Formation and stability of Pickering emulsion gels by insoluble soy peptide aggregates through hydrophobic modification

Pickering emulsion gel of polyunsaturated fatty acid-rich oils stabilized by zein-tannic acid green nanoparticles for storage and oxidation stability enhancement

HYPOTHESIS

Poor storage stability and oxidative deterioration are the common drawbacks of edible oils rich in polyunsaturated fatty acids (PUFAs). We hypothesized that the natural zein/tannic acid self-assembly nanoparticles (ZT NPs) could be employed as stabilizers to anchor at the oil-water interface, thus constructing Pickering emulsion gel (PKEG) system for three types of PUFA-rich oils, soybean oil (SO), fish oil (FO) and cod liver oil (CLO), to improve the storage and oxidation stability.

EXPERIMENTS

ZT NPs were prepared by the anti-solvent coprecipitation method, and the three-phase contact angle, FT-IR, and XRD were mainly characterized. To observe the shell-core structure and oil-water interface details of SO/FO/CLO PKEGs by confocal laser scanning microscope and cryo-scanning electron microscope. Accelerated oxidation of FO was performed to assess the protective effect of PKEG on lipids.

FINDINGS

The SO, FO, and CLO PKEGs stabilized by 2 % ZT NPs, with oil fraction (φ = 0.5-0.6), were obtained. PKEGs show high viscoelasticity, clear shell-core structure spatial network structure, and ideal storage stability. Under accelerated oxidation, the degree of oxidative rancidity of FO PKEG was obviously lower than that of free FO. Overall, this work opens up new possibilities for using natural PKEG to prevent oxidative deterioration and prolong the shelf-life of PUFA-rich oils.

Bovine serum albumin-liposome stabilized high oil-phase emulsion: Effect of liposome ratio on interface properties and stability

This study aimed to solve the issue of poor lipophilicity of natural bovine serum albumin (BSA) by combining with liposomes (Lips) to stabilize high oil-phase emulsions (HOPEs). The interaction between BSA and Lips was mainly driven by hydrophobic forces, followed by hydrogen bonding. The secondary structure and tertiary structure of BSA were characterized and indicated that the addition of Lips promoted the structural expansion of BSA exposing the hydrophobic groups inside. Interfacial adsorption behaviours were assessed through dynamic interfacial tension, three-phase contact angle, and quartz crystal microbalance with dissipation. These results indicated that BSA-Lips crosslinking improved wettability, promoting adsorption and rearrangement at the oil-water interface, thereby resulting in a dense interfacial layer. The emulsifying efficacy of BSA-stabilized HOPEs also displayed a distinct Lips dependency. Varying the BSA-to-Lips ratio transformed their consistency from flowing to semi-solid, reinforcing the gel network. Under optimal conditions (BSA: Lips = 1:1), the droplet size of BSA-Lips stabilized HOPEs reached a minimum with a highly uniform distribution. Moreover, a 1:1 BSA to Lips ensured outstanding storage, thermal, and centrifugal stability for the HOPEs. This work provides valuable references for the interaction between protein and Lips, guiding the development of highly stable HOPEs stabilizers.

Alcalase-hydrolyzed insoluble soybean meal hydrolysate aggregates: Structure, bioactivity, function properties, and influences on the stability of oil-in-water emulsions

We studied the influences of hydrolysis time on the structure, functional properties, and emulsion stability of insoluble soybean meal hydrolysate aggregates (ISMHAs). We assume that the ISMHAs produced by soybean meal can be used as emulsifiers to prepare stable emulsions. The molecular weights of these ISMHAs were below 53 kDa. After hydrolysis, a decrease in α-helices and an increase in random coils indicated that the soybean meal proteins were unfolding. Moreover, the fluorescence intensity, UV absorption, and surface hydrophobicity of ISMHAs increased. These results would contribute to their antioxidant activity and functional properties. Additionally, the 90-min ISMHA sample exhibited the highest ABTS+• scavenging activity (80.02 ± 4.55 %), foaming stability (52.92 ± 8.06 %), and emulsifying properties (emulsifying activity index of 97.09 m2/g; emulsifying stability index of 371.47 min). The 90-min ISMHA emulsion exhibited the smallest particle size and excellent storage stability. Soybean meal peptide by-product emulsifier has potential for sustainable application.

Aggregate Size Modulates the Oil/Water Interfacial Behavior of Myofibrillar Proteins: Toward the Thicker Interface Film and Disulfide Bond

Myofibrillar protein (MP) aggregate models have been established to elucidate the correlation between their aggregate sizes and interfacial properties. The interfacial layer thickness was measured by the polystyrene latex method and quartz crystal microbalance with dissipation measurement. Interfacial conformations were then characterized in situ (front-surface fluorescence spectroscopy) and ex situ (reactive sulfhydryl group and secondary structure measurement following MP displacement). The viscoelasticity of the interfacial film and its resistance to surfactant-induced competitive displacement were reflected by the dilatational rheology and dynamic interfacial tension with the bulk phase exchange. Finally, we compared the findings of competitive displacement before/after adding a sulfhydryl-blocking agent, N-ethylmaleimide, to highlight the role of S-S linkage on interfacial film formation and stability. We substantiated that the aggregate size of the MP governed their interfacial properties. Small-sized aggregates exhibited more ordered secondary structures on the oil-water interface, which was conducive to the adsorption ratio of the protein and the adsorption dynamics. Although larger aggregates lowered the diffusion rate during interfacial film formation, they allowed the thicker and more viscoelastic interfacial film to be constructed afterward through more disulfide bond formation, resulting in greater resistance to surfactant-induced competitive displacement.

Pickering emulsions stabilized by soybean protein isolate/chitosan hydrochloride complex and their applications in essential oil delivery

In this work, fabrication of soybean protein isolate (SPI)/chitosan hydrochloride (CHC) composite particles stabilized O/W Pickering emulsions using soybean oil as an oil phase was optimized by examining the effects of pH, SPI/CHC mass ratio, SPI/CHC composite particle concentration and oil phase fraction on the stability of the emulsions. The results showed that under the conditions of SPI/CHC mass ratio 1:1, pH 4 and particle concentration 2 %, the SPI/CHC composite particles could stabilize the emulsions with oil phase fraction up to 80 %. At an oil phase fraction of 60 %, the emulsions had a minimum particle size. The microstructure, storage and oxidation stabilities and rheological properties of the emulsions were determined. Using this SPI/CHC composite particle-stabilized Pickering emulsion template, citrus essential oil (CEO) Pickering emulsion (CEOP) was prepared. CEOP was found to markedly inhibit two food-related microorganisms, Staphylococcus aureus and Escherichia coli. In addition, the CEOP emulsion dilution (containing 4500 μL CEO/L) not only improved the water solubility of CEO, but also effectively retarded the browning and bacterial growth of fresh-cut apple. The SPI/CHC-stabilized Pickering emulsion template constructed in this work provides a promising alternative for the delivery of antimicrobial essential oils in the food industry.

Whey Protein Isolate-Mesona chinensis Polysaccharide Conjugate: Characterization and Its Applications in O/W Emulsions

Mesona chinensis polysaccharide (MCP), a common thickener, stabilizer and gelling agent in food and pharmaceuticals, also has antioxidant, immunomodulatory and hypoglycemic properties. Whey protein isolate (WPI)-MCP conjugate was prepared and used as a stabilizer for O/W emulsion in this study. FT-IR and surface hydrophobicity results showed there could exist interactions between -COO- in MCP and -NH³⁺ in WPI, and hydrogen bonding may be involved in the covalent binding process. The red-shifted peaks in the FT-IR spectra suggested the formation of WPI-MCP conjugate, and MCP may be bound to the hydrophobic area of WPI with decreasing surface hydrophobicity. According to chemical bond measurement, hydrophobic interaction, hydrogen bond and disulfide bond played the main role in the formation process of WPI-MCP conjugate. According to morphological analysis, the O/W emulsion formed by WPI-MCP had a larger size than the emulsion formed by WPI. The conjugation of MCP with WPI improved the apparent viscosity and gel structure of emulsions, which was concentration-dependent. The oxidative stability of the WPI-MCP emulsion was higher than that of the WPI emulsion. However, the protection effect of WPI-MCP emulsion on β-carotene still needs to be further improved.

Protein-Based High Internal Phase Pickering Emulsions: A Review of Their Fabrication, Composition and Future Perspectives in the Food Industry

Protein-based high internal phase Pickering emulsions (HIPEs) are emulsions using protein particles as a stabilizer in which the volume fraction of the dispersed phase exceeds 74%. Stabilizers are irreversibly adsorbed at the interface of the oil phase and water phase to maintain the droplet structure. Protein-based HIPEs have shown great potential for a variety of fields, including foods, due to the wide range of materials, simple preparation, and good biocompatibility. This review introduces the preparation routes of protein-based HIPEs and summarizes and classifies the preparation methods of protein stabilizers according to their formation mechanism. Further outlined are the types and properties of protein stabilizers used in the present studies, the composition of the oil phase, the encapsulating substances, and the properties of the constituted protein-based HIPEs. Finally, future development of protein-based HIPEs was explored, such as the development of protein-based stabilizers, the improvement of emulsification technology, and the quality control of stabilizers and protein-based HIPEs.