High internal phase emulsions stabilized by native and heat-treated lactoferrin-carboxymethyl chitosan complexes: Comparison of molecular and granular emulsifiers

Lactoferrin-Chitosan Composite Hydrogels Induced by Microbial Transglutaminase: Potential Delivery Systems for Thermosensitive Bioactive Substances

In this work, lactoferrin (LF)-chitosan (CS) composite hydrogels with good loading capacity of thermosensitive bioactive substances were successfully obtained by microbial transglutaminase (MTG)-induced cross-linking. We evaluated the rheological, textural, and microstructural characteristics of the composite hydrogels under different conditions. The results demonstrated that the concentrations of LF and CS as well as the amount of MTG could regulate the textural properties, rheological properties, and water holding capability. The results of FTIR and fluorescence spectroscopy indicated that the main interactions within the composite gel were hydrogen and isopeptide bonds. Additionally, in vitro digestion simulation results verified that riboflavin kept stable in stomach due to the protection of LF-CS composite hydrogels and was released in small intestine. These results suggested that thermosensitive bioactive substance could be encapsulated and delivered by the LF-CS composite hydrogel, which could be applied in lots of potential applications in functional food as a new material.

Soy protein isolate-sodium alginate colloidal particles for improving the stability of high internal phase Pickering emulsions: Effects of mass ratios

The potential of sodium alginate (SA) at different mass ratios to improve the emulsifying ability of soy protein isolate (SPI) in high internal phase Pickering emulsions (HIPPEs) was evaluated in this work. SPI-SA particles were used as a natural particle stabilizer of HIPPEs with 80 % oil phase. The properties of particles with varying SPI to SA ratios (10:0, 10:1, 10:3, 10:5, 10:10, and 10:15 w/w) were evaluated. HIPPEs with a 10:10 SPI to SA ratio exhibited the smallest droplet sizes. Both the storage modulus and loss modulus of the HIPPEs increased with increasing SA addition ratios, implying that HIPPEs with higher SA addition have stronger gel characteristics. In addition, super-resolution microscopy and cryogenic scanning electron microscopy indicated that SA addition strengthened the compactness of the interface film and increased the distribution uniformity of HIPPEs. In conclusion, the combination of SPI and SA is beneficial for improving the performance of HIPPEs.

High-internal-phase emulsions stabilized by alkali-extracted green tea polysaccharide conjugates for curcumin delivery

Exploring the emulsification capabilities of tea polysaccharide conjugates (TPCs) in high-internal-phase emulsions (HIPEs) would further expand the utilization value of TPCs. This study aimed to prepare 0.1-0.5 wt% alkali-extracted green tea polysaccharide conjugate (gTPC-A)-stabilized HIPEs containing 75-87 wt% medium chain triglycerides (MCTs) to investigate their stability, rheology, microstructure, and loading and protective effects on curcumin. The findings revealed that only 0.1 wt% of gTPC-A could stabilize HIPEs containing 85 wt% oil for 30 days. HIPEs had better storage stability in a weakly acidic environment at pH 5.0-6.0 and at temperatures less than 70 °C. HIPEs could load curcumin and protect it from ultraviolet (UV) radiation and in vitro digestion. The half-life of curcumin loaded in HIPEs was 65 h under UV radiation. The curcumin bioaccessibility of HIPEs (56.29 %) was higher than that in MCT (8.73 %). These results provided a theoretical basis for the extensive use of TPCs.

Composite formation of whey protein isolate and OSA starch for fabricating high internal phase emulsion: A comparative study at different pH and their application in biscuits

The composites formed by whey protein isolate (WPI) and octenyl succinate anhydride (OSA)-modified starch were characterized with a focus on the effect of pH, and their potential in fabricating high internal phase emulsions (HIPEs) as fat substitutes was evaluated. The particles obtained at pH 3.0, 6.0, 7.0, and 8.0 presented a nanosized distribution (122.04 ± 0.84 nm-163.24 ± 4.12 nm) while those prepared at pH 4.0 and 5.0 were remarkably larger. Results from the shielding agent reaction and Fourier transform infrared spectroscopy (FT-IR) showed that the interaction between WPI and OSA starch was mainly hydrophobic at pH 3.0-5.0, while there was a strong electrostatic repulsion at pH 6.0-8.0. A quartz crystal microbalance with dissipation (QCM-D) study showed that remarkably higher ΔD and lower Δf/n were observed at pH 3.0-5.0 after successive deposition of WPI and OSA starch, whereas slight changes were noted for those made at higher pH values. The WPI-OSA starch (W-O) composite-based HIPEs made at pH 3.0 and 6.0-8.0 were physically stable after long-term storage, thermal treatment, or centrifugation. Incorporation of HIPE into the biscuit formula yielded products with a desirable sensory quality.

Co-delivery of hydrophobic β-carotene and hydrophilic riboflavin by novel water-in-oleic acid-in-water (W/OA/W) emulsions

Hydrophobic β-carotene and hydrophilic riboflavin offer a wide range of health benefits, but their limited stability and bioaccessibility pose challenges to their use in the food industry. This study developed a water-in-oleic acid-in-water (W/OA/W) emulsion. The effects of internal/external water phase emulsifiers were investigated on their microstructure, encapsulation efficiency, and stability. Only 0.05 wt% soybean-derived phosphatidylcholine was required as a lipophilic emulsifier to produce W/OA/W emulsions that can encapsulate both hydrophobic β-carotene and hydrophilic riboflavin. Compared to the commercial pea protein isolate (PPI), the PPI-xylooligosaccharide conjugate demonstrated superior performance as hydrophilic emulsifiers in stabilizing W/OA/W emulsions. The W/OA/W emulsion co-delivery system improved the thermal stability, light stability, and bioaccessibility of β-carotene, as well as the light stability of riboflavin. Overall, the W/OA/W emulsion holds great promise for application in natural food and for co-delivering hydrophobic and hydrophilic bioactive ingredients.

Understanding the structure, interfacial properties, and digestion fate of high internal phase Pickering emulsions stabilized by food-grade coacervates: Tracing the dynamic transition from coacervates to complexes

Although protein-polysaccharide complexes have shown tremendous potential in stabilizing high internal phase Pickering emulsions (HIPPEs), it is unclear whether coacervates have the same potential to be used as effective Pickering stabilizers. In this study, HIPPEs were prepared by ovalbumin (OVA)-pectin (PE) coacervates during the transition from coacervates to complexes. The results showed that enhanced OVA-PE interactions significantly affected the wettability and surface-tension reduction ability of the OVA-PE coacervates. At pH 2, the coacervate-stabilized HIPPEs exhibited smaller oil droplet sizes (21.3±2.3 μm), tighter droplet packing, and finer solid-like structures through the bridging of droplets and the generation of stronger gel-like network structures to prevent coalescence and lipid oxidation. The gastrointestinal digestion results proved that the OVA-PE coacervates promoted lipid hydrolysis and improved the bioaccessibility (from 19.7±0.7% to 36.5±2%) of curcumin-loaded HIPPEs. Our work provides new ideas for the development of biopolymer particles as effective Pickering stabilizers in the food industry.

pH-Responsive Pickering high internal phase emulsions stabilized by Waterborne polyurethane

HYPOTHESIS

Waterborne polyurethane (WPU) is a common colloidal dispersion that can aggregate in the aqueous phase to form nanoparticles with hydrophobic polyurethane chains as the core and hydrophilic ionic groups as the shell. Considering their structure and pH-responsive functional groups, WPU nanoparticles could be ideal particulate emulsifiers for preparing pH-responsive Pickering high internal phase emulsions (HIPEs).

EXPERIMENTS

A series of anionic WPU with different content of 2,2-bis(hydroxymethyl)propionic acid (DMPA) side chains were synthesized via a polyaddition reaction. The DMPA content, size, ζ-potential, and interfacial behaviors of WPU were then investigated. Furthermore, the effects of particle concentration, internal phase fraction (ϕ), oil type, and pH values on the Pickering HIPEs' morphology, stability, and rheological behaviors were systematically studied. Finally, we demonstrated the emulsification-demulsification process of WPU-stabilized Pickering HIPEs and discussed its mechanism.

FINDINGS

Oil-in-water (O/W) Pickering HIPEs with tailored morphology and excellent pH-responsiveness were prepared from anionic WPU nanoparticles. The WPU concentration, ϕ, and oil type had a large impact on the formation and mean droplet size of the WPU-stabilized emulsions. Rheology analysis demonstrated that the strictly limited movement of droplets endowed the WPU-stabilized HIPEs with high stability, shear sensitivity, and excellent thixotropic recovery. By simply changing the aqueous-phase pH value, the WPU-stabilized HIPEs could undergo more than ten emulsification-demulsification cycles, as the physical and interfacial properties of WPU nanoparticles were pH-dependent. The excellent performance of the WPU-stabilized pH-responsive Pickering HIPEs exhibited their potential practical applications, such as for oil transportation and recovery, emulsion polymerization, and heterogeneous catalysis.