VOCs linked to the microorganism's identity, which have proved to be helpful for the diagnosis of infection via odour fingerprinting. The aim of this study was to determine the VOCs produced and consumed to characterize the volatile metabolism of seven isolates of different clonal complexes (CCs) of Listeria monocytogenes. For this purpose, dichloromethane extracts from the thioglycolate broth medium were analysed by gas chromatography coupled to mass spectrometry (GC/MS). Also, multivariate analyses were applied to the data obtained. Results showed that all the isolates of L. monocytogenes produced de novo isobutanol, 2-methyl-1-butanol, 3-methyl-1-butanol, 3-(methylthio)-1-propanol, acetic acid, isobutyric acid, butanoic acid, and isovaleric acid. Significant differences were found among isolates for the production amount of these volatiles, which allowed their differentiation. Thus, CC4 (ST-219/CT-3650) and CC87 (ST-87/CT-4557) showed an active volatile compounds metabolism with high consumption nitrogen and sulphur compounds and production of alcohols and acids, and CC8 (ST-8/CT-8813) and CC3 (ST-3/CT-8722) presented a less active volatile metabolism. Moreover, within the VOCs determined, huge differences were found in the production of butanol among the seven isolates analysed, being probably a good biomarker to discriminate among isolates belonging to different CCs. Hence, the analysis of volatile profile generated by the growth of L. monocytogenes in vitro could be a useful tool to differentiate among CCs isolates.

Partial Characterization of the Impact of Saffron on the Sensory and Physicochemical Quality Traits of Dry-Cured Ham

This study determined the effect of adding three concentrations of saffron (A: high, B: medium, and C: low) on vacuum-packaged dry-cured ham slices. The pH and the color coordinates were assessed at 0, 7, 14, 28 and 60 days of storage, and sensorial quality (visual appearance, odor and flavor) and safranal content were analyzed at 7, 14, 28 and 60 days. Saffron concentration did not significantly affect the pH or color (except in a* (redness) and b* (yellowness) at day 28; p < 0.001). Storage period affected pH values (p < 0.001) in all groups with a significant decline from day 28 (p < 0.05); the color coordinates showed a high stability (only L* (lightness) varied in the C group samples; p < 0.01). Sensorial quality did not vary with the time in any group. Significant differences were found among groups in visual appearance (p < 0.05) and flavor (p < 0.001) at day 14 and in odor at day 14, 28, and 60. In general, the C group samples obtained the highest scores. Safranal content varied significantly with the time in a different way in each group, with differences among groups at day 14 and 60 (p < 0.001).

Evaluation of Pulsed Light to Inactivate Brettanomyces bruxellensis in White Wine and Assessment of Its Effects on Color and Aromatic Profile

Brettanomyces bruxellensis is a wine spoilage yeast that could be inactivated by pulsed light (PL); however, this technology may induce changes in the quality of this alcoholic drink. The present research aimed to determine the potential of PL to inactivate B. bruxellensis inoculated in white wine and to assess the effect of this technology on the color and aromatic profile of the wine. For this, a cocktail of B. bruxellensis strains was inoculated into the wine and its inactivation by PL was determined and fitted to a microbial inactivation model. Along with this, the effect of PL on instrument-measured color, and the volatile compounds of the wine were evaluated by GC/MS and descriptive sensory analysis, respectively. B. bruxellensis was inactivated according to the Geeraerd model including the tail effect, with a maximum inactivation of 2.10 log reduction at 10.7 J/cm²; this fluence was selected for further studies. PL affected wine color but the total color difference was below the just noticeable difference at 10.7 J/cm². The concentration of 13 out of 15 volatile compounds decreased due to the PL, which was noticeable by the panel. It is not clear if these compounds were photolyzed or volatilized in the open reactor during treatment. In conclusion, PL is able to inactivate B. bruxellensis in white wine but the treatment impairs the volatile profile. The use of a closed reactor under turbulent flow is recommended for disaggregating yeast clumps that may cause the tailing of the inactivation curve, and to avoid the possible escape of volatile compounds during treatment.

Pulsed Light: Challenges of a Non-Thermal Sanitation Technology in the Winemaking Industry

Pulsed light is an emerging non-thermal technology viable for foodstuff sanitation. The sanitation is produced through the use of high energy pulses during ultra-short periods of time (ns to µs). The pulsed light induces irreversible damages at the DNA level with the formation of pyrimidine dimers, but also produces photo-thermal and photo-physical effects on the microbial membranes that lead to a reduction in the microbial populations. The reduction caused in the microbial populations can reach several fold, up to 4 log CFU/mL decrement. A slight increase of 3 to 4 °C in temperature is observed in treated food; nonetheless, this increase does not modify either the nutritional properties of the product or its sensory profile. The advantages of using pulsed light could be used to a greater extent in the winemaking industry. Experimental trials have shown a positive effect of reducing native yeast and bacteria in grapes to populations below 1–2 log CFU/mL. In this way, pulsed light, a non-thermal technology currently available for the sanitation of foodstuffs, is an alternative for the reduction in native microbiota and the later control of the fermentative process in winemaking. This certainly would allow the use of fermentation biotechnologies such as the use of non-Saccharomyces yeasts in mixed and sequential fermentations to preserve freshness in wines through the production of aroma volatile compounds and organic acids, and the production of wines with less utilization of SO2 in accordance with the consumers’ demand in the market.