Rapid detection of Cronobacter sakazakii in dairy food by biofunctionalized magnetic nanoparticle based on nuclear magnetic resonance

Cronobacter Species in the Built Food Production Environment: A Review on Persistence, Pathogenicity, Regulation and Detection Methods

The powdered formula market is large and growing, with sales and manufacturing increasing by 120% between 2012 and 2021. With this growing market, there must come an increasing emphasis on maintaining a high standard of hygiene to ensure a safe product. In particular, Cronobacter species pose a risk to public health through their potential to cause severe illness in susceptible infants who consume contaminated powdered infant formula (PIF). Assessment of this risk is dependent on determining prevalence in PIF-producing factories, which can be challenging to measure with the heterogeneity observed in the design of built process facilities. There is also a potential risk of bacterial growth occurring during rehydration, given the observed persistence of Cronobacter in desiccated conditions. In addition, novel detection methods are emerging to effectively track and monitor Cronobacter species across the food chain. This review will explore the different vehicles that lead to Cronobacter species' environmental persistence in the food production environment, as well as their pathogenicity, detection methods and the regulatory framework surrounding PIF manufacturing that ensures a safe product for the global consumer.

Contamination-free V-shaped ultrafast reaction cascade transferase signal amplification driven CRISPR/Cas12a magnetic relaxation switching biosensor for bacteria detection

Foodborne pathogenic bacteria seriously endanger human health and must be rapidly identified for control. Magnetic relaxation switching biosensors (MRS) are ideal for rapid bacteria detection due to their high signal-to-noise ratio and immunity to sample matrix signal interference. However, conventional MRS still has some challenges in terms of sensitivity, specificity, and stability due to insufficient cross-linking or non-specific binding of magnetic nanoparticles (MNPs) to the target. To address these challenges, we firstly proposed a novel contamination-free uracil-DNA glycosylase (UDG) assisted V-shaped PCR driven CRISPR/Cas12a-MRS (UPC-MRS) biosensor, which combines contamination-free ultrafast nucleic acid amplification and powerful CRISPR/Cas12a system. It has an extremely specific quadruple signal guarantee realized by the merits of UDG anti-contamination, PCR primer specificity matching, the CRISPR/Cas12a system's precise recognition abilities, and magnetic probe signal unaffected by the sample matrix. As a cascade combined with original terminal deoxynucleotidyl transferase (Tdt)-mediated signal amplification technology, this platform can achieve Salmonella detection at concentrations as low as 53 CFU/mL, which is more sensitive than most existing MRS sensors, and it displays accuracy and applicability in real sample detection. This novel UPC-MRS biosensors avoid the common aerosol pollution problem of previous CRISPR/Cas12a systems which after combining with nucleic acid amplification, hence not only offers an alternative toolbox for Salmonella and other pathogen detection with satisfactory specificity and sensitivity, but also has potential for future applications across diverse fields.

Design, Preparation, and Application of Magnetic Nanoparticles for Food Safety Analysis: A Review of Recent Advances

This review (with 126 references) aims at providing an updated overview of the recent developments and innovations of the preparation and application of magnetic nanoparticles for food safety analysis. During the past two decades, various magnetic nanoparticles with different sizes, shapes, and surface modifications have been designed, synthesized, and characterized with the prospering development of material science. Analytical scientists and food scientists are among the ones who bring these novel materials from laboratories to commercial applications. Powerful and versatile surface functional groups and high surface to mass ratios make these magnetic nanoparticles useful tools for high-efficiency capture and preconcentration of certain molecules, even when they exist in trace levels or complicated food matrices. This is why more and more methods for sensitive detection and quantification of hazards in foods are developed based on these magic magnetic tools. In this review, the principles and superiorities of using magnetic nanoparticles for food pollutant analysis are first introduced, like the mechanism of magnetic solid phase extraction, a most commonly used method for food safety-related sample pretreatment. Their design and preparation are presented afterward, alongside the mechanisms underlying their application for different analytical purposes. After that, recently developed magnetic nanoparticle-based methods for dealing with food pollutants such as organic pollutants, heavy metals, and pathogens in different food matrices are summarized in detail. In the end, some humble outlooks on future directions for work in this field are provided.

Labchip-based diagnosis system for on-site application: Sensitive and easy-to-implement detection of single recoverable Cronobacter in infant formula without post-enrichment treatment

Microfluidic labchips have achieved much advancement in the molecular diagnosis of foodborne pathogens. Whereas difficulties in the flow control during the transportation of liquid fluids can occur and should be overcome. Manipulations of reaction temperature and the complex procedures from sample pre-treatment to analysis in a single chip device are major obstacles for the on-site application. Thus, the efficient temperature control of samples without any flow of reaction fluids in microfluidic channels of plastic chip and the simplest protocol omitting post-enrichment processing steps may overcome these limitations represented by the stability and the complexity, respectively. This study aims to develop a novel type of labchip and thermocycler specialized for the gene amplification in microfluidic channels and to evaluate the detectability by sensing the minimum recoverable level of Cronobacter in powdered infant formula (PIF). We developed a thermocycling device accelerating reactions through dual heating-blocks optimized to control temperatures of samples in microfluidic-channels by direct contact with labchip sequentially and repetitively. The structural design of microfluidic channels was to eliminate interference factors associated with the optical detection of fluorescent signals (without distortion due to air bubbles in the reaction chamber). To improve the applicability, a portable device and simplified operation to allow direct loading of samples in the chip without post-enrichment procedures were also adopted. Detection performance was evaluated by a sensitivity/specificity tests using 50 isolates of Cronobacter. Cross-reactivity tests for non-Cronobacter organisms and gDNA [human, raw materials of PIF (cow, soybean)] showed that there was no interference-factor causing false-positive results. In terms of the applied research conducted by using PIF, the enrichment of samples without broth medium (distilled water) displayed outstanding performance and 12 h of incubation facilitated detecting target at concentration as low as 1 CFU/300 g PIF (as initial contamination level) without post-enrichment treatment. Validation of the operation conditions using 30 commercial PIF products was also consistent. The present study presents a novel approach of microfluidic technology with perspective to not only the performance and the practicability [easy-to-implement protocol, portable materials, cost-effectiveness (the use of a miniaturized plastic chip requires a minimum level of materials)] for on-site diagnosis.

A magnetic relaxation switching and visual dual-mode sensor for selective detection of Hg2+ based on aptamers modified Au@Fe3O4 nanoparticles

The solvated mercuric ion (Hg²⁺) from industrial pollutants are highly toxic to the ecological environment and human health. Driven by urgent need for the selective and sensitive detection of Hg²⁺, a magnetic relaxation switching (MRS) based on Fe₃O₄ nanoparticles (NPs) was designed. Practically, the concentrations of Hg²⁺ in industrial pollutant is usually much higher than the detection range. Thus, gold nanoparticles (AuNPs) were synthesized on the surface of Fe₃O₄ NPs to enable the visual detection of Au@Fe₃O₄ NPs. The presence of Hg²⁺ in sample can specifically cause the aggregation of Au@Fe₃O₄-aptamers NPs through T-Hg²⁺-T base pairs, leading to the change in transverse relaxation time T₂ value of detection solution. The MRS sensor showed excellent response for Hg²⁺ ions in the range of 10 nM-100 nM and 100 nM to 5 μM. A highly sensitive and selective measurement of Hg²⁺ was obtained with a limit of detection of 2.7 nM. Noticeably, the visual detection can qualitatively analyze the Hg²⁺ beyond 5 μM by naked eye without advanced instrumentation and skilled operators.

A non-enzymatic electrochemical immunoassay for quantitative detection of Escherichia coli O157:H7 using Au@Pt and graphene

Herein, a non-enzymatic sandwich-type electrochemical immunoassay was fabricated for quantitative monitoring of Escherichia coli O157:H7 (E. coli O157:H7). Silica coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄@SiO₂) were modified with mouse anti-E. coli O157:H7 monoclonal antibody (Ab₁) to act as capture probes to reduce detection time and increase the sensitivity of the immunoassay. The Au@Pt nanoparticles were loaded on neutral red (NR) functionalized graphene to form composite complex rGO-NR-Au@Pt. rGO-NR-Au@Pt has high specific surface area and good biocompatibility. rGO-NR-Au@Pt was used as the carriers of detection antibodies (Ab₂). Au@Pt catalyzed the reduction of hydrogen peroxide (H₂O₂) to detection of E. coli O157:H7 with the thionine (TH) as electron mediator to effectually amply the current signal. Under the optimized conditions, a linear relationship between the reduction peak current change (ΔI_pc) and the logarithm of the E. coli O157:H7 concentration is obtained in the range from 4.0 × 10³ to 4.0 × 10⁸ CFU mL^-1 and the limit of detection (LOD) is 4.5 × 10² CFU mL^-1 at a signal-to-noise ratio of 3. The immunoassay exhibits acceptable specificity, reproducibility and stability on the detection of E. coli O157:H7. Furthermore, the immunoassay showed good performance in pork and milk samples. The results suggest that this immunoassay will be promising in the food safety area.

Nanotechnology: Review of concepts and potential application of sensing platforms in food safety

In recent years a number of new nanotechnology based platforms have been developed for detection of wide variety of targets including infectious agents, protein biomarkers, nucleic acids, drugs, and cancer cells. Nanomaterials such as magnetic nanoparticles, quantum dots, carbon nanotubes, nanowires, and nanosensors like giant magnetoresistance (GMR) sensors are used to quantitatively detect biomolecules with, experimentally, relatively good accuracy. There has been a growing interest in the use of magnetic fields in biosensing applications. Because biological samples have no ferromagnetic property and therefore there is no interference with complex sample matrix, detection of infectious agents from minimally processed samples is possible. Here, we provide a brief overview of the recent emergence of nanotechnology-based techniques for the detection and monitoring of foodborne diseases. In addition, the potential applications and future perspectives of nanotechnology on food safety are discussed. Ultimately, the review is expected to stimulate and provide directions to the development and application of nanotechnology-based tests for the early detection, and eventual control of foodborne diseases.

An electrochemical immunoassay for Escherichia coli O157:H7 using double functionalized Au@Pt/SiO2 nanocomposites and immune magnetic nanoparticles

A sensitive Point-of-Care Testing (POCT) with Au-Pt bimetallic nanoparticles (Au@Pt) functionalized silica nanoparticle (SiO₂ NPs) and Fe₃O₄ magnetic nanoparticles (Fe₃O₄ NPs) was designed for the quantitative detection of Escherichia coli O157:H7 (E. coli O157:H7). The poly-(4-styrenesulfonic acid-co-maleic acid) (PSSMA) as a negatively charged polyelectrolyte can be easily coated on surface of the amino group modified SiO₂ NPs via electrostatic force. PSSMA is also a good stabilizer for water-soluble bimetallic nanostructures. The PSSMA is first time used as a "bridge" to connect the negative charge Au@Pt NPs to the SiO₂ NPs, forming Au@Pt/SiO₂ NPs. Antibody and invertase conjugated Au@Pt/SiO₂ NPs (denoted as Ab/invertase-Au@Pt/SiO₂ NPs) were used as signal labels. Monoclonal antibody against E. coli O157:H7 (Ab) functionalized magnetic nanoparticles (denoted as Ab-Fe₃O₄@SiO₂ NPs) were used to enrich and capture the E. coli O157:H7 in positive sample. The immunosensing platform also composed of a personal glucometer (PGM) using for signal readout. Based on this sandwich-type immunoassay, the invertase in the final formed sandwich immunocomplex catalyzed the hydrolysis of sucrose to produce a large amount of glucose for quantitative readout by the PGM. Under optimal conditions, a linear relationship between the glucose concentration and the logarithm of E. coli O157:H7 concentration was obtained in the concentration range from 3.5 × 10² to 3.5 × 10⁸ CFU mL^-1 with a detection limit of 1.83 × 10² CFU mL^-1 (3σ). This method was used to detect E. coli O157:H7 in spiked milk samples, indicating its potential practical application. This protocol can be applied in various fields of study.

Recent advances in surface chemistry strategies for the fabrication of functional iron oxide based magnetic nanoparticles

The synthesis of superparamagnetic nanostructures, especially iron-oxide based nanoparticles (IONPs), with appropriate surface functional groups has been intensively researched for many high-technological applications, including high density data storage, biosensing and biomedicine. In medicine, IONPs are nowadays widely used as contrast agents for magnetic resonance imaging (MRI), in hyperthermia therapy, but are also exploited for drug and gene delivery, detoxification of biological fluids or immunoassays, as they are relatively non-toxic. The use of magnetic particles in vivo requires IONPs to have high magnetization values, diameters below 100 nm with overall narrow size distribution and long time stability in biological fluids. Due to the high surface energies of IONPs agglomeration over time is often encountered. It is thus of prime importance to modify their surface to prevent aggregation and to limit non-specific adsorption of biomolecules onto their surface. Such chemical modifications result in IONPs being well-dispersed and biocompatible, and allow for targeted delivery and specific interactions. The chemical nature of IONPs thus determines not only the overall size of the colloid, but also plays a significant role for in vivo and in vitro applications. This review discusses the different concepts currently used for the surface functionalization and coating of iron oxide nanoparticles. The diverse strategies for the covalent linking of drugs, proteins, enzymes, antibodies, and nucleotides will be discussed and the chemically relevant steps will be explained in detail.