Screen-printed electrochemical immunosensor based on a novel nanobody for analyzing aflatoxin M1 in milk

Gold nanoparticles-doped MXene heterostructure for ultrasensitive electrochemical detection of fumonisin B1 and ampicillin

Early transition metal carbides (MXene) hybridized by precious metals open a door for innovative electrochemical biosensing device design. Herein, we present a facile one-pot synthesis of gold nanoparticles (AuNPs)-doped two-dimensional (2D) titanium carbide MXene nanoflakes (Ti3C2Tx/Au). Ti3C2Tx MXene exhibits high electrical conductivity and yields synergistic signal amplification in conjunction with AuNPs leading to excellent electrochemical performance. Thus Ti3C2Tx/Au hybrid nanostructure can be used as an electrode platform for the electrochemical analysis of various targets. We used screen-printed electrodes modified with the Ti3C2Tx/Au electrode and functionalized with different biorecognition elements to detect and quantify an antibiotic, ampicillin (AMP), and a mycotoxin, fumonisin B1 (FB1). The ultralow limits of detection of 2.284 pM and 1.617 pg.mL-1, which we achieved respectively for AMP and FB1 are far lower than their corresponding maximum residue limits of 2.8 nM in milk and 2 to 4 mg kg-1 in corn products for human consumption set by the United States Food and Drug Administration. Additionally, the linear range of detection and quantification of AMP and FB1 were, respectively, 10 pM to 500 nM and 10 pg mL-1 to 1 µg mL-1. The unique structure and excellent electrochemical performance of Ti3C2Tx/Au nanocomposite suggest that it is highly suitable for anchoring biorecognition entities such as antibodies and oligonucleotides for monitoring various deleterious contaminants in agri-food products.

Nafion-Immobilized Functionalized MWCNT-based Electrochemical Immunosensor for Aflatoxin B1 Detection

The ubiquitous aflatoxin B1 (AFB1) contamination in foods and other complex matrices has brought great challenges for onsite monitoring. In this study, an ultrasensitive Nafion-immobilized functionalized multiwalled carbon nanotube (MWCNT)-based electrochemical (EC) immunosensor was developed for trace AFB1 detection. The introduced Nafion film could steadily stabilize functionalized MWCNTs with uniform distribution and tiling on the surface of a Au electrode. Functionalized MWCNTs with a large specific surface area, numerous active sites to couple with abundant anti-AFB1 monoclonal antibodies (mAbs), and high conductivity served as the signal amplifier for remarkably enhancing the sensing performance of the immunosensor. In the presence of AFB1, it was specifically captured by mAbs to reduce the amplified current signals, which were recorded by differential pulse voltammetry for the accurate quantitation of AFB1. Because of the synergistic effects of Nafion on the stabilization of functionalized MWCNTs as signal enhancers, the developed EC immunosensor exhibited an extremely high selectivity, excellent sensitivity with a limit of detection as low as 0.021 ng/mL, and a wide dynamic range of 0.05-100 ng/mL, besides fascinating merits of easy construction, low cost, good stability in 7 days, and good reusability. The anti-interference ability of the immunosensor was verified against three other mycotoxins, and the practicability and accuracy were confirmed by measuring AFB1 in fortified malt, lotus seed, and hirudo samples with a satisfactory recovery of 92.08-104.62%. This novel immunosensing platform could be extended to detect more mycotoxins in complex matrices to ensure food safety.

Magnetic nanoparticle-based immunosensors and aptasensors for mycotoxin detection in foodstuffs: An update

Mycotoxin contamination of food crops is a global challenge due to their unpredictable occurrence and severe adverse health effects on humans. Therefore, it is of great importance to develop effective tools to prevent the accumulation of mycotoxins through the food chain. The use of magnetic nanoparticle (MNP)-assisted biosensors for detecting mycotoxin in complex foodstuffs has garnered great interest due to the significantly enhanced sensitivity and accuracy. Within such a context, this review includes the fundamentals and recent advances (2020-2023) in the area of mycotoxin monitoring in food matrices using MNP-based aptasensors and immunosensors. In this review, we start by providing a comprehensive introduction to the design of immunosensors (natural antibody or nanobody, random or site-oriented immobilization) and aptasensors (techniques for aptamer selection, characterization, and truncation). Meanwhile, special attention is paid to the multifunctionalities of MNPs (recoverable adsorbent, versatile carrier, and signal indicator) in preparing mycotoxin-specific biosensors. Further, the contribution of MNPs to the multiplexing determination of various mycotoxins is summarized. Finally, challenges and future perspectives for the practical applications of MNP-assisted biosensors are also discussed. The progress and updates of MNP-based biosensors shown in this review are expected to offer readers valuable insights about the design of MNP-based tools for the effective detection of mycotoxins in practical applications.

Enhancing Oriented Immobilization Efficiency: A One-for-Two Organism-Bispecific Nanobody Scaffold for Highly Sensitive Detection of Foodborne Pathogens

Nanobodies have gained widespread application in immunoassays. However, their small size presents a significant challenge in achieving effective immobilization and optimal sensitivity. Here, we present a novel "one-for-two"-oriented immobilization platform based on an organism-bispecific nanobody (O-BsNb) scaffold, enabling highly sensitive detection of two bacterial pathogens. Through genetic engineering, a bispecific nanobody (BsNb) was engineered, targeting Salmonella spp. and Vibrio parahaemolyticus. The O-BsNb scaffold allowed one nanobody to bind specifically to inactivated bacteria, forming an organism-oriented immobilization platform, while the other served as the capture antibody. Consequently, the O-BsNb bioscaffold-based ELISA (O-ELISA) for individual detection of S. enteritidis and V. parahaemolyticus was established. When compared to the sandwich ELISA utilizing passive immobilization of monovalent nanobodies, the O-ELISA exhibited a remarkable 13.4- and 13.7-fold improvement in LOD for S. enteritidis and V. parahaemolyticus, respectively, highlighting the enhanced immobilization efficacy of the O-ELISA. Furthermore, the feasibility and reproducibility of the assay in practical samples were meticulously evaluated, revealing exemplary performance in terms of recovery precision and assay stability. These findings demonstrate the significant potential of the O-ELISA platform for the sensitive detection of macromolecules, opening new avenues for efficient pathogen identification in foodborne safety and clinical diagnostics.

Recent Advances in Electrochemical Biosensors for Food Control

The rapid and sensitive detection of food contaminants is becoming increasingly important for timely prevention and treatment of foodborne disease. In this review, we discuss recent developments of electrochemical biosensors as facile, rapid, sensitive, and user-friendly analytical devices and their applications in food safety analysis, owing to the analytical characteristics of electrochemical detection and to advances in the design and production of bioreceptors (antibodies, DNA, aptamers, peptides, molecular imprinted polymers, enzymes, bacteriophages, etc.). They can offer a low limit of detection required for food contaminants such as allergens, pesticides, antibiotic traces, toxins, bacteria, etc. We provide an overview of a broad range of electrochemical biosensing designs and consider future opportunities for this technology in food control.

Mach-Zehnder Interferometric Immunosensor for Detection of Aflatoxin M1 in Milk, Chocolate Milk, and Yogurt

Aflatoxin M1 (AFM1) is detected in the milk of animals after ingestion of aflatoxin B1-contaminated food; since 2002, it has been categorized as a group I carcinogen. In this work, a silicon-based optoelectronic immunosensor for the detection of AFM1 in milk, chocolate milk, and yogurt has been developed. The immunosensor consists of ten Mach-Zehnder silicon nitride waveguide interferometers (MZIs) integrated on the same chip with the respective light sources, and an external spectrophotometer for transmission spectra collection. The sensing arm windows of MZIs are bio-functionalized after chip activation with aminosilane by spotting an AFM1 conjugate with bovine serum albumin. For AFM1 detection, a three-step competitive immunoassay is employed, including the primary reaction with a rabbit polyclonal anti-AFM1 antibody, followed by biotinylated donkey polyclonal anti-rabbit IgG antibody and streptavidin. The assay duration was 15 min with limits of detection of 0.005 ng/mL in both full-fat and chocolate milk, and 0.01 ng/mL in yogurt, which are lower than the maximum allowable concentration of 0.05 ng/mL set by the European Union. The assay is accurate (% recovery values 86.7-115) and repeatable (inter- and intra-assay variation coefficients <8%). The excellent analytical performance of the proposed immunosensor paves the way for accurate on-site AFM1 determination in milk.

Three recombinant peroxidases as a degradation agent of aflatoxin M1 applied in milk and beer

The aim of this work was to estimate the effects of three recombinant peroxidases (rPODs) on the degradation of aflatoxin M₁ (AFM₁) in a model solution and were applied in milk and beer to study the AFM₁ degradation. Besides, the contents of AFM₁ in model solution, milk and beer were evaluated, and the kinetic parameters of rPODs were determined (Michaelis-Menten constant - K_m and maximal velocity - V_max). The optimized reaction conditions (The degradation was over 60 %) for these three rPODs in the model solution were, respectively as follows: pH were 9, 9, and 10; hydrogen peroxide concentrations were 60, 50, and 60 mmol/L; at an ionic strength of 75 mmol/L and reaction temperature of 30 °C with 1 mmol/L K⁺ or 1 mmol/L Na⁺. These three rPODs (1 U /mL) presented the maximum activity for degradation of AFM₁ of 22.4 %, 25.6 %, and 24.3 % in milk, while 14.5 %, 16.9 %, and 18.2 % in beer, respectively. Meanwhile, the survival rate of Hep-G2 cells raised about 1.4 times after treated with peroxidase-generated AFM₁ degradation products. Therefore, POD may be a promising alternative to reduce the pollution of AFM₁ in model solution, milk, beer, and minimize their impact on the environment in humans.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection

An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)₃) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)₃ composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL^-1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL^-1 and 61 pg mL^-1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na⁺, K⁺, Ca²⁺, and NO₂^-), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 10⁵ times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.

UHT Milk Characterization by Electrical Impedance Spectroscopy

Ultra-High Temperature (UHT) pasteurized milk is the most diffused variety of milk in Europe. In this paper, a method is presented, employing Electrical Impedance Spectroscopy to characterize the different commercial milks commonly available in grocery stores and supermarkets. The curves of the measured admittance allow for the classification of the type of milk (whole, semi-skimmed, fat-free) and to distinguish lactose-free milk. An electrical circuit model has been derived and different values of circuit parameters add interesting information on the classification of the samples. Furthermore, the characterization allows for the identification of the degradation of the milk before it is visible to the eye, thus highlighting the difference between storage in the fridge and at room temperature, and identifying expired milk.

Selection and Characterization of DNA Aptamers for Constructing Aptamer-AuNPs Colorimetric Method for Detection of AFM1

Aflatoxin M1 (AFM1), one of the most toxic mycotoxins, is a feed and food contaminant of global concern. To isolate the ssDNA aptamer of AFM1, synthesized magnetic graphene oxide nanomaterials, 12 rounds of subtractive systematic evolution of ligands by exponential enrichment (SELEX) selection were carried out. As a result, 24 candidate aptamers were selected, and their sequence similarity exceeded 97%. Their binding affinity and specificity were further examined by fluorescence and biofilm interferometry (BLI) methods. One aptamer (Apt-5) against AFM1 with a high affinity and specificity was isolated and demonstrated to be the optimal aptamer, whose dissociation constant reached the nanomolar level, Kd = 8.12 ± 1.51 nM. Additionally, molecular docking studies were used to predict the possible binding sites and mechanisms of the two. Based on Apt-5, an unlabeled aptamer-AuNPs colorimetric method was established to detect AFM1 in milk with a linear range of 0.078–10 ng/mL, and the actual detection limit was 0.078 ng/mL. These results demonstrated that this detection technique could be useful for the quantitative determination of AFM1 in milk and dairy products.