The glucosinolate profiles of Brassicaceae vegetables responded differently to quick-freezing and drying methods

Recent advances in the contribution of glucosinolates degradation products to cruciferous foods odor: factors that influence degradation pathways and odor attributes

As one of the most important vegetables and oils consumed globally, cruciferous foods are appreciated for their high nutritional value. However, there is no comprehensive knowledge to sufficiently unravel the "flavor mystery" of cruciferous foods. The present review provides a comprehensive literature on the recent advances regarding the contribution of glucosinolates (GSL) degradation products to cruciferous foods odor, which focuses on key GSL degradation products contributing to distinct odor of cruciferous foods (Brassica oleracea, Brassica rapa, Brassica napus, Brassica juncea, Raphanus sativus), and key factors affecting GSL degradation pathways (i.e., enzyme-induced degradation, thermal-induced degradation, chemical-induced degradation, microwave-induced degradation) during different processing and cooking. A total of 93 volatile GSL degradation products (i.e., 36 nitriles, 33 isothiocyanates, 3 thiocyanates, 5 epithionitriles, and 16 sulfides) and 29 GSL (i.e., 20 aliphatic, 5 aromatic, and 4 indolic) were found in generalized cruciferous foods. Remarkably, cruciferous foods have a distinctive pungent, spicy, pickled, sulfur, and vegetable odor. In general, isothiocyanates are mostly present in enzyme-induced degradation of GSL and are therefore often enriched in fresh-cut or low-temperature, short-time cooked cruciferous foods. In contrast, nitriles are mainly derived from thermal-induced degradation of GSL, and are thus often enriched in high-temperature, long-time cooked cruciferous foods.

Comparing Fungal Sensitivity to Isothiocyanate Products on Different Botrytis spp

Glucosinolates, the main secondary metabolites accumulated in cruciferous flora, have a major impact on fortifying plant immunity against diverse pathogens. Although Botrytis cinerea exhibits varying sensitivity to these compounds, current research has yet to fully understand the intricate mechanisms governing its response to glucosinolates. Different species of the genus Botrytis were exposed to glucosinolate-derived isothiocyanates, revealing that B. fabae, B. deweyae, and B. convolute, species with the mfsG transporter gene (Bcin06g00026) not detected with PCR, were more sensitive to isothiocyanates than Botrytis species containing that gene, such as B. cinerea, B. pseudocinerea, and B. byssoidea. This finding was further corroborated by the inability of species with the mfsG gene not detected with PCR to infect plants with a high concentration of glucosinolate-derived isothiocyanates. These results challenge established correlations, revealing varying aggressiveness on different plant substrates. An expression analysis highlighted the gene's induction in the presence of isothiocyanate, and a bioinformatic investigation identified homologous genes in other Botrytis species. Our study underscored the importance of advanced biotechnology to help understand these proteins and thus offer innovative solutions for agriculture.

Low-Temperature Vacuum Drying on Broccoli: Enhanced Anti-Inflammatory and Anti-Proliferative Properties Regarding Other Drying Methods

Low-temperature vacuum drying (LTVD) has shown great potential for drying vegetables. It could avoid excessive degradations of active compounds with potential therapeutic agents. In this study, the effect on several relevant bioactive compounds, anti-inflammatory activity, and anti-proliferative activity of broccoli (Brassica oleracea var. italica) were evaluated. Effects of other drying methods, including vacuum drying (VD), convective drying (CD), infrared drying (IRD), and freeze drying (FD), were also comparatively evaluated. The results of all dried samples showed high polyunsaturated fatty acid contents (of up to 71.3%) and essential amino acid contents (of up to 8.63%). The LTVD method stands out above the other drying methods, since it obtained the highest content of total phenols, chlorogenic acid, and ferulic acid. Both the LTVD and CD samples demonstrated high anti-inflammatory and anti-proliferative activities. These CD and LTVD samples were also the most active against the breast carcinoma MDA-MB-23 cell line. Due to the good retention of bioactive compounds via LTVD, the obtained dried broccoli here can be used in a near time as an ingredient for the development of novel natural products with anti-inflammatory and anti-proliferative effects.

Physical character, total polyphenols, anthocyanin profile and antioxidant activity of red cabbage as affected by five processing methods

Understanding the influence of processing methods on the phytochemicals of fruits and vegetables is of importance in retaining the health-benefiting properties of those products. The aim of this study was to investigate the effects of five processing methods including freeze drying (FD), hot air drying (HD), water boiling (WB), steaming (ST), and pickling (PI) on the physical character, total polyphenols, anthocyanin profile and antioxidant activity of red cabbage. Different color and texture were observed after different processing methods. Total anthocyanin content was reduced by 73%, 72%, 41%, 16%, and 30% in FD, HD, WB, ST and PI processed red cabbage, respectively. PI samples showed the highest values of total polyphenols and DPPH scavenge activity among all the processed red cabbage. Both FD and HD samples had relatively low values of total polyphenols and DPPH scavenge activity. However, FD sample had the highest FRAP values. UPLC-QqQ-MS/MS analysis showed that fresh red cabbage contained 22 anthocyanins among which cyanidin-3-diglucoside-5-glucoside was the prominent. Compared with drying process, WB, ST and PI decreased the loss of most of the anthocyanin component in red cabbage. Correlation analysis indicated that antioxidant capacity as determined by DPPH of red cabbage was positively and significantly correlated with the total anthocyanins. This study suggested that drying induced significant loss of phytochemicals in red cabbage, and WB, ST, as well as PI were advisable ways for daily consumption of red cabbage considering the bioactive components. Especially, ST was the best way to retain anthocyanins in red cabbage.

Comprehensive Evaluation of the Bioactive Composition and Neuroprotective and Antimicrobial Properties of Vacuum-Dried Broccoli (Brassica oleracea var. italica) Powder and Its Antioxidants

In this study, vacuum drying (VD) was employed as an approach to protect the bioactive components of and produce dried broccoli powders with a high biological activity. To achieve these goals, the effects of temperature (at the five levels of 50, 60, 70, 80 and 90 °C) and constant vacuum pressure (10 kPa) were evaluated. The results show that, with the increasing temperature, the drying time decreased. Based on the statistical tests, the Brunauer-Emmett-Teller (BET) model was found to fit well to sorption isotherms, whereas the Midilli and Kucuk model fit well to the drying kinetics. VD has a significant impact on several proximate composition values. As compared with the fresh sample, VD significantly reduced the total phenol, flavonoid and glucosinolate contents. However, it was shown that VD at higher temperatures (80 and 90 °C) contributed to a better antioxidant potential of broccoli powder. In contrast, 50 °C led to a better antimicrobial and neuroprotective effects, presumably due to the formation of isothiocyanate (ITC). Overall, this study demonstrates that VD is a promising technique for the development of extracts from broccoli powders that could be used as natural preservatives or as a neuroprotective agent.

Variation in glucosinolates and the formation of functional degradation products in two Brassica species during spontaneous fermentation

Vegetables from the Brassica species are excellent sources of glucosinolates (GLSs), the precursors of health-promoting isothiocyanates (ITCs). Fermentation enhances the biotransformation of GLSs into potential bioactive ITCs. To explore the biotransformation of GLSs during Brassica fermentation, the changes in GLSs during the fermentation of two Brassica species (i.e., cauliflower and broccoli); the formation of corresponding breakdown products; and the shifts in physicochemical parameters, bacterial communities, and myrosinase activities involved in GLSs degradation were systematically investigated. Nine aliphatic, three indolic, and two benzenic GLSs were identified in fermented cauliflower (FC) and fermented broccoli (FB). Aliphatic glucoiberin and glucoraphanin were the major forms of GLS in FC and FB, respectively; indolic glucobrassicin was also abundant in both FC and FB. The total GLS content decreased by 85.29% and 65.48% after 3 d of fermentation in FC and FB, respectively. After 2 d of fermentation, a significant increase in bioactive GLS degradation products (P < 0.05), including sulforaphane (SFN), iberin (IBN), 3,3-diindolylmethane (DIM), and ascorbigen (ARG), was observed in FC and FB compared to in fresh cauliflower and broccoli. Moreover, variations in pH value and titratable acidity in FC and FB correlated with Brassica fermentation and were accomplished by lactic acid bacteria, including Weissella, Lactobacillus-related genera, Leuconostoc, Lactococcus, and Streptococcus. These changes may enhance the biotransformation of GSLs to ITCs. Overall, our results indicate fermentation leads to the degradation of GLSs and the accumulation of functional degradation products in FC and FB.

A new source of bacterial myrosinase isolated from endophytic Bacillus sp. NGB-B10, and its relevance in biological control activity

Plant metabolism interacts strongly with the plant microbiome. Glucosinolates, secondary metabolites synthesized by Brassica plants, are hydrolyzed by myrosinase into bioactive compounds of great importance in human health and plant protection. Compared with myrosinase from plant sources, myrosinase enzymes of microbial origin have not been extensively investigated. Therefore, seven endophytic strains corresponding to Bacillus sp. were isolated from Eruca vesicaria ssp. sativa plants that could hydrolyse glucosinolates (sinigrin) in the culture medium and showed myrosinase activity (0.08–19.92 U mL⁻¹). The bglA myrosinase-related gene encoding the 6-phospho-β-glucosidase (GH 1) from Bacillus sp. NGB-B10, the most active myrosinase-producing bacterium, was successfully identified. Response surface methodology (RSM) was applied to statistically optimize culture conditions for myrosinase production from Bacillus sp. strain NGB-B10. The Plackett–Burman design indicated that nitrogen concentration, incubation period, and agitation speed were the significant parameters in myrosinase production. The application of the Box–Behnken design of RSM resulted in a 10.03-fold increase in enzyme activity as compared to the non-optimized culture conditions. The myrosinase was partially purified by 40% fractionation followed by SDS-PAGE analysis which yielded two subunits that had a molecular weight of 38.6 and 35.0 KDa. The purified enzyme was stable under a broad range of pH (5.5–10) and temperatures (10–65 °C). The hydrolysis products released by bacterial myrosinase from some glucosinolate extracts had higher and/or equivalent in vitro antagonistic activity against several phytopathogenic fungi compared to the nystatin (a broad-spectrum antifungal agent). This study provides original information about a new source of bacterial myrosinase and affords an optimized method to enhance myrosinase production.

Sustainable Use of Cruciferous Wastes in Nanotechnological Applications

Over the last few years, new nanoparticle preparation methods have emerged by replacing the usual reagents with plant extracts obtained in different conditions. An example of a natural plant extract is those of cruciferous vegetables, to obtain the new bio-nano-coatings. Given the composition of cruciferous extracts and large amounts of wastes produced all over the world, they can be successful substitutes to replace conventional coatings and extend the possibility of “smart coatings“. The present review aims to be a critical discussion regarding the application of cruciferous waste in nanotechnological applications. This review paper can be a starting report for different researchers who intend to use this sustainable approach “from green to nanotechnology” to transpose manufacturing from laboratory to industry. Applying this approach to obtain nanostructures with plant waste highlights the importance of minimizing and re-utilizing residues from primary and secondary processing via chemical and social intervention, in order to contribute to the sustainability needs of the planet and its inhabitants.