Efficient and selective extraction of azamethiphos and chlorpyrifos residues from mineral water and grape samples using magnetic mesoporous molecularly imprinted polymer

Silver Core Coated with Molecularly Imprinted Polymer as Adsorbent in Pipet-Tip Solid Phase Extraction for Neonicotinoids Determination from Coconut Water

In this work, we report an innovative adsorbent named Ag-MPS@MIP that has a core@shell structure, i.e., silver nanoparticles modified with 3-methacryloxypropyltrimethoxysilane as the core and molecularly imprinted polymer based on methacrylic acid as its shell. Thiamethoxam, imidacloprid, and acetamiprid were extracted from coconut water samples using Ag-MPS@MIP in pipet-tip solid phase, prior to high-performance liquid chromatography analysis. The separation was carried out on isocratic mode using a mobile phase consisting of C18 column (Phenomenex, 150 mm × 4.6 mm, 5 μm), ultrapure water acidified with 0.3% phosphoric acid:acetonitrile (78:22, v/v), flow rate at 1.0 mL min-1, injection volume of 10 μL, temperature of 25 °C, and wavelength at 260 nm. The adsorbent and precursor materials were properly characterized by different instrumental techniques. The main factors affecting the recovery of analytes from coconut water samples by pipet-tip solid phase were optimized, such as sample volume (250 μL), sample pH (pH = 5.0), ionic strength (1%, m/v), washing solvent (300 μL ultrapure water), volume and type of eluent (500 μL methanol), amount of adsorbent (15 mg), cycle of percolation-dispensing (1×), and reuse (5×). Thereby, the neonicotinoids presented extraction recoveries between 82.80 and 96.36%, enrichment factor of 5, linearity ranged from 15 to 4000 ng mL-1, correlation coefficient (r) > 0.99, limit of detection of 5 ng mL-1, satisfactory selectivity, stability, and proper precision (RSD%: 0.52-9.64%) and accuracy (RE%: -5.19-6.45%). The method was successfully applied to real samples of coconut water.

Facile extraction and determination of organophosphorus pesticides using poly (8-hydroxyquinoline) functionalized magnetic multi-walled carbon nanotubes nanocomposite in water, fruits, and vegetables samples

This study presents a dispersive micro-solid phase extraction (D-μ-SPE) approach for extracting and determining of two organophosphorus pesticides (OPPs), including diazinon and chlorpyrifos as model analytes in various samples. For this purpose, we synthesized, characterized, and utilized magnetic multi-walled carbon nanotubes coated with poly 8-hydroxyquinoline (MWCNTs/Fe3O4@PHQ) as a novel sorbent. The impact of various parameters, including sorbent type, sample pH, sample volume, sorbent amount, desorption solvent (type and volume), extraction time, and ionic strength on the extraction efficiency was investigated and optimized. Following the extraction, the desorbed pesticides in acetone were analyzed using gas chromatography with an FID detector. Under the optimized experimental conditions, the proposed method showed excellent linearity in the range of 3-1000 µg/L, low detection limit (0.9-1.5 µg/L), good relative recoveries (86-101.5 %), and high precision (RSD < 6.5 %). Finally, the applicability of this method was evaluated by analyzing the target OPPs in a variety of real samples, and obtained satisfactory results.

Biomass waste-derived magnetic material coated with dual-dummy-template molecularly imprinted polymer for simultaneous extraction of organophosphorus and carbamate pesticides

An eco-friendly biomass waste-derived magnetic material coated with a dual-dummy-template molecularly imprinted polymer was fabricated using aqueous ethanol as a green porogen, lower amounts of toxic compounds as template molecules, and tyrosine and tryptophan as biocompatible binary monomers. The binding characteristics and selectivity of the material toward pesticides were assessed. High adsorption capacities ranging from 150.11 to 509.09 mg g-1 and imprinting factors reaching 2.2 were achieved within just 30 s. The material was applied for extraction of organophosphorus and carbamate pesticides prior to HPLC analysis. Under the optimum conditions, low limits of detection and quantitation were achieved, with ranges of 0.05-1.49 μg/L and 0.18-5.00 μg/L, respectively. The established approach enables efficient analysis of vegetable and fruit samples, yielding satisfactory recoveries ranging between 80 and 110 %. The method showed promise as an analytical method for the sensitive enrichment of pesticide residues in vegetable and fruit samples.

Molecularly imprinted polymer-coated paper for the selective extraction of organophosphorus pesticides from fruits, vegetables, and cereal grains

Biodegradable molecularly imprinted polymer-coated paper (MIP@paper) was effectively produced by polymerization using azinphos-methyl as a template molecule, terephthalic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, and aqueous ethanol as a green porogenic solvent. The material was subsequently composited onto cellulose paper, which served as the natural substrate, by dip coating with the aid of chitosan and citric acid natural adhesive. The properties, such as static and dynamic adsorption, selectivity, and reusability, were assessed. At rapid adsorption equilibrium (10 min), the MIP@paper had a high adsorption capacity in the range of 2.5-3.7 mg g-1 and good recognition with imprinting factors up to 2.1. In addition, the proposed MIP@paper was utilized efficiently as a sorbent for dispersive solid phase extraction (d-SPE) of eight organophosphorus pesticides (OPPs) prior to high-performance liquid chromatography (HPLC) analysis. The d-SPE-HPLC method displayed low detection limits of 1.2-4.5 μg kg-1 and significant enrichment factors (up to 320-fold). The proposed method was effectively applied for the determination of OPP residues in agricultural products, including fruits, vegetables, and cereal grains, with satisfactory spiked recoveries (80.1-119.1 %). Thus, the MIP@paper material provided a selective and environmentally favorable method for extracting and determining organophosphorus pesticides.

Immunoassays and Emerging Analytical Techniques of Fipronil and its Metabolites for Food Safety: A Review

Fipronil, classified as a phenylpyrazole insecticide, is utilized to control agricultural, public health, and veterinary pests. Notably, its unique ecological fate involves degradation to toxic metabolites, which poses the risk of contamination in water and foodstuffs and potential human exposure through the food chain. In response to these concerns, there is a pressing need to develop analytical methodologies for detecting fipronil and its metabolites. This review provides a concise overview of the mode of action, metabolism, and toxicology of fipronil. Additionally, various detection strategies, encompassing antibody-based immunoassays and emerging analytical techniques, such as fluorescence assays based on aptamer/molecularly imprinted polymer/fluorescent probes, electrochemical sensors, and Raman spectroscopy, are thoroughly reviewed and discussed. The focus extends to detecting fipronil and its metabolites in crops, fruits, vegetables, animal-derived foods, water, and bodily fluids. This comprehensive exploration contributes valuable insights into the field, aiming to foster the development and innovation of more sensitive, rapid, and applicable analytical methods.

Trace detection of methcathinone in sewage using targeted extraction based on magnetic molecularly imprinted polymers coupled with liquid chromatography-tandem mass spectrometry

Methcathinone, a new psychoactive substance (NPS), poses a serious threat to public health. Therefore, there is an urgent need to develop a reliable, selective, sensitive and simple analytical technique for monitoring trace amounts of this target NPS in complex matrices. For this purpose, magnetic molecularly imprinted polymers (MMIPs) based on MIPs combined with nano-sized magnetic Fe3O4 were developed for the specific enrichment of methcathinone in wastewater. The binding properties and selectivity of MMIPs toward methcathinone were evaluated and compared with non-imprinted polymer (MNIPs). For sensitive and selective extraction and determination of the target methcathinone, magnetic solid-phase extraction (MSPE) based on MMIPs was combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Under optimized conditions, the proposed method was successfully used for the detection of methcathinone in wastewater, which provided a low limit of detection of 0.3 ng L-1 and a limit of quantification of 1.0 ng L-1 with relative standard deviations of less than 6.89% for intra- and inter-day analyses. Good linearity in the range of 1-2000 ng L-1 with a coefficient of determination (R2) greater than 0.98 was observed. Moreover, a certified reference material of water sample was successfully analyzed with satisfactory results and the recoveries of spike experiments ranged from 96.35-116.7%.

Dispersive magnetic solid phase extraction of triazole fungicides based on polybenzidine/magnetic nanoparticles in environmental samples

A polybenzidine-modified Fe3O4@SiO2 nanocomposite was successfully synthesized through a chemical oxidation method and employed as a novel sorbent in dispersive magnetic solid phase extraction (DMSPE) for the preconcentration and determination of three triazole fungicides (TFs), namely diniconazole, tebuconazole, and triticonazole in river water, rice paddy soil, and grape samples. The synthesis method involved a polybenzidine self-assembly coating on Fe3O4@SiO2 magnetic composite. Characterization techniques such as FT-IR, XRD, FESEM, EDX, and VSM were used to confirm the correctness of the synthesized nano-sorbent. The target TFs were determined in actual samples using the synthesized nanocomposite sorbent in combination with gas chromatography-flame ionization detection (FID). Several variables were carefully optimized , including the sample pH, sorbent dosage, extraction time, ionic strength, and desorption condition (solvent type, volume, and time). Under the optimized experimental conditions, the method exhibited linearity in the concentration range 5-1000 ng mL-1 for triticonazole and 2-1000 ng mL-1 for diniconazole and tebuconazole. The limits of detection (LOD) for the three TFs were in the range 0.6-1.5 ng mL-1. The method demonstrated acceptable precision with intra-day and inter-day relative standard deviation (RSD) values of less than 6.5%. The enrichment factors ranged from 248 to 254. Finally, the method applicability was evaluated by determining TFs in river water, rice paddy soil, and grape samples with recoveries in the range 90.5-106, indicating that the matrix effect was negligible in the proposed DMSPE procedure.

Development of Magnetic Molecularly Imprinted Polymer Coupled Nanospray Ion Source for Analysis of Cephalosporin Antibiotics in Food Samples

A magnetic molecularly imprinted polymer (MMIP) coupled nanospray ion source was developed for analysis of cephalosporin antibiotics in food samples. MIP coated Fe₃O₄ nanospheres were prepared for magnetic solid-phase extraction (MSPE) of the antibiotics in the extract of samples and then integrated into the nanospray capillary for further desorption and mass spectrometry analysis. The developed device combines the advantages of high extraction efficiency of MSPE, unique selectivity of MIPs, and fast analysis speed of ambient ionization mass spectrometry (AIMS). Five cephalosporin antibiotics in milk, egg, and beef samples were analyzed using the developed methods. High sensitivities with limits of detection (LODs) from 0.3 to 0.5 μg kg^-1 were achieved for cephalosporin antibiotics in milk, egg, and beef samples, respectively. Good linearity, determination coefficient values (R² > 0.992), and precision (RSD < 15%) with recoveries ranging from 72.6% to 115.5% were obtained using the spiked milk, egg, and beef sample matrices.

N-doped carbon dots coupled with molecularly imprinted polymers as a fluorescent sensor for ultrasensitive detection of genistein in soya products

Rapid detection of genistein in soya products has remained difficult. Current methods necessitate sample handling and use of costly instruments. Here, using a simple one-pot reverse microemulsion method, a sensor based on N-doped carbon dots conjugated molecularly imprinted polymers (N-CDs@MIPs) was synthesized to analyze genistein. N-doped carbon dots were used as fluorescent component, genistein as the template molecule, and molecularly imprinted polymers as the selective sorbent in this fluorescence sensor. The sensor was then examined and optical studies demonstrated that N-CDs@MIPs not only had strong fluorescence emission and outstanding optical stability, but also had good sensitivity (detection limit 35.7 nM) and selectivity to genistein. Furthermore, the N-CDs@MIPs materials were used to analyze genistein in soya products, and the findings (which ranged from 99.77% to 106.11%) show that the N-CDs@MIPs has high potential for quickly detecting the amount of genistein in complicated food samples.

Highly Efficient Selective Extraction of Chlorpyrifos Residues from Apples by Magnetic Microporous Molecularly Imprinted Polymer Prepared by Reversible Addition-Fragmentation Chain Transfer Surface Polymerization

Chlorpyrifos, as a moderate toxic organophosphorus pesticide, is prone to lingering in the environment and cannot be monitored easily. In this study, a magnetic, microporous, molecularly imprinted polymer was synthesized by using the reversible addition-fragmentation chain transfer polymerization method. The synthesized materials were properly characterized in terms of morphology, selectivity, and sorption capacity and used as sorbents for magnetic solid phase extraction for the selective determination of chlorpyrifos in apple samples. Results showed that the magnetic microporous molecularly imprinted materials were rough and porous spheres at an average size of 5 nm. The materials were highly selective toward chlorpyrifos with a superior sorption capacity of 167.99 mg·g^-1 and were resistant to the interference of competitive pollutants. After optimization, the recoveries of chlorpyrifos reached 96.2-106.5%, and the detection limit was 0.028 μg·kg^-1 by HPLC. Based on these analytical validation results, the developed method could be effective at determining chlorpyrifos in apples.

Precipitation Polymerization: A Powerful Tool for Preparation of Uniform Polymer Particles

Precipitation polymerization (PP) is a powerful tool to prepare various types of uniform polymer particles owing to its outstanding advantages of easy operation and the absence of any surfactant. Several PP approaches have been developed up to now, including traditional thermo-induced precipitation polymerization (TRPP), distillation precipitation polymerization (DPP), reflux precipitation polymerization (RPP), photoinduced precipitation polymerization (PPP), solvothermal precipitation polymerization (SPP), controlled/‘‘living’’ radical precipitation polymerization (CRPP) and self-stabilized precipitation polymerization (2SPP). In this review, a general introduction to the categories, mechanisms, and applications of precipitation polymerization and the recent developments are presented, proving that PP has great potential to become one of the most attractive polymerization techniques in materials science and bio-medical areas.

Rapid and non-invasive surface-enhanced Raman spectroscopy (SERS) detection of chlorpyrifos in fruits using disposable paper-based substrates charged with gold nanoparticle/halloysite nanotube composites

Chlorpyrifos is one of the most widely used organophosphate insecticides in agricultural production. Nevertheless, the residues of chlorpyrifos in agricultural by-product seriously threaten human health. Thus, the ultrasensitive detection of chlorpyrifos residues in agri-food products is of great demand. Herein, an AuNP/HNT-assembled disposable paper SERS substrate was prepared by an electrostatic self-assembly method to detect chlorpyrifos residues. The AuNP/HNT paper substrate exhibited high SERS activity, good reproducibility, and long-term stability, which was successfully used for quantitative detection of chlorpyrifos; the detection limit reached 7.9 × 10^-9 M. For spiked apple samples the calculated recovery was 87.9% with a RSD value of 6.1%. The excellent detection ability of AuNP/HNT paper-based SERS substrate indicated that it will play an important role in pesticide detection in the future. AuNP/HNT assembled disposable paper SERS substrate was prepared by an electrostatic self-assembly method to detect chlorpyrifos residues in fruits.

A Fluorimetric Method Based On Magnetic Molecularly Imprinted Polymer For Selective Detection Of Chlorferon

In the present work, reusable magnetic molecularly imprinted polymers have been used for the first time as an adsorbent for the determination of chlorferon. Magnetic molecularly imprinted polymers have been used for the selective separation of chlorferon from the solution and sensitive fluorimetric determination has been performed using the native fluorescence of chlorferon. The developed method is rapid and determination of chlorferon was completed in an hour. Limit of detection (LOD) of the method was found to be 0.0027 µM and the linearity of the calibration graph was observed within the range of 0.01-0.36 µM (2.5 - 75 µg L^-1). Adsorption isotherms point out the multilayer adsorption and the heterogeneous distribution of binding sites for imprinted polymer and homogeneous binding site for non-imprinted polymer. The adsorption capacities of imprinted polymer and non-imprinted polymer were calculated as 2.03 μmol g^-1 and 0.96 μmol g^-1, respectively and the imprinting factor was found to be 2.11. The interference effects of some organic compounds and characterization studies were also evaluated. The method has been applied to honey and tap water samples and the recoveries were found to be in the range of 91.3 and 101.1 %.

Eco-friendly fabrication of a magnetic dual-template molecularly imprinted polymer for the selective enrichment of organophosphorus pesticides for fruits and vegetables

A magnetic dual-template molecularly imprinted polymer (DMIP) was successfully prepared in an aqueous medium and used as a sorbent for the selective extraction of organophosphorus pesticides prior to analysis by high-performance liquid chromatography (HPLC). The binding properties and selectivity of DMIP toward organophosphorus were evaluated and compared with those of a non-imprinted polymer. The established magnetic dispersive solid-phase extraction (MDSPE) method using DMIP exhibited fast enrichment of the target analytes within 60 s for adsorption and 30 s for desorption. Good linearities in the range of 0.5-2000 μg L^-1 with coefficients of determination (R²) greater than 0.9930 were observed. The method provides low limits of detection of 0.062-0.195 μg L^-1 and limits of quantification of 0.210-0.640 μg L^-1 with relative standard deviations of less than 9.5% for intra- and inter-day analyses. The enrichment factors ranged from 464 to 621. Satisfactory recoveries ranged from 81.3 to 110.0% with relative standard deviations below 11%.