A highly selective and sensitive europium-organic framework sensor for the fluorescence detection of fipronil in tea

Smartphone-assisted fluorescent sensor for the visualization and quantitative detection of doxycycline and L-arginine

A novel smartphone-assisted fluorescent sensor based on europium/zirconium metal-organic framework (Eu0.5/Zr0.5-MOF) was developed for the fast and sensitive determination of doxycycline (DOX) and L-arginine (Arg). After the addition of DOX, the fluorescence of Eu0.5/Zr0.5-MOF was quenched owing to the inner filter effect (IFE). When Arg was introduced into the Eu0.5/Zr0.5-MOF@DOX complex system, the fluorescence was recovered because the interaction between Arg and Eu0.5/Zr0.5-MOF@DOX weakened the IFE. Moreover, the Eu0.5/Zr0.5-MOF produced continuous fluorescence color changes for the visual measurement of DOX and Arg. The fluorescent probe for DOX and Arg offered broad linear ranges of 0.05-80 and 0.1-60 μg/mL, respectively, with detection limits as low as 2.07 and 67.5 ng/mL. The proposed method was successfully applied to monitor DOX in eggs and Arg in human serum. This work provides a powerful platform for the real-time and visual analysis of DOX and Arg in food and biological samples.

A highly sensitive luminescent aptasensor utilizing MOF-74-co encapsulation of luminol in a 'turn-on' mode for streptomycin detection

This study focused on detecting streptomycin (STR) residues using a luminescent aptasensor encapsulated with aptamer. Utilizing MOF-74-Co with peroxidase-like activity, luminol was enclosed in its pores. The specific STR aptamer acted as a gatekeeper, ensuring excellent performance. Upon exposure to STR, the aptamers detached, releasing luminol and amplifying the luminescent signal through MOF-74-Co catalytic activity. A linear relationship between fluorescence intensity and STR concentration (50 nM ∼ 5 × 106 nM) was established, with a limit of detection of 0.065 nM. The sensor exhibited high selectivity for STR even in the presence of other aminoglycoside antibiotics. Applied to tea, egg, and honey samples, the sensor showed recovery rates of 91.38-100.2%, meeting safety standards. This MOF-based aptasensor shows promise for detecting harmful residues.

A portable Eu-MOF-loaded paper-based probe integrated with smartphone for the visual and on-site detection of Cr2O72- in aqueous media

The high toxicity of dichromate anion (Cr2O72-) its accurate necessitates its sensitive and effective detection to safeguard human health. The study introduces a Eu-MOF fluorescent probe, named as Eu-TDCA, synthesized using 2,5-thiophenedicarboxylic acid (H2TDCA) as a bridging ligand for the detection of Cr2O72- in aqueous media. The probe suspension can detect Cr2O72- through fluorescence quenching, and the detection process exhibits a wide linear range (0-85 and 85-230 mg/L), low limit of detection (LOD, 5.1 μg/L) and rapid response speed (2 min). Furthermore, a portable Eu-TDCA-loaded paper-based probe, integrated with a smartphone color recognition app, was developed for the visual, sensitive and quantitative detection of Cr2O72- in real lake and river water samples, achieving satisfactory recoveries of 99.72%-103.75 %. Additionally, an advanced logic gate device was designed to simplify the detection process, providing a new direction for intelligent on-line detection of analytes.

Highly selective and visual detection of vanillin based on fluorescence Cd-MOF sensor in milk powders

Vanillin is a commonly used synthetic flavoring agent in daily life. However, excessive intake of vanillin may pose risks to human health. Therefore, there is an urgent need for rapid and sensitive detection methods for vanillin. In this study, we developed a fluorescent sensor based on Cd-MOF for the sensitive and selective recognition of vanillin. The presence of vanillin leads to significant fluorescence quenching of Cd-MOF due to competitive absorption and photoinduced electron transfer (PET). The limit of detection was determined to be 39.6 nM, which is the lowest-among the reported fluorescent probes. The sensor was successfully applied for the detection of vanillin in real samples such as powdered milk and milk, with a recovery rate ranging from 96.88 % to 104.83 %. Furthermore, by immobilizing the Cd-MOF probe into a polyvinyl alcohol (PVA) film, we achieved a portable and visual detection composite materials for vanillin.

Recent and emerging trends of metal-organic frameworks (MOFs)-based sensors for detecting food contaminants: A critical and comprehensive review

Interest in the use of sensors based on metal-organic frameworks (MOFs) to detect food pollutants has been growing recently due to the desirable characteristics of MOFs, including uniform structures, large surface area, ultrahigh porosity and easy-to-functionalize surface. Fundamentally, this review offers an excellent solution using MOFs-based sensors (e.g., fluorescent, electrochemical, electrochemiluminescence, surface-enhanced Raman spectroscopy, and colorimetric sensors) to detect food contaminants such as pesticide residues, mycotoxins, antibiotics, food additives, and other hazardous candidates. More importantly, their application scenarios and advantages in food detection are also introduced in more detail. Therefore, this systematic review analyzes detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles utilized in preparing MOFs-based sensors. Additionally, the main limitations of each sensing type, along with the enhancement mechanisms of MOFs in addressing efficient sensing are discussed. Finally, the limitations and potential trends of MOFs-based materials in food contaminant detection are also highlighted.

A smartphone-integrated test paper sensing platform for visual and intelligent detection of nitrofurantoin in honey samples

The development of a rapid and convenient detection method for nitrofurantoin (NFT) residual is of great significance for food safety. Herein, a new fluorescent probe (Eu-TDCA-Phen) was developed for the visual and sensitive assay of NFT through the fluorescence quenching effect of inner filter effect (IFE) and photo-induced electron transfer (PET). The probe suspension demonstrates a wide linear range (0-0.16 mM), low detection limit (90 nM), high sensitivity, and rapid response time (2 min) in the "turn-off" process. To quantify the visual detection process, a smartphone-assisted test paper sensing platform was established and was applied for NFT determination in real honey samples, achieving satisfactory recovery rate ranges from 98.04 % to 105.04 %. Furthermore, a logic gate device was integrated with the sensing platform to streamline the visual detection process. The sensing platform offers several merits, including simpleness, quantification, portability and cost-effectiveness, making it highly suitable for real-time and on-site detection of antibiotics in food samples.

Smartphone-integrated paper-based sensing platform for the visualization and quantitative detection of pymetrozine

Pymetrozine (PYM) is an effective pyridine insecticide for controlling aphids, while its residues pose a serious threat to human health. Herein, a europium complex (Eu-DBPA, DBPA represents deprotonated 2,5-dibromoterephthalic acid ligand) probe was prepared for the detection of PYM via fluorescence quenching. The detection process has the advantages of short response time (2 min), wide linear range (0-4 and 4-45 mg/kg) and low detection limit (2.2 μg/kg). Furthermore, a portable detection platform was designed by integrating Eu-DBPA-based paper strip with smartphone and applied for the visual detection of PYM in real cucumber, tomato, cabbage and apple samples, obtaining satisfactory recovery (99.00 %-107.00 %) and low standard deviation (RSD < 3.4 %). In addition, a logic gate device was designed to simplify the detection process. The smartphone-integrated paper-based probe detection platform provides a new strategy for intelligent and online identification of hazards in environmental and biological samples.

Multiplex nanozymatic biosensing of Salmonella on a finger-actuated microfluidic chip

A colorimetric biosensor was elaboratively designed for fast, sensitive and multiplex bacterial detection on a single microfluidic chip using immune magnetic nanobeads for specific bacterial separation, immune gold@platinum palladium nanoparticles for specific bacterial labeling, a finger-actuated mixer for efficient immunoreaction and two coaxial rotatable magnetic fields for magnetic nanobead capture (outer one) and magnet-actuated valve control (inner one). First, preloaded bacteria, nanobeads and nanozymes were mixed through a finger actuator to form nanobead-bacteria-nanozyme conjugates, which were captured by the outer magnetic field. After the inner magnetic field was rotated to successively wash the conjugates and push the H2O2-TMB substrate for resuspending these conjugates, colorless TMB was catalyzed into blue TMBox products, followed by color analysis using ImageJ software for bacterial determination. This simple biosensor enabled multiplex Salmonella detection as low as 9 CFU per sample in 45 min.

A portable smartphone-assisted Tb-MOF-based agar-slice probe for the rapid and on-site fluorescence assay of malachite green in aquatic products

In this study, a new Tb-MOF fluorescence probe was developed for the detection of malachite green (MG) in real aquatic products. Fluorescence sensing experiments revealed that MG can effectively quench the green fluorescence of Tb-MOF suspensions, and the detection process exhibits the advantages of high sensitivity, a wide linear range (0-80 μM), a low detection limit (10.8 nM) and a rapid response time. Selective detection of MG is achieved primarily through fluorescence resonance energy transfer (FRET) and photoinduced electron transfer (PET) mechanisms. Furthermore, a smartphone-assisted Tb-MOF-based agar slice detection platform was constructed for the visual and quantitative detection of MG. Additionally, the on-site detection of MG in crucian and shrimp samples was accomplished with high recoveries (99.8 %-107.99 %) and low relative standard deviations (RSD < 2.2 %). This developed detection platform introduced a low-cost, portable and user-friendly approach for MG detection.

Highly sensitive ratiometric fluorescence detection of tetracycline residues in food samples based on Eu/Zr-MOF

The development of a simple, rapid, and sensitive method for monitoring antibiotic residues is crucial for maintaining food safety. Herein, a ratiometric fluorescence probe based on bimetallic organic framework (Eu/Zr-MOF) was developed for the detection of tetracycline (TC). The Eu/Zr-MOF was synthesized by the coordination of Eu3+ and Zr4+ with 2-APDC, which exhibited a grape-like cluster morphology and dual-emitting fluorescence at 430 nm/616 nm. Based on the internal filtering effect (IFE), significant fluorescence quenching was observed at 430 nm, whereas only slight changes occurred at 616 nm. The ratiometric sensing offered two broad linear ranges (0.5-8 μg/mL; 10-60 μg/mL) and a low detection limit (26.7 ng/mL). The proposed method was applied to the determination of TC in pork and water samples. Fluorescent sensors have the advantages of simple design, fast response, and high sensitivity, thus providing a promising means for evaluating the safety of food contaminated with TC.

Blue-emitting tryptophan-protected gold nanoclusters acted as a sensitive nanosensor for fluorescence sensing and visual imaging detection of furaltadone

Herein, blue-emitting gold nanoclusters (Au NCs) were carried out through tryptophan as the protecting and reducing agents. In aqueous solution of Au NCs@tryptophan, the addition of furaltadone guaranteed the interaction of furaltadone with tryptophan around Au NCs. The propinquity of furaltadone to Au NCs caused that the fluorescence of Au NCs was weakened by furaltadone based on the inner filter effect (IFE). Under the optimal measurement conditions, the logarithm of relative fluorescence intensity of Au NCs@tryptophan was linearly carried out with the furaltadone amount increasing from 0.5 to 100 μM, the corresponding detection limit was 0.087 μM. The fluorescence change of Au NCs@tryptophan displayed excellent selectivity and sensitivity for furaltadone than other possible substance in the human body. In view of Au NCs@tryptophan, the as-performed fluorescence nanosensor suggested outstanding ability for furaltadone sensing in real samples. Obviously, this nanoprobe of furaltadone could implement the naked-eye visual fluorescence determination of furaltadone.

A new N/Fe doped carbon dot nanosurface molecularly imprinted polymethacrylate nanoprobe for trace fipronil with SERS/RRS dimode technique

The N and Fe doped carbon dot (CDNFe) was prepared by microwave procedure. Using CDNFe as the nano-substrate, fipronil (FL) as the template molecule and α-methacrylic acid as the functional monomer, the molecular imprinted polymethacrylic acid nanoprobe (CDNFe@MIP) with difunction was synthesized by microwave procedure. The CDNFe@MIP was characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier infrared spectroscopy, and other techniques. The results show that the nanoprobe not only distinguish FL but also has a strong catalytic effect on the HAuCl4-Na2C2O4 nanogold indicator reaction. When the nanoprobes specifically recognize FL, their catalytic effect is significantly reduced. Since the AuNPs generated by HAuCl4 reduction have strong surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects, a SERS/RRS dual-mode sensing platform for detecting 5-500 ng/L FL was constructed. The new analytical method was applied to detect FL in food samples with a relative standard deviation (RSD) of 3.3-8.1 % and a recovery rate of 94.6-104.5 %.

A dual-functional fluorescence probe CDs@ZIF-90 for highly specific detection of Al3+ and Hg2+ in environmental water samples

In recent years, the escalating water pollution has resulted in serious harm to human health and ecological environment due to the excessive discharge of toxic metal ions such as Al3+ and Hg2+. Therefore, it is crucial to develop a simple, efficient, and rapid detection method for monitoring the levels of the metal ions in water environment to ensure public health and ecological safety. In this study, carbon dots (CDs) containing heteroatom Si were successfully synthesized by the solvothermal method. Subsequently, a novel dual-functional fluorescent sensor (CDs@ZIF-90) was constructed by integrating CDs with zeolitic imidazolate framework-90 (ZIF-90). The fluorescent composite CDs@ZIF-90 showed outstanding optical properties and excellent structural and luminescence stability in aqueous medium. Particularly, its fluorescence at 453 nm can be remarkably enhanced by Al3+ and quenched upon exposure to Hg2+. As a result, the CDs@ZIF-90 was applied in sensitive and selective determination of Al3+ and Hg2+ ions with wide linear ranges (1-200 μM and 0.05-240 μM) and low detection limits (0.81 μM and 19.6 nM). Moreover, a convenient and rapid fluorescence test strip was also successfully prepared for visual detection of Al3+ and Hg2+ ions. This work is the first try to use the CDs@ZIF-90 fluorescence sensing material for highly sensitive and selective determination of Al3+ and Hg2+ based on "turn-on" and "turn-off" dual modes, respectively and it provides a new idea for monitoring quality of drinking water and environmental water. It is of great significance for human health and environmental protection.

Fluorescence sensing and device fabrication with luminescent metal-organic frameworks

Metal-organic frameworks (MOFs) are a novel class of hybrid porous multi-functional materials consisting of metal ions/clusters and organic ligands. MOFs have exclusive benefits due to their tunable structure and diverse properties. Luminescent MOFs (LMOFs) exhibit both porosity and light emission. They display abundant host and guest responses, making them conducive to sensing. Currently, LMOF sensing research is gaining more depth, with attention given to their device and practical applications. This work reviews recent advancements and device applications of LMOFs as chemical sensors toward ions, volatile organic compounds, biomolecules, and environmental toxins. Furthermore, the detection mechanism and the correlation between material properties and structure are elaborated. This analysis serves as a valuable reference for the preparation and efficient application of targeted LMOFs.

An intelligent smartphone-test strip detection platform for rapid and on-site sensing of benzoyl peroxide in flour samples

Benzoyl peroxide (BPO) is a commonly used flour whitener, but its excessive usage can have adverse effects on human health, such as nutrient loss, vitamin deficiencies and certain diseases. In this study, a europium metal organic framework (Eu-MOF) fluorescence probe was prepared, which exhibited a strong fluorescence emission at 614 nm upon excitation at 320 nm, with a high quantum yield of 8.11%. The red fluorescence of the probe could be effectively quenched by BPO through the inner filter effect (IFE) and photoinduced electron transfer (PET) mechanism. The detection process offered several advantages, including a wide linear range of 0-0.95 mM, a low detection limit of 66 nM and a fast fluorescence response of 2 min. Furthermore, an intelligent detection platform was designed to enhance the practical application of the detection method. This platform combined the portability and visuality of a traditional test strip with the color recognition capability of a smartphone, allowing for the visualization and quantitative detection of BPO in a convenient and user-friendly manner. The detection platform was successfully applied to the analysis of BPO in real flour samples with satisfactory recoveries (99.79%-103.94%), suggesting a promising strategy for the rapid and on-site detection of BPO in food samples.

A smartphone-assisted paper-based ratio fluorescent probe for the rapid and on-site detection of tetracycline in food samples

Rapid, sensitive and portable analytical methods for on-site detection of tetracycline (TC) in food samples is of critical importance for food safety and public health. In this study, a dual-emission ratio fluorescent probe (Gd0.9@Eu0.1) was prepared and utilized for the detection of tetracycline (TC) by observing the fluorescence color change from blue to red. The detection process exhibits a wide linear range (0-52.0 μM), good selectivity and low detection limit (14 nM). A paper-based probe and a colorimetric card was constructed for the visual detection of TC. Furthermore, a novel and portable detection platform combining smartphone and test strip was exploited for the quantitative and on-site detection of TC in real pork sample. The developed method was validated through intra- (n = 5) and inter-day (n = 2) measurements, as well as comparison with a traditional HPLC method. These statistical result validate the reliability and accuracy of the developed method. This intelligent detection platform represents a promising approach for the rapid, sensitive and visual detection of TC in food samples.

Smartphone-integrated ratiometric fluorescence sensing platform based on bimetallic metal-organic framework nanowires for anthrax biomarker detection

Developing an intelligent, sensitive, and visual strategy for quickly identifying anthrax biomarkers is crucial for ensuring food safety and preventing disease outbreaks. Herein, a smartphone-integrated ratiometric fluorescent sensing platform based on bimetallic metal-organic framework (Eux/Tb1-x-MOF) nanowires was designed for specific recognition of pyridine-2,6-dicarboxylic acid (DPA, anthrax biomarker). The Eux/Tb1-x-MOF was prepared by coordinating Eu3+ and Tb3+ with BBDC ligands, which exhibited a uniform fibrous morphology and dual-emission fluorescence at 543 and 614 nm. After the introduction of DPA, the red emission at 614 nm displayed obvious fluorescence quenching, while the green emission at 543 nm was gradually enhanced. The ratiometric sensing offered a wide linear equation in the range of 0.06-15 µg/mL and a low detection limit (LOD) of 20.69 ng/mL. Furthermore, a portable smartphone installing the color recognition application can achieve sensitive, real-time, and visual detection of DPA. As a simple and effective smartphone-assisted sensing platform, this work holds admirable promise to broaden the applications in biomarker real-time determinations and other fields.

Machine Learning-Assisted High-Throughput Strategy for Real-Time Detection of Spermine Using a Triple-Emission Ratiometric Probe

In this study, we designed and fabricated a spermine-responsive triple-emission ratiometric fluorescent probe using dual-emissive carbon nanoparticles and quantum dots, which improve the sensor's accuracy and reduce interfering environmental effects. The probe is advantageous for the proportionate detection of spermine because it has good emission resolution, and the maximum points of the two emission peaks differ by 95 nm. As a proof of concept, cuvettes and a 96-well plate were combined with a smartphone and YOLO series algorithms to accomplish real-time, visual, and high-throughput detection of seafood and meat freshness. In addition, the reaction mechanism was verified by density functional theory and fundamental characterizations. Upon exposure to different amounts of spermine, the intensity of the fluorescent probe changed linearly, and the fluorescent color shifted from yellow-green to red, with a limit of detection of 0.33 μM. To enable visual identification of food-originated spermine, a hydrogel-based visual sensing platform was successfully developed utilizing the triple-emission fluorescent probe. Consequently, spermine could be identified and quantified without complicated equipment.

Achiral Sm(III)-Based Metal-Organic Framework as a Luminescence Sensor for Enantiodiscrimination of Quinine and Quinidine

The effective discrimination and determination of the chiral antimalarial drugs quinine (QN) and quinidine (QD) are extremely important for human health. Herein, a 2D achiral Sm-based metal-organic framework (IMU-MOF1 = [Sm(tpba)(L)]n, where Htpba = 4-(2,2':6″,2'-terpyridin)-4'-ylbenzioc acid and H2L = 2,2'-biquinoline-4,4'-dicarboxylic acid) was successfully prepared by the solvothermal method. More importantly, IMU-MOF1 was designed as an ultrasensitive fluorescent probe for the identification of chiral enantiomer drugs. The limits of detection for QN and QD are 4.24 × 10-11 and 7.54 × 10-12 M, respectively. Furthermore, it was demonstrated that the stronger hydrogen-bonding interactions between IMU-MOF1 and quinine furnish a more efficient energy transfer to the ligands in the sensing process, resulting in a significant fluorescence enhancement of IMU-MOF1.