Prediction of Escherichia coli O157:H7 adhesion and potential to form biofilm under experimental conditions

Biological control of foodborne pathogens by lactic acid bacteria: A focus on juice processing industries

The use of lactic acid bacteria (LAB) in foods as biocontrol agents against foodborne pathogens has become increasingly known. Under the premise that controlling the adhesion of microorganisms to food contact surfaces is an essential step for meeting the goals of food processing, the aim of this work was to investigate the inhibitory and anti-biofilm effectiveness of Lactobacillus rhamnosus GG (ATCC 53103) and Lactobacillus casei (ATCC 393) against Escherichia coli O157:H7, Salmonella enterica and Listeria monocytogenes. Lactobacillus strains (108CFU/ml) and pathogens (104CFU/ml) were evaluated to monitor LAB anti-adhesive and antibiofilm effect, in two main scenarios: (i) co-adhesion and (ii) pathogen incorporation to stainless steel surfaces with a protective biofilm of Lactobacillus cells. In (i) the predominant effect was observed in L. rhamnosus against S. enterica and L. monocytogenes, whereas in (ii) both LAB significantly reduced the number of pathogenic adherent cells. The effect of pre-established LAB biofilms was more successful in displacing the three pathogens than when they were evaluated under co-adhesion. These findings show that both LAB can be considered good candidates to prevent or inhibit the adhesion and colonization of L. monocytogenes, S. enterica and E. coli O157:H7 on surfaces and conditions of relevance for juice processing industries, offering alternatives for improving the safety and quality of fruit-based products.

Modelling the Adhesion and Biofilm Formation Boundary of Listeria monocytogenes ST9

Listeria monocytogenes is a major foodborne pathogen that can adhere to or form a biofilm on food contact surfaces, depending on the environmental conditions. The purpose of this work is to determine the adhesion and biofilm formation boundaries for L. monocytogenes ST9 under the combination environments of temperature (5, 15, and 25 °C), NaCl concentration (0%, 3%, 6%, and 9% (w/v)) and pH (5.0, 6.0, 7.0, and 8.0). The probability models of adhesion and biofilm formation were built using the logistic regression. For adhesion, only the terms of linear T and NaCl are significant for L. monocytogenes ST9 (p < 0.05), whereas the terms of linear T, NaCl, and pH, and the interaction between T and pH were significant for biofilm formation (p < 0.05). By analyzing contour maps and their surface plots for two different states, we discovered that high temperature promoted adhesion and biofilm formation, whereas excessive NaCl concentration inhibited both of them. With a stringent threshold of 0.1667, the accuracy rate for identifying both adhesion/no-adhesion and biofilm formation/no-biofilm formation events were 0.929, indicating that the probability models are reasonably accurate in predicting the adhesion and biofilm formation boundary of L. monocytogenes ST9. The boundary model may provide a useful way for determining and further controlling L. monocytogenes adhesion and biofilm formation in various food processing environments.

Evaluation of Virulence Factors, Antibiotic Resistance, and Biofilm Formation of Escherichia coli Isolated from Milk and Dairy Products in Isfahan, Iran

Diarrheagenic E. coli (DEC) strains are important causes of gastrointestinal diseases worldwide, especially in developing countries. This study aimed to investigate the presence, antibiotic resistance, and potential biofilm formation in dairy products in Isfahan, Iran. A total of 200 samples, including traditional and pasteurized dairy products, were analyzed. In 200 samples, 54 E. coli isolates, including (48/110) and (6/90) positive samples of traditional and pasteurized dairy products, were detected. Furthermore, pathogenic strains were isolated from 30% of traditional dairy products and 5.55% of pasteurized dairy products. Most isolates were classified as enteropathogenic E. coli (EPEC). Moreover, antibiotic resistance was evaluated using the disk diffusion method for pathogenic E. coli. Overall, 73.68% of contaminated samples by pathogenic strains were resistant to at least one antibiotic. The highest resistance was observed against streptomycin (57.9%), followed by tetracycline (50%). Additionally, all isolates were sensitive to amikacin. For evaluating biofilm formation, the violet crystal assay was applied on a polystyrene microplate well for pathogenic isolates. In total, 68.42% of isolates were able to form biofilms. The presence of E. coli in dairy products indicates potential health risks for Iranian consumers. Serious measures are needed to control and prevent the spread of this pathogen.

Characterization of a New and Efficient Polyvalent Phage Infecting E. coli O157:H7, Salmonella spp., and Shigella sonnei

Ongoing outbreaks of foodborne diseases remain a significant public health concern. Lytic phages provide promising attributes as biocontrol agents. This study characterized KFS-EC3, a polyvalent and lytic phage, which was isolated from slaughterhouse sewage and purified by cesium chloride density centrifugation. Host range and efficiency of plating analyses revealed that KFS-EC3 is polyvalent and can efficiently infect E. coli O157:H7, Salmonella spp., and Shigella sonnei. KFS-EC3 had a latent time of 20 min and burst size of ~71 phages/infected cell. KFS-EC3 was stable and infectious following storage at a pH range of 3 to 11 and a temperature range of -70 °C to 60 °C. KFS-EC3 could inhibit E. coli O157:H7 growth by 2 logs up to 52 h even at the lowest MOI of 0.001. Genomic analysis of KFS-EC3 revealed that it consisted of 167,440 bp and 273 ORFs identified as functional genes, without any genes associated with antibiotic resistance, virulence, allergenicity, and lysogenicity. This phage was finally classified into the Tequatrovirus genus of the Myoviridae family. In conclusion, KFS-EC3 could simultaneously infect E. coli O157:H7, S. sonnei, and Salmonella spp. with the lowest MOI values over long periods, suggesting its suitability for simultaneous pathogen control in foods.

Antibiofilm Efficacy of Peptide 1018 against Listeria monocytogenes and Shiga Toxigenic Escherichia coli on Equipment Surfaces

Listeria monocytogenes and Shiga toxigenic Escherichia coli (STEC) are important foodborne bacterial pathogens that can form biofilms on equipment surfaces at food processing facilities. Pathogens in biofilms are resistant to conventional antimicrobials and require higher antimicrobial concentrations to be inactivated. In this study, the efficacy of a synthetic innate defense regulator peptide 1018 (peptide 1018) for inactivating L. monocytogenes and STEC (O26, O111, O145, O157) biofilms on stainless steel and polycarbonate surfaces was investigated. Stainless steel and polycarbonate coupons (12 mm in diameter) were used in a Centers for Disease Control and Prevention biofilm reactor containing 400 mL of 10% tryptic soy broth (TSB) that had been inoculated with an individual strain of L. monocytogenes or STEC to obtain 6 log CFU/mL populations. The reactor was set with a constant flow rate at 50 mL/h of 10% TSB for 48 h. After 48 h, coupons were treated with peptide 1018 at 0, 10, 20, or 50 μg/mL in phosphate buffer saline (PBS) for 24 h. Surviving bacterial populations were determined by scraping off the coupons and spiral plating on selective media. Significantly higher levels of pathogens in biofilms formed by certain bacterial strains, including L. monocytogenes F6854, E. coli O157:H7 RM4407 and NADC5713, and non-O157 E. coli NADC3629, were recovered on polycarbonate surfaces than on stainless steel. Antibiofilm efficacy of peptide 1018 against pathogens was concentration-dependent and varied with the type of pathogen and material surfaces. Peptide 1018 at 50 μg/mL significantly inactivated all tested bacterial biofilms on both surfaces compared with the PBS control (P < 0.05). L. monocytogenes was the bacterium most sensitive to peptide 1018; on stainless steel surfaces treated with 50 μg/mL peptide 1018, there was a 3.7- to 4.6-log CFU/cm² reduction in Listeria populations compared with a 1.0- to 3.5-log CFU/cm² reduction of STEC. Results suggest that peptide 1018 may be used to inactivate L. monocytogenes and STEC biofilms on equipment surfaces.

Escherichia coli attachment to model particulates: The effects of bacterial cell characteristics and particulate properties

E. coli bacteria move in streams freely in a planktonic state or attached to suspended particulates. Attachment is a dynamic process, and the fraction of attached microorganisms is thought to be affected by both bacterial characteristics and particulate properties. In this study, we investigated how the properties of cell surfaces and stream particulates influence attachment. Attachment assays were conducted for 77 E. coli strains and three model particulates (ferrihydrite, Ca-montmorillonite, or corn stover) under environmentally relevant conditions. Surface area, particle size distribution, and total carbon content were determined for each type of particulate. Among the three particulates, attachment fractions to corn stover were significantly larger than the attachments to 2-line ferrihydrite (p-value = 0.0036) and Ca-montmorillonite (p-value = 0.022). Furthermore, attachment to Ca-montmorillonite and corn stover was successfully modeled by a Generalized Additive Model (GAM) using cell characteristics as predictor variables. The natural logarithm of the net charge on the bacterial surface had a significant, positive, and linear impact on the attachment of E. coli bacteria to Ca-montmorillonite (p-value = 0.013), but it did not significantly impact the attachment to corn stover (p-value = 0.36). The large diversities in cell characteristics among 77 E. coli strains, particulate properties, and attachment fractions clearly demonstrated the inadequacy of using a static parameter or linear coefficient to predict the attachment behavior of E. coli in stream water quality models.

Frequency and risk-factors analysis of Escherichia coli O157:H7 in Bali-cattle

Cattle are known as the main reservoir of zoonotic agents verocytotoxin-producing Escherichia coli. These bacteria are usually isolated from calves with diarrhea and/or mucus and blood. Tolerance of these agents to the environmental conditions will strengthen of their transmission among livestock. A total of 238 cattle fecal samples from four sub-districts in Badung, Bali were used in this study. Epidemiological data observed include cattle age, sex, cattle rearing system, the source of drinking water, weather, altitude, and type of cage floor, the cleanliness of cage floor, the slope of cage floor, and the level of cattle cleanliness. The study was initiated by culturing of samples onto eosin methylene blue agar, then Gram stained, and tested for indole, methyl-red, voges proskauer, and citrate, Potential E.coli isolates were then cultured onto sorbitol MacConkey agar, and further tested using O157 latex agglutination test and H7 antisera. Molecular identification was performed by analysis of the 16S rRNA gene, and epidemiological data was analyzed using STATA 12.0 software. The results showed, the prevalence of E. coli O157:H7 in cattle at Badung regency was 6.30% (15/238) covering four sub districts i.e. Petang, Abiansemal, Mengwi, and Kuta which their prevalence was 8.62%(5/58), 10%(6/60), 3.33%(2/60), and 3.33(2/60)%, respectively. The analysis of 16S rRNA gene confirmed of isolates as an E. coli O157:H7 strain with 99% similarities. Furthermore, the risk factors analysis showed that the slope of the cage floor has a highly significant effect (P<0.05) to the distribution of infection. Consequently, implementing this factor must be concerned in order to decrease of infection.

Process optimization for high-pressure processing of black tiger shrimp ( Penaeus monodon) using response surface methodology

This study aims to investigate the effect of high-pressure processing on the quality of black tiger shrimp using response surface methodology. A central composite rotatable design was applied to evaluate the effects of three processing parameters, namely pressure (300-600 MPa), temperature (30-50 ℃), and time (0-15 min), on the inactivation rate of Staphylococcus aureus and physical properties (color and texture) of shrimp and to optimize the process conditions to achieve maximum bacterial inactivation with minimal changes in quality attributes. The results revealed that the processing conditions significantly affected the studied responses and the experimental data have been adequately fitted into a second-order polynomial model with multiple regression coefficients (R²) of 0.92, 0.92, and 0.94 for the inactivation rate of S. aureus, hardness, and color changes, respectively. The optimized conditions targeting minimum six log cycle reductions of S. aureus with moderate changes in quality attributes were obtained as: pressure, 361 MPa; time, 12 min and temperature, 46 ℃. The adequacy of the model equation for predicting the optimum response values was verified effectively by the validation data.

Use of Potential Probiotic Lactic Acid Bacteria (LAB) Biofilms for the Control of Listeria monocytogenes, Salmonella Typhimurium, and Escherichia coli O157:H7 Biofilms Formation

Use of probiotic biofilms can be an alternative approach for reducing the formation of pathogenic biofilms in food industries. The aims of this study were (i) to evaluate the probiotic properties of bacteriocinogenic (Lactococcus lactis VB69, L. lactis VB94, Lactobacillus sakei MBSa1, and Lactobacillus curvatus MBSa3) and non-bacteriocinogenic (L. lactis 368, Lactobacillus helveticus 354, Lactobacillus casei 40, and Weissela viridescens 113) lactic acid bacteria (LAB) isolated from Brazilian’s foods and (ii) to develop protective biofilms with these strains and test them for exclusion of Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella Typhimurium. LAB were tested for survival in acid and bile salt conditions, surface properties, biosurfactant production, β-galactosidase and gelatinase activity, antibiotic resistance and presence of virulence genes. Most strains survived exposure to pH 2 and 4% bile salts. The highest percentages of auto-aggregation were obtained after 24 h of incubation. Sixty-seven percentage auto-aggregation value was observed in W. viridescens 113 and Lactobacillus curvatus MBSa3 exhibited the highest co-aggregation (69% with Listeria monocytogenes and 74.6% with E. coli O157:H7), while the lowest co-aggregation was exhibited by W. viridescens 113 (53.4% with Listeria monocytogenes and 38% with E. coli O157:H7). Tests for hemolytic activity, bacterial cell adherence with xylene, and drop collapse confirmed the biosurfactant-producing ability of most strains. Only one strain (L. lactis 368) produced β-galactosidase. All strains were negative for virulence genes cob, ccf, cylLL, cylLs, cyllM, cylB, cylA and efaAfs and gelatinase production. The antibiotic susceptibility tests indicated that the MIC for ciprofloxacin, clindamycin, gentamicin, kanamycin, and streptomycin did not exceed the epidemiological cut-off suggested by the European Food Safety Authority. Some strains were resistant to one or more antibiotics and resistance to antibiotics was species and strain dependent. In the protective biofilm assays, strains L. lactis 368 (bac-), Lactobacillus curvatus MBSa3 (bac+), and Lactobacillus sakei MBSa1 (bac+) resulted in more than six log reductions in the pathogens counts when compared to the controls. This effect could not be attributed to bacteriocin production. These results suggest that these potential probiotic strains can be used as alternatives for control of biofilm formation by pathogenic bacteria in the food industry, without conferring a risk to the consumers.

Biofilm-Forming Abilities of Shiga Toxin-Producing Escherichia coli Isolates Associated with Human Infections

Forming biofilms may be a survival strategy of Shiga toxin-producing Escherichia coli to enable it to persist in the environment and the food industry. Here, we evaluate and characterize the biofilm-forming ability of 39 isolates of Shiga toxin-producing Escherichia coli isolates recovered from human infection and belonging to seropathotypes A, B, or C. The presence and/or production of biofilm factors such as curli, cellulose, autotransporter, and fimbriae were investigated. The polymeric matrix of these biofilms was analyzed by confocal microscopy and by enzymatic digestion. Cell viability and matrix integrity were examined after sanitizer treatments. Isolates of the seropathotype A (O157:H7 and O157:NM), which have the highest relative incidence of human infection, had a greater ability to form biofilms than isolates of seropathotype B or C. Seropathotype A isolates were unique in their ability to produce cellulose and poly-N-acetylglucosamine. The integrity of the biofilms was dependent on proteins. Two autotransporter genes, ehaB and espP, and two fimbrial genes, z1538 and lpf2, were identified as potential genetic determinants for biofilm formation. Interestingly, the ability of several isolates from seropathotype A to form biofilms was associated with their ability to agglutinate yeast in a mannose-independent manner. We consider this an unidentified biofilm-associated factor produced by those isolates. Treatment with sanitizers reduced the viability of Shiga toxin-producing Escherichia coli but did not completely remove the biofilm matrix. Overall, our data indicate that biofilm formation could contribute to the persistence of Shiga toxin-producing Escherichia coli and specifically seropathotype A isolates in the environment.

Immune-stimulating properties of 80% methanolic extract of Ludwigia octovalvis against Shiga toxin-producing E. coli O157:H7 in Balb/c mice following experimental infection

ETHNOPHARMACOLOGICAL RELEVANCE

Ludwigia octovalvis is an aquatic plant widely distributed throughout the tropical and sub-tropical regions. It is commonly consumed as a health drink and traditionally used for treating various ailments such as dysentery, diarrhea, diabetes, nephritisn and headache. No information is available on its in vivo antibacterial activity against an important foodborne pathogen, Shiga toxin producing Escherichia coli O157:H7.

MATERIALS AND METHODS

Male Balb/c mice were orally administered with the extract at doses of 200 or 400mg/kg body weight for one week before the infection with E. coli O157:H7 and continued for 14 consecutive days after infection. Serum antibody (IgA, IgG and IgM) levels were quantified at days 7 and 14 post-challenge by an ADVIA(®) 2400 Clinical Chemistry Auto Analyzer. Nitroblue tetrazolium (NBT) and Ceruloplasmin, as nonspecific immune parameters, were determined enzymatically.

RESULTS

A significant increase (p<0.05) in IgA serum level was indicated on the 7th day post-challenge with the pathogen in the experimental group received 400mg/kg of the extract in comparison with other groups. Total IgA serum levels on day 7 post-challenge in groups of PBS negative control, E. coli O157:H7 positive control, E. coli O157:H7+200mg/kg extract group and E. coli O157:H7+400mg/kg extract group were 709.4 ± 149.6, 1655.8 ± 139.7, 1728.6 ± 64.3 and 1971.4 ± 135.6 µg/ml, respectively. Serum IgG and IgM did not significantly change among different groups. The extract administered orally to infected Balb/c mice did not affect the NBT as well as ceruloplasmin levels.

CONCLUSIONS

The extract of L. octovalvis contains biologically active principles which increased systemic immune response to E. coli O157:H7 via potentiating the synthesis of IgA antibodies.

Electrochemical Genosensor To Detect Pathogenic Bacteria (Escherichia coli O157:H7) As Applied in Real Food Samples (Fresh Beef) To Improve Food Safety and Quality Control

The electrochemical genosensor is one of the most promising methods for the rapid and reliable detection of pathogenic bacteria. In a previous work, we performed an efficient electrochemical genosensor detection of Staphylococcus aureus by using lead sulfide nanoparticles (PbSNPs). As a continuation of this study, in the present work, the electrochemical genosensor was used to detect Escherichia coli O157:H7. The primer and probes were designed using NCBI database and Sigma-Aldrich primer and probe software. The capture and signalizing probes were modified by thiol (SH) and amine (NH2), respectively. Then, the signalizing probe was connected using cadmium sulfide nanoparticles (CdSNPs), which showed well-defined peaks after electrochemical detection. The genosensor was prepared by immobilization of complementary DNA on the gold electrode surface, which hybridizes with a specific fragment gene from pathogenic to make a sandwich structure. The conductivity and sensitivity of the sensor were increased by using multiwalled carbon nanotubes (MWCNT) that had been modified using chitosan deposited as a thin layer on the glass carbon electrode (GCE) surface, followed by a deposit of bismuth. The peak currents of E. coli O157:H7 correlated in a linear fashion with the concentration of tDNA. The detection limit was 1.97 × 10(-14) M, and the correlation coefficient was 0.989. A poorly defined current response was observed as the negative control and baseline. Our results showed high sensitivity and selectivity of the electrochemical DNA biosensor to the pathogenic bacteria E. coli O157:H7. The biosensor was also used to evaluate the detection of pathogen in real beef samples contaminated artificially. Compared with other electrochemical DNA biosensors, we conclude that this genosensor provides for very efficient detection of pathogenic bacteria. Therefore, this method may have potential application in food safety and related fields.

Unraveling microbial biofilms of importance for food microbiology

The presence of biofilms is a relevant risk factors in the food industry due to the potential contamination of food products with pathogenic and spoilage microorganisms. The majority of bacteria are able to adhere and to form biofilms, where they can persist and survive for days to weeks or even longer, depending on the microorganism and the environmental conditions. The biological cycle of biofilms includes several developmental phases such as: initial attachment, maturation, maintenance, and dispersal. Bacteria in biofilms are generally well protected against environmental stress, consequently, extremely difficult to eradicate and detect in food industry. In the present manuscript, some techniques and compounds used to control and to prevent the biofilm formation are presented and discussed. Moreover, a number of novel techniques have been recently employed to detect and evaluate bacteria attached to surfaces, including real-time polymerase chain reaction (PCR), DNA microarray and confocal laser scanning microscopy. Better knowledge on the architecture, physiology and molecular signaling in biofilms can contribute for preventing and controlling food-related spoilage and pathogenic bacteria. The present study highlights basic and applied concepts important for understanding the role of biofilms in bacterial survival, persistence and dissemination in food processing environments.

Relevance of biofilms in the pathogenesis of Shiga-toxin-producing Escherichia coli infection

The present study was designed to determine the relationships among biofilm formation, cellular stress and release of Shiga toxin (Stx) by three different clinical Shiga toxin-producing Escherichia coli (STEC) strains. The biofilm formation was determined using crystal violet stain in tryptic soy broth or thioglycollate medium with the addition of sugars (glucose or mannose) or hydrogen peroxide. The reactive oxygen species (ROSs) were detected by the reduction of nitro blue tetrazolium and reactive nitrogen intermediates (RNI) determined by the Griess assay. In addition, the activities of two antioxidant enzymes, superoxide dismutase (SOD) and catalase (CAT), were studied. For the cytotoxicity studies, Vero cells were cultured with Stx released of STEC biofilms. The addition of sugars in both culture mediums resulted in an increase in biofilm biomass, with a decrease in ROS and RNI production, low levels of SOD and CAT activity, and minimal cytotoxic effects. However, under stressful conditions, an important increase in the antioxidant enzyme activity and high level of Stx production were observed. The disturbance in the prooxidant-antioxidant balance and its effect on the production and release of Stx evaluated under different conditions of biofilm formation may contribute to a better understanding of the relevance of biofilms in the pathogenesis of STEC infection.