A sensitized ratiometric fluorescence probe based on N/S doped carbon dots and mercaptoacetic acid capped CdTe quantum dots for the highly selective detection of multiple tetracycline antibiotics in food

Centrifugated lateral flow assay strips based on dual-emission carbon dots modified with europium ions for ratiometric determination and on-site discrimination of tetracyclines in environment

Due to the serious detrimental impact on human health, antibiotic pollution particularly tetracyclines residues has become a serious problem. Herein, a multiple response fluorescent probe consisted of dual-emission carbon dots and Eu3+ (D-CDs@Eu3+) is designed for the determination and discrimination of tetracyclines (TCs). Specifically, the carboxyl and amidogen group of dual-emission carbon dots (D-CDs) can coordinate with Eu3+ to form the D-CDs@Eu3+. Upon adding TCs, the fluorescence intensities of D-CDs at 405 nm and 495 nm are quenched due to inner filter effect (IFE) and the localization of fluorescence resonance energy transfer (L-FRET) between the D-CDs@Eu3+ and TC. Simultaneously, the D-CDs@Eu3+ may chelate with TCs to enhance the occurrence of antenna effect, while the characteristic peaks of Eu3+ at 590 nm and 615 nm are enhanced. On these bases, the TCs detection is achieved with low detection limits from 46.7 to 72.0 nM. Additionally, through the distinct efficiencies of L-FRET, the discrimination of TCs is achieved. Moreover, a novel centrifugated lateral flow assay strips (CLFASs) device is developed by integrating the D-CDs@Eu3+, lateral flow assay strips and smartphone using RGB variations for TCs detection, achieving remarkable recoveries (98.6-103.7 %) in real samples. Therefore, this CLFASs device provides a reliable approach for the TCs detection, demonstrating potential applications.

Colorimetric aptasensor based on peroxidase-mimetic metal-organic framework nanoparticles and magnetic carbon dots for visual detection of Staphylococcus aureus

A colorimetric aptasensor based on the dual recognition of magnetic carbon dots (M-CDs) and copper-based metal-organic frameworks (Cu-MOFs) was constructed for the visual detection of Staphylococcus aureus (S. aureus). Aptamer-modified Cu-MOFs could specifically identify target bacteria and exhibited peroxidase-like activity by catalyzing the colorimetric reaction of the 3,3',5,5'-tetramethylbenzidine-H2O2 (TMB-H2O2) system. M-CDs electrostatically attracted bacteria because of their strong positive electrical properties and offered better capturing performance compared with magnetic beads owing to their smaller size. Visual detection of the target was achieved using the color change of the reaction catalyzed by the resuspension of the sandwich-structured complex. The bacteria were sensitively detected with a limit of detection (LOD) of 1 CFU mL-1 using the peroxidase catalytic activity of Cu-MOFs. Non-target bacteria produced negative results, demonstrating the excellent selectivity of the proposed aptasensor. The strategy showed good recovery in real sample detection, showing great potential for visual monitoring of pathogenic bacteria, and could provide a reference for further development of novel sensing platforms for bacterial detection.

Detection methods for antibiotics in wastewater: a review

Antibiotics are widely used as fungicides because of their antibacterial and bactericidal effects. However, it is necessary to control their dosage. If the amount of antbiotics is too much, it cannot be completely metabolized and absorbed, will pollute the environment, and have a great impact on human health. Many antibiotics usually left in factory or aquaculture wastewater pollute the environment, so it is vital to detect the content of antibiotics in wastewater. This article summarizes several common methods of antibiotic detection and pretreatment steps. The detection methods of antibiotics in wastewater mainly include immunoassay, instrumental analysis method, and sensor. Studies have shown that immunoassay can detect deficient concentrations of antibiotics, but it is affected by external factors leading to errors. The detection speed of the instrumental analysis method is fast, but the repeatability is poor, the price is high, and the operation is complicated. The sensor is a method that is currently increasingly studied, including electrochemical sensors, optical sensors, biosensors, photoelectrochemical sensors, and surface plasmon resonance sensors. It has the advantages of fast detection speed, high accuracy, and strong sensitivity. However, the reproducibility and stability of the sensor are poor. At present, there is no method that can comprehensively integrate the advantages. This paper aims to review the enrichment and detection methods of antibiotics in wastewater from 2020 to the present. It also aims to provide some ideas for future research directions in this field.

Ratiometric fluorescence sensor based on deep learning for rapid and user-friendly detection of tetracycline antibiotics

The detection of tetracycline antibiotics (TCs) in food holds great significance in minimizing their absorption within the human body. Hence, this study aims to develop a rapid, convenient, real-time, and accurate detection method for detecting antibiotics in an authentic market setting. A colorimetric fluorescence sensor was devised for tetracycline detection utilizing PVA aerogels as the substrate. Its operating principle is based on the IFE effect and antenna effect. A detection device is designed to capture fluorescence images while deep learning was employed to aid in the detection process. The sensor exhibits high responsiveness with a mere 60-s requirement for detection and demonstrates substantial color changes(blue to red), achieving 99% accuracy within the range of 10-100 μM with the assistance of deep learning (Resnet18). Real sample simulation tests yielded recovery rates between 95% and 130%. Overall, the proposed strategy proved to be a simple, portable, reliable, and responsive solution for rapid real-time TCs detection in food samples.

The Potential of Single-Chain Variable Fragment Antibody: Role in Future Therapeutic and Diagnostic Biologics

The advancement of genetic engineering has revolutionized the field of immunology by allowing the utilization of intrinsic antibody structures. One of the biologics that are being produced by recombinant antibody technology is single-chain fragments variable (scFv). Genes of variable regions, the heavy and light chains that are genetically linked into a single transcript by a short flexible linker peptide, are used to generate this fragment from cellular and synthetic libraries. The specificity and affinity of these molecules are comparable to those of parental antibodies. Fusion with marker proteins and other potent molecules improves their stability, circulation half-life, activity, and efficient purification. Besides, this review comprises construction protocols, therapeutics, and diagnostic applications of scFv, as well as related challenges. Nonetheless, there are still issues with efficacy, stability, safety, intracellular administration, and production costs that need to be addressed.

Ratiometric fluorescence method comprising carbon dots and rhodamine 6G encapsulated in metal-organic framework microcubes for curcumin detection

A ratiometric fluorescence method comprising carbon dots (CDs) and rhodamine 6G (Rh-6G) encapsulated in the microcubes of metal-organic framework (MOF-5) is introduced for the sensitive detection of curcumin (Cur) in condiments. CDs@MOF-5@Rh-6G, synthesized by the adsorption of Rh-6G on MOF-5 embedded with CDs, showed two distinct emission peaks at 435 and 560 nm under excitation at 335 nm, and could be used for Cur detection by ratiometric fluorescence. In the presence of Cur, the fluorescence of the CDs at 435 nm (F435) was quenched by Cur owing to internal filtering and dynamic quenching effects, whereas the emission of Rh-6G at 560 nm (F560) remained unchanged (335 nm is the excitation wavelength, 435 and 560 nm are the emission wavelengths, in which F435/F560 values are used as the output results). Under optimal conditions, a linear relationship was observed between the Cur concentration (in the range 0.1-5 μmol/L) and F435/F560 value for CDs@MOF-5@Rh-6G, with a detection limit of 15 nmol/L. Notably, the proposed method could accurately detect Cur in mustard, curry, and red pepper powders. Therefore, this study could improve the quality control of food and facilitate the development of sensitive ratiometric fluorescence probes.

Dual-emission carbon dots for ratiometric fluorescence sensing of thiabendazole in fruits

Quantitative determination of pesticides in fruits and vegetables is essential for human healths. Herein, a new dual-emission carbon dots with high fluorescence stability at a pH range of 4-10 and a temperature range of 0-60 °C was synthesized. And a novel ratiometric fluorescence probe was proposed to detect thiabendazole (TBZ) residue with a wide linear range (0-1000 μM) and low detection limit (0.15 μM). The emission at 512 nm exhibited a special "turn-off" fluorescence sensing of TBZ due to internal filter effect, while that at 361 nm barely changed and worked as reference. Furthermore, the ratiometric fluorescence strategy was successfully applied for determining TBZ in fruits with good recoveries (96.73%-111.17 %, 93.29%-120.78 % and 96.28%-100.57 %, respectively). Notably, the constructed ratiometric fluorescence probe had comparable accuracy to HPLC in detecting unknown concentrations of TBZ in pear juice, demonstrating dual-emission carbon dots possess wide and promising applicability for fluorescence sensing pesticides in the future.

A ratiometric fluorescent indicator-displacement assay for on-site determination and intracellular imaging of nitroxinil

Nitroxinil (NIT) is a widely using veterinary medicine to protect cattle and sheep yet may threaten human health when ingested through food chain. Developing fluorescent analytical methods in ratiometric manners was essential for the on-site detection and in-situ monitoring of NIT but still challenging. Here, we improved the indicator-displacement assay (IDA)-based method and designed the first ratiometric fluorescent probe for NIT by using an albumin host and an Aggregation-induced emission (AIE) guest. This probe exhibited fast response (10 s), high sensitivity (limit of detection: 4.6 ppb), good selectivity (over twelve medicines) and eye-discriminable fluorescent color change (green-red) upon responding to NIT. Based on these properties, this probe enabled quantitative determination of NIT in real food samples, on-site analysis via a paper-based test strip, and fluorescence imaging of NIT in living cells.

A paper-based ratiometric fluorescence sensor based on carbon dots modified with Eu3+ for the selective detection of tetracycline in seafood aquaculture water

Paper-based ratiometric fluorescence sensors are normally prepared using two or more types of fluorescent materials on a paper chip for simple, low-cost and fast detection. However, the choice of multi-step and one-step modifications on the paper chip affects the analytical performance. Herein, a novel paper-based dual-emission ratiometric fluorescence sensor was designed for the selective detection of tetracycline (TC). Carbon dots (CDs) modified with Eu3+ were combined with a sealed paper-based microfluidic chip by two methods: one-step grafting of CDs-Eu3+ on paper and step-by-step grafting of CDs and Eu3+ on paper. The analytical performance was studied and optimized respectively. The red fluorescence of Eu3+ at 450 nm is enhanced and the blue fluorescence of CDs at 617 nm is quenched by energy transfer in the presence of TC. Under optimal conditions, TC is selectively determined in the linear range from 0.1 μM to 100 μM with a detection limit of 0.03 μM by the step-by-step grafting method. In addition, the sealed paper chip could effectively prevent pollution and volatilization from the reagent. This technique has been used to analyze TC in seafood aquaculture water with satisfactory results.

Fluorescent and smartphone imaging detection of tetracycline residues based on luminescent europium ion-functionalized the regular octahedral UiO-66-NH2

Antibiotic residues cause extensive damage to food security, thus arousing serious concerns. Hence, rapid and sensitive detection of antibiotic residues is crucial to food safety. This study aimed to propose a portable, visual, intelligent and rapid method for tetracycline detection. We developed a ratiometric fluorescent sensor based on the Eu3+-functionalized regular octahedral UiO-66-NH2 material. The developed sensor could quantify tetracycline in the concentration range of 0.5-200 μM with a detection limit as low as 0.2 μM under the optimum conditions. Furthermore, the analytical results obtained using the designed sensor in the actual samples were basically consistent with those obtained using high-performance liquid chromatography. Based on these achievements, a smartphone application-integrated fluorescent testing paper was designed for facile, intelligent, and visual detection of tetracycline. The integrated portable sensor not only saved cost and time for testing but also provided a forward-looking approach to fast, sensitive detection of antibiotic residues.

Aptamer tuned nanozyme activity of nickel-metal-organic framework for sensitive electrochemical aptasensing of tetracycline residue

It is urgently needed to develop high-performance method for tetracycline (TC) analysis to meet the growing concerns about food safety. Herein, a MOF of Ni2+-2,3,6,7,10,11-hexahydroxytriphenylene (Ni-HHTP) with peroxidase activity has been prepared and coated on a screen printing electrode, followed by non-covalent adsorption of tetracycline aptamer (TC-Apt) through the π-stacking. The spectroscopic and electrochemical assays show that TC-Apt can effectively enhance the nanozyme activity of Ni-HHTP using 3,3',5,5'-tetramethylbenzidine (TMB)/H2O2 as the probe. Upon binding with TC, the configuration of TC-Apt is changed and desorbs from the Ni-HHTP, resulting in the decrease of the nanozyme activity of aptasensor. Based on this principle, the target TC can be analyzed in concentrations ranging from 10 pM to 1.0 μM, with a detection limit of 1.9 pM. The aptsensor is also applicable for TC analysis in fresh Ctenopharyngodon idella meat and milk, which provides a new approach for TC residue monitoring in food.

Discrimination of cis-diol-containing molecules using fluorescent boronate affinity probes by principal component analysis

Fluorescent boronate affinity molecules have gained increasing attention in the field of fluorescence sensing and detection due to their selective recognition capability towards cis-diol-containing molecules (cis-diols). However, the conventional fluorescent boronate affinity molecules face a challenge in differentiating the type of cis-diol only by their fluorescence responses. In this study, a simple method was used to discriminate different types of cis-diols, including nucleosides, nucleotides, sugars, and glycoproteins based on the phenylboronic acid-functionalized fluorescent molecules combined with principal component analysis (PCA). Both fluorescent molecules were simply synthesized by the covalent interaction between the amino group in 3-aminophenyl boronic acid and the isothiocyanate group in fluorescein or rhodamine B. In view of their fluorescence-responsive behaviors to these cis-diols directly, it is impossible to differentiate their types even under the optimized experimental conditions. When PCA was employed to treat the fluorescence response data and the quenching constants with their molecular weight, different types of cis-diols can be distinguished successfully. As a result, by integrating the fluorescence response of the boronate affinity probes with PCA, it can greatly improve the specific recognition capability of the boronic acids, providing a simple and direct way to distinguish and identify different types of cis-diols.

Synthesis of pH-Sensitive Nitrogen-Doped Carbon Dots with Biological Imaging Function and Their Application in Cu2+ and Fe2+ Determination by Ratiometric Fluorescent Probes

pH-sensitive nitrogen-doped carbon dots (N-CDs) were synthesized using immature seeds of elm trees as a carbon source and ethylenediamine as a coreactant through a facile one-step hydrothermal method. The N-CDs were characterized using fluorescence spectroscopy, fluorescence lifetime, ultraviolet-visible absorption, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy, as well as transmission electron microscopy. The N-CDs displayed excellent fluorescence properties and responded to pH changes. The N-CDs exhibited low toxicity and good biocompatibility and had the potential to be used for the biological imaging of HeLa cells and mung bean sprouts. Utilizing the mechanism of fluorescence resonance energy transfer, ratiometric fluorescent probes were prepared by simple mixing of N-CDs and fluorexon in a Britton-Robinson buffer solution. The ratiometric fluorescent probe was used to detect Cu2+ and Fe2+. The linear equations were RCu = -0.0591[Q] + 3.505 (R2 = 0.992) and RFe = -0.0874[Q] + 3.61 (R2 = 0.999). The corresponding limits of detection were 0.5 and 0.31 μM, respectively. The good results had been obtained in the actual samples detection.

Y3+@CdTe quantum dot nanoprobe as a fluorescence signal enhancement sensing platform for the visualization of norfloxacin

Quinolone antibiotics (norfloxacin) pose a serious threat to animal and human health due to their misuse and difficulty in being broken down in surface water and food. Rapid and effective detection of norfloxacin (NOR) is essential for environmental testing and ecosystems. In this study, yttrium was coordinated with mercaptopropionic acid (MPA)-modified CdTe quantum dots (QDs) to obtain a novel fluorescence sensor Y³⁺@CdTe QDs for the sensitive detection of NOR. NOR can bind to Y³⁺ to form a complex (NOR-Y³⁺). This complex enhances the luminescence of NOR and blue-shifts to 423 nm. The fluorescence intensity of NOR-Y³⁺ at 423 nm (I₄₂₃) gradually increased with increasing NOR concentration; meanwhile, the fluorescence intensity of CdTe QDs at 634 nm (I₆₃₄) gradually decreased due to aggregation induction. The ratio of I₄₂₃ to I₆₃₄ was used for the quantitative determination of NOR. The linear range of the constructed fluorescent probes was from 1.0 to 150.0 μM, with a detection limit of 31.8 nM. CdTe QDs act as a red fluorescent background, and with the addition of NOR, the color of the system transitions from red to purple and finally blue. This method was rapid (immediate) and visual, providing a simple analysis of various actual samples (tap water, lake water, honey, milk and human serum) for NOR.