Applicability assessment of a real-time PCR assay for the specific detection of bovine, ovine and caprine material in feedstuffs

High resolution melting is a useful tool to detect animal species sources of various milk types

Accurate identification of animal species sources in milk have become quite important due to adulteration of high-priced milk types in the dairy industry. To date, milk identification methods have mainly depended on biochemical properties or physical properties detected by spectroscopic methods. The current study aimed to develop an easy to use and sensitive DNA-based High resolution melting (HRM) assay to identify animal species and detect cross-adulteration of water buffalo, bovine, goat, sheep, camel and donkey milks. HRM compatible designed primer set, targeted mitochondrial region, successfully amplified the specific targeted region for six animal species DNA and showed a high degree of specificity based on nucleotide variations. Capillary electrophoresis analysis validated the specific amplicons and determined the amplicon lengths as 114 bp for bovine, goat, sheep, and camel, 115 bp for water buffalo, and 121 bp for donkey. HRM analysis showed a clear discrimination for water buffalo-bovine, camel-bovine and donkey-bovine adulteration down to 0.5%, and goat-sheep adulteration down to 1% in the milk admixtures. The efficacy of the method was also confirmed by its standard curve with a very high correlation coefficient In conclusion, the designed HRM assay allows for the rapid, sensitive and cost-effective authentication of milk and dairy products.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05705-3.

Comparison of Real-Time PCR Quantification Methods in the Identification of Poultry Species in Meat Products

Poultry meat is consumed worldwide and is prone to food fraud because of large price differences among meat from different poultry species. Precise and sensitive analytical methods are necessary to control poultry meat products. We chose species-specific sequences of the cytochrome b gene to develop two multiplex real-time polymerase chain reaction (real-time PCR) systems: one for chicken (Gallus gallus), guinea fowl (Numida meleagris), and pheasant (Phasianus colchicus), and one for quail (Coturnix japonica) and turkey (Meleagris gallopavo). For each species, added meat could be detected down to 0.5 % w/w. No cross reactions were seen. For these two real-time PCR systems, we applied three different quantification methods: (A) with relative standard curves, (B) with matrix-specific multiplication factors, and (C) with an internal DNA reference sequence to normalize and to control inhibition. All three quantification methods had reasonable recovery rates from 43% to 173%. Method B had more accepted recovery rates, i.e., in the range 70-130%, namely 83% compared to 75% for method A or C.

Updated quantitative risk assessment (QRA) of the BSE risk posed by processed animal protein (PAP)

EFSA was requested: to assess the impact of a proposed quantitative real-time polymerase chain reaction (qPCR) 'technical zero' on the limit of detection of official controls for constituents of ruminant origin in feed, to review and update the 2011 QRA, and to estimate the cattle bovine spongiform encephalopathy (BSE) risk posed by the contamination of feed with BSE-infected bovine-derived processed animal protein (PAP), should pig PAP be re-authorised in poultry feed and vice versa, using both light microscopy and ruminant qPCR methods, and action limits of 100, 150, 200, 250 and 300 DNA copies. The current qPCR cannot discriminate between legitimately added bovine material and unauthorised contamination, or determine if any detected ruminant material is associated with BSE infectivity. The sensitivity of the surveillance for the detection of material of ruminant origin in feed is currently limited due to the heterogeneous distribution of the material, practicalities of sampling and test performance. A 'technical zero' will further reduce it. The updated model estimated a total BSE infectivity four times lower than that estimated in 2011, with less than one new case of BSE expected to arise each year. In the hypothetical scenario of a whole carcass of an infected cow entering the feed chain without any removal of specified risk material (SRM) or reduction of BSE infectivity via rendering, up to four new cases of BSE could be expected at the upper 95th percentile. A second model estimated that at least half of the feed containing material of ruminant origin will not be detected or removed from the feed chain, if an interpretation cut-off point of 100 DNA copies or more is applied. If the probability of a contaminated feed sample increased to 5%, with an interpretation cut-off point of 300 DNA copies, there would be a fourfold increase in the proportion of all produced feed that is contaminated but not detected.

Rapid bovine and caprine species identification in ruminant feeds by duplex real-time PCR melting curve analysis using EvaGreen fluorescence dye

A duplex real-time PCR assay with melting curve analysis, using the EvaGreen fluorescence dye, was developed for rapid and reliable identification of bovine and caprine in ruminant feeds. The method merges the use of bovine (Bos taurus) and caprine (Capra hircus) specific primers that amplify small fragments (bovine 96 bp and caprine 142 bp) of the mitochondrial 16S rRNA and 12S rRNA genes, respectively. DNA was isolated from heat-treated meats (133 °C/3 bar for 20 min) mixtures of bovine and caprine and was used to optimize the assay. Gene products of caprine and bovine produced two distinct melting peaks simultaneously at 82 and 86.8 °C, respectively. Duplex analysis of the reference samples showed that the detection limit of the assay was 0.003 % for bovine and 0.005 % for caprine species. The aim of this study was to develop a duplex real-time PCR assay followed by a melt curve step for sensitive, rapid, specific, and cost-effective detection of bovine and caprine species based on the amplicon melting peak in ruminant feeds to prevent Transmissible Spongiform Encephalopathies.

In silico and experimental evaluation of DNA-based detection methods for the ability to discriminate almond from other Prunus spp

Ten published DNA-based analytical methods aiming at detecting material of almond (Prunus dulcis) were in silico evaluated for potential cross-reactivity with other stone fruits (Prunus spp.), including peach, apricot, plum, cherry, sour cherry and Sargent cherry. For most assays, the analysis of nucleotide databases suggested none or insufficient discrimination of at least some stone fruits. On the other hand, the assay targeting non-specific lipid transfer protein (Röder et al., 2011, Anal Chim Acta 685:74-83) was sufficiently discriminative, judging from nucleotide alignments. Empirical evaluation was performed for three of the published methods, one modification of a commercial kit (SureFood allergen almond) and one attempted novel method targeting thaumatin-like protein gene. Samples of leaves and kernels were used in the experiments. The empirical results were favourable for the method from Röder et al. (2011) and a modification of SureFood allergen almond kit, both showing cross-reactivity <10(-3) compared to the model almond.

Detection of rabbit and hare processed material in compound feeds by TaqMan real-time PCR

Food and feed traceability has become a priority for governments due to consumer demand for comprehensive and integrated safety policies. In the present work, a TaqMan real-time PCR assay targeting the mitochondrial 12S rRNA gene was developed for specific detection of rabbit and hare material in animal feeds and pet foods. The technique is based on the use of three species-specific primer/probe detection systems targeting three 12S rRNA gene fragments: one from rabbit species, another one from hare species and a third fragment common to rabbit and hare (62, 102 and 75 bp length, respectively). A nuclear 18S rRNA PCR system, detecting a 77-bp amplicon, was used as positive amplification control. Assay performance and sensitivity were assessed through the analysis of a batch of laboratory-scale feeds treated at 133°C at 3 bar for 20 min to reproduce feed processing conditions dictated by European regulations. Successful detection of highly degraded rabbit and hare material was achieved at the lowest target concentration assayed (0.1%). Furthermore, the method was applied to 96 processed commercial pet food products to determine whether correct labelling had been used at the market level. The reported real-time PCR technique detected the presence of rabbit tissues in 80 of the 96 samples analysed (83.3%), indicating a possible labelling fraud in some pet foods. The real-time PCR method reported may be a useful tool for traceability purposes within the framework of feed control.

A fast and accurate method for controlling the correct labeling of products containing buffalo meat using High Resolution Melting (HRM) analysis

The substitution of high priced meat with low cost ones and the fraudulent labeling of meat products make the identification and traceability of meat species and their processed products in the food chain important. A polymerase chain reaction followed by a High Resolution Melting (HRM) analysis was developed for species specific detection of buffalo; it was applied in six commercial meat products. A pair of specific 12S and universal 18S rRNA primers were employed and yielded DNA fragments of 220bp and 77bp, respectively. All tested products were found to contain buffalo meat and presented melting curves with at least two visible inflection points derived from the amplicons of the 12S specific and 18S universal primers. The presence of buffalo meat in meat products and the adulteration of buffalo products with unknown species were established down to a level of 0.1%. HRM was proven to be a fast and accurate technique for authentication testing of meat products.

Sensitive detection of porcine DNA in processed animal proteins using a TaqMan real-time PCR assay

A TaqMan real-time PCR method was developed for specific detection of porcine-prohibited material in industrial feeds. The assay combines the use of a porcine-specific primer pair, which amplifies a 79 bp fragment of the mitochondrial (mt) 12 S rRNA gene, and a locked nucleic acid (LNA) TaqMan probe complementary to a target sequence lying between the porcine-specific primers. The nuclear 18 S rRNA gene system, yielding a 77 bp amplicon, was employed as a positive amplification control to monitor the total content of amplifiable DNA in the samples. The specificity of the porcine primers-probe system was verified against different animal and plant species, including mammals, birds and fish. The applicability of the real-time PCR protocol to detect the presence of porcine mt DNA in feeds was determined through the analysis of 190 industrial feeds (19 known reference and 171 blind samples) subjected to stringent processing treatments. The performance of the method allows qualitative and highly sensitive detection of short fragments from porcine DNA in all the industrial feeds declared to contain porcine material. Although the method has quantitative potential, the real quantitative capability of the assay is limited by the existing variability in terms of composition and processing conditions of the feeds, which affect the amount and quality of amplifiable DNA.