Modeling the inactivation of Escherichia coli O157:H7 and Uropathogenic E. coli in ground beef by high pressure processing and citral

Mechanisms and Applications of Citral's Antimicrobial Properties in Food Preservation and Pharmaceuticals Formulations

Citral is a monoterpene constituted by two isomers known as neral and geranial. It is present in different plant sources and recognized as safe (GRAS) by the Food and Drug Administration (FDA). In recent years, investigations have demonstrated that this compound exhibited several biological activities, such as antibacterial, antifungal, antibiofilm, antiparasitic, antiproliferative, anti-inflammatory, and antioxidant properties, by in vitro and in vivo assays. Additionally, when incorporated into different food matrices, citral can reduce the microbial load of pathogenic microorganisms and extend the shelf life. This compound has acceptable drug-likeness properties and does not present any violations of Lipinski's rules, which could be used for drug development. The above shows that citral could be a compound of interest for developing food additives to extend the shelf life of animal and vegetable origin foods and develop pharmaceutical products.

Tunable Magneto-Plasmonic Nanosensor for Sensitive Detection of Foodborne Pathogens

Frequent outbreaks of food-borne pathogens, particularly E. coli O157:H7, continue to impact human health and the agricultural economy tremendously. The required cell count for this pathogenic strain of E. coli O157:H7 is relatively low and hence it is vital to detect at low colony forming unit (CFU) counts. Available detection methods, though sensitive, fall short in terms of timeliness and often require extensive sample processing. To overcome these limitations, we propose a novel magneto-plasmonic nanosensor (MPnS) by integrating surface plasmon resonance (SPR) properties with spin-spin magnetic relaxation (T2 MR) technology. We engineered MPnS by encapsulating several gold nanoparticles (GNPs) within the polymer-coating of iron oxide nanoparticles (IONPs). First, the polyacrylic acid (PAA)-coated IONPs were synthesized using a solvent precipitation method, then gold chloride solution was used to synthesize GNPs and encapsulate them within the PAA-coatings of IONPs in one step. A magnetic separation technique was used to purify the MPnS and the presence of GNPs within IONPs was characterized using transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS), and other spectroscopic methods. The synthesized MPnS exhibits MR relaxation properties while possessing amplified optical properties than conventional GNPs. This allows for rapid and ultrasensitive detection of E. coli O157:H7 by SPR, T2 MR, and colorimetric readout. Experiments conducted in simple buffer and in milk as a complex media demonstrated that our MPnS-based assay could detect as low as 10 CFUs of this pathogenic strain of E. coli O157:H7 in minutes with no cross-reactivity. Overall, the formulated MPnS is robust and holds great potential for the ultrasensitive detection of E. coli O157:H7 in a simple and timely fashion. Moreover, this platform is highly customizable and can be used for the detection of other foodborne pathogens.

Effect of Citral on the Thermal Inactivation of Escherichia coli O104:H4 in Ground Beef

ABSTRACT

The objective of the present study was to analyze the combined effect of heat treatment (55 to 62.5°C) and citral (0 to 3%) on the heat resistance of Escherichia coli O104:H4 inoculated into ground beef. Inoculated meat packages were immersed in a circulating water bath stabilized at 55, 57.5, 60, or 62.5°C for various times. The surviving microbial cells were counted after culture on tryptic soy agar. A factorial design (4 × 4) was used to analyze the effects and interaction of heat treatment and citral. Heat and citral promoted E. coli O104:H4 thermal inactivation, suggesting a synergistic effect. At 55°C, the incorporation of citral at 1, 2, and 3% decreased D-values (control = 42.75 min) by 85, 89, and 91%, respectively (P < 0.05). A citral concentration-dependent effect (P < 0.05) also was noted at other evaluated temperatures. These findings could be of value to the food industry for designing a safe thermal process for inactivating E. coli O104:H4 in ground beef under similar thermal inactivation conditions.

HIGHLIGHTS

Multitarget preservation technologies for chemical-free sustainable meat processing

Due to the growing consumer demand for safe and naturally processed meats, the meat industry is seeking novel methods to produce safe-to-consume meat products without affecting their sensory appeal. The green technologies can maintain the sensory and nutritive characteristics and ensure the microbial safety of processed meats and, therefore, can help to reduce the use of chemical preservatives in meat products. The use of chemical additives, especially nitrites in processed meat products, has become controversial because they may form carcinogenic N-nitrosamines, a few of which are suspected as cancer precursors. Thus, the objective of reducing or eliminating nitrite is of great interest to meat researchers and industries. This review, for the first time, discusses the influence of processing technologies such as microwave, irradiation, high-pressure thermal processing (HPTP) and multitarget preservation technology on the quality characteristics of processed meats, with a focus on their sensory quality. These emerging technologies can help in the alleviation of ingoing nitrite or formed nitrosamine contents in meat products. The multitarget preservation technology is an innovative way to enhance the shelf life of meat products through the combined use of different technologies/natural additives. The challenges and opportunities associated with the use of these technologies for processing meat are also reviewed.

Synergistic effect of high hydrostatic pressure, allyl isothiocyanate, and acetic acid on the inactivation and survival of pathogenic Escherichia coli in ground chicken

Meat and poultry are prone to contamination with foodborne pathogens sourced from the livestock or introduced from the processing environments. In this study, for retention of meat quality while assuring microbial food safety, mild levels of high hydrostatic pressure were hurdled with food-grade additives (i.e., allyl isothiocyanate [AITC] and acetic acid [AA], functioned as antimicrobials) to inactivate pathogenic Escherichia coli in ground chicken. The reductions of Shiga toxin-producing E. coli (STEC) O157:H7 and uropathogenic E. coli (UPEC) were described as a function of high hydrostatic pressure (200-350 MPa), process-holding time (10-25 min), AITC concentration (0.05-0.20% w/w), and AA concentration (0.10--0.30% w/w) using a full factorial design. The antimicrobials had little influence on bacterial inactivation without high pressure. Without the antimicrobials, a high-pressure treatment at 300 MPa and 4°C for 15 min reduced E. coli O157:H7 and UPEC by 1.52 and 2.52 log, respectively. A 5-log reduction was achieved when AITC and AA were combined with high pressure, indicating a synergistic effect. The survivors were further reduced to below the detection limit of 1 log CFU/g after subsequent storage tests at 4 and 10°C for 10 days. The STEC O157:H7 was found slightly more resistant than UPEC in our test matrix. The developed models showed good fits with experimental data (R²  > 0.95 for linear models; Pr > F (<0.0001) for dimensionless nonlinear models); which may help processors find/optimize the processing parameters to achieve target foodborne pathogens reduction for food safety requirement. PRACTICAL APPLICATION: Models were developed to predict the inactivation of pathogenic Escherichia coli in ground chicken by high-pressure processing (HPP) in combination with natural antimicrobial compounds. These models can be used to estimate/determine the HPP operation parameters and antimicrobial usage levels (i.e., allyl isothiocyanate and acetic acid) needed to achieve a specific microbial log reduction within the selected factor ranges. The operation parameters and clean-label ingredients are of interest in the food industry, which may benefit from the application of the models in achieving microbial safety, process optimization, and operation cost reduction.

Effect of plant-derived antimicrobials against multidrug-resistant Salmonella Heidelberg in ground Turkey

Salmonella Heidelberg (SH) is a highly invasive human pathogen for which turkeys can serve as reservoir hosts. Colonization of turkeys with SH may result in potential contamination and is a greater challenge to prevent in comminuted products. Antimicrobial efficacy of 3 GRAS-status plant-derived antimicrobials (PDAs), lemongrass essential oil (LG), citral (CIT), and trans-cinnamaldehyde (TC), against SH in ground turkey, a comminuted product implicated in several outbreaks, was evaluated in this study. Ground turkey samples inoculated with ∼3.50 log₁₀ CFU/g of a three-strain SH cocktail were treated with either LG, CIT, or TC at either 0.5, 1, or 2% (vol/wt). Samples were stored at 4°C, and bacterial enumeration was performed on d 0, 1, 3, and 5. Appropriate controls were included alongside all treatments. Fluorescence microscopy was performed to evaluate the direct impact of the PDAs against SH in vitro. Appearance and aroma difference testing of raw patties was also performed for select treatments with trained sensory panelists. Treatment with 2% TC yielded a 2.5 log₁₀ CFU/g reduction by d 1 and complete reduction by d 5 (P < 0.05). By d 3, 2% CIT and 2% LG resulted in SH reduction of at least 1.7 log₁₀ CFU/g (P < 0.05). Addition of 1% TC resulted in reduction of at least 1.8 log₁₀ CFU/g by d 3 (P < 0.05). Participants could distinguish PDA-treated raw patties by aroma. Most participants (7/11) could not distinguish patties treated with 0.5% TC based on appearance. Microscopic images indicate that all PDAs resulted in disruption of the SH membrane. Results of the present study indicate that the three tested PDAs, LG, CIT, and TC are effective against SH in ground turkey, indicating their potential use as interventions to mitigate Salmonella contamination in comminuted turkey products.

Aspects of high hydrostatic pressure food processing: Perspectives on technology and food safety

The last two decades saw a steady increase of high hydrostatic pressure (HHP) used for treatment of foods. Although the science of biomaterials exposed to high pressure started more than a century ago, there still seem to be a number of unanswered questions regarding safety of foods processed using HHP. This review gives an overview on historical development and fundamental aspects of HHP, as well as on potential risks associated with HHP food applications based on available literature. Beside the combination of pressure and temperature, as major factors impacting inactivation of vegetative bacterial cells, bacterial endospores, viruses, and parasites, factors, such as food matrix, water content, presence of dissolved substances, and pH value, also have significant influence on their inactivation by pressure. As a result, pressure treatment of foods should be considered for specific food groups and in accordance with their specific chemical and physical properties. The pressure necessary for inactivation of viruses is in many instances slightly lower than that for vegetative bacterial cells; however, data for food relevant human virus types are missing due to the lack of methods for determining their infectivity. Parasites can be inactivated by comparatively lower pressure than vegetative bacterial cells. The degrees to which chemical reactions progress under pressure treatments are different to those of conventional thermal processes, for example, HHP leads to lower amounts of acrylamide and furan. Additionally, the formation of new unknown or unexpected substances has not yet been observed. To date, no safety-relevant chemical changes have been described for foods treated by HHP. Based on existing sensitization to non-HHP-treated food, the allergenic potential of HHP-treated food is more likely to be equivalent to untreated food. Initial findings on changes in packaging materials under HHP have not yet been adequately supported by scientific data.

Sensitivity of wild-type and rifampicin-resistant O157 and non-O157 Shiga toxin-producing Escherichia coli to elevated hydrostatic pressure and lactic acid in ground meat and meat homogenate

Various serogroups of Shiga toxin-producing Escherichia coli have been epidemiologically associated with foodborne disease episodes in the United States and around the globe, with E. coli O157: H7 as the dominant serogroup of public health concern. Serogroups other than O157 are currently associated with about 60% of Shiga toxin-producing E. coli related foodborne illness episodes. Current study evaluated sensitivity of the O157 and epidemiologically important non-O157 serogroups of the pathogen to elevated hydrostatic pressure and 1% lactic acid. Pressure intensity of 250 to 650 MPa were applied for 0 to 7 min for inactivation of strain mixtures of wild-type and rifampicin-resistant E. coli O157, as well as O26, O45, O103, O111, O121, and O145 serogroups and ATCC® 43895™ strain in ground meat and 10% meat homogenate. E. coli O157 were reduced (p < 0.05) from 6.86 ± 0.2 to 4.56 ± 0.1 log CFU/g when exposed to pressure of 650 MPa for 7 min. Corresponding reductions (p < 0.05) for non-O157 E. coli were from 6.98 ± 0.3 to 4.72 ± 0.1. The D-values at 650 MPa were 3.71 and 3.47 min for O157 and non-O157 serogroups, respectively. Presence of 1% lactic acid to a great extent augmented (p < 0.05) decontamination efficacy of the treatment in meat homogenate resulting in up to 5.6 and 6.0 log CFU/mL reductions for O157 and non-O157 serogroups, respectively. Among the tested serogroups, the wild-type and rifampicin-resistant phenotypes exhibited (p ≥ 0.05) comparable pressure sensitivity. Thus, these two phenotypes could be used interchangeably in validation studies. Our results also illustrate that, application of elevated hydrostatic pressure could be utilized for assuring safety of ground and non-intact meat products against various serogroups of Shiga toxin-producing E. coli. Addition of 1% lactic acid additionally provided industrially appreciable augmentation in efficacy of the pressure-based treatments.

Modeling the effect of simultaneous use of allyl isothiocyanate and cinnamaldehyde on high hydrostatic pressure inactivation of Uropathogenic and Shiga toxin-producing Escherichia coli in ground chicken

BACKGROUND

A combination of high-pressure processing (HPP) and antimicrobials is a well-known approach for enhancing the microbiological safety of foods. However, few studies have applied multiple antimicrobials simultaneously with HPP, which could be an additional hurdle for microbial inactivation. The present study applied a full factorial design to investigate the impact of HPP (225-325 MPa; 10-20 min), allyl isothiocyanate (AITC) (0.3-0.9 g kg^-1 ) and trans-cinnamaldehyde (tCinn) (1.0-2.0 g kg^-1 ) on the inactivation of Shiga toxin-producing Escherichia coli (STEC) O157:H7 and uropathogenic E. coli (UPEC) in ground chicken meat.

RESULTS

The regulatory requirement of 5-log reduction was achieved at 305 MPa, 18 min, 0.8 g kg^-1 AITC and 1.7 g kg^-1 tCinn for STEC O157:H7 and at 293 MPa, 16 min, 0.6 g kg^-1 AITC and 1.6 g kg^-1 tCinn for UPEC, as specified by response surface analysis and verified via experiments. The surviving population was eliminated by post-treatment storage of 9 days at 10 °C. The developed linear regression models showed r²  > 0.9 for the E. coli inactivation. The developed dimensionless non-linear regression models covered a factorial range slightly wider than the original experimental limit, with probability P_r  > F (< 0.0001).

CONCLUSION

Simultaneous use of AITC and tCinn reduced not only the necessary concentration of each compound, but also the intensity of high-pressure treatments, at the same time achieving a similar level of microbial inactivation. STEC O157:H7 was found to be more resistant than UPEC to the HPP-AITC-tCinn stress. The developed models may be applied in commercial application to enhance the microbiological safety of ground chicken meat. Published 2020. This article is a U.S. Government work and is in the public domain in the USA.

Inactivation of Morganella morganii by high hydrostatic pressure combined with lemon essential oil

The inactivation and damage of histamine-forming bacterium, Morganella morganii, in phosphate buffer and tuna meat slurry by high hydrostatic pressure (HHP) alone or in combination with 0.2% lemon essential oil (LEO) treatments were studied using viability measurement and scanning electron microscopy (SEM). HHP alone or in combination with LEO treatments showed first-order destruction kinetics to M. morganii during pressure holding period. The D values of M. morganii (200 to 600 MPa) in phosphate buffer ranged from 16.4 to 0.08 min, whereas those in tuna meat slurry ranged from 51.0 to 0.10 min, respectively. M. morganii in tuna meat slurry had higher D values and were more resistant to HHP treatments than in phosphate buffer. In addition, the D values of HHP in combination with LEO treatment were lower than those of HHP treatment alone at <400 MPa of pressure, indicating that it is more effective to inactivate M. morganii under the same pressure. The results showed the M. morganii at HHP in combination with LEO treatment was more susceptible to pressure treatment alone. HHP with or without LEO treatments can be used to inactivate M. morganii by causing disruption to bacterial cell membrane and cell wall as demonstrated by SEM micrographs.

A Systematic Review of Beef Meat Quantitative Microbial Risk Assessment Models

Each year in Europe, meat is associated with 2.3 million foodborne illnesses, with a high contribution from beef meat. Many of these illnesses are attributed to pathogenic bacterial contamination and inadequate operations leading to growth and/or insufficient inactivation occurring along the whole farm-to-fork chain. To ensure consumer health, decision-making processes in food safety rely on Quantitative Microbiological Risk Assessment (QMRA) with many applications in recent decades. The present study aims to conduct a critical analysis of beef QMRAs and to identify future challenges. A systematic approach, the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, was used to collate beef QMRA models, identify steps of the farm-to-fork chain considered, and analyze inputs and outputs included as well as modelling methods. A total of 2343 articles were collected and 67 were selected. These studies focused mainly on western countries and considered Escherichia coli (EHEC) and Salmonella spp. pathogens. Future challenges were identified and included the need of whole-chain assessments, centralization of data collection processes, and improvement of model interoperability through harmonization. The present analysis can serve as a source of data and information to inform QMRA framework for beef meat and will help the scientific community and food safety authorities to identify specific monitoring and research needs.

Synergistic cranberry juice combinations with natural-borne antimicrobials for the eradication of uropathogenic Escherichia coli biofilm within a short time

Urinary tract infections (UTI), one of the most common diseases in humans, are caused primarily by uropathogenic Escherichia coli (UPEC). Cranberry juice (CB) is a widely known prophylaxis for UTI, but the treatment of CB alone could not effectively eradicate preformed UPEC biofilms. The aim of this study was to develop enforced CB composites within a short time by adding a small quantity of natural borne antimicrobials. UPEC biofilms (initial: 6·0 log CFU per cm² ), formed on silicone coupons in artificial urine medium, were exposed to CB (4-8%), caprylic acid (CAR; 0·025-0·05%) and thymol (TM; 0·025-0·05%) at 37°C for 1 min. Individual treatment of each compound did not show the significant antibacterial effect on UPEC biofilms (P > 0·05). Otherwise, the survivor counts of biofilms were synergistically reduced with CB containing any of the antimicrobials. For example combined treatment with CB (8%) + CAR (0·05%) + TM (0·05%) resulted in a 6 log reduction in UPEC populations in the biofilm (no detectable bacteria remained) with 4·6 log of synergistic bactericidal effect. The confocal laser scanning microscope images indicated that any composites including TM might result in biofilm detachment from the surface. The present method is cost-effective and more acceptable to consumers as it is based on the synergistic interaction of natural borne antimicrobials. The results of this study could be widely applicable in the functional food, medical and healthcare field. SIGNIFICANCE AND IMPACT OF THE STUDY: Anti-biofilm effect of cranberry juice (CB) has been focused mainly on inhibiting biofilm formation of uropathogenic Escherichia coli (UPEC); however, combined treatment with natural borne antimicrobials derived from coconut oil (caprylic acid) and oregano essential oil (thymol) could synergistically enhance its eradicating activity against biofilms. This study developed novel CB composites showing marked anti-biofilm effects (complete eradication of UPEC biofilms within just 1 min).

Modeling the Survival of Escherichia coli O157:H7 Under Hydrostatic Pressure, Process Temperature, Time and Allyl Isothiocyanate Stresses in Ground Chicken Meat

Shiga toxin-producing Escherichia coli O157:H7 (STEC) is a common contaminant in meat and poultry. We investigated the use of non-thermal high pressure processing (HPP), with or without allyl isothiocyanate (AITC) essential oil, to kill STEC in ground chicken meat. Temperature was found an important factor affecting the inactivation of STEC in addition to pressure and process time. A full factorial experiment design (4 factors × 2 levels) was used to facilitate and evaluate the effect of pressure (250–350 MPa), operation temperature (−15–4°C), AITC concentration (0.05–0.15%, w/w), and pressure-holding time (10–20 min) on the inactivation of STEC. A linear model (a polynomial equation) was developed to predict/describe those four parameters’ impact on E. coli O157:H7 survival (R² = 0.90), as well as a dimensionless non-linear model. Both types of models were validated with data obtained from separate experimental points. The dimensionless model also demonstrated that it may predict the lethality (defined as the log CFU/g reduction of STEC before and after treatment) reasonably well with some factors set slightly outside the design ranges (e.g., a wider application than the linear model). The results provide important information regarding STEC survival as affected by HPP (e.g., pressure, time and temperature) and AITC. With the addition of AITC, the hydrostatic pressure may be lowered to the 250–350 MPa level. Regulatory agencies and food industry may use those models for STEC risk assessment in ground chicken meat. A storage test (at 4 and 10°C, 10 days) after HPP+AITC treatment indicated that AITC may continue depressing or killing the pressure-damaged cells.

Lethality Prediction for Escherichia Coli O157:H7 and Uropathogenic E. coli in Ground Chicken Treated with High Pressure Processing and Trans-Cinnamaldehyde

Pathogenic Escherichia coli, intestinal (O157:H7) as well as extraintestinal types (for example, Uropathogenic E. coli [UPEC]) are commonly found in many foods including raw chicken meat. The resistance of E. coli O157:H7 to UPEC in chicken meat under the stresses of high hydrostatic Pressure (HHP, also known as HPP-high pressure processing) and trans-cinnamaldehyde (an essential oil) was investigated and compared. UPEC was found slightly less resistant than O157:H7 in our test parameter ranges. With the addition of trans-cinnamaldehyde as an antimicrobial to meat, HPP lethality enhanced both O157:H7 and UPEC inactivation. To facilitate the predictive model development, a central composite design (CCD) was used to assess the 3-parameter effects, that is, pressure (300 to 400 MPa), trans-cinnamaldehyde dose (0.2 to 0.5%, w/w), and pressure-holding time (15 to 25 min), on the inactivation of E. coli O157:H7 and UPEC in ground chicken. Linear models were developed to estimate the lethality of E. coli O157:H7 (R² = 0.86) and UPEC (R² = 0.85), as well as dimensionless nonlinear models. All models were validated with data obtained from separated CCD combinations. Because linear models of O157:H7 and UPEC had similar R² and the significant lethality difference of CCD points was only 9 in 20; all data were combined to generate models to include both O157:H7 and UPEC. The results provide useful information/tool to predict how pathogenic E. coli may survive HPP in the presence of trans-cinnamaldehyde and to achieve a great than 5 log CFU/g reduction in chicken meat. The models may be used for process optimization, product development and to assist the microbial risk assessment.

PRACTICAL APPLICATION

The study provided an effective means to reduce the high hydrostatic pressure level with incorporation of antimicrobial compound to achieve a 5-log reduction of pathogenic E. coli without damaging the raw meat quality. The developed models may be used to predict the high pressure processing lethality (and process optimization), product development (ingredient selection), and to assist the microbial risk assessment.

Escherichia coli biofilm formation and dispersion under hydrodynamic conditions on metal surfaces

The aim of this study was to analyze the impact of hydrodynamic forces on the multiplication of E. coli, and biofilm formation and dispersion. The experiments were provided in a flow chamber simulating a cleaning-in-place system. Biofilm biomass was measured using a crystal violet dye method. The results show that hydrodynamic forces affect not only biofilm formation and dispersion but the multiplication of E. coli in the first place. We found more biofilm biomass on the rough surface than on the smooth one. The results of the biofilm formation test show that laminar flow promotes the biofilm growth over 72 h, meanwhile turbulent flow after 48 h causes decrease in biomass. The results of the biofilm dispersion test, in contrast, show that laminar flow removed less biofilm from both materials that turbulent flow did. Therefore, taking into account these findings in cleaning-in-place technology can substantially reduce E. coli multiplication and biofilm formation.