Water based-deep eutectic solvent for ultrasound-assisted liquid-liquid microextraction of parabens in edible oil

Green extraction and IC analysis of trace impurities in TATB through deep eutectic solvents

1,3,5-trinamino-2,4,6-trinitrobenzene (TATB) as an important insensitive high explosive has excellent safety performance due to strong hydrogen bonds. Ionic impurities including sulfate ions (SO42-), nitrate ions (NO3-) and chloride ions (Cl-) formed during the preparation of TATB have negative effects on TATB-based explosives. However, strong hydrogen bonds result in extremely low solubility of TATB in traditional solvents, which poses a huge obstacle to extract and detect the impurities in TATB for quality control. In this study, a green extraction method based deep eutectic solvent (CS-1) was firstly developed for the extraction of trace impurities in TATB. After the dissolution of TATB in CS-1 solvent, water (H2O) was used as a green hydrogen bond donor to differentiate the solubility between TATB and its ionic impurities. Through the above strategy, TATB was efficiently removed and the impurities were selectively extracted in CS-1 solvent. Meanwhile, Ca(OH)2 as a precipitant was investigated to eliminate the background interference of F- ions in CS-1 solvent through forming the precipitate of CaF2. Further, the extraction of deep eutectic solvent was combined with ion chromatography (IC) to develop an analytical method for trace impurities. This method displays excellent separation, high sensitivity and good repeatability toward four ionic impurities (Cl-, NO2-, NO3- and SO42-). Compared to traditional methods (DMSO method and oxygen flask combustion method) with low extraction ability, indirect detection and dangerous pretreatment, this method provides direct, convenient and accurate detection of anionic impurities in TATB, and displays better application for quality control of TATB.

A reversed-phase dispersive liquid-liquid micelle-mediated microextraction method coupled to batch injection analysis for electrochemical determination of carbendazim in edible oil samples

This study describes the design of an eco-friendly and low-cost reversed-phase dispersive liquid-liquid microextraction method based on reversed-phase dispersive liquid-liquid micelle-mediated microextraction (RP-DLLMEM) for the extraction of carbendazim from edible oil samples and is coupled to batch injection analysis (BIA) with electrochemical detection using a boron-doped diamond electrode (BDDE). The highest extraction efficiency of carbendazim was achieved using sodium dodecyl sulfate (SDS). The factors that play an important role in the extraction were optimized using chemometric tools: SDS concentration (17.5 mM), pH of SDS solution (pH 7.0), vortex-assisted extraction time (60 s), and volume of SDS solution (900 μL), using 5.0 mL of edible oil sample. An external analytical curve was constructed from 10.0 to 200.0 μM (R2 = 0.996) and a LOD of 0.47 μM was obtained. The proposed method was successfully applied to the analysis of soybean and canola samples and compared to HPLC-DAD.

The application of deep eutectic solvent-based magnetic nanofluid in analytical sample preparation

The pursuit of green analytical chemistry has led to the exploration of deep eutectic solvents (DESs) as green solvents in sample preparation processes. DESs, formed by hydrogen bond donor and acceptor components, exhibit unique properties such as low toxicity, biodegradability, and designable structures that make them ideal for extraction technologies. However, no comprehensive assessment of the utilization of DES-based magnetic nanofluid for analytical sample pretreatment has been performed. This review summarized the preparation methods of DES-based magnetic nanofluids and their application in various microextraction technologies, including vortex-assisted, ultrasonic-assisted, dispersive, and microfluidic device-based approaches, highlighting their role in enhancing the efficiency and sustainability of analytical methods. The paper underscored the importance of the stability of magnetic nanofluids in sample pretreatment and the advantages of using DESs, such as reduced organic solvent usage and compatibility with green chemistry principles. Key findings from recent research on the application of DES-based magnetic nanofluids in microextraction were presented, demonstrating their high extraction recoveries, low detection limits, and applicability to a wide range of analytes and matrices. The outlook suggests potential directions for future research, including the refinement of DES-based magnetic nanofluids for improved performance in analytical sample preparation. This review provides a valuable reference for researchers and practitioners in the field of analytical chemistry, showcasing the potential of DES-based magnetic nanofluids as a sustainable and efficient tool for sample preparation and microextraction.

Water-based green deep eutectic solvent: Application in liquid-liquid microextraction of trace bisphenol A in edible oils

In this study, tetrabutylammonium chloride (TBAC), tetrabutylammonium bromide (TBAB), and choline chloride (ChCl) were innovatively applied in the liquid-liquid microextraction (LLME) of bisphenol A (BPA) from edible oil by forming water-based deep eutectic solvent (WDES). The presence of water is not only used in the synthesis of WDES, but also modulates the viscosity of DES and improve its diffusion and mass transfer properties. Several crucial parameters affecting the extraction efficiency were examined, including the type and amount of WDES and the extraction time. The results indicated that TBAC-H2O (molar ratio 1: 5) WDES exhibited the best extraction ability, the optimal extractant dosage was 100 μL and the extraction time was 3 min. Under the optimized experimental conditions, the proposed method showed a low detection limit (0.2 ng mL-1), good linearity (R2 = 0.997), precisions (RSDs ≤5.1 %) and was successfully employed to detect BPA in edible oil with excellent recoveries (90.6-102.6 %). The formation of the WDES was confirmed by 1H NMR, differential scanning calorimetry (DSC). The extraction mechanism was explored through theoretical calculations and Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR-FTIR) analysis. The results revealed that the separation of BPA by WDESs was primarily dominated by hydrogen bonds, and the hydrogen bond interaction between TBAC-BPA was stronger than that of TBAB-BPA and ChCl-BPA. This work provides a valuable reference for the determination of trace BPA in edible oils or similar samples in food safety monitoring and screening.

Chitosan-based emulsive liquid-liquid microextraction for the determination of strobilurin fungicides in water samples

Strobilurin fungicides are widely used pesticides globally; however, their residues pose a risk to environmental safety and human health. This study aimed to develop a rapid and green method for detecting strobilurin fungicide residues. Chitosan and magnetic deep eutectic solvent-based emulsive liquid-liquid microextraction method combined with high-performance liquid chromatography was developed to determine strobilurin fungicides in water samples. A high-concentration oil-in-water emulsion containing chitosan solution and extractant was formulated, followed by the addition of samples to form a low-concentration oil-in-water emulsion to complete the rapid pretreatment, therefore solving the limitation of emulsive liquid-liquid microextraction in the inapplicability of extractants. Traditional microextraction required toxic solvents and complex equipment to facilitate the dispersion of extractants, whereas this study used only chitosan solution to aid in emulsifying extractants. The new green magnetic deep eutectic solvent synthesized by tetraoctylammonium bromide, ferric chloride, and oleic acid was used instead of toxic extractants. An external magnetic field assisted the extractant phase collection, which shortened the separation time. Under optimal conditions, the recovery of this method was 83.3 %-107.4 %, the limit of detection was 0.0010-0.0021 mg L-1, and the coefficient of determination was >0.994. This rapid, green, simple, and efficient chitosan-based microextraction method could detect strobilurin fungicide residues in water samples because of its enhanced compatibility with hydrophobicity extractants.

Enzymatic and ultrasound assisted β-cyclodextrin extraction of active ingredients from Forsythia suspensa and their antioxidant and anti-inflammatory activities

With the proposal of the 2030 Agenda for Sustainable Development, the Chinese medicine extraction technology has been innovatively improved to prioritize low energy consumption, sustainability, and minimized organic solvent utilization. Forsythia suspensa (FS) possesses favorable pharmacological properties and is extensively utilized in traditional Chinese medicine. However, due to the limitations of the composition and extraction methods, its potential has not been fully developed. Thus, a combination of ultrasound-assisted extraction (UAE), enzyme-assisted extraction (EAE), and β-cyclodextrin extraction (β-CDE) was employed to isolate and purify rutin, phillyrin, and forsythoside A from FS. The results demonstrated that the efficiency of extracting enzymatic and ultrasound assisted β-cyclodextrin extraction (EUA-β-CDE) was highly influenced by the temperature and duration of hydrolysis, as well as the duration of the extraction process. According to the results of the single-factor experiment, Box-Behnken design (BBD) in Response surface method (RSM) was used to optimize the experimental parameters to achieve the maximum comprehensive evaluation value (CEV) value. The EUA-β-CDE compared with other extraction methods, has good extraction effect and low energy consumption by high performance liquid chromatography (HPLC), scanning electron microscopy (SEM), calculation of power consumption and CO2 emission The EUA-β-CDE compared with other extraction methods, has good extraction effect and low energy consumption by HPLC, SEM, calculation of power consumption and CO2 emission. Then, the structural characteristics of EUA-β-CDE of FS extract had significant interaction with β-CD by Fourier infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). In addition, EUA-β-CDE extract has good antioxidant and anti-inflammatory activities. The establishment of EUA-β-CDE of FS provides a new idea for the development and application of other sustainable extraction methods of traditional Chinese medicine.

Novel ferrofluid based on water-based deep eutectic solvents: application in dispersive liquid-liquid microextraction of naphthalene-derived plant growth regulators in edible oil

A new ferrofluid extractant (Fe3O4 @SiO2-WDES) was ingeniously prepared by coating magnetic Fe3O4 @SiO2 microspheres with water-based deep eutectic solvent (WDES) and used for dispersive liquid-liquid microextraction (DLLME) and HPLC determination of naphthalene-derived plant growth regulators (PGRs, i.e., 1-naphthylacetic acid, 2-naphthylacetic acid, 1-naphthoxy acetic acid, 2-naphthyloxyacetic acid and 1-naphthylacetamide) in edible oil. Herein, mass transfer of the analytes in DLLME was significantly enhanced via increasing the contact surface by employing the microspheres as the supporter and dispersant of WDES, and phase separation can be efficiently achieved using an external magnet rather than centrifugation in traditional DLLME. Response surface methodology (RSM) based on Box-Behnken design (BBD) was employed for the optimization of core experimental conditions, and Analytical Eco-Scale and Analytical GREEnness Metric Approaches were adopted to evaluate the degree of greenness of the procedure. Under the optimal conditions, satisfactory performances of linearity ranged from 5 to 100 μg/L (R2 ≥ 0.9982), limit of detection (0.58-0.91 μg/L), limit of quantitation (1.9-3.0 μg/L), precision (RSDs ≤ 5.5%), recovery (81.3%-108.1%) and negligible matrix effect were achieved, which introduced a promising alternative route for the determination of naphthalene-derived plant growth regulators in edible oil.

An effervescence-assisted microextraction for parabens in foodstuffs based on deep eutectic solvent composed of methyltrioctyl ammonium chloride and decanoic acid

An efficient and ecofriendly effervescence-assisted emulsification microextraction approach based on hydrophobic deep eutectic solvent (EA-EME-DES) was developed for the sensitive chromatographic determination of parabens (i.e., methyl-, ethyl-, propyl- and butylparaben) in foodstuffs. The DES extractant consisted of methyltrioctyl ammonium chloride (MTAC) and decanoic acid (DecA) (1:3, mol/mol), and had high hydrophobicity, solubility and stability. During the microextraction procedure, sodium carbonate was introduced to facilitate the dissolution of parabens in aqueous solution, DES dispersion and phase separation by enhancing solution pH and generating CO2 bubbles. The developed method exhibited satisfactory linearity (R2 ≥ 0.9986), detection limits (0.01-0.03 μg/g), quantitation limits (0.04-0.09 μg/g), recoveries (87.8% to 111%, with RSDs of 0.8% to 5%) and negligible matrix effects, hence it had remarkable effectiveness and applicability in determining parabens in complex foodstuffs.

Preparation and application of an imidazolium-based poly (ionic liquid) functionalized silica sorbent for solid-phase extraction of parabens from food samples

In this work, an imidazolium-based poly (ionic liquid) (poly(1-octyl-3-vinyl- imidazolium naphthalene sulfonate)) functionalized silica (poly(C8VIm+NapSO3-) @SiO2) was successfully prepared for the determination of parabens in food samples. The prepared poly(C8VIm+NapSO3-)@SiO2 was characterized by Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectrogram (XPS) and Scanning electron microscopy (SEM). The simulation calculation results indicated that the suitable binding energies were between the polymeric ionic liquids and parabens, and the main interactions for extraction were hydrogen bonding, electrostatic and π-π stacking interactions. In addition, compared with commercial extraction materials, the prepared poly(C8VIm+NapSO3-)@SiO2 sorbent showed comparable or even better extraction performance towards parabens. The effective parameters were optimized by a combination of the univariate method and Box-Behnken design (BBD). Under the optimum conditions, coupled with high performance liquid chromatography (HPLC), wide linear ranges (1.0-800 μg L-1), good linearity (R2 ≥ 0.9997) and low limits of detection (0.1 μg L-1) were obtained. In addition, the intra-day and inter-day relative standard deviations (RSDs) were all lower than 6.3%. Moreover, the proposed method was successfully used for the determination of parabens in food samples and satisfactory recoveries in the range of 76.9-97.4% were obtained. The results indicated that the proposed method had good sensitivity, accuracy and precision for the detection of parabens in food samples.

Identification of pressed and extracted vegetable oils by headspace GC-MS

Edible vegetable oils are produced either by mechanical pressing or extraction. Although pressing retains the inherent flavor and nutritional value of the oil, the oil yield is low and the process expensive. Extraction methods have high oil yields, low processing costs, and economic benefits; however, No. 6 solvent, which may pose potential risks to human health, is commonly used in the extraction and cleaning process. Differentiating extracted oil containing these solvents from pressed oil, for quality control, based on visual appearance is difficult. Hence, in this study, an identification method using the characteristic components of solvent No. 6 under optimized headspace Gas chromatography-mass spectrometry (GC-MS) conditions was established. It also provided a reference for quality control of industrial production by estimating the amount of solvent present in the oil. Results showed that, in addition to five main components (2-methylpentane, 3-methylpentane, and n-hexane, Methylcyclopentane, Cyclohexane), accounting for 97% of the solvent, No. 6 solvent also contains 16 types of organic substances, such as olefins, aromatic hydrocarbons, and polycyclic aromatic hydrocarbons. Under optimized headspace GC-MS conditions (headspace sampler equilibrium temperature = 150 °C), the No. 6 solvent exhibits high linearity over a concentration range of 0.05-1 mg/kg with a correlation coefficient of 0.999 and a detection limit of 0.01 mg/kg. Pressed and extracted oils can be determined as follows: If three or fewer main components of the No. 6 solvent are detected, and the total content of No. 6 solvent is less than 0.5 mg/kg, it is a pressed oil; if four or more main components of No. 6 solvent are detected, or the total content of No. 6 solvent is ≥0.5 mg/kg, it is confirmed as an extracted oil.

Microextraction of Tigecycline Using Deep Eutectic Solvents and Its Determination in Milk by LC-MS/MS Method

The occurrence of tigecycline (TGC), a new first glycylcycline antibiotic residues in food products harmfully influences potential human consumers health. Therefore, analysts are forced to develop new microextraction methods connected with modern extractants for effective isolation of this compound. For this purpose, deep eutectic solvents (DES) as the extraction media were used. Liquid-liquid microextraction (LLME) of tigecycline from milk samples with application of the hydrophobic deep eutectic solvents: decanoic acid:thymol (1:1), thymol:camphor (2:1), dodecanoic acid:menthol (2:1), and dodecanoic acid:dodecanol (1:1) was developed. The studied samples were subjected to a deproteinization process using trichloroacetic acid solution and acetonitrile. The optimal microextraction parameters, molar ratio of DES components, amount of extraction solvents, pH of milk sample, shaking, and centrifugation time, were chosen. Tigecycline in the obtained microextracts of deep eutectic solvents was analyzed using a liquid chromatographic technique connected with a tandem mass spectrometry (LC-MS/MS) system. The limits of detection and quantification values for TGC determination followed by DES-LLME-LC-MS/MS method were in the 1.8 × 10^-11 mol L^-1 (0.01 μg kg^-1) to 4.0 × 10^-9 mol L^-1 (2.28 μg kg^-1) and 5.5 × 10^-11 mol L^-1 (0.03 μg kg^-1) to 1.2 × 10^-8 mol L^-1 (6.84 μg kg^-1) ranges, respectively. The RSD values of precision were in the range 1.4-7.8% (intraday) and 5.4-11.7% (interday). The developed procedures were used for the determination of tigecycline in different bovine milk samples.

Development and optimization of natural deep eutectic solvent-based dispersive liquid-liquid microextraction coupled with UPLC-UV for simultaneous determination of parabens in personal care products: evaluation of the eco-friendliness level of the developed method

Dispersive liquid-liquid microextraction (DLLME) combined with ultra-high performance liquid chromatography-diode array detector (UHPLC-DAD) method has been developed and validated for the determination of parabens in personal care products. In this study, a natural deep eutectic solvent (NADES) composed of menthol and formic acid at a molar ratio of 1 : 2 was prepared and used as an extraction solvent. The influencing variables on the extraction efficiency such as extraction solvent type and volume, composition of NADES, salt addition, vortex and centrifugation time were investigated. The proposed method exhibited good linearity with determination coefficients of ≥0.9992. The relative recoveries for the studied analytes ranged from 82.19 to 102.45%. Limits of detection and limits of quantification were in the range of 0.17-0.33 ng mL^-1 and 0.51-0.99 ng mL^-1, respectively. To evaluate the applicability of the developed method, it was successfully applied to determine four parabens in personal care products. Additionally, the eco-friendliness level of the presented method was evaluated using Eco-Scale Assessment, Green Analytical Procedure Index and Analytical GREEnness metric. The developed method is simple, environmentally friendly and cost effective and it could be employed for determination of parabens in personal care products without harming the environment.

Deep Eutectic Solvent Based Reversed-Phase Dispersive Liquid-Liquid Microextraction and High-Performance Liquid Chromatography for the Determination of Free Tryptophan in Cold-Pressed Oils

A fast and straightforward reversed-phase dispersive liquid-liquid microextraction (RP-DLLME) using a deep eutectic solvent (DES) procedure to determine free tryptophan in vegetable oils was developed. The influence of eight variables affecting the RP-DLLME efficiency has been studied by a multivariate approach. A Plackett-Burman design for screening the most influential variables followed by a central composite response surface methodology led to an optimum RP-DLLME setup for a 1 g oil sample: 9 mL hexane as the diluting solvent, vortex extraction with 0.45 mL of DES (choline chloride-urea) at 40 °C, without addition of salt, and centrifugation at 6000 rpm for 4.0 min. The reconstituted extract was directly injected into a high-performance liquid chromatography (HPLC) system working in the diode array mode. At the studied concentration levels, the obtained method detection limits (MDL) was 11 mg/kg, linearity in matrix-matched standards was R² ≥ 0.997, relative standard deviations (RSD) was 7.8%, and average recovery was 93%. The combined use of the recently developed DES -based RP-DLLME and HPLC provides an innovative, efficient, cost-effective, and more sustainable method for the extraction and quantification of free tryptophan in oily food matrices. The method was employed to analyze cold-pressed oils from nine vegetables (Brazil nut, almond, cashew, hazelnut, peanut, pumpkin, sesame, sunflower, and walnut) for the first time. The results showed that free tryptophan was present in the range of 11-38 mg/100 g. This article is important for its contributions to the field of food analysis, and for its development of a new and efficient method for the determination of free tryptophan in complex matrices, which has the potential to be applied to other analytes and sample types.

Deep eutectic solvent-based dispersive liquid-liquid microextraction followed by smartphone digital image colorimetry for the determination of carbofuran in water samples

A detection method of carbofuran (CBF) in water samples was reported using deep eutectic solvent (DES)-based dispersive liquid-liquid microextraction (DLLME) combined with digital image colorimetry (DIC), which was environmentally friendly, solvent-saving, rapid, and convenient. Under alkaline conditions, the green and multifunctional extractant DESs dissociated into linalool and heptanoic acid, and CBF was hydrolyzed to 2,3-dihydro-2,2-dimethyl-7-benzofuranol and further coupled with fast blue BB salt to form an azo derivative. Heptanoic acid led to the dispersion of linalool to extract the orange-red azo derivative; DIC was used for quantitative analysis using a smartphone with its associated ease of data-acquisition. This experiment optimized the types, molar ratios, and volumes of DESs and the amounts of sodium carbonate and sodium chloride. Under optimal conditions, the limits of detection (LOD) and quantitation (LOQ) were 0.024-0.032 mg L^-1 and 0.081-0.108 mg L^-1, respectively. The extraction recoveries in real samples (tap, pond, and river water) were 92.4-101.0% with a relative standard deviation below 4.6%. This method has successfully analyzed CBF in different water samples and shows prospects for the monitoring and control of CBF residues in other environmental samples.

Multi-magnetic center ionic liquids for dispersive liquid-liquid microextraction coupled with in-situ decomposition based back-extraction for the enrichment of parabens in beverage samples

In this paper, several new multi-magnetic center magnetic ionic liquids (MMILs) were prepared with paramagnetic component simultaneously contained in both the cation and anion and used as extractants to establish a dispersive liquid-liquid microextraction (DLLME) approach followed by in-situ MMIL decomposition based back-extraction for the enrichment and determination of four parabens in beverages. The appropriate MMIL was selected by investigating the extraction performances of the obtained MMILs combined with high performance liquid chromatography-ultraviolet detection (HPLC-UV), and some other experimental factors were explored. Under the optimized DLLME conditions, the four parabens exhibited coefficients of determination (R²) above 0.9987 in the linear range of 0.1-500 ng·mL^-1 for ethylparaben, propylparaben and butylparaben and 0.2-500 ng·mL^-1 for methylparaben. The limits of detection (LODs) and limits of quantification (LOQs) were respectively within 0.03-0.06 ng·mL^-1 and 0.1-0.2 ng·mL^-1, and the relative standard deviations (RSDs) for intra-day and inter-day precision were below 10.8%. Moreover, the application of the developed MMIL-based DLLME method in beverage samples exhibited recoveries within 81.3%-112.1% with RSDs of 0.3%-13.1% at three different spiked levels.

Deep Eutectic Solvent-Based Ultrasound-Assisted Strategy for Simultaneous Extraction of Five Macamides from Lepidium meyenii Walp and In Vitro Bioactivities

This study aimed to develop an integrated approach of deep eutectic solvent-based ultrasound-assisted extraction (DES-UAE) to simultaneously extract five major bioactive macamides from the roots of Lepidium meyenii Walp. Ten different DESs containing choline chloride and selected hydrogen-bond donors were prepared and evaluated based on the extracted macamide content determination using high-performance liquid chromatography (HPLC). Choline chloride/1,6-hexanediol in a 1:2 molar ratio with 20% water exhibited the most promising extraction efficiencies under the optimized parameters verified using single-factor optimization as well as Box-Behnken design. Using the optimized DES-UAE method, the extraction efficiencies of the five macamides were up to 40.3% higher compared to those using the most favorable organic solvent petroleum ether and were also superior to those of the other extraction methods, such as heating and combination of heating and stirring. Furthermore, using the macroporous resin HPD-100, the recoveries of the five target macamides from the DES extraction reached 85.62-92.25%. The 20 μg/mL group of the five macamide extracts showed superior neuroprotective activity against PC12 cell injury than that of the positive drug nimodipine. The macamide extracts also showed higher NO inhibition in LPS-stimulated RAW264.7 cells. Thus, the developed approach was a green and potential alternative that can be used to extract bioactive macamide constituents from L. meyenii in the pharmaceutical and food industries.

Hexafluoroisopropanol-based deep eutectic solvents for high-performance DNA extraction†

In this study, hexafluoroisopropanol (HFIP)-based deep eutectic solvents (DESs) were developed and used for DNA extraction from human whole blood samples for the first time. HFIP-based DESs were prepared using HFIP and choline chloride (ChCl)/tetrabutylammonium chloride/cetyltrimethylammonium bromide as the hydrogen bond donor and acceptor, respectively. The two-phase system formation was promoted with different inorganic salts as the phase-forming component. According to the strong phase separation capability and high DNA extraction efficiency, DESs consisting of HFIP/ChCl-(NH₄)₂SO₄, HFIP/ChCl-Na₂SO₄ and HFIP/ChCl-MgSO₄ were then selected for application in DNA extraction. The factors that could have impacted the DNA extraction process, including molar ratio of DES, DES addition, salt species and addition, and sample pH, were systematically investigated via single-factor experimental analysis. Furthermore, we selectively examined bovine serum albumin and RNA to assess the specificity of the HFIP-based DESs for DNA extraction. Conclusively, 93.9%, 96.7% and 99.8% DNA could be extracted using the HFIP/ChCl-(NH₄)₂SO₄, HFIP/ChCl-Na₂SO₄, and HFIP/ChCl-MgSO₄ systems, respectively. Moreover, the developed systems were successfully used to extract DNA from human whole blood with satisfactory results. The DNA secondary structure was stable after DES extraction with the electrostatic interaction between DES and DNA as the main force driving DNA adsorption by DES.

In a novel approach, hexafluoroisopropanol-based deep eutectic solvents were synthesized and utilized as an efficient alternative for extracting DNA from human whole blood.

Extraction of parabens from personal care products using a pH-responsive hydrophobic deep eutectic solvent: experimental design and COSMO-RS evaluations

A pH-responsive hydrophobic deep eutectic solvent is used for the extraction of parabens from different personal care products.