The structure, antioxidant and antibacterial properties of thiol-modified soy protein isolate induced by allicin

Isolation of a surfactin-producing strain of Bacillus subtilis and evaluation of the probiotic potential and antioxidant activity of surfactin from fermented soybean meal

BACKGROUND

Surfactin, usually produced by microbial metabolism, has many advantages including low toxicity, high biodegradability, and stability at extreme pH levels and temperatures, making it suitable for industry. However, its commercial production has not yet been achieved.

RESULTS

A strain with a strong surfactin-producing ability was isolated and identified as Bacillus subtilis SOPC5, based on the appearance of colonies, microscopic observation, and 16S rDNA sequencing. The isolate exhibited significant tolerance to acid, bile, gastric, and intestinal juices, and was sufficiently susceptible to antibiotics. Bacillus subtilis SOPC5 showed high levels of auto-aggregation and surface hydrophobicity, and a strong capacity to secrete protease, amylase, and cellulase. The strain also exhibited antibacterial activity against Staphylococcus aureus 10 306 with a antibacterial circle diameter of 18.0 ± 1.1 mm. The maximal yield of surfactin (1.32 mg mL-1) was obtained by fermenting soybean meal (SBM) using the isolate under the following conditions: SBM 86 g L-1, inoculation 1.5 × 107 CFU mL-1, FeSO4 1.2 mg L-1, MnSO4 2.6 mg L-1, MgSO4 0.5 mg mL-1, L-Glu 4 mg L-1, temperature 33 °C, duration 120 h, and shaking at 210 rpm. The purity of surfactin was 97.42% as measured by high-performance liquid chromatography (HPLC). The half inhibitory concentration (IC50) values for surfactin to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (ABTS·+) were 1.275 ± 0.11 and 0.73 ± 0.08 mg mL-1, respectively.

CONCLUSION

This study provides a scientific basis for the application of B. subtilis SOPC5 (as a potential probiotic) and the preparation of its metabolic product (surfactin). © 2024 Society of Chemical Industry.

Pea protein/carboxymethyl cellulose complexes prepared using a pH cycle strategy as stabilizers of high internal phase emulsions for 3D printing

The development of food-grade high internal phase emulsions (HIPEs) for 3D printing and the replacement of animal fats have attracted considerable attention. In this study, in order to improve the rheological properties and stability of pea protein to prepare HIPE, pea protein/carboxymethyl cellulose (pH-PP/CMC) was prepared and subjected to pH cycle treatment to produce HIPEs. The results showed that pH cycle treatment and CMC significantly reduced the droplet size of HIPEs (from 143.33 to 12.10 μm). At higher CMC concentrations, the interfacial tension of the PP solution decreased from 12.84 to 11.71 mN/m without pH cycle treatment and to 10.79 mN/m with pH cycle treatment. The HIPEs with higher CMC concentrations subjected to pH cycle treatment showed shear thinning behavior and higher viscoelasticity and recovered their solid-like properties after being subjected to 50 % strain, indicating that they could be used for 3D printing. The 3D printing results showed that the pH-PP/CMC HIPE with 0.3 % CMC had the finest structure. Our work provides new insights into developing food-grade HIPEs and facilitating their use in 3D printing inks as nutrient delivery systems and animal fat substitutes.

Insights into Cold Plasma Treatment on the Cereal and Legume Proteins Modification: Principle, Mechanism, and Application

Cereal and legume proteins, pivotal for human health, significantly influence the quality and stability of processed foods. Despite their importance, the inherent limited functional properties of these natural proteins constrain their utility across various sectors, including the food, packaging, and pharmaceutical industries. Enhancing functional attributes of cereal and legume proteins through scientific and technological interventions is essential to broadening their application. Cold plasma (CP) technology, characterized by its non-toxic, non-thermal nature, presents numerous benefits such as low operational temperatures, lack of external chemical reagents, and cost-effectiveness. It holds the promise of improving proteins' functionality while maximally retaining their nutritional content. This review delves into the pros and cons of different cold plasma generation techniques, elucidates the underlying mechanisms of protein modification via CP, and thoroughly examines research on the application of cold plasma in augmenting the functional properties of proteins. The aim is to furnish theoretical foundations for leveraging CP technology in the modification of cereal and legume proteins, thereby enhancing their practical applicability in diverse industries.

Design and characterization of tannic acid/ε-polylysine biocomposite packaging films with excellent antibacterial and antioxidant properties for beef preservation

The shelf life of beef is shortened by microbial infection, which limits its supply in the market. Active packaging film is expected to overcome this difficulty. In this study, an antibacterial/antioxidant SS-ε-PL-TA biocomposite film made by soy protein isolate/sodium alginate/ε-polylysine/tannic acid was designed and prepared. Due to the formation of hydrogen bonds and enhanced hydrophobic interactions, the biocomposite film showed enhanced mechanical property. Tensile strength increased from 22.8 ± 2.59 MPa to 64.34 ± 6.22 MPa, and elongation at break increased from 7.70 ± 1.07 % to 13.98 ± 0.22 %. The composite film displayed excellent antibacterial activity owing to the damage to cell membranes and biofilms of bacteria. Furthermore, the antioxidant activity also significantly increased (DPPH ∙ scavenging activity was 78.0 %). The shelf life of beef covered with the SS-ε-PL-TA film was extended by 3 days compared to the control group by decreasing lipid oxidation and inhibiting bacterial growth, showing a good application potential in food packaging.

Fabrication of resveratrol-loaded soy protein isolate-glycyrrhizin nanocomplex for improving bioavailability via pH-responsive hydrogel properties

Resveratrol (RES) is a functional polyphenol that suffers from low water solubility and poor bioavailability. A novel RES-loaded soy protein isolate-dipotassium glycyrrhizinate (SPI-DG) nanocomplex (RES@SPI-DG) was designed and evaluated in this study. RES@SPI-DG was prepared using a simple but novel self-assembly ultrasonic-assisted pH-driven method. The interactions between RES and SPI-DG were non-covalent bonds, including hydrophobic interactions, hydrogen bonds, and van der Waals interactions. RES@SPI-DG exhibited high encapsulation efficiency (97.60 ± 0.38 %) and loading capacity (8.74 ± 0.03 %) of RES with a uniform small size (68.39 ± 1.10 nm). RES in RES@SPI-DG was in an amorphous state and demonstrated a 24-h apparent solubility 482.53-fold higher than bare RES. RES@SPI-DG also showed strong in vitro antioxidant properties. The pH-responsive hydrogel character of SPI-DG makes it an effective intestine-targeted delivery system that could retard the release of RES in a simulated stomach and accelerate it in a simulated intestine. In animal experiments, the bioavailability of RES@SPI-DG was 5.17 times higher than that of bare RES, and the biodistribution was also significantly improved. RES@SPI-DG demonstrated a strong hepatoprotective effect against overdose acetaminophen-induced liver injury. The SPI-DG complex might be a promising nano-platform for enhancing the bioavailability and efficacy of hydrophobic polyphenols such as RES.

Hexagonal plate ultrasound pretreatment on the correlation between soy protein isolate structure and cholesterol-lowering activity of peptides, and protein's enzymolysis kinetics, thermodynamics

In this study, a hexagonal plate ultrasound (HPU) pretreatment technology was employed to modify soy protein isolate (SPI) and enhance the hypocholesterolemic activity of enzymatic digests from SPI. Results demonstrated that under the condition of ultrasound power density of 40 W/L, the hypocholesterolemic activity of enzymatic digests from HPU-pretreated SPI (HPU-SPI) increased by 88.40 % compared to control group after gastrointestinal digestion. The sulfhydryl content of HPU-SPI increased by a maximum of 45.32 % compared to control group. Fourier transform infrared and scanning electron microscopy revealed that HPU pretreatment partially unfolded the SPI conformation, reduced the intermolecular interactions, and exposed the internal hydrophobic regions. Pearson correlation analysis showed that sulfhydryl groups (r = 0.860), disulfide bonds (r = -0.875) and random coil (r = 0.917) were strongly correlated with the cholesterol-lowering activity of soy protein hydrolysate (SPH), following a simulated gastrointestinal digestion. Finally, the effects of HPU pretreatment on enzymolysis kinetics and thermodynamics of the SPI enzymatic process showed that HPU pretreatment significantly reduced the Mie's constant, activation energy, activation enthalpy, activation entropy and Gibbs free energy. Overall, the study outcome suggested that HPU pretreatment could positively influence the hypocholesterolemic peptide activity, and thus, may be beneficial to the pharmaceutical/food industry.

Emulsification and encapsulation properties of conjugates formed between whey protein isolate and carboxymethyl cellulose under acidic conditions

In this study, carboxymethyl cellulose (CMC) was used to interact with whey protein isolate (WPI) to prepare conjugates as emulsifiers and embedding agents, which can be used under acidic conditions. Firstly, the effects of ratios and pH values on the formation of WPI-CMC conjugates were investigated. The turbidity and particle size of WPI were reduced in the presence of CMC at pH 4.6 (near the isoelectric point). Then the characterization of physicochemical properties indicated that electrostatic interactions played a major role in the formation of WPI-CMC conjugates, thereby changing the structure and function of conjugates. CMC and WPI reached the optimal aggregation state at pH 4.6 and a ratio of 4:1. The conjugates exhibited excellent emulsifying activity and stability for the oil-in-water emulsions. WPI-CMC conjugates also could provide protection to allicin by preventing degradation under environmental stresses, while maintaining its antioxidant activity.

Modification of whey protein isolate by ultrasound-assisted pH shift for complexation with carboxymethylcellulose: Structure and interfacial properties

The application of whey protein isolate (WPI) is limited because of its compact spherical structure. In this study, ultrasound-assisted pH shift was employed to modify WPI for complexation with carboxymethylcellulose (CMC). The foaming and emulsifying properties of WPI/CMC complexes were investigated. The results demonstrate that the pretreatment of ultrasound-assisted pH 12 shift increased the content of free sulfhydryl groups from 16.5 μmol/g to 34.7 μmol/g and enhanced protein hydrophobicity from 311.4 to 370.6 (p < 0.05). Compared to the complexes formed by untreated WPI and CMC, the complexes pretreated with ultrasound-assisted pH 12 shift had a smaller size of 293.4 nm and a more uniform distribution. Furthermore, WPI/CMC complexes pretreated by ultrasound-assisted pH 12 shift exhibited higher emulsifying activity and emulsion stability index, which were increased by 8.9 % and 42.6 % respectively, in comparison with the control group (p < 0.05). A positive correlation was found between the surface hydrophobicity of WPI and emulsifying activity of WPI/CMC complexes. Ultrasound-assisted pH 2 shift improved the foaming capacity of complexes by 28.3 % over the control (p < 0.05). All the results indicate that the interfacial properties of WPI/CMC complexes can be improved significantly by the combination of pH shift and ultrasound.

Mxene-Based Supramolecular Composite Hydrogels for Antioxidant and Photothermal Antibacterial Activities

Bacterial infections and oxidative damage caused by various reactive oxygen species (ROS) pose a significant threat to human health. It is highly desirable to find an ideal biomaterial system with broad spectrum antibacterial and antioxidant capabilities. A new supramolecular antibacterial and antioxidant composite hydrogel made of chiral L-phenylalanine-derivative (LPFEG) as matrix and Mxene (Ti3 C2 Tx ) as filler material is presented. The noncovalent interactions (H-bonding and π-π interactions) in between LPFEG and Mxene and the inversion of LPFEG chirality are verified by Fourier transform infrared and circular dichroism spectroscopy. The composite hydrogels show improved mechanical properties revealed by rheological analysis. The composite hydrogel system exhibits photothermal conversion efficiency (40.79%), which enables effective photothermal broad-spectrum antibacterial activities against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. Furthermore, the Mxene also enables the composite hydrogel to exhibit excellent antioxidant activity by efficiently scavenging free radicals like DPPH•, ABTS•+, and •OH. These results indicate that the Mxene-based chiral supramolecular composite hydrogel, with improved rheological, antibacterial, and antioxidant properties has a great potential for biomedical applications.

A curcumin-crosslinked bilayer film of soy protein isolate and chitosan with enhanced antibacterial property for beef preservation and freshness monitoring

In this study, antibacterial and antioxidant bilayer films were prepared by using curcumin (Cur) crosslinked soy rotein isolate (SPI) and chitosan (CS). Molecular docking simulations and multispectral analysis revealed that hydrogen bonding and hydrophobic interactions were the primary driving forces that promoted the self-assembly of the bilayer films. The tensile strength, the UV-blocking properties and the hydrophobicity was greatly improved of the bilayer antimicrobial films. Moreover, water vapor permeability, thermal shrinkage and opacity were all reduced significantly. In addition, the composite films with curcumin demonstrated effective antioxidant activity and a slow release characteristic. Morphology observation of the bacteria by AFM revealed that the antibacterial bilayer film had a significant damaging effect on the cell structures of S. aureus and E. coli due to the dual antibacterial effect of curcumin and chitosan. SPI + Cur-CS antimicrobial bilayer film effectively inhibited the growth of bacteria and extended the shelf life of beef. According to the findings, SPI + Cur-CS antimicrobial bilayer film can be used as an active package material for beef preservation and freshness monitoring.

Characterization of the interaction between allicin and soy protein isolate and functional properties of the adducts

BACKGROUND

Soybean meal, a by-product of the soybean oil production industry, has a high protein content but the compact globular structure of the protein from soybean meal limits its wide application in food processing. Allicin has been found to have numerous functional properties. In this study, allicin was interacted with soy protein isolate (SPI). The functional properties of the adducts were investigated.

RESULTS

Binding with allicin significantly quenched the fluorescence intensity of SPI. Static quenching was the main quenching mechanism. The stability of adducts decreased with increasing temperature. The greatest extent of binding between allicin and sulfhydryl groups (SH) of SPI was obtained at an allicin/SH molar ratio of 1:2. The amino groups of SPI did not bind with allicin covalently. Soy protein isolate was modified by allicin through covalent and non-covalent interactions. Compared with SPI, the emulsifying activity index and foaming capacity of adducts with a ratio of 3:1 were improved by 39.91% and 64.29%, respectively. Soy protein isolate-allicin adducts also exhibited obvious antibacterial effects. The minimum inhibitory concentrations (MICs) of SPI-allicin adducts on Escherichia coli and Staphylococcus aureus were 200 and 160 μg mL^-1 , respectively.

CONCLUSION

The interaction of allicin with SPI is beneficial for the functional properties of SPI. These adducts can be used in different food formulations as emulsifiers, foamers, and transport carriers. © 2023 Society of Chemical Industry.

The nutritional value, bioactive availability and functional properties of garlic and its related products during processing

Garlic, a common culinary spice, is cultivated and used around the globe. Consumption of garlic and its supplements reduces the risk of diabetes and cardiovascular disease and boosts the immune system with antibacterial, antifungal, anti-aging, and anti-cancer properties. Diallyl sulfide, diallyl disulfide, triallyl trisulfide, phenolics, flavonoids, and others are the most commercially recognized active ingredients in garlic and its products. In recent years, global demand for medicinal or functional garlic has surged, introducing several products such as garlic oil, aged garlic, black garlic, and inulin into the market. Garlic processing has been demonstrated to directly impact the availability of bioactive ingredients and the functionality of products. Depending on the anticipated functional qualities, it is also recommended that one or a combination of processing techniques be deemed desirable over the others. This work describes the steps involved in processing fresh garlic into products and their physicochemical alterations during processing. Their nutritional, phytochemical, and functional properties are also reviewed. Considering the high demand for functional food, this review has been compiled to provide guidance for food producers on the industrial utilization and suitability of garlic for new product development.

Quality Improvement of Garlic Paste by Whey Protein Isolate Combined with High Hydrostatic Pressure Treatment

Garlic, one of the most popular spices and medical herbs, has a unique pungent flavor and taste. Conventional homogenization and thermal treatment commonly lead to flavor and color deterioration in garlic paste, because allicin is highly susceptible to degradation and reaction. The present study was to investigate the effects of whey protein isolate (WPI) and different levels of high hydrostatic pressure (HHP, 200, 300, 400, 500, and 600 MPa) on the quality of garlic paste. Results showed that the addition of WPI in the homogenization of garlic significantly prevented green discoloration. Furthermore, WPI plus HHP under 500 MPa could better protect the color of garlic paste. Higher pressure (600 MPa) led to WPI aggregation, resulting in higher green color chroma of garlic paste. GC-MS results revealed that the application of WPI and HHP in garlic paste increased the relative level of pungent flavor compounds and decreased those of unpleasant odor compounds. The correlation analysis results revealed that WPI efficiently prevented garlic green discoloration, which is attributed to the thiol group in WPI exchanging the sulfonyl groups in allicin. In consideration of the microbial load, flavor and color quality of garlic paste, the optimal processing conditions were found at 500 MPa for 5 min with 2% WPI addition, extending shelf life to 25 days.