Green synthesis of polydopamine functionalized magnetic mesoporous biochar for lipase immobilization and its application in interesterification for novel structured lipids production

Immobilization of pancreatin based on ultrasound-assisted polydopamine functionalized magnetic porous chitosan for the detoxification of ochratoxin A in wine

Ochratoxin A (OTA) is a mycotoxin that globally contaminates fruits and their products. Since OTA have a huge negative impact on health hazards and economic losses, it is imperative to establish an effective and safe strategy for detoxification. Here, pancreatin was immobilized on the surface of polydopamine functionalized magnetic porous chitosan (MPCTS@ PDA) for the degradation of OTA. Compared with free pancreatin, MPCTS@ PDA@ pancreatin displayed excellent thermal stability, acid resistance, storage stability and OTA detoxification in wine (>58%). Moreover, the MPCTS@ PDA@ pancreatin retained 43% initial activity after 8 reuse cycles. There was no significant change in the quality of wine after MPCTS@ PDA@ pancreatin treatment. Moreover, it did not exhibit cytotoxicity which facilitated its application in wine. These results demonstrated that MPCTS@ PDA@ pancreatin can be used as a highly effective biocatalysate for OTA detoxification in wine.

Enhancing the Thermostability and Catalytic Activity of the Lipase from Rhizopus oryzae via Introducing N-Glycosylation

Lipase from Rhizopus oryzae (ROL) exhibits remarkable sn-1,3 stereoselectivity and catalytic activity, but its poor thermostability limits its applications in the production of 1,3-dioleoyl-2-palmitoyl glycerol (OPO, a high-quality substitute for human milk fat). In this work, a semirational method was proposed to engineer the thermostability and catalytic activity of 4M (ROL mutant in our previous study). First, a computer-aided design is performed using 4M as a template, and N-glycosylation mutants are then recombinantly expressed and screened in Pichia pastoris, the optimal mutant N227 exhibited a half-life of 298.8 h at 45 °C, which is 7.23-folds longer than that of 4M. Its catalytic activity also reached 1043.80 ± 61.98 U/mg, representing a 29.2% increase compared to 4M (808.02 ± 47.02 U/mg). Molecular dynamics simulations of N227 suggested that the introduction of glycan enhanced the protein rigidity, while the strong hydrogen bonds formed between the glycan and the protein stabilized the lipase structure, thereby improving its thermostability. The acidolysis reaction between oleic acid (OA) and glycerol tripalmitate (PPP) was successfully carried out using immobilized N227, achieving a molar conversion rate of 90.2% for PPP. This engineering strategy guides the modification of lipases, while the glycomutants obtained in this study have potential applications in the biosynthesis of OPO.

Lipases for targeted industrial applications, focusing on the development of biotechnologically significant aspects: A comprehensive review of recent trends in protein engineering

Lipases are remarkable biocatalysts, adept at catalyzing the breakdown of diverse compounds into glycerol, fatty acids, and mono- and di-glycerides via hydrolysis. Beyond this, they facilitate esterification, transesterification, alcoholysis, acidolysis, and more, making them versatile in industrial applications. In industrial processes, lipases that exhibit high stability are favored as they can withstand harsh conditions. However, most native lipases are unable to endure adverse conditions, making them unsuitable for industrial use. Protein engineering proves to be a potent technology in the development of lipases that can function effectively under challenging conditions and fulfill criteria for various industrial processes. This review concentrated on new trends in protein engineering to enhance the diversity of lipase genes and employed in silico methods for predicting and comprehensively analyzing target mutations in lipases. Additionally, key molecular factors associated with industrial characteristics of lipases, including thermostability, solvent tolerance, catalytic activity, and substrate preference have been elucidated. The present review delved into how industrial traits can be enhanced through directed evolution (epPCR, gene shuffling), rational design (FRESCO, ASR), combined engineering strategies (i.e. CAST, ISM, and FRISM) as protein engineering methodologies in contexts of biodiesel production, food processing, and applications of detergent, pharmaceutics, and plastic degradation.

Immobilized Dipeptidase in Manganese Ion-Loaded Polyethylenimine-Induced Calcium Phosphate Nanocrystals for Carnosine Synthesis

Carnosine is a natural bioactive dipeptide with important physiological functions widely used in food and medicine. Dipeptidase (PepD) from Serratia marcescens can catalyze the reverse hydrolytic reaction of β-alanine with l-histidine to synthesize carnosine in the presence of Mn2+. However, it remains challenging to practice carnosine biosynthesis due to the low activity and high cost of the enzyme. Therefore, the development of biocatalysts with high activity and stability is of significance for carnosine synthesis. Here, we proposed to chelate Mn2+ to polyethylenimine (PEI) that induced rapid formation of calcium phosphate nanocrystals (CaP), and Mn-PEI@CaP was used for PepD immobilization via electrostatic interaction. Mn-PEI@CaP as the carrier enhanced the stability of the immobilized enzyme. Moreover, Mn2+ loaded in the carrier acted as an in situ activator of the immobilized PepD for facilitating the biocatalytic process of carnosine synthesis. The as-prepared immobilized enzyme (PepD-Mn-PEI@CaP) kept similar activity with free PepD plus Mn2+ (activity recovery, 102.5%), while exhibiting elevated thermal stability and pH tolerance. Moreover, it exhibited about two times faster carnosine synthesis than the free PepD system. PepD-Mn-PEI@CaP retained 86.8% of the original activity after eight cycles of batch catalysis without the addition of free Mn2+ ions during multiple cycles. This work provides a new strategy for the co-immobilization of PepD and Mn2+, which greatly improves the operability of the biocatalysis and demonstrates the potential of the immobilized PepD system for efficient carnosine synthesis.

Tailoring the interfacial microenvironment of magnetic metal-organic frameworks using amino-acid-based ionic liquids for lipase immobilization

Modifying the carrier interface is a promising method to improve the microenvironment of immobilized enzymes and enhance their activity and stability. In this work, using proline as amino acid, magnetic metal-organic frameworks (MOFs) were modified with an amino-acid-based ionic liquid (AAIL) with two hydroxyl groups followed by adsorption of porcine pancreatic lipase (PPL). The activity recovery of the prepared immobilized lipase (MMOF-AAIL/PPL) was up to 162 % higher than that of MMOF-PPL (70.8 %). The Michaelis constant of MMOF-AAIL/PPL was 0.0742 mM lower than that of MMOF-PPL, but the catalytic efficiency was 0.0223 min-1 which was higher than MMOF-PPL. Furthermore, MMOF-AAIL/PPL maintained 85.6 % residual activity after stored for 40 days and its residual activity was 71.9 % while that for MMOF-PPL was 58.8 % after incubated in 6 M urea for 2 h. Particularly, after ten consecutive cycles, the residual activity of MMOF-AAIL/PPL still reached 84.4 %. In addition, the magnetic properties of the support facilitate the separation process which improves the utilization efficiency of immobilized enzymes.

Multi-point immobilization of GH 11 endo-β-1,4-xylanase on magnetic MOF composites for higher yield of xylo-oligosaccharides

GH 11 endo-β-1,4-xylanase (Xy) was a crucial enzyme for xylooligosaccharides (XOS) production. The lower reusability and higher cost of purification has limited the industrial application of Xy. Addressing these challenges, our study utilized various immobilization techniques, different supports and forces for Xy immobilization. This study presents a new method in the development of Fe3O4@PDA@MOF-Xy which is immobilized via multi-point interaction forces, demonstrating a significant advancement in protein loading capacity (80.67 mg/g), and exhibiting remarkable tolerance to acidic and alkaline conditions. This method significantly improved Xy reusability and efficiency for industrial applications, maintaining 60 % activity over 10 cycles. Approximately 23 % XOS production was achieved by Fe3O4@PDA@MOF-Xy. Moreover, the yield of XOS from cobcorn xylan using this system was 1.15 times higher than that of the free enzyme system. These results provide a theoretical and applicative basis for enzyme immobilization and XOS industrial production.

Characterization of a recombinant Aspergillus niger GZUF36 lipase immobilized by ionic liquid modification strategy

Enzyme immobilized on magnetic nanomaterials is a promising biocatalyst with efficient recovery under applied magnets. In this study, a recombinant extracellular lipase from Aspergillus niger GZUF36 (PEXANL1) expressed in Pichia pastoris GS115 was immobilized on ionic liquid-modified magnetic nano ferric oxide (Fe3O4@SiO2@ILs) via electrostatic and hydrophobic interaction. The morphology, structure, and properties of Fe3O4@SiO2@ILs and immobilized PEXANL1 were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray diffraction, vibration sample magnetometer, and zeta potential analysis. Under optimized conditions, the immobilization efficiency and activity recovery of immobilized PEXANL1 were 52 ± 2% and 122 ± 2%, respectively. The enzymatic properties of immobilized PEXANL1 were also investigated. The results showed that immobilized PEXANL1 achieved the maximum activity at pH 5.0 and 45 °C, and the lipolytic activity of immobilized PEXANL1 was more than twice that of PEXANL1. Compared to PEXANL1, immobilized PEXANL1 exhibited enhanced tolerance to temperature, metal ions, surfactants, and organic solvents. The operation stability experiments revealed that immobilized PEXANL1 maintained 86 ± 3% of its activity after 6 reaction cycles. The enhanced catalytic performance in enzyme immobilization on Fe3O4@SiO2@ILs made nanobiocatalysts a compelling choice for bio-industrial applications. Furthermore, Fe3O4@SiO2@ILs could also benefit various industrial enzymes and their practical uses. KEY POINTS: • Immobilized PEXANL1 was confirmed by SEM, FT-IR, and XRD. • The specific activity of immobilized PEXANL1 was more than twice that of PEXANL1. • Immobilized PEXANL1 had improved properties with good operational stability.

Covalent immobilization of lipase on magnetic biochar for one-pot production of biodiesel from high acid value oil

Magnetic biochar was synthesized via chelation of Fe3+ with carboxymethyl cellulose and pyrolysis for covalently immobilizing Eversa® Transform lipase. The magnetic biochar had 75.8 mg/g lipase loading that was 54.1 % higher than that without magnetism. The immobilized lipase achieved 91.3 mg/g lipase loading with 19.2 U/mg lipase activity after optimization. It showed good thermal and acid stability with 82.5 % and 98.2 % relative activity at 45 °C and pH 4, respectively. Its relative activity was 90.8 % after stored for 30 d at 4 °C. After magnetically separated for 10 cycles, it still kept 70.1 % activity due to the strong covalent bonding. The lipase further catalyzed one-pot esterification and transesterification of high acid value oil (38 mg KOH/g) with 95.7 % biodiesel yield and cycled for 10 times at 85.7 % yield. Kinetic study gave the activation energy of 28.7 kJ/mol. The covalently immobilized lipase could find practical applications.

A Novel Method for γ-Aminobutyric Acid Biosynthesis Using Glutamate Decarboxylase Entrapped in Polyvinyl Alcohol-Sodium Alginate Capsules

γ-aminobutyric acid (GABA) has essential physiological functions in the human body. A novel method using glutamate decarboxylase (GAD) entrapped in polyvinyl alcohol (PVA)-sodium alginate (SA) capsules provides a green biological strategy for GABA synthesis. In this investigation, the stability range of immobilized GAD was effectively broadened, and immobilized GAD could be repeatedly used as a batch and fixed-bed column catalyst. The immobilized enzymes were stable and retained 89% of their activity in a pH range of 4.0-5.6, while there was an approximately 50% decrease in free GAD activity in the pH range of 4.8 ± 0.4. The immobilized GAD affinity to the substrate improved, and this was evidenced by the apparent decrease in Km to 13.3 mmol/L from the 30.9 mmol/L for free GAD. The immobilized GAD retained >90.6% activity after eight cycles and a near-100% enzyme activity retention after 120 h of a continuous fixed-bed column catalyst operation. This study has thus presented an effective PVA-SA-GAD immobilization method that could be used to continuously scale-up GABA biosynthesis.

Improving the Encapsulation Efficiency of Lipase in Molecular Cages and Its Application

Here, lipase encapsulation is constructed by locking enzyme molecules in nanomolecular cages on the surface of SH-PEI@PVAC magnetic microspheres. To improve the encapsulation efficiency in enzyme loading, the thiol group is efficiently modified on the grafted polyethyleneimine (PEI) using 3-mercaptopropionic acid. N₂ adsorption-desorption isotherms reveal the existence of mesoporous molecular cages on the microsphere surface. The robust immobilizing strength of carriers to lipase demonstrates the successful encapsulation of enzymes in nanomolecular cages. The encapsulated lipase shows high enzyme loading (52.9 mg/g) and high activity (51.4 U/mg). Different sizes of molecular cages are established, and the cage size showed important effects on lipase encapsulation. It shows that enzyme loading is low at a small size of molecular cages, which is attributed to that the nanomolecular cage is too small to house lipase. The investigation in lipase conformation suggests that the encapsulated lipase retains its active conformation. Compared with the adsorbed lipase, the encapsulated lipase shows higher thermal stability (4.9 times) and higher resistance to denaturants (5.0 times). Encouragingly, the encapsulated lipase shows high activity and reusability in lipase-catalyzed synthesis of propyl laurate, suggesting the potential application value of encapsulated lipase.

Comparison of covalent and in situ immobilization of Candida antarctica lipase A on a flexible nanoporous material

In this study, Candida antarctica lipase A, which has a unique applicability for the conversion of highly branched and bulky substrates, was subjected to immobilization on the flexible nanoporous MIL-53(Fe) by two approaches: covalent coupling and in situ immobilization method. The pre-synthesized support under ultrasound irradiation was incubated with N,N-dicyclohexylcarbodiimide to mediate the covalent attachment between the carboxylic groups on the support surface and amino groups of enzyme molecules. The in situ immobilization in which the enzyme molecules directly were embedded into the metal-organic framework was performed under mild operating conditions in a facile one-step manner. Both immobilized derivatives of the enzyme were characterized by scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, FT-IR spectra, and energy-dispersive X-ray spectroscopy. In the in situ immobilization method, the enzyme molecules were efficiently encapsulated within the support with a high loading capacity (220 ± 5 mg/g support). On the other hand, the covalent attachment resulted in immobilizing much lower concentrations of the enzyme (20 ± 2.2 mg/g support). Although both immobilized derivatives of lipase showed broader pH and temperature tolerance relative to the soluble enzyme, the biocatalyst, which was prepared through in situ method, was more stable at elevated temperatures than the covalently immobilized lipase. Furthermore, in situ immobilized derivatives of Candida antarctica lipase A could be efficiently reused for at least eight cycles (> 70% of retained activity). In contrast, its covalently immobilized counterpart showed a drastic decrease in activity after five cycles (less than 10% of retained activity at the end of 6 rounds).

Enzyme immobilization on biomass-derived carbon materials as a sustainable approach towards environmental applications

Enzymes with their environment-friendly nature and versatility have become highly important 'green tools' with a wide range of applications. Enzyme immobilization has further increased the utility and efficiency of these enzymes by improving their stability, reusability, and recyclability. Biomass-derived matrices when used for enzyme immobilization offer a sustainable solution to environmental pollution and fuel depletion at low costs. Biochar and other biomass-derived carbon materials obtained are suitable for the immobilization of enzymes through different immobilization strategies. Environmental pollution has become an utmost topic of research interest due to an ever-increasing trend being observed in anthropogenic activities. This has widely contributed to the release of various toxic effluents into the environment in their native or metabolized forms. Therefore, more focus is being directed toward the utilization of immobilized enzymes in the bioremediation of water and soil, biofuel production, and other environmental applications. In this review, up-to-date literature concerning the immobilization and potential uses of enzymes immobilized on biomass-derived carbon materials has been presented.

A tailored bifunctional carbon catalyst for efficient glycosidic bond fracture and selective hemicellulose fractionation

This study proposed a mild chlorination-sulfonation approach to synthesize magnetic carbon acid bearing with catalytic SO₃H and adsorption Cl bifunctional sites on polydopamine coating. The catalysts exerted good textural structure and surface chemical properties (i.e., porosity, high specific surface area of >70 m²/g, high catalytic activity with 0.86-1.1 mmol/g of SO₃H sites and 0.8%-1.9% of Cl sites, and abundant hydrophilic functional groups), rendering a maximum cellobiose adsorption efficiency of ∼40% within 6 h. Moreover, the catalysts had strong fracture characteristics on different α-/β-glycosidic bonds with 85.4%-93.9% of disaccharide conversion, while selectively fractionating hemicellulose from wheat straw with 64.3% of xylose yield and 93.4% of cellulose retention. Due to the stable interaction between parent polydopamine support with Fe core and functional groups, the catalysts efficiently recovered by simple magnetic separation had good reusability with minimal losses in catalytic activity.