New water-soluble chitin derivative with high antibacterial properties for potential application in active food coatings

Recyclable bactericidal packaging films for emperor banana preservation

Food safety issues and food waste have always been hot topics of concern. This study aimed to develop a recyclable bactericidal packaging film that combines polylactic acid (PLA), graphitic carbon nitride (CN) and carbon nanotubes (CNT) to extend food shelf life. This film exhibited compactness and thermostability, as observed by scanning electron microscope and differential scanning calorimeter. The temperature of P/CN/CNT film could still reach 54 ± 4 °C after being used for 3 times. The film still has bactericidal activity on the 5th cycle use except for L. monocytogenes revealed by morphological characterization on bacteria. This film effectively extended the shelf life of banana to 7 days, as confirmed by measurements of hardness, pH value and total bacterial count of banana. This study provides a packaging film with recyclable bactericidal ability.

Nanochitosan from crustacean and mollusk byproduct: Extraction, characterization, and applications in the food industry

Crustaceans and mollusks are widely consumed around the world due to their delicacy and nutritious value. During the processing, only 30-40 % of these shellfish are considered edible, while 70-60 % of portions are thrown away as waste or byproduct. These byproducts harbor valuable constituents, notably chitin. This chitin can be extracted from shellfish byproducts through chemical, microbial, enzymatic, and green technologies. However, chitin is insoluble in water and most of the organic solvents, hampering its wide application. Hence, chitin is de-acetylated into chitosan, which possesses various functional applications. Recently, nanotechnology has proven to improve the surface area and numerous functional properties of metals and molecules. Further, the nanotechnology principle can be extended to nanochitosan formation. Therefore, this review article centers on crustaceans and mollusks byproduct utilization for chitosan, its nano-formation, and their food industry applications. The extensive discussion has been focused on nanochitosan formation, characterization, and active site modification. Lastly, nanochitosan applications in various food industries, including biodegradable food packaging, fat replacer, bioactive compound carrier, and antimicrobial agent have been reported.

Hydrogels based on seafood chitin: From extraction to the development

Chitin is extensively applied in vast applications due to its excellent biological properties, such as biodegradable and non-toxic. About 50 % of waste generated during seafood processing is chitin. Conventionally, chitin is extracted via chemical method. However, it has many shortcomings. Many novel extraction methods have emerged, including enzymatic hydrolysis, microbial fermentation, ultrasonic or microwave-assisted, ionic liquids, and deep eutectic solvents. Chitin and its derivatives-based hydrogels have attracted much attention due to their excellent properties. Nevertheless, they all have many limitations. Therefore, the preparation and application of chitin and its derivatives-based hydrogels are still facing great challenges. This review focuses on the challenges and prospects for sustainable chitin extraction from seafood waste and the preparation and application of chitin and its derivatives-based hydrogels. First section summarizes the mechanism and application of several methods of extracting chitin. The different extraction methods were evaluated from the aspects of yield, degree of acetylation, and protein and mineral residuals. The shortcomings of the extraction methods are also discussed. Next section summarizes the preparation and application of chitin and its derivatives-based hydrogels. Overall, we hope this mini-review can provide a practical reference for selecting chitin extraction methods from seafood and applying chitin and its derivatives-based hydrogels.

Preparation of polysaccharide-based nanoparticles by chitosan and flaxseed gum polyelectrolyte complexation as carriers for bighead carp (Aristichthys nobilis) peptide delivery

Polysaccharide-based nanoparticles formed by the polyelectrolyte complexation between chitosan (CS) and flaxseed gum (FG) was developed in this work, and it was further used as a carrier for bighead carp peptide (BCP) delivery. The CS molecular weight (MW) of 50 kDa and CS/FG mass ratio of 1:2 at pH 3.5 were optimal conditions for the NP preparation, with the minimum particle size (∼155.1 nm) and the maximum BCP encapsulation efficiency (60.3 %). The BCP-loaded CS/FG NPs exhibited the smallest particle size (175.8 nm). Both CS/FG NPs and CS/FG-BCP NPs exhibited roughly uniform spherical shape. FT-IR spectra confirmed the existence of hydrogen bonds and electrostatic interactions in the nanoparticles. The BCP-loaded NPs displayed a higher thermal stability than BCP. Moreover, the release of BCP was controllable and dose-dependent, following a first-order kinetics model. These findings suggested that our CS/FG NPs are a promising carrier for bioactive peptide delivery.

Insights into the relationships of modifying methods, structure, functional properties and applications of chitin: A review

Chitin as the second plentiful polysaccharide has arouse widely attention due to its remarkable availability and biocompatibility. While the strong inter/intra molecular hydrogen bonds and crystallinity severely restrict its applications. Recently, multiple emerging technologies are increasingly used to modify chitin structure for the sake of obtaining excellent functional properties, as well as broadening the corresponding applications. Firstly, this review systematically outlines the features of single and combined methods for chitin modification. Then, the impacts of various modifying methods on the structural characteristics of chitin, including molecular weight, degree of acetylation and functional groups, are further summarized. In addition, the effects of these structural characteristics on the functional properties as well as its potential related applications are illustrated. The conclusion of this review provides better understanding of the relationships among the modifying methods, structure, properties and applications, contributing to chitin modification for the targeted purpose in the future study.

Collagen, protein hydrolysates and chitin from by-products of fish and shellfish: An overview

Waste processing from fish and seafood manufacturers represents a sustainable option to prevent environmental contamination, and their byproducts offer different benefits. Transforming fish and seafood waste into valuable compounds that present nutritional and functional properties compared to mammal products becomes a new alternative in Food Industry. In this review, collagen, protein hydrolysates, and chitin from fish and seafood byproducts were selected to explain their chemical characteristics, production methodologies, and possible future perspectives. These three byproducts are gaining a significant commercial market, impacting the food, cosmetic, pharmaceutical, agriculture, plastic, and biomedical industries. For this reason, the extraction methodologies, advantages, and disadvantages are discussed in this review.

Novel Non-Toxic Highly Antibacterial Chitosan/Fe(III)-Based Nanoparticles That Contain a Deferoxamine—Trojan Horse Ligands: Combined Synthetic and Biological Studies

In this study, we prepared chitosan/Fe(III)/deferoxamine nanoparticles with unimodal size distribution (hydrodynamic diameter ca. 250 nm, zeta potential ca. 32 mV). The elaborated nanoparticles are characterized by outstanding in vitro and in vivo antibacterial activity, which exceeds even that of commercial antibiotics ampicillin and gentamicin. Moreover, the nanoparticles are non-toxic. We found that the introduction of iron ions into the chitosan matrix increases the ability of the resulting nanoparticles to disrupt the integrity of the membranes of microorganisms in comparison with pure chitosan. The introduction of deferoxamine into the obtained nanoparticles sharply expands their effect of destruction the bacterial membrane. The obtained antibacterial nanoparticles are promising for further preclinical studies.

Engineering chitosan into fully bio-sourced, water-soluble and enhanced antibacterial poly(aprotic/protic ionic liquid)s packaging membrane

The design and facile preparation of water-soluble and eco-friendly polymer packaging membrane materials is a fascinating research topic, particularly in terms of the increasing concerns on potential microplastics pollution in ecosystem. In this study, taking advantages of the structural features of chitosan (CS) and betaine hydrochloride (BHC), fully bio-sourced and water-soluble poly(aprotic/protic ionic liquid)s (PAPILs) were successfully designed and prepared through the reaction of the amino groups in CS and carboxyl groups in BHC. The structure and thermo-properties of the PAPILs were elucidated by a series of characteristic methods. The rheological properties of the PAPILs aqueous solutions were also investigated. Moreover, water-soluble PAPILs membrane with a smooth surface morphology and a tensile strength of 62.9 MPa was successfully prepared. The PAPILs membrane also exhibited satisfactory biocompatibility, excellent antibacterial activities and high oxygen barrier property. Together with these outstanding material performance and functionality, as a "proof of concept", the potential use of the PAPILs membrane as water-soluble packaging material for laundry detergent capsule and pesticide was preliminarily demonstrated. These findings provide significant insights for the design of sustainable and functional packaging materials by using natural resources.

Advances in the mechanisms of polysaccharides in alleviating depression and its complications

BACKGROUND

Depression is one of the most serious mental illnesses worldwide that endangers the health of people. The pathogenesis of depression is complex and is associated with abnormal neurotransmitter levels, activation of the hypothalamic-pituitary-adrenal (HPA) axis, inflammation, and gut flora-related disorders. However, most of the current pharmacological therapies used to manage depression are inconsistent and are associated with side effects. Owing to their low toxicity and wide availability in nature, polysaccharides are gradually attracting attention and are being discovered to exert direct or indirect antidepressant effects.

PURPOSE

In this review, we have summarized the classification, dosage, and experimental models to study polysaccharides with antidepressant effects obtained from different sources. We have also reviewed the protective effects and underlying mechanisms of these polysaccharides in depression by modulating inflammation, the HPA axis, and intestinal flora.

METHODS

We searched the PubMed, Web of Science, and Google scholar databases and included studies that reported the use of polysaccharides in treating depression.

RESULTS

The unique benefits of natural polysaccharides as antidepressants lie in their potential to modulate inflammation, regulate the HPA axis, and regulate intestinal flora, giving full play to their antidepressant effects via multiple pathways and targets.

CONCLUSION

Natural polysaccharides may be a promising resource for use as adjuvant antidepressant therapy. Our study might therefore provide evidence for the development of polysaccharide resources as antidepressants.

Chitosan-Based Ciprofloxacin Extended Release Systems: Combined Synthetic and Pharmacological (In Vitro and In Vivo) Studies

Ciprofloxacin is one of the most effective antibiotics, but it is characterized by a range of side effects. Elaboration of drug-releasing systems which allow to diminish toxicity of ciprofloxacin is a challenging task in medicinal chemistry. The current study is focused on development of new ciprofloxacin releasing systems (CRS). We found that ultrasound efficiently promotes N,N'-dicyclohexyl carbodiimide-mediated coupling between COOH and NH₂ functionalities in water. This was used for conjugation of ciprofloxacin to chitosan. The obtained ciprofloxacin/chitosan conjugates are capable of forming their self-assembled nanoparticles (SANPs) in aqueous medium. The SANPs can be additionally loaded by ciprofloxacin to form new CRS. The CRS demonstrated high loading and encapsulation efficiency and they are characterized by extended release profile (20 h). The elaborated CRS were tested in vivo in rats. The in vivo antibacterial effect of the CRS exceeded that of the starting ciprofloxacin. Moreover, the in vivo acute and subacute toxicity of the nanoparticles was almost identical to that of the chitosan, which is considered as the non-toxic biopolymer.

Effective control of microbial spoilage in soybeans by water-soluble ZnO nanoparticles

The microbial spoilage of soybeans during soaking process severely deteriorates the quality of soybean products and threatens human health. Herein, water-soluble aminated zinc oxide nanoparticles (ZnO NPs) were developed to effectively control the microbial spoilage in soybeans during soaking. ZnO NPs achieved significant inactivation of three dominant spoilage bacteria (bacillus cereus, bacillus megaterium and enterococcus faecium) isolated from the deteriorated soybeans, which could adhere to the bacterial surface and damage the cell wall/membrane, but also generate large amounts of reactive oxygen species (ROS). Compared to two commercial ZnO, water-soluble ZnO exhibited superior antibacterial properties due to producing more ROS and bacteria-adhered ability. After ZnO NPs treatment, the content of the residual Zn (51.1 mg/kg) in soybeans was the safety standards of Zn element in soybeans products for human). Therefore, the water-soluble ZnO NPs showed great potentials as efficient and safe antimicrobial agents for soybeans preservation during soaking process.

A MoS2QDs/chitin nanofiber composite for improved antibacterial and food packaging

Chitin nanofiber has potential application as antibacterial nanocomposite material because of its inherent biocompatibility, biological activity, amino containing macromolecular structure and nano-size effect. Molybdenum disulfide quantum dots (MoS₂QDs) were uniformly bonded on partially deacetylated chitin nanofibers (DEChNs) by hydrothermal reactions. The antibacterial properties of MoS₂QDs/DEChN against Escherichia coli were detected under different conditions. When the antibacterial agent was fixed at 200 μg/mL, the survival rates of bacteria were 2.77% (pH = 4), 5.58% (pH = 5) and 7.83% (pH = 6), which were lower than those in the DEChN groups. Unlike DEChN, which only had excellent antibacterial activity under acidic conditions (pH < 5), the combination of DEChN and MoS₂QDs had antibacterial activity close to neutral conditions, with a bacteriostatic rate > 90%. When TEMPO-oxidized cellulose nanofibers (TOCN) were applied for the preparation of MoS₂QDs/TOCN, they did not show obvious antibacterial ability, which proved the positive role of DEChN and its amino groups. The MoS₂QDs/DEChN assembled film could be applied to preserve meat by delaying spoilage. The current study might inspire new ideas for designing food packaging based on the prepared MoS₂QDs/DEChN films.

Extraction and characterization of chitin from Oratosquilla oratoria shell waste and its application in Brassica campestris L.ssp

Mantis shrimp waste (Oratosquilla oratoria) is a good source of chitin. The applicability of microwave-assisted organic acids and proteases for extracting chitin from mantis shrimp shell waste was evaluated, and the extracted-chitin was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Moreover, the effects of nanochitin on the growth of pak choi (Brassica campestris L.ssp.) were also investigated. The results indicated that alkaline protease (4000 U/g, microwave heating at 60 °C, 10 min) and malic acid (5%, 320 W, 5 min) exhibited excellent potential for deproteinizing and demineralizing shells. The deproteinization and demineralization yields were 92.78% and 94.11%, respectively, and the chitin yield was 15.6%. The extracted-chitin had a highly porous structure and exhibited excellent crystallinity and thermostability compared with chitin prepared by traditional chemical methods. Furthermore, 0.003% nanochitin significantly enhanced photosynthesis, which improved the pak choi fresh weight by 22.94%, and improved the accumulation of isothiocyanates in its leaves. This study provides an alternative approach for the high-value utilization of mantis shrimp waste, and reveals the potential of chitin for application in agricultural production.

Comparison of the Proximate Composition and Nutritional Profile of Byproducts and Edible Parts of Five Species of Shrimp

The nutritional components of different parts (meat, head, shell and tail) of Litopenaeus vannamei (L.v), Macrobrachium rosenbergii (M.r), Penaeus monodon (P.m), Fenneropenaeus chinensis (F.c), and Penaeus japonicus (P.j) were analyzed and their nutritional values were evaluated. For the five species of shrimp, the meat yield was 37.47–55.94%, and the byproduct yield was 44.06–62.53%. The meat yields of L.v and F.c were the highest (55.94 and 55.92%, respectively), and the meat yield of M.r was the lowest (37.47%). The shrimp contain high amounts of crude protein, and the values of the amino acid score (AAS), chemical score (CS), and essential amino index (EAAI) were greater than or close to 1.00, indicating that shrimp protein had higher nutritional value. The shrimp head was rich in polyunsaturated fatty acids and the ratio of n-6 to n-3 PUFAs was from 0.37 to 1.68, indicating that the shrimp head is rich in n-3 PUFAs and is a good source of n-3 PUFAs. The five species of shrimp were rich in macro- and micro-minerals, especially in shrimp byproducts. The shrimp byproducts were also rich in other bioactive ingredients (astaxanthin), which are also very valuable for developing biological resources. Therefore, shrimp have many nutritional benefits, and their byproducts can also be used to develop natural nutraceuticals, which are considered to be one of the healthiest foods.

A Novel GH Family 20 β-N-acetylhexosaminidase With Both Chitosanase and Chitinase Activity From Aspergillus oryzae

Aminooligosaccharides possess various biological activities and can exploit wide applications in food, pharmaceutical and cosmetic industries. Commercial aminooligosaccharides are often prepared by the hydrolysis of chitin and chitosan. In this study, a novel GH family 20 β-N-acetylhexosaminidases gene named AoNagase was cloned from Aspergillus oryzae and expressed in Pichia pastoris. The purified AoNagase had maximal activity at pH 5.5 and 65°C. It exhibited good pH stability in the range of pH 6.0–7.5 and at temperatures below 50°C. AoNagase was capable of hydrolyzing not only colloidal chitosan (508.26 U/mg) but also chitin (29.78 U/mg). The kinetic parameters (K_m and V_max) of AoNagase were 1.51 mM, 1106.02 U/mg for chitosan and 0.41 mM, 40.31 U/mg for colloidal chitin. To our knowledge, AoNagase is the first GH family 20 β-N-acetylhexosaminidase capable of hydrolyzing both chitosan and chitin. AoNagase is an endo-type β-N-acetylhexosaminidases and can potentially be used for the manufacturing of aminooligosaccharides.

Optimization of Extraction of Bioactive Compounds from Baphicacanthus cusia Leaves by Hydrophobic Deep Eutectic Solvents

Deep eutectic solvents (DESs) are considered as efficient and green solvents for the extraction of bioactive compounds from medicinal plants. In this work, a novel method of DES-based ultrasound-assisted extraction of bioactive compounds from Baphicacanthus cusia leaves (BCL) was established. Systematic screening and the morphology of the original and treated BCL were observed with scanning electron microscopy to determine the extraction efficiency of different solvents. The extraction conditions were optimized by Box–Behnken design (BBD) tests and the optimal extraction conditions were as follows: lactic acid/L-menthol ratio of 5: 2 (mol/mol), solid–liquid ratio of 80.0 mL/g and temperature of 60.5 °C. The extraction yields of tryptanthrin, indigo and indirubin reached 0.356, 1.744 and 0.562 mg/g, respectively. The results of a 2,2-diphenyl-1-picrylhydrazy (DPPH) radical scavenging activity test indicated the feasibility of DESs in the extraction of bioactive compounds. This study indicated that L-menthol/lactic acid was a green and efficient solvent for the extraction of bioactive compounds from BCL, and DES-based ultrasound-assisted extraction could be used as an effective application strategy for the extraction of bioactive compounds from medicinal plants.