Rapid analytical approach for bioprofiling compounds with radical scavenging and antimicrobial activities from seaweeds

Screening and identification of antibacterial components in Artemisia argyi essential oil by TLC-direct bioautography combined with comprehensive 2D GC × GC-TOFMS

One of the primary components that contribute to Artemisia argyi 's effectiveness is essential oil, which has an exceptional antibacterial effect that has been well documented. The actual cause of its antibacterial activity and associated mechanism, however, are still not completely understood. For the first time, comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (2D GC × GC-TOFMS) and thin-layer chromatography-direct bioautography (TLC-DB) were employed to investigate its antibacterial components. The antibacterial properties of A. argyi essential oil were investigated, and the antibacterial activity of six compounds was evaluated, using Staphylococcus aureus (S. aureus) and Escherichia coli (E. coil) as test microorganisms. TLC-direct bioautography was used to screen two bioactive clusters. Following 2D GC × GC-TOFMS identification of bioactive clusters, six compounds were evaluated for in vitro antibacterial activity verification. All the components tested displayed antibacterial action. Results showed that α-terpineol and eugenol had high potent antibacterial activity (MIC＜0.62 mg/mL, IC50＜2.00 mg/mL). For complex essential oils from traditional Chinese medicine, this method is efficient for quick screening and identifying antibacterial compounds.

Anticholinesterase Activity of Budmunchiamine Alkaloids Revealed by Comparative Chemical Profiling of Two Albizia spp., Molecular Docking and Dynamic Studies

Alzheimer's disease remains a global health challenge and an unmet need requiring innovative approaches to discover new drugs. The current study aimed to investigate the inhibitory activity of Albizia lucidior and Albizia procera leaves against acetylcholinesterase enzyme in vitro and explore their chemical compositions. Metabolic profiling of the bioactive plant, A. lucidior, via UHPLC/MS/MS-based Molecular Networking highlighted the richness of its ethanolic extract with budmunchiamine alkaloids, fourteen budmunchiamine alkaloids as well as four new putative ones were tentatively identified for the first time in A. lucidior. Pursuing these alkaloids in the fractions of A. lucidior extract via molecular networking revealed that alkaloids were mainly concentrated in the ethyl acetate fraction. In agreement, the alkaloid-rich fraction showed the most promising anticholinesterase activity (IC₅₀ 5.26 µg/mL) versus the ethanolic extract and ethyl acetate fraction of A. lucidior (IC₅₀ 24.89 and 6.90 µg/mL, respectively), compared to donepezil (IC₅₀ 3.90 µg/mL). Furthermore, deep in silico studies of tentatively identified alkaloids of A. lucidior were performed. Notably, normethyl budmunchiamine K revealed superior stability and receptor binding affinity compared to the two used references: donepezil and the co-crystallized inhibitor (MF2 700). This was concluded based on molecular docking, molecular dynamics simulations and molecular mechanics generalized born/solvent accessibility (MM-GBSA) calculations.

Effect-directed analysis in food by thin-layer chromatography assays

Thin-layer chromatography (TLC) is widely used for food analysis and quality control. As an open chromatographic system, TLC is compatible with microbial-, biochemical-, and chemical-based derivatization methods. This compatibility makes it possible to run in situ bioassays directly on the plate to obtain activity-profile chromatograms, i.e., the effect-directed analysis of the sample. Many of the properties that can be currently measured using this assay format are related to either desired or undesired features for food related products. The TLC assays can detect compounds related to the stability of foods (antioxidant, antimicrobial, antibrowning, etc.), contaminants (antibiotics, pesticides, estrogenic compounds, etc.), and compounds that affect the absorption, metabolism or excretion of nutrients and metabolites or could improve the consumers health (enzyme inhibitors). In this article, different food related TLC-assays are reviewed. The different detection systems used, the way in which they are applied as well as selected examples are discussed.

Determination of Antioxidant, Antimicrobial Activity, Heavy Metals and Elements Content of Seaweed Extracts

The aim of the research was to determine the antioxidant and antimicrobial activity, determination of chemical elements and heavy metals in seaweed extracts of wakame, arame, dulse, laminaria, kombu, and hijiki. Antioxidant activity was determined by DPPH method and the activity ranged from 0.00 to 2641.34 TEAC. The highest antioxidant activity was observed in kombu (2641.34 TEAC) and arame (2457.5 TEAC). Antimicrobial activity was analyzed by disk diffusion method and MIC method. Three G⁺ bacteria (Staphylococcus aureus, Enterococcus faecalis, Bacillus subtilis), three G^- bacteria (Salmonella enterica, Pseudomonas aeruginosa, Yersinia enterocolitica), and four yeasts (Candida tropicalis, C. krusei, C. glabrata, C. albicans) were used as model organisms. The size of inhibition zones ranged from 0.00 to 8.67 mm. The minimum inhibitory concentrations of the selected seaweeds ranged from MIC₅₀ 98.46 (MIC₉₀ 100.25) to MIC₅₀ 3.43 µL/mL (MIC₉₀ 5.26 µL/mL). The content of selected elements was determined in seaweed samples by ICP-OES. The chemical composition of the algae showed differences between species and the presence of heavy metals. Arsenic, cadmium, and aluminum were confirmed. All seaweed samples contained arsenic ranging from 6.6546 to 76.48 mg/kg. Further investigation of seaweeds is needed to identify the active substances present in the algae that are responsible for antioxidant and antimicrobial activity. This study was carried out to evaluate the antimicrobial and antioxidant activity of extracts from five commonly consumed seaweeds for their ability to inhibit selected microorganisms and to determine the health risk due to heavy metals content. Our study contributes to the evidence that seaweeds have antimicrobial and antioxidant activity and seaweed extracts have for pharmacological applications.

Variations in the Composition, Antioxidant and Antimicrobial Activities of Cystoseira compressa during Seasonal Growth

The underexplored biodiversity of seaweeds has recently drawn great attention from researchers to find the bioactive compounds that might contribute to the growth of the blue economy. In this study, we aimed to explore the effect of seasonal growth (from May to September) on the in vitro antioxidant (FRAP, DPPH, and ORAC) and antimicrobial effects (MIC and MBC) of Cystoseira compressa collected in the Central Adriatic Sea. Algal compounds were analyzed by UPLC-PDA-ESI-QTOF, and TPC and TTC were determined. Fatty acids, among which oleic acid, palmitoleic acid, and palmitic acid were the dominant compounds in samples. The highest TPC, TTC and FRAP were obtained for June extract, 83.4 ± 4.0 mg GAE/g, 8.8 ± 0.8 mg CE/g and 2.7 ± 0.1 mM TE, respectively. The highest ORAC value of 72.1 ± 1.2 µM TE was obtained for the August samples, and all samples showed extremely high free radical scavenging activity and DPPH inhibition (>80%). The MIC and MBC results showed the best antibacterial activity for the June, July and August samples, when sea temperature was the highest, against Listeria monocytogenes, Staphylococcus aureus, and Salmonella enteritidis. The results show C. compressa as a potential species for the industrial production of nutraceuticals or functional food ingredients.

Recent advances in industrial applications of seaweeds

Seaweeds have been generally utilized as food and alternative medicine in different countries. They are specifically used as a raw material for wine, cheese, soup, tea, noodles, etc. In addition, seaweeds are potentially good resources of protein, vitamins, minerals, carbohydrates, essential fatty acids and dietary fiber. The quality and quantity of biologically active compounds in seaweeds depend on season and harvesting period, seaweed geolocation as well as ecological factors. Seaweeds or their extracts have been studied as innovative sources for a variety of bioactive compounds such as polyunsaturated fatty acids, polyphenols, carrageenan, fucoidan, etc. These secondary metabolites have been shown to have antioxidant, antimicrobial, antiviral, anticancer, antidiabetic, anti-inflammatory, anti-aging, anti-obesity and anti-tumour properties. They have been used in pharmaceutical/medicine, and food industries since bioactive compounds from seaweeds are regarded as safe and natural. Therefore, this article provides up-to-date information on the applications of seaweed in different industries such as pharmaceutical, biomedical, cosmetics, dermatology and agriculture. Further studies on innovative extraction methods, safety issue and health-promoting properties should be reconsidered. Moreover, the details of the molecular mechanisms of seaweeds and their bioactive compounds for physiological activities are to be clearly elucidated.

Seaweed Polysaccharide in Food Contact Materials (Active Packaging, Intelligent Packaging, Edible Films, and Coatings)

Food contact materials (FCMs) are materials that come in contact with food products such as food packaging which play a significant role in the food quality and safety. Plastic, which is a major food packaging material, harms the eco-system, wildlife, and the environment. As a result, numerous researches have been in progress on alternative polymers, which has similar properties as plastic but is also environmentally friendly (biodegradable). In recent years, the utilization of seaweed polysaccharides has piqued interest due to its biodegradability, non-toxicity, antioxidant capabilities, and excellent film formation ability. However, it has a number of drawbacks such as low tensile strength, water solubility, and moderate antibacterial characteristics, among others. The addition of other biopolymers, nanoparticles, or natural active agents improves these features. In this review article, we have summarized the current state of seaweed polysaccharide research in active packaging, intelligent packaging, edible films, and coatings. It also highlights the physical, thermal, antioxidant, and other properties of these materials. Finally, the article discusses the relevant legislation as well as the field’s future prospects. Research shows that seaweeds polysaccharide looks promising as a sustainable food contact material, but there is always a potential for development to make it market feasible.

Life cycle assessment of edible insects (Protaetia brevitarsis seulensis larvae) as a future protein and fat source

Because it is important to develop new sustainable sources of edible protein, insects have been recommended as a new protein source. This study applied Life Cycle Assessment (LCA) to investigate the environmental impact of small-scale edible insect production unit in South Korea. IMPACT 2002 + was applied as the baseline impact assessment (IA) methodology. The CML-IA baseline, EDIP 2003, EDP 2013, ILCD 2011 Midpoint, and ReCiPe midpoint IA methodologies were also used for LCIA methodology sensitivity analysis. The protein, fat contents, and fatty acid profile of the investigated insect (Protaetia brevitarsis seulensis larvae) were analyzed to determine its potential food application. The results revealed that the studied edible insect production system has beneficial environmental effects on various impact categories (ICs), i.e., land occupation, mineral extraction, aquatic and terrestrial ecotoxicity, due to utilization of bio-waste to feed insects. This food production system can mitigate the negative environmental effects of those ICs, but has negative environmental impact on some other ICs such as global warming potential. By managing the consumption of various inputs, edible insects can become an environmentally efficient food production system for human nutrition.