Comparative analysis of exopolysaccharide-producing Lactiplantibacillus plantarum with ropy and non-ropy phenotypes on the gel properties and protein conformation of fermented milk

Improvement of physicochemical properties and quercetin delivery ability of fermentation-induced soy protein isolate emulsion gel processed by ultrasound

This study aimed to investigate the effects of ultrasonic treatment at different powers on the physicochemical properties, microstructure and quercetin delivery capacity of fermentation-induced soy protein isolate emulsion gel (FSEG). The FSEG was prepared by subjecting soy protein isolate (SPI) emulsion to ultrasonic treatment at various powers (0, 100, 200, 300, and 400 W), followed by lactic acid bacteria fermentation. Compared with the control group (0 W), the FSEG treated with ultrasound had higher hardness, water holding capacity (WHC) and rheological parameters. Particularly, at an ultrasonic power of 300 W, the FSEG had the highest hardness (101.69 ± 4.67 g) and WHC (75.20 ± 1.07%) (p < 0.05). Analysis of frequency sweep and strain scanning revealed that the storage modulus (G') and yield strains of FSEG increased after 300 W ultrasonic treatment. Additionally, the recovery rate after creep recovery test significantly increased from 18.70 ± 0.49% (0 W) to 58.05 ± 0.54% (300 W) (p < 0.05). Ultrasound treatment also resulted in an increased β-sheet content and the formation of a more compact micro-network structure. This led to a more uniform distribution of oil droplets and reduced mobility of water within the gel. Moreover, ultrasonic treatment significantly enhanced the encapsulation efficiency of quercetin in FSEG from 81.25 ± 0.62 % (0 W) to 90.04 ± 1.54% (300 W). The bioaccessibility of quercetin also increased significantly from 28.90 ± 0.40% (0 W) to 42.58 ± 1.60% (300 W) (p < 0.05). This study enriches the induction method of soy protein emulsion gels and provides some references for the preparation of fermented emulsion gels loaded with active substances.

Genomic and functional evaluation of exopolysaccharide produced by Liquorilactobacillus mali t6-52: technological implications

BACKGROUND

This study explores the biosynthesis, characteristics, and functional properties of exopolysaccharide produced by the strain Liquorilactobacillus mali T6-52. The strain demonstrated significant EPS production with a non-ropy phenotype.

RESULTS

The genomic analysis unveiled genes associated with EPS biosynthesis, shedding light on the mechanism behind EPS production. These genes suggest a robust EPS production mechanism, providing insights into the strain's adaptability and ecological niche. Chemical composition analysis identified the EPS as a homopolysaccharide primarily composed of glucose, confirming its dextran nature. Furthermore, it demonstrated notable functional properties, including antioxidant activity, fat absorption capacity, and emulsifying activity. Moreover, the EPS displayed promising cryoprotective activities, showing notable performance comparable to standard cryoprotective agents. The EPS concentration also demonstrated significant freeze-drying protective effects, presenting it as a potential alternative cryoprotectant for bacterial storage.

CONCLUSIONS

The functional properties of L. mali T6-52 EPS reveal promising opportunities across various industrial domains. The strain's safety profile, antioxidant prowess, and exceptional cryoprotective and freeze-drying characteristics position it as an asset in food processing and pharmaceuticals.

Effect of Lactobacillus helveticus exopolysaccharides molecular weight on yogurt gel properties and its internal mechanism

The processing characteristics of yogurt are closely related to the composition and arrangement of exopolysaccharides (EPS) in lactic acid bacteria (LAB). To fully understand and develop the functional properties of EPS and to study the effect of EPS molecular weight on yogurt and its mechanism, the physicochemical properties of high molecular weight EPS-LH43, medium molecular weight EPS-LH13, and low molecular weight EPS-LH23, as well as the gel properties and protein conformation of yogurt, were determined and analyzed in this experiment. The results indicate that EPS-LH43 and EPS-LH13 are both composed of mannose, rhamnose, galacturonic acid, glucose, and galactose. EPS-LH23 is composed of mannose, galacturonic acid, glucose, and galactose. Their Number-average Molecular Weight is 5.21 × 106 Da, 2.39 × 106 Da and 3.76 × 105 Da, respectively. In addition, all three types of EPS have good thermal stability and can improve the stability of casein. In addition, the analysis of the texture, particle size, potential, water holding capacity, rheology, low field nuclear magnetic resonance, microstructure, and flavor characteristics of yogurt confirmed the relationship between the molecular weight of LAB EPS and the gel properties of yogurt. Fluorescence spectrophotometer and circular dichroism analysis indicate that the different molecular weights of LAB EPS have different effects on protein structure, which is an intrinsic factor leading to significant differences in the gel properties of the three types of fermented milk. These findings provide new references for enhancing the understanding of the structure-activity relationship of EPS and indicate that EPS-LH43 can be used to improve the gel properties of dairy products.

Effect of exopolysaccharides yield and addition concentration of Lactobacillus helveticus on the processing characteristics of fermented milk and its mechanism

Exopolysaccharides (EPS) yield and added concentration of lactic acid bacteria can greatly affect the processing characteristics of fermented milk. In order to investigate the effects and mechanisms of EPS yield and added concentration on fermented milk, researchers extracted EPS from 50 strains of Lactobacillus helvedicus (L. helvedicus) and selected the two strains with the largest difference in EPS yield (L. helvedicus LH18 and L. helvetigus LH33) for subsequent experiments. The physicochemical properties of EPS-LH18 and EPS-LH33 were analyzed. The gel characteristics and protein conformation of fermented milk were studied by means of texture analyzer, rheometer, scanning electron microscopy, nuclear magnetic resonance machine, fluorescence spectrophotometer and circular dichroism. The results indicate that the monosaccharide compositions of EPS-LH18 and EPS-LH33 are the same and have good thermal stability. The texture and rheological properties of L. helveticus LH18 fermented milk are significantly superior to other fermented milk. The reason is that L. helveticus LH18 EPS has the highest yield, which leads to a denser gel structure, lower surface hydrophobicity and free sulfhydryl content of its fermented milk. According to circular dichroism analysis, β- sheet and random coil are the internal factors leading to the difference in fermented milk gel. In addition, the fermented milk improved even more favorably as the concentration of the two EPS additions increased. As described above, L. helveticus LH18 has the potential to be an excellent yogurt starter, and both of the above EPS can be used as probiotic stabilizer alternatives for fermented dairy products.

Effect of compositions and physical properties on 3D printability of gels from selected commercial edible insects: Role of protein and chitin

Compositions and rheological properties of alternative protein sources, including honey bee pupa, grasshopper, cricket, earthworm, and scorpion, and their relationships with 3D printing behaviors were investigated. Protein was found to be the major composition in all insects, while chitin exhibited the most variation. At optimal moisture contents, honey bee pupa and earthworm gels displayed sufficient fluidity but resulted in unstable printed structures, as observed visually and microstructurally. Grasshopper and scorpion gels possessed weak fluidity but produced more stable printed structures. Cricket gel exhibited the most balanced flow behavior and self-supportability. Protein-to-chitin mass ratio proved to be a main factor affecting the 3D printing behavior of the gels. Possible mechanisms on how compositions and properties affected the printing behavior of the gels were proposed. Suggestions for improving the 3D printability of insect and invertebrate resembling insect gels were provided based on these proposed mechanisms.

Digestive characteristics of extracellular polysaccharide from Lactiplantibacillus plantarum T1 and its regulation of intestinal microbiota

This study assessed the potential prebiotic characteristics of the previously reported Lactiplantibacillus plantarum extracellular polysaccharide (EPS-T1) with immunological activity. EPS-T1 was a novel heteropolysaccharide composed of glucose and galactose (1.00:1.21), with a molecular weight of 1.41 × 106 Da. The monosaccharide composition, molecular weight, fourier transform infrared, and 1H NMR analysis showed that EPS-T1 was well tolerated in the simulated oral cavity, gastric fluid, and small intestinal fluid environments, and was not easily degraded. Meanwhile, EPS-T1 could effectively be used as a carbon source to promote the growth of beneficial Lactobacillus species (Lactobacillus delbrueckii ssp. Bulgaricus, Streptococcus thermophilus, Lacticaseibacillus rhamnose GG, Lactiplantibacillus plantarum, Lacticaseibacillus paracasei and Lactobacillus reuteri). After 24 h of fecal fermentation, EPS-T1(5 mg/mL) effectively reduced the relative abundance of harmful bacteria such as the Escherichia-Shigella, Citrobacter, Fusobacterium, Parasutterella, and Lachnoclostridium. While, the level content of beneficial flora (Bacteroides, Blautia, Phascolarctobacterium, Bifidobacterium, Parabacteroides, and Subdoligranulum) were significantly increased. In addition, EPS-T1 was able to significantly promote the enrichment of short-chain fatty acids such as acetic acid, propionic acid and butyric acid. These results provide some basis for the functional application of EPS-T1 as a potential prebiotic.