Preparation of highly stable oleogel-based nanoemulsions for encapsulation and controlled release of curcumin

Lipid-based nanodelivery systems of curcumin: Recent advances, approaches, and applications

Despite its many beneficial effects, pharmaceutical applications of curcumin (CUR) are limited due to its chemical instability, low solubility/absorption and weak bioavailability. Recent advances in nanotechnology have enabled the development of CUR-loaded nanodelivery systems to tackle those issues. Within many different nanocarriers developed for CUR up to date, lipid-based nanocarriers (LBNs) are among the most extensively studied systems. LBNs such as nanoemulsions, solid lipid carriers, nanostructured phospholipid/surfactant carriers are shown to be potential delivery systems capable of improving the solubility, bioavailability, and chemical stability of CUR. The particle characteristics, stability, bioavailability, and release properties of CUR-loaded LBNs can be tailored via optimizing the formulation and processing parameters. This paper reviews the most recent studies on the development of various CUR-loaded LBNs. Approaches to the improvement of CUR bioavailability and release characteristics of LBNs are discussed. Furthermore, challenges in the development of CUR-loaded LBNs and their potential applications are presented.

Functionalized xanthohumol nanoemulsion: fabrication, characterization and bioavailability enhancement of bioactive compounds

BACKGROUND

Xanthohumol is an isopentadienyl flavonoid in hops, which have several pharmacological effects. However, due to the poor bioavailability of xanthohumol, it cannot be widely used.

RESULT

In this study, solvent extraction combined with preparative liquid chromatography was used to separate and purify xanthohumol in hop residue. And the purity, yield and recovery of xanthohumol was 983.0 ± 2.1 g kg-1, 921.61 ± 5.65 g kg-1, and 5.41 ± 0.07 g kg-1, respectively. Response surface methodology optimization revealed that 216.75 g kg-1 ethyl oleate, 574.1 g kg-1 polyoxyl-35 castor oil (EL35) and 209.15 g kg-1 polyethylene glycol 200 (PEG200) produced the xanthohumol nanoemulsion with a loading capacity of 85.40 ± 0.33 g kg-1, mean droplet diameter of 42.35 ± 0.06 nm, and zeta potential of -21.78 ± 0.18 mV.

CONCLUSION

Xanthohumol nanoemulsion has better relative stability. The relative oral bioavailability of xanthohumol nanoemulsion was increased by 1.76 times. These results provide a theoretical basis for the application of nanoemulsion containing xanthohumol in food and pharmaceutical industry. © 2024 Society of Chemical Industry.

Bioactive compounds delivery and bioavailability in structured edible oils systems

The health benefits of bioactive compounds are dependent on the amount of intake as well as on the amount of these compounds that become bioavailable and bioaccessible. Various systems have been developed to deliver and increase the bioaccessibility of bioactive compounds. This review explores the impact of gelled (oleogels, bigels, emulgels, emulsions, hydrogels, and hydrogel beads), micro-(gels, particles, spheres, capsules, emulsions, and solid lipid microparticles) and nanoencapsulated systems (nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, liposomes, and nanoliposomes) on the digestibility and bioavailability of lipophilic and hydrophilic bioactives. Structurant molecules, the oil type, antioxidants, emulsifiers, and coatings in delivery systems with promising potential in food applications are critically discussed. The release and bio-accessibility of bioactive compounds in gelled systems are influenced by various factors, such as the type and concentration of gelators, the gelator-to-oil ratio, the type of antioxidant, the network of the system, and its hydrophobicity. The stability, bioaccessibility, and controlled release of bioactives were improved in structured emulsions. Several variables, including wall material, oil/water ratios, encapsulation process, and pH conditions, can affect the bioactives release in microencapsulated systems. Factors like coating type and core-to-wall ratio impact the stability and release of core components. The encapsulating material, the encapsulation technology, and the nature of the nanomaterials all have an impact on the bioaccessibility of nanoencapsulated systems. Nanoliposomes provide enhanced stability and absorption. In general, all encapsulated systems have shown great potential in improving the distribution and availability of bioactive compounds.

Investigating the Emulsifying Mechanism of Stereoisomeric Sugar Fatty Acyl Molecular Gelators

The emulsifying mechanism of supramolecular stereoisomeric sugar fatty acyl molecular gelators was evaluated. In-house-synthesized mannitol dioctanoate (M8) and sorbitol dioctanoate (S8) were tested. The stereoisomeric difference between the sugar groups significantly affected the gelation and emulsifying properties of the gelators. M8 and S8 formed oleogels at 2 and 3.5% (w/v) and emulsified water up to 30 and 60% (v/v), respectively. Microscopy showed that the gelator fibers are at the W/O interfaces, demonstrating a solid particle or network mode of stabilization. The long fibers of M8 were unable to completely encompass the water droplets, resulting in poor emulsification. Small, hair-like fibers of S8 showed better emulsification. When sunflower wax (SFW, 1% w/v) was added as a coemulsifier, synergetic action between the wax and S8 improved the stability of emulsions. Such synergy was not seen between SFW and M8, henceforth emulsion stability was not improved. This study proved that a subtle stereoisomeric difference at the molecular level can greatly alter the supramolecular and emulsifying properties of sugar-fatty acyl compounds.

Novel organic-inorganic composite pea protein silica food-grade aerogel materials: Fabrication, mechanisms, high oil-holding property and curcumin delivery capacity

The fragility of the skeleton and poor bioaccessibility limit Silica aerogel's application in the food industry. In this study, composite gels were obtained by cross-linking pea proteins isolate (PPI) with Tetraethoxysilane (TEOS)to improve the bioavailability of silica-derived aerogels. It indicated that TEOS first condensed with H+ to form secondary particles and then complexed with PPI via hydroxyl groups to form a composite aerogel. Meanwhile, the PPI-Si composite aerogel formed a dense mesoporous structure with a specific surface area of 312.5 g/cm3. This resulted in a higher oil holding percentage of 89.67 % for the PPI (10 %)-Si aerogel, which was 34.1 % higher than other studies, leading to a more stable oleogel. Finally, as a delivery system, the composite oleogel not only could significantly increase the bioaccessibility rate by 27.4 % compared with silica aerogel, but also could efficiently inhibit the premature release of curcumin in the simulated gastric fluids, while allowed sustainably release in the simulated intestinal fluids. These results provided a theoretical basis for the application of silica-derived aerogels in food and non-food applications.

Oleogel classification, physicochemical characterization methods, and typical cases of application in food: a review

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

Oleogel-Based Nanoemulsions for Beverages: Effect of Self-Assembled Fibrillar Networks on Stability and Release Properties of Emulsions

Reducing the use of stabilizers is one of the main challenges in food emulsions, especially for beverages. This work aimed to produce oleogel-structured nanoemulsions (NEs) without additional surfactants. Lecithin-stearic acid (LSa) and lecithin-sorbitan tristearate (LSt) oleogels formed stable NEs under optimized sonication conditions. Microscopy and rheometry revealed that the presence of self-assembled fibrous networks (SAFiNs) in both dispersed and continuous phases provided steric stabilization to NEs. Lecithin acted as crystal habit modifier of SAFiNs and facilitated their phase partitioning. Notably, the short fibers of LSt showed better emulsifying efficiency than the long fibers of LSa. Curcumin release studies under simulated gastrointestinal conditions demonstrated that SAFiNs affect the release capabilities of NEs. Polydispersity index, zeta potential and oil syneresis data showed that the emulsions are stable for six months. Moreover, NEs showed thermal stability upon curcumin release at 25 and 50 °C. These results suggest that the developed oleogel-based NEs are suitable for the delivery of bioactive agents for beverages and other food applications.

Recent advances in delivering free or nanoencapsulated Curcuma by-products as antimicrobial food additives

Food commodities are often contaminated by microbial pathogens in transit or during storage. Hence, mitigation of these pathogens is necessary to ensure the safety of food commodities. Globally, researchers used botanicals as natural additives to preserve food commodities from bio-deterioration, and advances were made to meet users' acceptance in this domain, as synthetic preservatives are associated with harmful effects to both consumers and environments. Over the last century, the genus Curcuma has been used in traditional medicine, and its crude and nanoencapsulated essential oils (EOs) and curcuminoids were used to combat harmful pathogens that deteriorate stored foods. Today, more research is needed for solving the problem of pathogen resistance in food commodities and to meet consumer demands. Therefore, Curcuma-based botanicals may provide a source of natural preservatives for food commodities that satisfy the needs both of the food industry and the consumers. Hence, this article discusses the antimicrobial and antioxidant properties of EOs and curcuminoids derived from the genus Curcuma. Further, the action modes of Curcuma-based botanicals are explained, and the latest advances in nanoencapsulation of these compounds in food systems are discussed alongside knowledge gaps and safety assessment where the focus of future research should be placed.

Development of Gelled-Oil Nanoparticles for the Encapsulation and Release of Berberine

In this study, a new drug carrier based on gelled-oil nanoparticles (GNPs) was designed and synthesized for the encapsulation and release of the model hydrophobic drug, berberine chloride (BCl). Two compositions with different oil phases were examined, sesame oil (SO) and cinnamaldehyde (Cin), which were emulsified with water, stabilized with Tween 80 (Tw80), and gelled using an N-alkylated primary oxalamide low-molecular-weight gelator (LMWG) to give stable dispersions of GNPs between 100 and 200 nm in size. The GNP formulation with Cin was significantly favored over SO due to (1) lower gel melting temperatures, (2) higher gel mechanical strength, and (3) significantly higher solubility, encapsulation efficiency, and loading of BCl. Also, the solubility and loading of BCl in Cin were significantly increased (at least 7-fold) with the addition of cinnamic acid. In vitro release studies showed that the release of BCl from the GNPs was independent of gelator concentration and lower than that for BCl solution and the corresponding nanoemulsion (no LWMG). Also, cell internalization studies suggested that the N-alkylated primary oxalamide LMWG did not interfere with the internalization efficiency of BCl into mouse mast cells. Altogether, this work demonstrates the potential use of these new GNP formulations for biomedical studies involving the encapsulation of drugs and nutraceuticals and their controlled release.

A Heat Transfer Model and Supporting Experiments to Guide the Uniform Gelation of Molecular Oleogels During Scale-up

The quest for novel vegetable oil structuring strategies has been progressing since the discovery of the deleterious impacts of trans fats. Although oleogelation using bioderived molecular gelators has been proven to be successful as an alternative to traditional hydrogenation methods, efforts are needed to meet the industrial requirements. A major constraint during the fabrication of oleogels is to achieve consistency in physical properties during scale-up. Experiments showed that gelation fails to occur when larger volumes were prepared based on the minimum gelation concentration (MGC) of gelators, determined using the smallest oil volume (1 mL), a general laboratory practice. This observation was consistent with all the molecular gelators used in this study; sorbitol dioctanoate, mannitol dioctanoate, and 12-hydroxystearic acid. To understand this behavior, a mathematical model was developed since gelator network propagation is governed by the cooling rate. The model indicates that maintenance of a minimal thermal gradient via uniform heat dissipation and gelation time is necessary to achieve homogeneous gel propagation across the vial. With these predictions, we hypothesized and confirmed that oleogels with constant surface area-to-volume ratio could result in identical gelation times and consistent physical properties (MGC, melting temperature, melting enthalpy, yield stress, solid phase content, and oil binding capacity) during scale-up.

Rapidly separable microneedle patch for the controlled and sustained release of 5-fluorouracil

5-Fluorouracil (5-FU) is frequently used in the treatment of tumors and swollen tissues. However, traditional administration methods can result in poor patient compliance and require to administrate frequently due to the short T_1/2 of 5-FU. Herein, the 5-FU@ZIF-8 loaded nanocapsules were prepared using multiple emulsion solvent evaporation methods to enable the controlled and sustained release of 5-FU. To decrease the drug release rate and enhance patient compliance, the obtained pure nanocapsules were added to the matrix to fabricate rapidly separable microneedles (SMNs). The entrapment efficiency (EE%) of 5-FU@ZIF-8 loaded nanocapsules was in the range of 41.55-46.29 %, and the particle size of ZIF-8, 5-FU@ZIF-8, and 5-FU@ZIF-8 loaded nanocapsules were 60 nm, 110 nm, and 250 nm respectively. According to the release study in vivo and in vitro, we concluded that 5-FU@ZIF-8 nanocapsules could achieve the sustained release of 5-FU and that the burst release of nanocapsules could be elegantly handled by incorporating nanocapsules into the SMNs. What's more, the use of SMNs could improve patient compliance due to the rapid separation of needles and backing of SMNs. The pharmacodynamics study also revealed that the formulation would be a better choice for the treatment of scars due to the advantages of painlessness, separation ability, and high delivery efficiency. In conclusion, the SMNs containing 5-FU@ZIF-8 loaded nanocapsules could serve as a potential strategy for some skin diseases therapy with controlled and sustained drug release behavior.

Ultrasonic Treatment of Food Colloidal Systems Containing Oleogels: A Review

The use of oleogels as an alternative to solid fats to reduce the content of saturated and trans-isomeric fatty acids is a developing area of research. Studies devoted to the search for methods of obtaining oleogels with given properties are of current interest. Ultrasonic treatment as a method for modifying oleogel properties has been used to solve this problem. The number of publications on the study of the effect of ultrasonic treatment on oleogel properties is increasing. This review aimed to systematize and summarize existing data. It allowed us to identify the incompleteness of this data, assess the effect of ultrasonic treatment on oleogel properties, which depends on various factors, and identify the vector of this direction in the food industry. A more detailed description of the parameters of ultrasonic treatment is needed to compare the results between various publications. Ultrasonic treatment generally leads to a decrease in crystal size and an increase in oil-binding capacity, rheological properties, and hardness. The chemical composition of oleogels and the concentration of gelators, the amplitude and duration of sonication, the cooling rate, and the crystallization process stage at which the treatment occurs are shown to be the factors influencing the efficiency of the ultrasonic treatment.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Preparation and Characterization of Novel Oleogels Using Jasmine Floral Wax and Wheat Germ Oil for Oral Delivery of Curcumin

Oleogels (OGs) have gained a lot of interest as a delivery system for a variety of pharmaceuticals. The current study explains the development of jasmine floral wax (JFW) and wheat germ oil (WGO)-based OGs for oral drug (curcumin) delivery application. The OGs were made by dissolving JFW in WGO at 70 °C and cooling it to room temperature (25 °C). The critical gelation concentration of JFW that induces the gelation of WGO was found to be 10% (w/w). The OGs were characterized using various techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), microscopic analysis, and mechanical test. XRD data indicated that JFW influences the crystallinity of the OGs. Among the prepared OGs, OG 17.5 showed higher crystallization in the series. Optical microscopic studies demonstrated the formation of fiber structures due to the entanglement of crystals whereas, polarized light micrographs suggested the formation of spherulites or clustered crystallite structures. The mechanical properties of the OGs increased linearly with the increase in the JFW concentration. Curcumin-loaded OGs were examined for their controlled release applications. In summary, the developed OGs were found to have the necessary features for modulating the oral delivery of curcumin.