Comparison of legume and dairy proteins for the impact of Maillard conjugation on nanoemulsion formation, stability, and lutein color retention

Agar-gelatin Maillard conjugates used for Pickering emulsion stabilization

A few protein- and polysaccharide-based particles have shown promising potential as stabilizers in multi-phase food systems. By incorporating polymer-based particles and modifying the wettability of colloidal systems, it is possible to create particle-stabilized emulsions with excellent stability. A Pickering emulsifier (AGMs) with better emulsifying properties was obtained by the Maillard reaction between acid-hydrolysed agar and gelatin. Laser confocal microscopy imaging revealed that AGMs particles can be used as solid emulsifiers to produce a typical O/W Pickering emulsion, with AGMs adsorbing onto the droplet surface to form a dense interfacial layer. Cryo-scanning electron microscopy analysis showed that AGMs self-assembled into a three-dimensional network structure, which prevented droplets aggregation through strong spatial site resistance, contributing to emulsion stabilization. These emulsions exhibited stability within a pH range of 1 to 11, NaCl concentrations not exceeding 300 mM, and at temperatures below 80 °C. The most stable emulsion oil-water ratio was 6:4 at a particle concentration of 0.75 % (w/v). AGMs-stabilized Pickering emulsion was utilized to create a semi-solid mayonnaise as a replacement for hydrogenated oil. Rheological analysis demonstrated that low-fat mayonnaise stabilized with AGMs exhibited similar rheological behavior to traditional mayonnaise, offering new avenues for the application of Pickering emulsions in the food industry.

Application of legumes in plant-based milk alternatives: a review of limitations and solutions

In recent years, a global shift has been observed toward reducing the consumption of animal-derived foods in favor of healthier and more sustainable dietary choices. This has led to a steady growth in the market for plant-based milk alternatives (PBMAs). Projections suggest that this market will reach a value of USD 69.8 billion by 2030. Legumes, being traditional and nutritious ingredients for PMBAs, are rich in proteins, dietary fibers, and other nutrients, with potential health benefits such as anticancer and cardiovascular disease prevention. In this review, the application of 12 legumes in plant-based milk alternatives was thoroughly discussed for the first time. However, compared to milk, processing of legume-based beverages can lead to deficiencies such as nutritional imbalance, off-flavor, and emulsion stratification. Considering the potential and challenges associated with legume-based beverages, this review aims to provide a scientific comparison between legume-based beverages and cow's milk in terms of nutritional quality, organoleptic attributes and stability, and to summarize ways to improve the deficiencies of legume-based beverages in terms of raw materials and processing method improvements. In conclusion, the legume-based beverage industry will be better enhanced and developed by improving the issues.

Physicochemical characterization and environmental stability of a curcumin-loaded Pickering nanoemulsion using a pea protein isolate-dextran conjugate via the Maillard reaction

This study investigated pea protein isolate (PPI) and dextran (DX) conjugates produced via the Maillard reaction as Pickering stabilizers for various food applications. The results found that as heating time increased (0-5 h), the grafting degree heightened. The PPI-DX conjugate exhibited a rough porous surface in contrast to native PPI, accompanied by changes in molecular weight and secondary structure. Additionally, the aggregation of low-solubility PPI was partially inhibited due to the contribution of increased solubility and reduced surface hydrophobicity by glycation. Curcumin-loaded Pickering nanoemulsions stabilized with PPI-DX had smaller droplets and higher curcumin encapsulation (greater than80 %) than PPI-stabilized nanoemulsions. PPI-DX adsorbed on the interface showed improved physical stability compared to PPI alone, even after various pH conditions and three heat treatments. The nanoemulsion stabilized with PPI-DX demonstrated improved apparent viscosity and dispersion stability. These findings highlight the effectiveness of PPI-DX conjugates as stabilizers for developing stable and functional Pickering nanoemulsions.

Pulse Protein Isolates as Competitive Food Ingredients: Origin, Composition, Functionalities, and the State-of-the-Art Manufacturing

The ever-increasing world population and environmental stress are leading to surging demand for nutrient-rich food products with cleaner labeling and improved sustainability. Plant proteins, accordingly, are gaining enormous popularity compared with counterpart animal proteins in the food industry. While conventional plant protein sources, such as wheat and soy, cause concerns about their allergenicity, peas, beans, chickpeas, lentils, and other pulses are becoming important staples owing to their agronomic and nutritional benefits. However, the utilization of pulse proteins is still limited due to unclear pulse protein characteristics and the challenges of characterizing them from extensively diverse varieties within pulse crops. To address these challenges, the origins and compositions of pulse crops were first introduced, while an overarching description of pulse protein physiochemical properties, e.g., interfacial properties, aggregation behavior, solubility, etc., are presented. For further enhanced functionalities, appropriate modifications (including chemical, physical, and enzymatic treatment) are necessary. Among them, non-covalent complexation and enzymatic strategies are especially preferable during the value-added processing of clean-label pulse proteins for specific focus. This comprehensive review aims to provide an in-depth understanding of the interrelationships between the composition, structure, functional characteristics, and advanced modification strategies of pulse proteins, which is a pillar of high-performance pulse protein in future food manufacturing.

Drying Technique Providing Maximum Benefits on Hydrogelling Ability of Avocado Seed Protein: Spray Drying

The current study focused on creating natural hydrogels consisting of mixtures of avocado seed proteins dried with different techniques and locust bean gum. Proteins were extracted from avocado seed by alkali and isoelectric precipitation methods. Avocado seed proteins were dried by five different drying methods, namely ambient drying, oven drying, vacuum drying, freeze drying, and spray drying. FT-IR spectra were used to analyze the chemical structure of proteins dried using various techniques. Additionally, hydrogel models were constructed in the presence of avocado seed proteins and locust bean gum to clarify the effect of drying techniques on their hydrogelling ability. The impact of drying techniques on the functional behavior of hydrogels was notable. The maximum water holding capacity values were detected in the hydrogel system containing spray-dried proteins (93.79%), followed by freeze-dried (86.83%), vacuum-dried (76.17%), oven-dried (72.29%), and ambient-dried (64.8%) counterparts. The swelling ratio was 34.10, 33.51, 23.05, 18.93, and 14.39% for gels in the presence of freeze-dried, spray-dried, vacuum-dried, oven-dried, and ambient-dried proteins, respectively. Additionally, the desirable values for the amount of protein leaking from the systems prepared using spray-dried (7.99%) and freeze-dried (12.14%) proteins were obtained compared to others (ambient-dried: 24.03%; oven-dried: 17.69%; vacuum-dried: 19.10%). Superior results in terms of textural properties were achieved in hydrogel models containing spray-dried and freeze-dried proteins. In general, hydrogel models exhibited elastic behavior rather than viscous properties; however, the magnitudes of elasticity varied. Furthermore, the success of gels containing hydrogel models containing spray-dried protein and locust bean gum in the bioactive compound delivery system was obvious compared with protein ones alone.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Esterified Soy Proteins with Enhanced Antibacterial Properties for the Stabilization of Nano-Emulsions under Acidic Conditions

Soy protein isolate (SPI), including β-conglycinin (7S) and glycinin (11S), generally have low solubility under weakly acidic conditions due to the pH closed to their isoelectric points (pIs), which has limited their application in acidic emulsions. Changing protein pI through modification by esterification could be a feasible way to solve this problem. This study aimed to obtain stable nano-emulsion with antibacterial properties under weakly acidic conditions by changing the pI of soy protein emulsifiers. Herein, the esterified soy protein isolate (MSPI), esterified β-conglycinin (M7S), and esterified glycinin (M11S) proteins were prepared. Then, pI, turbidimetric titration, Fourier transform infrared (FTIR) spectra, intrinsic fluorescence spectra, and emulsifying capacity of esterified protein were discussed. The droplet size, the ζ-potential, the stability, and the antibacterial properties of the esterified protein nano-emulsion were analyzed. The results revealed that the esterified proteins MSPI, M7S, and M11S had pIs, which were measured by ζ-potentials, as pH 10.4, 10.3, and 9.0, respectively, as compared to native proteins. All esterified-protein nano-emulsion samples showed a small mean particle size and good stability under weakly acidic conditions (pH 5.0), which was near the original pI of the soy protein. Moreover, the antibacterial experiments showed that the esterified protein-based nano-emulsion had an inhibitory effect on bacteria at pH 5.0.

Food protein glycation: A review focusing on stability and in vitro digestive characteristics of oil/water emulsions

Recently, increasing studies have shown that the functional properties of proteins, including emulsifying properties, antioxidant properties, solubility, and thermal stability, can be improved through glycation reaction under controlled reaction conditions. The use of glycated proteins to stabilize hydrophobic active substances and to explore the gastrointestinal fate of the stabilized hydrophobic substances has also become the hot spot. Therefore, in this review, the effects of glycation on the structure and function of food proteins and the physical stability and oxidative stability of protein-stabilized oil/water emulsions were comprehensively summarized and discussed. Also, this review sheds lights on the in vitro digestion characteristics and edible safety of emulsion stabilized by glycated protein. It can further serve as a research basis for understanding the role of structural features in the emulsification and stabilization of glycated proteins, as well as their utilization as emulsifiers in the food industry.

Structure and stability characterization of pea protein isolate-xylan conjugate-stabilized nanoemulsions prepared using ultrasound homogenization

Preparation of pea protein isolate-xylan (PPI-X) conjugate-stabilized nanoemulsions using ultrasonic homogenization and the corresponding structure and environmental stability were investigated in this study. Conditions used to prepare nanoemulsions were optimized using a response surface methodology as follows: protein concentration 8.86 mg/mL, ultrasound amplitudes 57 % (370.5 W), and ultrasound time 16 min. PPI-X conjugate-stabilized nanoemulsions formed under these conditions exhibited less mean droplet size (189.4 ± 0.45 nm), more uniform droplet distribution, greater absolute value of zeta-potential (44.8 ± 0.22 mV), and higher protein adsorption content compared with PPI-stabilized nanoemulsions. PPI-X conjugate-stabilized nanoemulsions also exhibited even particle distribution and dense network structure, which might be reasons for the observed high interfacial protein adsorption content of conjugate-stabilized nanoemulsions. Moreover, better stability against environmental stresses, such as thermal treatment, freeze-thaw treatment, ionic strength and type, and storage time was also observed for the conjugate-stabilized nanoemulsions, indicating that this type of nanoemulsions possess a potential to endure harsh food processing conditions. Therefore, results provide a novel approach for the preparation of protein-polysaccharide conjugate-stabilized nanoemulsions to be applied as novel ingredients to meet special requirements of processed foods.

Ultra-stable high internal phase emulsions stabilized by protein-anionic polysaccharide Maillard conjugates

This paper reports the production of O/W high internal phase emulsions (HIPEs) using protein-anionic polysaccharide Maillard conjugates. First, Maillard conjugates were prepared from soy protein isolate (SPI) or sodium caseinate (SC) proteins and Alyssum homolocarpum seed gum (AHSG) or kappa-carrageenan (kC) polysaccharides. The conjugation process was confirmed and monitored by UV spectrophotometry, Fourier transform infrared, circular dichroism, fluorescence spectroscopies, and differential scanning calorimetry. Under the optimized reaction conditions, SC-AHSG conjugates exhibited the highest glycation degree and emulsifying properties. Next, HIPEs were made using the optimized conjugates, and their microstructure, droplet size, and physical stability were evaluated. The emulsion stabilized by SC-AHSG conjugate had the lowest mean droplet size (363.07 ± 34.56 nm), orderly-packed oil droplets with monomodal distribution, the highest zeta potential (-27.70 ± 0.70 mV), high storage stability (no creaming or oil-off) and was ultra-stable against environmental stresses. Results of this research are helpful for development of emulsion-based foods with novel functionality.

Gellan gum conjugation with soy protein via Maillard-driven molecular interactions and subsequent clustering lead to conjugates with tuned technological functionality

•

Soy protein isolate (SPI) was conjugated to low acyl gellan gum (LAGG).

•

Conjugate formation was confirmed by glycation degree (DG) and structural changes.

•

SPI-LAGG conjugates were classified into low, medium, and high DG clusters.

•

A low DG was enough to enhance the techno-functional properties of SPI.

Soy proteins are frequently used in the food industry; however, they have rigid and compact structure with relatively poor interfacial properties and solubility. This study was therefore aimed to modify techno-functional characteristics of soy protein isolate (SPI; 0.1% w/v) by conjugating to low acyl gellan gum (LAGG; 0.1, 0.2, and 0.3% w/v), through the Maillard reaction (at 90 °C for 90 min). The SPI-LAGG conjugates were confirmed by changes in pH, glycation degree (DG; up to 48%), Fourier transform infrared spectroscopy, and sodium dodecyl sulphate polyacrylamide electrophoresis. The conjugates were then classified into three clusters of low, medium, and high DG, via K-means clustering method. The low DG conjugate had lower surface hydrophobicity and foaming capacity, and higher thermal stability, solubility, emulsifying properties, foam stability, and antioxidant activity compared to the other clusters. This indicated that a low DG is required to enhance the functional properties of proteins.

Impacts of preparation conditions on the structure and emulsifying properties of casein-alginate conjugates produced by transacylation reaction

The Maillard reaction is often used to glycate proteins but produces undesirable byproducts. In this study, the transacylation reaction was used for the first time to prepare protein-polysaccharide conjugates from sodium caseinate (NaCas) and propylene glycol alginate (PGA) as novel emulsifiers. By mixing NaCas and PGA (1% w/v) at mass ratios of 1:2, 1:1, and 2:1 for 2 h with pH maintained at 11.0, NaCas-alginate conjugates with 52.8%, 66.2%, and 76.5% NaCas were prepared, respectively. The purified conjugates resulted in the preparation of oil-in-water emulsions with a low surfactant-to-oil ratio of 0.75:100 (w:v), and the resultant emulsions were stable against environmental stresses of pH, ionic strength, and thermal pasteurization. Structural analyses showed the role of NaCas content in reducing droplet size and the role of the alginate moiety stabilizing oil droplets via the electrostatic and steric mechanisms. This work may be significant to prepare protein-polysaccharide conjugates with high emulsifying capacity and tunable functionalities using a scalable and green method.

Comparison of Lutein Bioaccessibility from Dietary Supplement-Excipient Nanoemulsions and Nanoemulsion-Based Delivery Systems

The impact of lutein-loaded nanoemulsions and excipient nanoemulsions mixed with lutein-based dietary supplements (capsules and soft gels) on the bioaccessibility of lutein was explored using a simulated gastrointestinal tract (GIT). The particle size, particle size distribution, ζ-potential, microstructure, lipid digestibility, and lutein bioaccessibility of all the samples were measured after they were exposed to different environments (stomach and small intestine environments) within a simulated GIT. As expected, the bioaccessibility of lutein from the capsules (1.5%) and soft gels (3.2%) was relatively low when they were administered alone. However, the co-administration of excipient nanoemulsions significantly increased the bioaccessibility of lutein from both the capsules (35.2%) and soft gels (28.7%). This phenomenon was attributed to the fast digestion of the small oil droplets in the excipient nanoemulsions and the further formation of mixed micelles to solubilize any lutein molecules released from the supplements. The lutein-loaded nanoemulsions exhibited a much higher lutein bioaccessibility (86.8%) than any of the supplements, which was attributed to the rapid release and solubilization of lutein when the lipid droplets were rapidly and extensively digested within the small intestine. This study indicates that the bioaccessibility of lutein is much higher in nanoemulsion droplets than that in dietary supplements. However, consuming dietary supplements in the presence of nanoemulsion droplets can greatly increase lutein bioavailability. The results of this study have important guiding significance for the design of more effective lutein supplements.

Conjugation of α-, β-, and κ-Caseins with Propylene Glycol Alginate Using a Transacylation Reaction as Novel Emulsifiers

Protein-polysaccharide conjugates usually have better emulsifying properties than their constituent biopolymers. In this study, casein-alginate conjugates were prepared using a transacylation reaction between different types of caseins and propylene glycol alginate (PGA) at pH 11.0. The purified conjugates had the combined molecular structure of casein and hydrolyzed PGA (alginate), according to Fourier-transform infrared spectroscopy, and α-, β-, and κ-casein-alginate conjugates had 39.17%, 37.78%, and 23.14% protein content, respectively. Emulsions were prepared with all the conjugates at a surfactant-to-oil ratio of 1:100 (w: (v), which is much lower than emulsions stabilized by Maillard-type protein-polysaccharide conjugates. The emulsions had high stability during storage and at wide pH (3.0-11.0) and ionic strength (0-450 mM) ranges. The interfacial tension of conjugate dispersions and therefore the droplet size were dependent on the protein content, not the casein type, while the polysaccharide moiety was critical to the emulsion stability. The present findings suggest a transacylation reaction can be used to prepare protein-alginate conjugates with novel emulsifying properties.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Development of Salt- and Gastric-Resistant Whey Protein Isolate Stabilized Emulsions in the Presence of Cinnamaldehyde and Application in Salad Dressing

Protein-stabilized emulsions tend to be susceptible to droplet aggregation in the presence of high ionic strengths or when exposed to acidic gastric conditions due to a reduction of the electrostatic repulsion between the protein-coated droplets. Previously, we found that incorporating cinnamaldehyde into the oil phase improved the resistance of whey protein isolate (WPI)-stabilized emulsions against aggregation induced by NaCl, KCl and CaCl2. In the current study, we aimed to establish the impact of cinnamaldehyde on the tolerance of WPI-stabilized emulsions to high salt levels during food processing and to gastric conditions. In the absence of cinnamaldehyde, the addition of high levels of monovalent ions (NaCl and KCl) to WPI-emulsions cause appreciable droplet aggregation, with the particle sizes increasing from 150 nm to 413 nm and 906 nm in the presence of NaCl and KCl, respectively. In contrast, in the presence of 30% cinnamaldehyde in the oil phase, the WPI-emulsions remained stable to aggregation and the particle size of emulsions kept within 200 nm over a wide range of salt concentrations (0-2000 mM). Divalent counter-ions promoted droplet aggregation at lower concentrations (≤20 mM) than monovalent ones, which was attributed to ion-binding and ion-bridging effects, but the salt stability of the WPI emulsions was still improved after cinnamaldehyde addition. The incorporation of cinnamaldehyde into the oil phase also improved the resistance of the WPI-coated oil droplets to aggregation in simulated gastric fluids (pH 3.1-3.3). This study provides a novel way of improving the resistance of whey-protein-stabilized emulsions to aggregation at high ionic strengths or under gastric conditions.

Glycation of Plant Proteins Via Maillard Reaction: Reaction Chemistry, Technofunctional Properties, and Potential Food Application

Plant proteins are being considered to become the most important protein source of the future, and to do so, they must be able to replace the animal-derived proteins currently in use as techno-functional food ingredients. This poses challenges because plant proteins are oftentimes storage proteins with a high molecular weight and low water solubility. One promising approach to overcome these limitations is the glycation of plant proteins. The covalent bonding between the proteins and different carbohydrates created via the initial stage of the Maillard reaction can improve the techno-functional characteristics of these proteins without the involvement of potentially toxic chemicals. However, compared to studies with animal-derived proteins, glycation studies on plant proteins are currently still underrepresented in literature. This review provides an overview of the existing studies on the glycation of the major groups of plant proteins with different carbohydrates using different preparation methods. Emphasis is put on the reaction conditions used for glycation as well as the modifications to physicochemical properties and techno-functionality. Different applications of these glycated plant proteins in emulsions, foams, films, and encapsulation systems are introduced. Another focus lies on the reaction chemistry of the Maillard reaction and ways to harness it for controlled glycation and to limit the formation of undesired advanced glycation products. Finally, challenges related to the controlled glycation of plant proteins to improve their properties are discussed.

Improvement of protein emulsion stability through glycosylated black bean protein covalent interaction with (-)-epigallocatechin-3-gallate

This study investigated the effects of covalent conjugates combined by glycosylated black bean protein isolate (BBPI-G) and (−)-epigallocatechin-3-gallate (EGCG) on the emulsion stability. Fourier transform infrared (FTIR) spectroscopy showed that covalent binding of EGCG with BBPI-G made the protein molecule unfolded. Besides, the emulsifying properties of BBPI-G were increased after combined with EGCG. BBPI-G–EGCG emulsion had lower mean particle size and higher content of interfacial protein adsorption (AP), which resulted in thicker and more impact oil–water interface. Therefore, the stability of emulsions was significantly improved. Furthermore, the emulsions prepared by BBPI-G–EGCG compounds exhibited considerable stability in storage, oxidation, thermal treatments, freeze–thaw and freeze-dried powders resolubility. This study demonstrated that the covalent bond of glycosylated protein and polyphenols could advance the emulsifying performance of protein, and BBPI-G–EGCG covalent complex was an effective emulsifier for preparing high stability emulsions.

Stability improvement of emulsions stabilized by covalent conjugation with glycosylated black bean protein and EGCG (BBPI-G–EGCG) was studied through structure changes of proteins and emulsion properties.