Construction of covalent triazine-based frameworks and application to solid phase microextraction of polycyclic aromatic hydrocarbons from honey samples

Insecticidal potential and risk assessment of diamide pesticides against Spodoptera frugiperda in maize crops

The effectiveness, tolerance, and safety of pesticides must be established before their scientific or rational. This study evaluates the field control efficacy of broflanilide, tetraniliprole, and chlorantraniliprole in combating Spodoptera frugiperda in maize crops, as well as the resistance of S. frugiperda to these three diamide pesticides after exposure. By assessing field control efficiency, toxicity, effects on development and reproduction, and detoxification enzyme activity of these diamide pesticides on S. frugiperda, highlights broflanilide's significant insecticidal potential. A highly sensitive and efficient method using QuEChERS/HPLCMS/MS was developed to simultaneously detect residues of these three pesticides on maize. Initial concentrations of broflanilide, tetraniliprole, and chlorantraniliprole ranged from 2.13 to 4.02 mg/kg, with their respective half-lives varying between 1.23 and 1.51 days. Following foliar application, by the time of harvest, the terminal residue concentrations of these pesticides were all under 0.01 mg/kg. Chronic dietary intake risk assessments and cumulative chronic dietary exposure for three pesticides indicated that the general population's terminal residue concentration was within acceptable limits. Not only does this research provide valuable insights into field control efficiency, insecticidal effects, resistance, residues, and risk assessment results of broflanilide, tetraniliprole, and chlorantraniliprole on maize, but additionally, it also paves the way for setting suitable Maximum Residue Limits (MRLs) values based on pre-harvest interval values, rational dosage, and application frequency.

Solid-phase microextraction - a future technique in pharmacology and coating trends

Traditional sample preparation techniques based on liquid-liquid extraction (LLE) or solid-phase extraction (SPE) often suffer from a major error due to the matrix effects caused by significant co-extraction of matrix components. The implementation of a modern extraction technique such as solid-phase microextraction (SPME) was aimed at reducing analysis time and the use of organic solvents, as well as eliminating pre-analytical and analytical errors. Solid-phase microextraction (SPME) is an innovative technique for extracting low molecular weight compounds (less than 1500 Da) from highly complex matrices, including biological matrices. It has a wide range of applications in various types of analysis including pharmaceutical, clinical, metabolomics and proteomics. SPME has a number of advantages over other extraction techniques. Among the most important are low environmental impact, the ability to sample and preconcentrate analytes in one step, simple automation, and the ability to extract multiple analytes simultaneously. It is expected to become, in the future, another method for cell cycle research. Numerous available literature sources prove that solid-phase microextraction can be a future technique in many scientific fields, including pharmaceutical sciences. This paper provides a literature review of trends in SPME coatings and pharmacological applications.

Nitrogen-rich covalent organic framework as a practical coating for effective determinations of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are high-profile organic pollutants to be poisonous, carcinogenic, and mutagenic, and widely distributed at trace levels in the environment. In order to effectively enrich PAHs, two stable covalent organic frameworks (COFs, TAPT-OMe-PDA and TPB-DMTP) were prepared by combining 2,4,6-tri(4-aminophenyl)-1,3,5-triazine (TAPT) and 1,3,5-tri(4-aminophenyl) benzene (TAPB) with 2,5-dimethoxy-phenyl-1,4-diformaldehyde (OMe-PDA), respectively. Even though the surface area of TAPT-OMe-PDA was much lower than that of TPB-DMTP, it still demonstrated much better extraction efficiencies towards PAHs as the solid phase microextraction (SPME) coating. Therefore, the TAPT-OMe-PDA coated fiber was coupled with gas chromatography-mass spectrometry (GC-MS) to establish a practical and sensitive method, after the extraction parameters (extraction time, extraction temperature, desorption temperature, desorption time, salt concentration and pH) were optimized. This developed analytical method showed wide linear ranges, low limits of detection, good repeatability and reproducibility. Finally, five PAHs in three water samples were detected and quantified precisely (2.72-38.7 ng·L-1) with satisfactory recoveries (88.3%-118%).

Dissipation and Safety Analysis of Dimethomorph Application in Lychee by High-Performance Liquid Chromatography-Tandem Mass Spectrometry with QuEChERS

This study presents a method for analyzing dimethomorph residues in lychee using QuEChERS extraction and HPLC-MS/MS. The validation parameters for this method, which include accuracy, precision, linearity, and recovery, indicate that it meets standard validation requirements. Following first-order kinetics, the dissipation dynamic of dimethomorph in lychee was determined to range from 6.4 to 9.2 days. Analysis of terminal residues revealed that residues in whole lychee were substantially greater than those in the pulp, indicating that dimethomorph residues are predominantly concentrated in the peel. When applied twice and thrice at two dosage levels with pre-harvest intervals (PHIs) of 5, 7, and 10 days, the terminal residues in whole lychee ranged from 0.092 to 1.99 mg/kg. The terminal residues of the pulp ranged from 0.01 to 0.18 mg/kg, with the residue ratio of whole lychee to pulp consistently exceeding one. The risk quotient (RQ) for dimethomorph, even at the recommended dosage, was less than one, indicating that the potential for damage was negligible. This study contributes to the establishment of maximum residue limits (MRLs) in China by providing essential information on the safe application of dimethomorph in lychee orchards.

Application of magnetic dispersive solid phase extraction combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction and GC-MS in the extraction and determination of polycyclic aromatic hydrocarbons in honey

A magnetic dispersive solid phase extraction method combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction has been validated for the extraction of polycyclic aromatic hydrocarbons from honey samples. For this purpose, a carbonised cellulose-ferromagnetic nanocomposite was used as a sorbent through the magnetic dispersive solid phase extraction. For preparation of the sorbent, first, carbonised cellulose nanoparticles were created by treating cellulose filter paper with concentrated solution of sulfuric acid. Then, the prepared nanoparticles were loaded onto Fe3O4 nanoparticles through coprecipitation. In the extraction process, first, a few mg of the sorbent was added to the diluted honey solution and dispersed in it using vortex agitation. The particles were then separated and the adsorbed analytes were eluted with an organic solvent. The eluent was taken and after mixing with a water-immiscible extraction solvent was used in the following solidification of floating organic droplet-based dispersive liquid-liquid microextraction procedure. By performing the extraction process under the obtained optimum conditions, low limits of detection (0.08-0.17 ng g-1) and quantification (0.27-0.57 ng g-1), satisfactory precision (relative standard deviations ≤ 5.0%), and wide linear range (0.57-500 ng g-1) with great coefficients of determination (r2≥ 0.9986) were obtained.

Research progress of the combination of COFs materials with food safety detection

Covalent organic frameworks (COFs) have received lots of attention due to their multiple advantages such as high specific surface area, controlled pore size, and excellent stability. When detecting food contaminants, the matrix effect brought by complex food samples can significantly affect the accuracy of the results. How to attenuate matrix effect has always been a major challenge. Utilizing the advantages of COFs and applying them to detect food contaminants is currently a key research direction. The aim of this work is to provide a systematic summary of sample pretreatment techniques and detection techniques combined with COFs, which include almost all current techniques combined with COFs. In addition, the principles of combining COFs with different techniques are explained. Finally, the research foci and development direction of COFs in food contaminant detection are discussed. This is an important reference for the future development of food safety and the design of COFs.

Preparation of black phosphorus nanosheets/ zeolitic imidazolate framework nanocomposite for high-performance solid-phase microextraction of organophosphorus pesticides

Design and preparation of new fiber coatings for solid-phase microextraction (SPME) is of significance to the sample preparation techniques. Herein, a facile strategy has been developed for the integration of the black phosphorus (BP) nanosheets with metal-organic framework (ZIF-8) to generate a BP/ZIF-8 nanocomposite. For the first time, the newly-synthesized BP/ZIF-8 nanocomposite was adopted as the SPME fiber coating for the extraction of organophosphorus pesticides (OPPs). Under the optimized conditions, the BP/ZIF-8 based SPME method gained acceptable linearity (0.04-20 µg L-1), low limits of detection (0.012-0.051 µg L-1) and good repeatability (3.2-8.1%). Coupled with gas chromatography-mass spectrometric detection, the developed SPME method was successfully used for the preconcentration of OPPs from environmental waters with the method recoveries from 92.0%-103.8%. This method offers a good alternative for the analysis of trace OPPs in environmental water samples.

Online solid-phase extraction based on size-controllable spherical covalent organic framework for efficient determination of polybrominated diphenyl ethers in foods

An analytical method of microspheric brominated covalent organic framework (Br-COF)-online solid-phase extraction integrated with high-performance liquid chromatography (online SPE-HPLC) was proposed for efficiently enriching six polybrominated diphenyl ethers (PBDEs) in foods. The Br-COF microspheres were facilely prepared with uniformity and dispersion by a size-controllable synthesis at the room temperature. Attributed to multiple interactions of the halogen bonding, Van der Waals forces, hydrophobic interaction along with size-matching effect, Br-COF performed satisfactory extraction capacity for PBDEs compared with commercial adsorbents. Five primary influencing factors were optimized, including loading solvent, loading flow rate, elution solvent, elution flow rate and elution volume. Under the optimal parameters, the implement displayed excellent linear ranges (0.5-500 ng mL^-1) and low detection limits (0.01-0.05 ng mL^-1). The relative recoveries in six spiked food samples ranged from 87.8 to 119.7 % with relative standard deviations below 10 %. This research estabished a promising platform for quantitatively determining trace PBDEs in complex foods.

Dissipation Dynamic, Residue Distribution and Risk Assessment of Emamectin Benzoate in Longan by High-Performance Liquid Chromatography with Fluorescence Detection

A derivatization method combined with high-performance liquid chromatography-fluorescence detection (HPLC-FLD) was used to evaluate the dissipation, residue distribution and risk assessment of emamectin benzoate in whole longan and pulp. The average recoveries were 82-111% with relative standard deviation (RSD) less than 11%. The limit of quantification (LOQ) was 0.001 mg/kg in longan and pulp. The half-lives were 3.3-4.2 days. The terminal residues in whole longan were <0.001-0.025 mg/kg applied two and three times at two levels of dosage with PHIs of 10, 14, and 21 days. The residues in whole longan had a higher quantity than those in the pulp, and the terminal residues of pulp were all lower than LOQ (0.001 mg/kg). The chronic risk of emamectin benzoate was not negligible to humans depending on ADI% value, which was higher than 1; and the acute risk was acceptable to the consumer. This study could provide guidance for the safe use of emamectin benzoate in longan and serve as a reference for the establishment of maximum residue limits (MRLs) in China.

Magnetic solid-phase extraction based on GO/Fe3O4 coupled with UPLC-MS/MS for determining nitroimidazoles and their metabolites in honey

A magnetic graphene oxide (GO/Fe₃O₄) nanocomposite was synthesized in one step by a chemical coprecipitation method, which was further used for magnetic solid-phase extraction (MSPE). This study aimed to combine GO/Fe₃O₄ with ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to detect the nitroimidazoles (NDZs) and their three major metabolites in honey samples. GO/Fe₃O₄ was characterized by transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, and magnetic property measurement system (MPMS), and the influencing parameters such as adsorbent amount, pH of the dissolved sample solution, sample volume, type and volume of the eluent, shaking speed, and adsorption and desorption time were optimized. Under the optimized conditions, the limits of detection (LOD) and quantitation (LOQ) of the method were 0.003-0.08 μg kg^-1 and 0.009-0.3 μg kg^-1, respectively, with good linearity reported in the range of 0.5-20 μg kg^-1 (R² ≥ 0.9991). The average recoveries of 10 analytes were in the range of 66.0%-90.8% with relative standard deviations (RSD) lower than 6.9% (n = 6). The preparation of GO/Fe₃O₄ and the extraction process were convenient and rapid, and consumed small amounts of organic solvents. The optimized method was successfully applied for extracting NDZs and their three major metabolites from honey samples with good accuracy.

Recent Advances in the Application of Covalent Organic Frameworks in Extraction: A Review

Covalent organic frameworks (COFs) are a class of emerging materials that are synthesized based on the covalent bonds between different building blocks. COFs possess unique attributes in terms of high porosity, tunable structure, ordered channels, easy modification, large surface area, and great physical and chemical stability. Due to these features, COFs have been extensively applied as adsorbents in various extraction modes. Enhanced extraction performance could be reached with modified COFs, where COFs are presented as composites with other materials including nanomaterials, carbon and its derivatives, silica, metal-organic frameworks, molecularly imprinted polymers, etc. This review article describes the recent advances, developments, and applications of COF-based materials being utilized as adsorbents in the extraction methods. The COFs, their properties, their synthesis approaches as well as their composite structures are reviewed. Most importantly, suggested mechanisms for the extraction of analyte(s) by COF-based materials are also discussed. Finally, the current challenges and future prospects of COF-based materials in extraction methods are summarized and considered in order to provide more insights into this field.

Ionic liquid-functionalized poly-N-phenylpyrrole coated on a NiTi alloy substrate for highly efficient solid-phase microextraction

TiO2–NiO composite nanoflakes were in situ grown, followed by electrochemical polymerization of [C4MIM]PF6@PPPy as a fiber coating for solid phase microextraction.

Development of magnetic solid phase extraction using magnetic amphiphilic polymer for sensitive analysis of multi-pesticides residue in honey

A sensitive and time-saving method for the determination of multi-pesticide residues in honey was developed using magnetic solid phase extraction (MSPE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Magnetic polymer (N-vinyl pyrrolidone-divinyl benzene) (MVP-DB) was fabricated and employed as the adsorbent for extraction and enrichment of multi-pesticide residues in honey. MVP-DB contains lipophilic benzene ring, divinyl group, and hydrophilic pyrrolidone group. The good hydrophilic and hydrophobic structure of MVP-DB not only ensures sufficient dispersion in honey samples, but also enhances the ability to enrich target analytes. The predominant factors affecting the recoveries of analytes were systematically investigated, affording a rapid and highly efficient MSPE method. Under the optimal conditions, the method was verified, including the recovery, precision, linearity, sensitivity, and matrix effects. The results displayed that these pesticides showed good linearity in the range of 2-250 µg L^-1. The MLOQs were 0.5 µg kg^-1. The recoveries of pesticides in honey at the pre-spiked concentrations of 0.5-25 µg kg^-1 were 61.6%-112% with RSDs less than 18.2%. Hence, the developed method displayed good application prospect for the determination of multi-pesticide residues in honey samples.

Review of harmful chemical pollutants of environmental origin in honey and bee products

Honey is a natural food with many pro-health properties, which comprises a wide variety of valuable ingredients. It can also be the source of chemical contaminants of environmental origin, including POPs that can contribute to adverse health effects to human. Monitoring the degree of pollution of honey/bee products with hazardous chemicals is important from a nutraceutical point of view. In the present work, overview of recent literature data on chemical pollutants in honey/bee products originating from the environment was performed. Their MLs, MRLs and EDI were discussed. It can be concluded that huge amount of research concerned on the presence of TMs and pesticides in honey. Most of the studies have shown that honey/bee products sampled from urban and industrialized areas were more contaminated than these sampled from ecological and rural locations. More pollutants were usually detected in propolis and bee pollen than in honey. Based on their research and regulations, authors stated, that most of the toxic pollutants of environmental origin in honey/bee products are at levels that do not pose a threat to the health of the potential consumer. The greatest concern relates to pesticides and TMs, because in some research MLs in individual samples were highly exceeded.

Free Fatty Acid from Waste Palm Oil Functionalized Magnetic Nanoparticles Immobilized on Surface Graphene Oxide as a New Adsorbent for Simultaneously Detecting Hazardous Polycyclic Aromatic Hydrocarbons and Phthalate Esters in Food Extracts

A newly synthesized free fatty acids from waste palm oil functionalized magnetic nanoparticles immobilized on the surface of graphene oxide (FFA@MNP-GO) was successfully synthesized and characterized in this research. The combinations of long alkyl chain of free fatty acid with graphene oxide that consists of large delocalized 77-electron systems and abundant of hydrophilic groups with hydroxyl, epoxide and carboxylic groups offer the determination of simultaneous wide range of polarities of organic pollutants in real matrices through hydrogen bonding, hydrophobic and 77-77 interactions. The fabricated adsorbent was successfully applied as a magnetic solid phase extraction (MSPE) adsorbent for the simultaneous separation of selected phthalate esters (PAEs) and polycyclic aromatic hydrocarbons (PAHs) in apple and cabbage extracts prior to their high performance liquid chromatography with diode-array detector (HPLC-DAD) determination. Factors affecting the extraction efficiency such as amount of adsorbent, desorption solvent, volume of desorption solvent, extraction time, desorption time, pH and sample volume were investigated and optimized. The results revealed that under optimal conditions, the detection limit of selected PAEs and PAHs were in the range of 0.56-0.97 ng mL^-1 and 0.02-0.93 ng mL^-1, respectively. The spiked recoveries of real apple and cabbage extracts for PAEs and PAHs were in the range of 81.5-117.6% with good relative standard deviation (RSD) (n = 5) less than 10% and 86.7-118.2% with acceptable RSDs (n = 5) ranging from 1.5 to 11.0%, respectively. This study reported for the first time the use of MSPE procedure for simultaneous determination of chosen PAHs and PAEs in real samples including apple and cabbage extracts by using new adsorbent, FFA@MNP-GO.

Determination of sulfonamides in meat by monolithic covalent organic frameworks based solid phase extraction coupled with high-performance liquid chromatography-mass spectrometric

In this work, hierarchical porous covalent organic frameworks (HP-COFs) foam, named as HP-TpBD, was prepared by using 1,3,5-trimethylphloroglucinol (Tp) and benzidine (BD) as building blocks under the assistant of NaCl template. Its potential application as the sorbent for solid phase extraction (SPE) of sulfonamides (SAs) in meat products were explored by coupling with high performance liquid chromatography-mass spectrum (HPLC-MS) analysis. The key factors affecting extraction efficiency were well studied. Under the optimum conditions, the proposed method exhibited high preconcentration factors of 100, low limit of detection (0.10-0.23 μg/kg), and wide linear ranges (0.5-200 μg/kg). In addition, the determination of SAs in real samples were realized with satisfactory recoveries (82.8-119.9%), demonstrating the applicability of the proposed method. The easy operation, superior extraction affinity and good recycle performance demonstrated the resulting HP-COF foam is a promising adsorbent for the preconcentration of trace organic compounds from complex matrix.

A solid-phase microextraction fiber coating based on magnetic covalent organic framework for highly efficient extraction of triclosan and methyltriclosan in environmental water and human urine samples

Herein, we synthesized a kind of magnetic covalent organic framework nanohybrids (NiFe₂O₄@COF), and integrated it with polydimethyl siloxane and silicone rubber curing agent for solid phase microextraction (SPME) fiber coating. The fiber coating demonstrated a porous and uniform surface with the BET specific surface of 169.7 m² g^-1. As for seven environmental analytes, the NiFe₂O₄@COF-based SPME fiber coating gave the higher extraction recoveries for triclosan (TCS) and methyltriclosn (MTCS) than those of fenpropathrin, bifenthrin, permethrin, fenvalerate and deltamethrin. Several operational parameters were rigorously optimized, such as extraction temperature, extraction time, thermal desorption time, solution pH and salt effect. Combined with the GC-ECD detection, the newly developed microextraction method supplied the wide linear range of 0.1-1000 µg L^-1 with the correlation coefficients of > 0.9995. The limits of detection (LODs) and limits of quantitation (LOQs) reached as low as 1-7 ng L^-1 and 3.3-23 ng L^-1, respectively. The intra-day and inter-day precisions in six replicates (n = 6 ) were < 3.55% and < 5.06%, respectively, and the fiber-to-fiber reproducibility (n = 3) was < 7.64%. To evaluate its feasibility in real samples, the fortified recoveries for TCS and MTCS, at low (0.2 µg L^-1), middle (2.0 µg L^-1) and high (20.0 µg L^-1) levels, varied between 81.9% and 119.1% in tap, river and barreled waters as well as male, female and children urine samples. Especially, it is worth mentioning that the NiFe₂O₄@COF-based SPME coating fiber can be recycled for at least 150 times with nearly unchanged extraction efficiency. Moreover, the extraction recoveries by the as-fabricated fiber coating were much higher than those by three commercial fibers (PDMS, PDMS/DVB and PDMS/DVB/CAR). Overall, the NiFe₂O₄@COF-based SPME is a convenient, sensitive, efficient and "green" pretreatment method, thereby possessing important application prospects in trace monitoring of TCS-like pollutants in complex liquid matrices.

Triazine-based covalent organic polymer: A promising coating for solid-phase microextraction

Advancement of novel coating materials for solid-phase microextraction is highly needed for sample pretreatment. Herein, a triazine-based covalent organic polymer was constructed from the monomers of cyanuric chloride and trans-stilbene via the Friedel-Crafts reaction and thereafter used as a solid-phase microextraction fiber coating for the extraction of polycyclic aromatic hydrocarbons and their nitrated and oxygenated derivatives. The newly-developed solid-phase microextraction method coupled with gas chromatography/flame ionization detection gives enhancement factors of 548-1236 and limits of detection of 0.40-2.81 ng/L for the determination of polycyclic aromatic hydrocarbons and their derivatives. The one fiber precision for five replicate determinations of the analytes and the fiber-to-fiber precision with three parallel prepared fibers, expressed as relative standard deviations, was in the range of 4.6-9.4% and 6.2-10.9%, respectively. The relative recoveries of the analytes for environmental water samples were in the range of 88.6-106.4% with the relative standard deviations ranging from 4.0 to 11.7% (n = 5).

[Advances in construction of triazine-based porous organic polymers and their applications in solid phase microextraction]

三嗪基多孔有机材料(TPOPs)具有较大的比表面积、可调的孔道结构、较高的热和化学稳定性、丰富的π键体系等诸多优点,目前被广泛应用于气体储存、催化、能源转化和吸附等诸多领域。基于TPOPs的固相微萃取(SPME)技术近年来引起了人们的极大兴趣,成为样品前处理技术领域的研究热点之一。该文简要地综述了近年来TPOPs的合成方法及其在固相微萃取领域的应用与发展,并对该领域研究进行了展望。

Online extraction based on ionic covalent organic framework for sensitive determination of trace per- and polyfluorinated alkyl substances in seafoods by UHPLC-MS/MS

The ionic covalent organic framework (TPB-BFBIm-iCOF) was facilely synthetized by the size-controllable confinement method and chosen as the online solid phase extraction (SPE) adsorbent. This adsorbent showed fast adsorption equilibrium (5 min) and high adsorption capacity (87.7-140.8 mg g^-1) for the per- and polyfluorinated alkyl substances (PFASs). The TPB-BFBIm-iCOF microsphere revealed the satisfactory enrichment performance for PFASs by means of the electrostatic interaction, hydrophobic effect and ordered channel structure. After extraction, the loaded TPB-BFBIm-iCOF-online SPE column was eluted and applied to the ultrahigh performance liquid chromatography tandem mass spectrometry analysis. Under the optimum conditions, the method displayed satisfactory linearity (R² ≥ 0.9910) and low limits of detection (≤0.0017 ng g^-1) for five seafoods. The relative recoveries of PFASs were 85.3%-109.4% with the relative standard deviation ≤ 9.9%. The method exhibited potential value in monitoring the toxicokinetics and environmental behaviors of PFASs.

Construction of hypercrosslinked polymers for high-performance solid phase microextraction of phthalate esters from water samples

Design and synthesis of novel coatings for solid phase microextraction (SPME) is urgently needed for sample pretreatment. In this study, three hypercrosslinked polymers (HCPs) were constructed by the facile Friedel-Crafts alkylation reactions between tetraphenylethylene (TPE) and 1,4-bis(chloromethyl)benzene (BCMB), 4,4'-bis(chloromethyl)-1,1'-biphenyl (BCMBP), and cyanuric chloride (CC), respectively. The newly-synthesized HCPs were employed as SPME coatings for the extraction of phthalate esters (PAEs). Various parameters influencing the SPME efficiencies, including extraction time and temperature, ionic strength, stirring rate, desorption temperature and time were optimized. Under the optimal conditions, low limits of detection (0.003-0.033 μg L ^- 1), wide linearity (0.01-10 μg L ^- 1) and good repeatability (4.1-9.3%) were achieved. The HCPs-based SPME method was successfully applied for the determination of eight PAEs in environmental water and bottled water samples with recoveries from 75.3% to 116%. This method provides a good alternative for monitoring trace level of PAEs in water samples.