Titanium nanoparticle anchored functionalized MWCNTs for electrochemical detection of ractopamine in porcine samples with ultrahigh sensitivity

A renewable screen-printed electrode based on magnetic NiCo@N-doped carbon nanotubes derived from Co-MOF for ractopamine detection

A renewable electrochemical screen-printed electrode (SPE) is proposed based on magnetic bamboo-like nitrogen-carbon (N-C) nanotubes loaded with nickel-cobalt alloy (NiCo) nanoparticles (NiCo@N-CNTs) for the determination of ractopamine (RAC). During the preparation of NiCo@N-CNTs, Co-MOF-67 (ZIF-67) was firstly synthesized, and then blended with dicyandiamide and nickel acetate, followed by a one-step pyrolysis procedure to prepare NiCo@N-doped carbon nanotubes. The surface morphology, structure, and chemical composition of NiCo@N-CNTs were characterized by SEM, TEM, XRD, XPS, and EDS. The electrocatalytic and electrochemical behavior of NiCo@N-CNTs were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results demonstrated that NiCo@N-CNTs possessed remarkable conductivity and electrocatalysis to the oxidation of ractopamine (RAC). By using screen-printed electrode (SPE), NiCo@N-CNTs, and a designed base support, a magnetic RAC sensor (NiCo@N-CNTs/SPE) was successfully constructed. It presented a detection linear range of 0.05-80 μM with a detection limit of 12 nM (S/N = 3). It also exhibited good sensitivity, reproducibility, and practicability in spiked real pork samples. Since the adhesion of NiCo/N-CNTs on SPE was controlled by magnet, the NiCo@N-CNTs was easily detached from the SPE surface by magnetism and thus displayed excellent renewability. This work broadened insights into portable devices for on-site and real-time analysis.

Helical au nanostructure for SERS detection of hazardous molecular and chiral enantiomers

In recent years, incidents of pesticide pollution and abuse of feed additives have occurred frequently, which pose a great threat to human health. Raman spectroscopy has become an important method in the field of food safety due to its rapidity, simplicity and sensitivity. It is important to obtain complex structure to promote surface-enhanced Raman scattering (SERS) effect. In this study, gold helical nanoparticles with rich surface structure were synthesized using cysteine as induce agent. Notably, the complex helical structure and tip led to an excellent electromagnetic enhancement property. The helical structure showed ultra-sensitive detection of hazardous molecular, such as thiram and ractopamine. Interestingly, the D/L-Au structure had significant chiral optical activity and could be used as an unlabeled SERS platform for enantiomer identification. This study provided an effective strategy for the detection of pesticides and feed additives, which could be applied in other aspects of food safety in the future.

Perovskite Nanocrystals: Superior Luminogens for Food Quality Detection Analysis

With the global limited food resources receiving grievous damage from frequent climate changes and ascending global food demand resulting from increasing population growth, perovskite nanocrystals with distinctive photoelectric properties have emerged as attractive and prospective luminogens for the exploitation of rapid, easy operation, low cost, highly accurate, excellently sensitive, and good selective biosensors to detect foodborne hazards in food practices. Perovskite nanocrystals have demonstrated supreme advantages in luminescent biosensing for food products due to their high photoluminescence (PL) quantum yield, narrow full width at half-maximum PL, tunable PL in the entire visible spectrum, easy preparation, and various modification strategies compared with conventional semiconductors. Herein, we have carried out a comprehensive discussion concerning perovskite nanocrystals as luminogens in the application of high-performance biosensing of foodborne hazards for food products, including a brief introduction of perovskite nanocrystals, perovskite nanocrystal-based biosensors, and their application in different categories of food products. Finally, the challenges and opportunities faced by perovskite nanocrystals as superior luminogens were proposed to promote their practicality in the future food supply.

Core-Satellite Nanoassemblies as SPR/SERS Dual-Mode Plasmonic Sensors for Sensitively Detecting Ractopamine in Complex Media

Highly sensitive and reliable detection of β-adrenergic agonists is especially necessary due to the illegal abuse of growth-promoting feed additives. Here, we develop a novel surface plasmon resonance/surface-enhanced Raman scattering (SPR/SERS) dual-mode plasmonic sensor based on core-satellite nanoassemblies for the highly sensitive and reliable detection of ractopamine (RAC). The addition of RAC results in the decomposition of core-satellite nanoassemblies and consequently changes the Rayleigh scattering color of dark-field microscopy (DFM) images and the Raman scattering intensity of SERS spectra. The excellent sensitivity, specificity, and uniformity of this strategy were confirmed by detecting RAC in various complex media in the farm-to-table chain, and the limit of detection (LOD) was 0.03 ng/mL in an aqueous solution. In particular, the convenient access to livestock sewage not only ensures animal welfare but also provides great convenience for the market regulation of β-agonists. The success of our on-site strategy only with a portable Raman device promises great application prospects for β-agonist detection.

Supramolecular recognition enhanced electrochemical sensing: β-cyclodextrin and Pd nanoparticle co-decorated 3D reduced graphene oxide nanocomposite-modified glassy carbon electrode for the quantification of ractopamine

Ractopamine (RAC) is universally known for improving lean meat percentage in livestock and thus is widely introduced as a feed additive. However, it is difficult to eliminate the RAC residue in animal tissues from the biological system and will inevitably harm human health. Hence, detecting RAC molecules in biological samples is extremely significant. Herein, a novel strategy of supramolecular recognition-enhanced electrochemical sensing is presented. This platform was constructed by coupling β-cyclodextrin (β-CD) with palladium nanoparticles (Pd NPs)-functionalized three-dimensional reduced graphene oxide (3D-rGO) to form a nanocomposite (3D-rGO/Pd/β-CD), which was further used to modify a glassy carbon electrode (GCE) for RAC detection. Benefiting from the attractive electrical conductivity and catalytic activity of 3D-rGO/Pd, as well as the unique small-molecule-recognition ability of β-CD demonstrated by ¹H NMR spectrum, which revealed the 1 : 2 binding mode of RAC with β-CD, increased peak current signals of RAC were observed in the cyclic voltammetry (CV) test. Under optimized conditions, the wide linear concentration range spanned 1-95 μM, along with a relatively low detection limit of 0.12 μM (S/N = 3), as evidenced by the differential pulse voltammetry (DPV) approach. The platform also exhibited satisfactory stability and fine reproducibility, as well as high selectivity and good anti-interference capability. Moreover, this as-obtained sensor was efficiently applied in pork samples with a high recovery rate (96.44-103.99%), which provides a promising view of its electrochemical biosensing ability in practical applications.

Efficient detection of metronidazole by a glassy carbon electrode modified with a composite of a cyclotriveratrylene-based metal-organic framework and multi-walled carbon nanotubes

Constructing a sensitive and efficient sensor for determination of metronidazole (MNZ) is crucial in food field. Herein, a new cyclotriveratrylene-based metal-organic framework (MOF), namely, [Cd₆L₂(cyclen)₂(H₂O)₂] (1), was constructed by self-assembly of functionalized 5,6,12,13,19,20-hexacarboxy-propoxy-cyclotriveratrylene (H₆L), 1,4,7,10-tetraazacyclododecane (cyclen) and Cd(II) cation under solvothermal condition. In 1, adjacent Cd(II) cations are linked by L^6- to produce a 2D polymeric structure with carboxylate and phenolic oxygen atoms. To enhance conductivity of 1, it was combined with conducting carbon materials, including mesoporous carbon (MC), reduced graphene oxide (RGO) and multi-walled carbon nanotubes (MWCNT), respectively, producing a series of composite materials. Remarkably, electrochemical tests showed that 1@MWCNT(1:1) featured a much better electrochemical detection performance for metronidazole (MNZ) than 1@MC and 1@RGO. The linear range for the detection of MNZ is up to 0.4-500 μM and the limit of detection (LOD) for MNZ reached 0.25 μM. Importantly, the fabricated sensor 1@MWCNT(1:1) was employed for the detection of MNZ in honey and egg with satisfactory result. High-performance liquid chromatography (HPLC) validated the high accuracy of the electrochemical method for the determination of honey and egg.

Three-Dimensional Electrochemical Sensors for Food Safety Applications

Considering the increasing concern for food safety, electrochemical methods for detecting specific ingredients in the food are currently the most efficient method due to their low cost, fast response signal, high sensitivity, and ease of use. The detection efficiency of electrochemical sensors is determined by the electrode materials' electrochemical characteristics. Among them, three-dimensional (3D) electrodes have unique advantages in electronic transfer, adsorption capacity and exposure of active sites for energy storage, novel materials, and electrochemical sensing. Therefore, this review begins by outlining the benefits and drawbacks of 3D electrodes compared to other materials before going into more detail about how 3D materials are synthesized. Next, different types of 3D electrodes are outlined together with common modification techniques for enhancing electrochemical performance. After this, a demonstration of 3D electrochemical sensors for food safety applications, such as detecting components, additives, emerging pollutants, and bacteria in food, was given. Finally, improvement measures and development directions of electrodes with 3D electrochemical sensors are discussed. We think that this review will help with the creation of new 3D electrodes and offer fresh perspectives on how to achieve extremely sensitive electrochemical detection in the area of food safety.

Nanoengineered disposable sensor fabricated with lanthanum stannate nanocrystallite for detecting animal feed additive: Ractopamine

Ractopamine (RA) has been at the forefront of feed additives as a nutrient repartitioning mediator that recuperates the growth rate, decreases animal fat, and guarantees food safety. However, inappropriate and abusive usage of RA to enhance economic efficiency can negatively impact the environment-animal-human interactions. Therefore, the call for monitoring and quantifying RA is highly desired. In this work, the potentiality of La₂Sn₂O₇ as an electrode modifier on the surface of the portable screen-printed carbon electrode (SPCE) was examined for its precision, disposability, and ability to detect RA. The superior electrocatalytic activity of the fabricated La₂Sn₂O₇/SPCE fortifies its standpoints by displaying a wide linear working range of 0.01-501.2 µM, an enhanced sensitivity, a better stability, a lower LOD of 0.86 nM, and an increased selectivity toward the detection of RA. Furthermore, the investigation of the constructed electrochemical sensor with real-time food samples underpins its practicality and feasibility.

Direct Electrochemistry of Glucose Dehydrogenase-Functionalized Polymers on a Modified Glassy Carbon Electrode and Its Molecular Recognition of Glucose

A glucose biosensor was layer-by-layer assembled on a modified glassy carbon electrode (GCE) from a nanocomposite of NAD(P)⁺-dependent glucose dehydrogenase, aminated polyethylene glycol (mPEG), carboxylic acid-functionalized multi-wall carbon nanotubes (fMWCNTs), and ionic liquid (IL) composite functional polymers. The electrochemical electrode was denoted as NF/IL/GDH/mPEG-fMWCNTs/GCE. The composite polymer membranes were characterized by cyclic voltammetry, ultraviolet-visible spectrophotometry, electrochemical impedance spectroscopy, scanning electron microscopy, and transmission electron microscopy. The cyclic voltammogram of the modified electrode had a pair of well-defined quasi-reversible redox peaks with a formal potential of -61 mV (vs. Ag/AgCl) at a scan rate of 0.05 V s^-1. The heterogeneous electron transfer constant (k_s) of GDH on the composite functional polymer-modified GCE was 6.5 s^-1. The biosensor could sensitively recognize and detect glucose linearly from 0.8 to 100 µM with a detection limit down to 0.46 μM (S/N = 3) and a sensitivity of 29.1 nA μM^-1. The apparent Michaelis-Menten constant (Kmapp) of the modified electrode was 0.21 mM. The constructed electrochemical sensor was compared with the high-performance liquid chromatography method for the determination of glucose in commercially available glucose injections. The results demonstrated that the sensor was highly accurate and could be used for the rapid and quantitative determination of glucose concentration.

Au Nanoparticles Functionalized Covalent-Organic-Framework-Based Electrochemical Sensor for Sensitive Detection of Ractopamine

Ractopamine, as a feed additive, has attracted much attention due to its excessive use, leading to the damage of the human nervous system and physiological function. Therefore, it is of great practical significance to establish a rapid and effective method for the detection of ractopamine in food. Electrochemical sensors served as a promising technique for efficiently sensing food contaminants due to their low cost, sensitive response and simple operation. In this study, an electrochemical sensor for ractopamine detection based on Au nanoparticles functionalized covalent organic frameworks (AuNPs@COFs) was constructed. The AuNPs@COF nanocomposite was synthesized by in situ reduction and was characterized by FTIR spectroscopy, transmission electron microscope and electrochemical methods. The electrochemical sensing performance of AuNPs@COF-modified glassy carbon electrode for ractopamine was investigated using the electrochemical method. The proposed sensor exhibited excellent sensing abilities towards ractopamine and was used for the detection of ractopamine in meat samples. The results showed that this method has high sensitivity and good reliability for the detection of ractopamine. The linear range was 1.2-1600 μmol/L, and the limit of detection (LOD) was 0.12 μmol/L. It is expected that the proposed AuNPs@COF nanocomposites hold great promise for food safety sensing and should be extended for application in other related fields.

A non-enzymatic, biocompatible electrochemical sensor based on N-doped graphene quantum dot-incorporated SnS2 nanosheets for in situ monitoring of hydrogen peroxide in breast cancer cells

The current study reports the design and construction of enzyme-free sensor using N-doped graphene quantum dots (N-GQDs)-decorated tin sulfide nanosheets (SnS₂) for in situ monitoring of H₂O₂ secreted by human breast cancer cells. N-GQDs nanoparticles having a size of less than 1 nm were incorporated into SnS₂ nanosheets to form an N-GQDs@SnS₂ nanocomposite using a simple hydrothermal approach. The resulting hybrid material was an excellent electrocatalyst for the reduction of H₂O₂, owing to the combined properties of highly conductive N-GQDs and SnS₂ nanosheets. The N-GQDs@SnS₂-based sensing platform demonstrated substantial sensing ability, with a detection range of 0.0125-1128 µM and a limit of detection of 0.009 µM (S/N = 3). The sensing performance of N-GQDs@SnS₂ was highly stable, selective, and reproducible. The practical application of the N-GQDs@SnS₂ sensor was successfully demonstrated by quantifying H₂O₂ in lens cleaner, human urine, and saliva samples. Finally, the N-GQDs@SnS₂ electrode was successfully applied for the real-time monitoring of H₂O₂ released from breast cancer cells and mouse fibroblasts. This study paves the way to designing efficient non-enzymatic electrochemical sensors for various biomolecule detection using a simple method.

Biochar-supported Cu nanocluster as an electrochemical ultrasensitive interface for ractopamine sensing

•

Carbon confined Cu nanoclusters (CuNCs@CNFs) were fabricated for the enhanced sensing performance of ractopamine (RAC).

•

The CuNCs@CNFs expressed ultrasensitivity and high selectivity in the electrochemical detection of RAC.

•

A wide linear range and low LOD of RAC was obtained using CuNCs@CNFs based RAC sensor.

•

The established RAC sensor was successfully used in sensitive detection of RAC in meat samples.

Electrochemical sensors actually involve an electrocatalytic process involving an efficient and selective energy conversion that is related to the morphology and size of the interface of the modified materials. Ultrasmall nanoclusters or single atoms generate a greater catalytic ability than normal nanomaterials. In this study biochar-supported Cu nanoclusters (CuNCs@CNFs) were fabricated via a carbon confinement synthesis method toward ultrasensitive electrochemical sensing of ractopamine (RAC). RAC is a β-adrenergic receptor agonist that is illegally used as a feed additive to significantly improve muscle accretion, resulting in RAC accumulation in meat-based food products. The unique structure of CuNCs@CNFs and the interconnectivity between the CuNCs and the CNFs enable the nanocomposite to significantly enhance conductivity and electrocatalytic activity. Using the CuNCs@CNFs-based sensor, RAC was determined with a high sensitivity of 1641 μA μM⁻¹ cm⁻². The feasibility of detecting RAC in spiked meat samples was also carried out with satisfactory recoveries ranging from 91.39 % to 94.58 %.