Colorimetric and photographic detection of bacteria in drinking water by using 4-mercaptophenylboronic acid functionalized AuNPs

Chitosan-puerarin composite hydrogel with magnetic enhanced photothermal properties as sustained antimicrobial coatings for beef preservation

The bactericidal properties of traditional food coatings mostly depend on the amount of fungicides present, which reduces the sustainability of food packaging. Herein, we proposed a magnetic field to precisely modulate the near-infrared (NIR) absorption activity to enhance antimicrobial coatings sustainability. Inspired by the typical grinding procedure, the assembly of CP/Fe3O4@TA nanofiber hydrogel was proposed as the coating, applying mechanical force and encouraging the collision of effective molecules of puerarin (PUE), chitosan (CS), and Fe3O4@TA NFs. This hydrogel design offers precise control over the physical and chemical properties, including appearance, viscoelasticity, and rheology. Particularly, significant changes in photothermal performance were observed as a result of magnetic regulation of NIR absorption activity. As a result, the CP/Fe3O4@TA coatings achieve effective bacteria killing performance under NIR irradiation, magnetocaloric effect, boric acid adsorption, and aggregation interference. Finally, the hydrogel coating was applied to the beef surface and serves as an effective barrier against the growth of pathogenic bacteria, thereby preserving the freshness and tenderness of the beef. The finding from this work is expected to open up a new way in active nano hydrogel coating for food preservation.

Recent developments of (bio)-sensors for detection of main microbiological and non-biological pollutants in plastic bottled water samples: A critical review

The importance of water in all biological processes is undeniable. Ensuring access to clean and safe drinking water is crucial for maintaining sustainable water resources. To elaborate, the consumption of water of inadequate quality can have a repercussion on human health. Furthermore, according to the instability of tap water quality, the consumption rate of bottled water is increasing every day at the global level. Although most people believe bottled water is safe, it can also be contaminated by microbiological or chemical pollution, which can increase the risk of disease. Over the last decades, several conventional analytical tools applied to analyze the contamination of bottled water. On the other hand, some limitations restrict their application in this field. Therefore, biosensors, as emerging analytical method, attract tremendous attention for detection both microbial and chemical contamination of bottled water. Biosensors enjoy several facilities including selectivity, affordability, and sensitivity. In this review, the developed biosensors for analyzing contamination of bottled water were highlighted, as along with working strategies, pros and cons of studies. Challenges and prospects were also examined.

Novel Digital SERS-Microfluidic Chip for Rapid and Accurate Quantification of Microorganisms

In this work, we present a simple and novel digital surface-enhanced Raman spectroscopy (SERS)-microfluidic chip designed for the rapid and accurate quantitative detection of microorganisms. The chip employs a high-density inverted pyramid microcavity (IPM) array to separate and isolate microbial samples. The presence or absence of target microorganisms is determined by scanning the IPM array using SERS and identifying the characteristic Raman bands. This approach allows for the "digitization" of the SERS response of each IPM, enabling quantification through the application of mathematical statistical techniques. Significantly, precise quantitative detection of yeast was achieved within a concentration range of 106-109 cells/mL, with the maximum relative standard deviation from the concentration calibrated by the cultivation method being 5.6%. This innovative approach efficiently addresses the issue of irregularities in SERS quantitative detection, which arises due to fluctuations in SERS intensity and poor reproducibility. We strongly believe that this digital SERS-microfluidic chip holds immense potential for diverse applications in the rapid detection of various microorganisms, including pathogenic bacteria and viruses.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

Colorimetric Sensing of Gram-Negative and Gram-Positive Bacteria Using 4-Mercaptophenylboronic Acid-Functionalized Gold Nanoparticles in the Presence of Polyethylene Glycol

Gold nanoparticles (GNPs) have been used as detection probes for rapid and sensitive detection of various analytes, including bacteria. Here, we demonstrate a simple strategy for bacterial detection using GNPs functionalized with 4-mercaptophenylboronic acid (4-MPBA). 4-MPBA can interact with peptidoglycan or lipopolysaccharides present in bacterial organelles. After the addition of a high concentration of sodium hydroxide (NaOH), the functionalization of the surface of 50 nm GNPs with 4-MPBA (4-MPBA@GNPs) in the presence of polyethylene glycol results in a color change because of the aggregation of 4-MPBA@GNPs. This color change is dependent on the amount of bacteria present in the tested samples. Escherichia coli (E. coli) K-12 and Staphylococcus aureus (S. aureus) are used as Gram-negative and Gram-positive bacterial models, respectively. The color change can be detected within an hour by the naked eye. A linear relationship is observed between bacterial concentrations and the absorbance intensity at 533 nm; R ² values of 0.9152 and 0.8185 are obtained for E. coli K-12 and S. aureus, respectively. The limit of detection of E. coli K-12 is ∼2.38 × 10² CFU mL^-1 and that of S. aureus is ∼4.77 × 10³ CFU mL^-1. This study provides a promising approach for the rapid detection of target Gram-negative and Gram-positive bacteria.

Construction of multiple modes using gold nanoparticles as probes for the rapid detection of fenpyroximate

Herein, three patterns for the detection of fenpyroximate based on the response signal of gold nanoparticles are described. The strong interaction between the guanidine group of arginine-modified gold nanoparticles and the ester group of fenpyroximate led to the aggregation of the nanoparticles and to a variation of ultraviolet-visible light spectrum and color of the solution. Sensors were constructed based on the correlation of the concentration of fenpyroximate with the absorbance ratio (A₆₅₀/A₅₂₅) and the R value was obtained by extracting the color of the test solution by using a smartphone to take a photo of the solution, which was then analyzed by colorimeter software. The absorbance ratio increased linearly in the range of 0.225-0.375 mg L^-1 and the limit of detection was 0.215 mg L^-1, while the R value declined linearly in the range of 0.20-0.40 mg L^-1 and the limit of detection was 0.21 mg L^-1. Further, the gold nanoparticles could cause a fluorescence quenching of fluorescent dyes, such as rhodamine B, and it was found that the fluorescence could be quenched and then restored after aggregation; therefore, a fluorescence method based on fluorescence "off-on" was constructed, and the fluorescence quenching was found to increase linearly in the range of 0.0-1.0 mg L^-1 and the limit of detection was 0.013 mg L^-1. These three patterns indicated highly selective and sensitive response signals for fenpyroximate, and all were applied to the detection of fenpyroximate in apple juice, pear juice, and environmental water samples, with the results showing that the three methods could be mutually verified, with the recoveries ranging from 94.15% to 110.65%.

Single-Probe-Based Colorimetric and Photothermal Dual-Mode Identification of Multiple Bacteria

Effective identification of multiple pathogenic bacteria in unknown samples is important for disease prevention and control but remains a challenge yet. A single-mode array-based sensing approach is simple and sensitive, but it usually relies on the use of multiple cross-reactive receptors to construct sensor arrays, which is cumbersome and insufficiently accurate. Here, we developed a sensor array with colorimetric and photothermal dual mode of differentiating multiple pathogenic bacteria. The sensor array was based on boronic acid-functionalized Au-Fe₃O₄ nanoparticles (BA-GMNPs), which not only possess localized surface plasmon resonance properties, showing a burgundy color similar to that of AuNPs, but also exhibit mild superparamagnetism, allowing for the differentiation of bacteria before and after binding to the nanoparticles. Immobilization of BA-GMNPs on the bacterial cell surface by covalent bonding would diminish NaCl-induced assembly of BA-GMNPs. Different BA-GMNPs@bacterial complexes differed in their ability to resist assembly and produced different colorimetric and photothermal response signals. A unique molecular fingerprint of each bacterium was obtained by linear discriminant analysis of the response patterns, demonstrating an effective differentiation among the six species studied. Compared with single-mode sensing arrays based on multiple receptors, this method only requires the preparation of a single nanomaterial, which produces two signal outputs for the identification of multiple bacteria with better differentiation. It can distinguish not only multiple pathogenic bacteria but also Gram-negative and Gram-positive bacteria, and, more importantly, it can perform preliminary discrimination of unknown samples.

Rapid Detection of Lipopolysaccharide and Whole Cells of Francisella tularensis Based on Agglutination of Antibody-Coated Gold Nanoparticles and Colorimetric Registration

The paper presents development and characterization of a new bioanalytical test system for rapid detection of lipopolysaccharide (LPS) and whole cells of Francisella tularensis, a causative agent of tularemia, in water samples. Gold nanoparticles (AuNPs) coated by the obtained anti-LPS monoclonal antibodies were used for the assay. Their contact with antigen in tested samples leads to aggregation with a shift of absorption spectra from red to blue. Photometric measurements at 530 nm indicated the analyte presence. Three preparations of AuNPs with different diameters were compared, and the AuNPs having average diameter of 34 nm were found to be optimal. The assay is implemented in 20 min and is characterized by detection limits equal to 40 ng/mL for LPS and 3 × 10⁴ CFU/mL for whole cells of F. tularensis. Thus, the proposed simple one-step assay integrates sensitivity comparable with other immunoassay of microorganisms and rapidity. Selectivity of the assay for different strains of F. tularensis was tested and the possibility to choose its variants with the use of different antibodies to distinguish virulent and non-virulent strains or to detect both kinds of F. tularensis was found. The test system has been successfully implemented to reveal the analyte in natural and tap water samples without the loss of sensitivity.

Advances in metal graphitic nanocapsules for biomedicine

Metal graphitic nanocapsules have the advantages of both graphitic and metal nanomaterials, showing great promise in biomedicine. On one hand, the chemically inert graphitic shells are able to protect the metal core from external environments, quench the fluorescence signal from the biological system, offer robust platform for targeted molecules or drugs loading, and act as stable Raman labels or internal standard molecule. On the other hand, the metal cores with different compositions, sizes, and morphologies show unique physicochemical properties, and further broaden their biomedical functions. In this review, we firstly introduce the preparation, classification, and properties of metal graphitic nanocapsules, then summarize the recent progress of their applications in biodetection, bioimaging, and therapy. Challenges and their development prospects in biomedicine are eventually discussed in detail. We expect the versatile metal graphitic nanocapsules will advance the development of future clinical biomedicine.

Colorimetric Systems for the Detection of Bacterial Contamination: Strategy and Applications

Bacterial contamination is a public health concern worldwide causing enormous social and economic losses. For early diagnosis and adequate management to prevent or treat pathogen-related illnesses, extensive effort has been put into the development of pathogenic bacterial detection systems. Colorimetric sensing systems have attracted increasing attention due to their simple and single-site operation, rapid signal readout with the naked eye, ability to operate without external instruments, portability, compact design, and low cost. In this article, recent trends and advances in colorimetric systems for the detection and monitoring of bacterial contamination are reviewed. This article focuses on pathogen detection strategies and technologies based on reaction factors that affect the color change for visual readout. Reactions used in each strategy are introduced by dividing them into the following five categories: external pH change-induced pH indicator reactions, intracellular enzyme-catalyzed chromogenic reactions, enzyme-like nanoparticle (NP)-catalyzed substrate reactions, NP aggregation-based reactions, and NP accumulation-based reactions. Some recently developed colorimetric systems are introduced, and their challenges and strategies to improve the sensing performance are discussed.

Smartphone-based surface plasmon resonance sensing platform for rapid detection of bacteria

Bacterial infection poses severe threats to public health, and early rapid detection of the pathogen is critical for controlling bacterial infectious diseases. Current methods are commonly labor intensive, time consuming or dependent on lab-based equipment. In this study, we proposed a novel and practical method for bacterial detection based on smartphones using the surface plasmon resonance (SPR) phenomena of gold nanoparticles (AuNPs). The proposed smartphone-based SPR sensing method is achieved by utilizing color development that arises from the change in interparticle distance of AuNPs induced by bacterial lysate. The pictures of bacteria/AuNPs color development were captured, and their color signals were acquired through a commercial smartphone. The proposed method has a detection range between 2.44 × 10⁵ and 1.25 × 10⁸ cfu mL⁻¹ and a detection limit of 8.81 × 10⁴ cfu mL⁻¹. Furthermore, this method has acceptable recoveries (between 85.7% and 95.4%) when measuring spiked real waters. Combining smartphone-based signal reading with AuNP-dependent color development also offers the following advantages: easy-to-use, real-time detection, free of complex equipment and low cost. In view of these features, this sensing platform would have widespread applications in the fields of medical, food, and environmental sciences.

In this study, we propose a novel and practical method for bacterial detection based on smartphones using the surface plasmon resonance (SPR) phenomena of gold nanoparticles (AuNPs).

Rapid Detection of Gram-Positive and -Negative Bacteria in Water Samples Using Mannan-Binding Lectin-Based Visual Biosensor

Waterborne bacterial infection is a health threat worldwide, making accurate and timely bacteria detection crucial to prevent waterborne disease outbreaks. Inspired by the intrinsic capability of mannan-binding lectin (MBL) in recognizing the pathogen-associated molecular patterns (PAMPs), a visual biosensor is developed here for the on-site detection of both Gram-positive and -negative bacteria. The biosensor was synthesized by immobilization of the MBL protein onto the blue carboxyl-functionalized polystyrene microparticles (PSM), which is then used in a two-step assay to detect bacterial cells in water samples. The first step involved a 20 min incubation following the MBL-PSM and calcium chloride solution addition to the samples. The second step was to add ethanol to the resultant blue mixture and observe the color change with the naked eye after 15 min. The biosensor had a binary (all-or-none) response, which in the presence of bacterial cells kept its blue color, while in their absence the color changed from blue to colorless. Testing the water samples spiked with four Gram-negative bacteria including Acinetobacter baumannii, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa and two Gram-positive bacteria of Enterococcus faecalis and Staphylococcus aureus showed that the biosensor could detect all tested bacteria with a concentration as low as 10^1.5 CFU/ml. The performance of biosensor using the water samples from a water treatment plant also confirmed its capability to detect the pathogens in real-life water samples without the need for instrumentation.

Bio-Receptors Functionalized Nanoparticles: A Resourceful Sensing and Colorimetric Detection Tool for Pathogenic Bacteria and Microbial Biomolecules

Pathogenic bacteria and several biomolecules produced by cells and living organisms are common biological components posing a harmful threat to global health. Several studies have devised methods for the detection of varying pathogenic bacteria and biomolecules in different settings such as food, water, soil, among others. Some of the detection studies highlighting target pathogenic bacteria and biomolecules, mechanisms of detection, colorimetric outputs, and detection limits have been summarized in this review. In the last 2 decades, studies have harnessed various nanotechnology-based methods for the detection of pathogenic bacteria and biomolecules with much attention on functionalization techniques. This review considers the detection mechanisms, colorimetric prowess of bio-receptors and compares the reported detection efficiency for some bio-receptor functionalized nanoparticles. Some studies reported visual, rapid, and high-intensity colorimetric detection of pathogenic bacteria and biomolecules at a very low concentration of the analyte. Other studies reported slight colorimetric detection only with a large concentration of an analyte. The effectiveness of bio-receptor functionalized nanoparticles as detection component varies depending on their selectivity, specificity, and the binding interaction exhibited by nanoparticles, bio-receptor, and analytes to form a bio-sensing complex. It is however important to note that the colorimetric properties of some bio-receptor functionalized nanoparticles have shown strong and brilliant potential for real-time and visual-aided diagnostic results, not only to assess food and water quality but also for environmental monitoring of pathogenic bacteria and a wide array of biomolecules.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Rapid photothermal detection of foodborne pathogens based on the aggregation of MPBA-AuNPs induced by MPBA using a thermometer as a readout

Rapid and portable detection of foodborne pathogens is of great significance for food safety and public health. The colorimetric methods based on naked-eye have been demonstrated to be a suitable qualitative method for point-of-care testing (POCT). However, analytical instruments like a microplate reader must be needed for the quantitative assay. To overcome its limitation, we herein report a novel photothermal method for foodborne pathogens based on the photothermal effect of aggregated mercaptophenylboronic acid-functionalized AuNPs (MPBA-AuNPs) induced by MPBA to translate the colorimetric detection into a simple temperature measurement using thermometers as the readout. The aggregated AuNPs show higher photothermal conversion efficiency than well-separated AuNPs under 660 nm laser irradiation. In the presence of bacteria, MPBA-AuNPs will attach to the surface of bacteria and keep separated from aggregation induced by excess MPBA, resulting in a lower temperature increase under 660 nm laser irradiation. Using E. coli O157:H7 as a model target, a good linear relationship is observed between temperature increase and bacteria concentration from 1.00 × 10⁵-1.00 × 10⁹ cfu mL^-1 (R² = 0.9877) with a detection limit of 1.97 × 10⁴ cfu mL^-1, which is three orders of magnitude lower than of the MPBA-AuNPs-based colorimetric assays. The proposed photothermal method provided a universal platform for rapid and portable detection of broad-spectrum bacteria strains in real samples.

A simple colorimetric method for viable bacteria detection based on cell counting Kit-8

In this study, Cell Counting Kit-8 (CCK-8) was introduced to detect the concentration of live bacteria for the first time depending on the redox reaction between CCK-8 solution and dehydrogenase. CCK-8 solution can be reduced to form water soluble orange-yellow formazan by the dehydrogenase present in bacterial cells, and the concentration of live bacteria is proportional to the absorbance value of formazan at 450 nm. Based on this principle, Staphylococcus aureus and Escherichia coli were chosen as the model bacteria. The optimal detection conditions were investigated and a good linear relationship was obtained in the concentration range from 2.600 × 10² to 1.160 × 10⁹ CFU mL^-1 with a linear equation of Y = 0.06305 log₁₀ X-0.1153 (X in CFU mL^-1, R² = 0.9747) for S. aureus and 9.750 × 10² to 6.000 × 10⁸ CFU mL^-1 with a linear equation of Y = 0.06122 log₁₀ X-0.1358 (X in CFU mL^-1, R² = 0.9958) for E. coli. The CCK-8 based viable bacteria detection method can be completed within 2 h with a wide bacterial detection concentration range. Satisfactory results were obtained when applied to an actual sample analysis and there is a good consistency between the proposed CCK-8 based method and the traditional plate counting method. More importantly, this method can realize the one-time detection of a large number of samples with high sensitivity, which suggests its great potential in high-throughput bacterial detection.

A Simple and Sensitive Nanogold RRS/Abs Dimode Sensor for Trace As3+ Based on Aptamer Controlled Nitrogen Doped Carbon Dot Catalytic Amplification

Using citric acid (CA) and ethylenediamine (EDA) as precursors, stable nitrogen-doped carbon dots (CD) nanosols were prepared by microwave procedure and characterized in detail. It was found that CD_Ns catalyze ethanol (Et)-HAuCl₄ to generate gold nanoparticles (AuNPs), which have strong surface plasmon resonance, Rayleigh scattering, (RRS) and a surface plasmon resonance (SPR) absorption (Abs) effect at 370 nm and 575 nm, respectively. Compled the new catalytic amplification indicator reaction with the specific As³⁺ aptamer reaction, a new RRS/Abs dual-mode aptamer sensor for the assay of trace As³⁺ was developed, based on the RRS/Abs signals increasing linearly with As³⁺ increasing in the ranges of 5-250 nmol/L and 50-250 nmol/L, whose detection limits were 0.8 nmol/L and 3.4 nmol/L As³⁺, respectively. This analytical method has the advantages of high selectivity, simplicity, and rapidity, and it has been successfully applied to the detection of practical samples.

Nanomaterial application in bio/sensors for the detection of infectious diseases

Infectious diseases are a potential risk for public health and the global economy. Fast and accurate detection of the pathogens that cause these infections is important to avoid the transmission of the diseases. Conventional methods for the detection of these microorganisms are time-consuming, costly, and not applicable for on-site monitoring. Biosensors can provide a fast, reliable, and point of care diagnostic. Nanomaterials, due to their outstanding electrical, chemical, and optical features, have become key players in the area of biosensors. This review will cover different nanomaterials that employed in electrochemical, optical, and instrumental biosensors for infectious disease diagnosis and how these contributed to enhancing the sensitivity and rapidity of the various sensing platforms. Examples of nanomaterial synthesis methods as well as a comprehensive description of their properties are explained. Moreover, when available, comparative data, in the presence and absence of the nanomaterials, have been reported to further highlight how the usage of nanomaterials enhances the performances of the sensor.

Recent progress in the optical detection of pathogenic bacteria based on noble metal nanoparticles

Pathogenic bacteria have become a huge threat to social health and economy for their frighteningly infectious and lethal capacity. It is quite important to make a diagnosis in advance to prevent infection or allow a rapid treatment after infection. Noble metal nanoparticles, due to their unique physicochemical properties, especially optical properties, have drawn a great attention during the past decades and have been widely applied into all kinds of fields related to human health. By utilizing these noble metal nanoparticles, optical diagnosis platforms towards pathogenic bacteria have emerged continually, providing highly sensitive, selective, and particularly facile detection tools for clinic or point-of-care diagnosis. This review summarizes the recent development in this field. It begins with a brief introduction of pathogenic bacteria and noble metal nanoparticles. And then, optical detection methods are systematically discussed in three distinct aspects. In addition to these proof-of-concept methods, corresponding algorithms and point-of-care detection devices are also described. Finally, the review ends up with subjective views on present limitations and some appropriate advice for future research directions.

Pseudomonas fragi/graphene–gold hybrid nanomaterial bioanode based microbial fuel cell

A Pseudomonas fragi (P. fragi) and graphene–gold hybrid nanomaterial included a carbon felt electrode (graphene–Au/CFE) bioanode was developed and optimized.

A Microfluidic Biosensor Based on Magnetic Nanoparticle Separation, Quantum Dots Labeling and MnO2 Nanoflower Amplification for Rapid and Sensitive Detection of Salmonella Typhimurium

Screening of foodborne pathogens is an effective way to prevent microbial food poisoning. A microfluidic biosensor was developed for rapid and sensitive detection of Salmonella Typhimurium using quantum dots (QDs) as fluorescent probes for sensor readout and manganese dioxide nanoflowers (MnO2 NFs) and as QDs nanocarriers for signal amplification. Prior to testing, amino-modified MnO2 nanoflowers (MnO2-NH2 NFs) were conjugated with carboxyl-modified QDs through EDC/NHSS method to form MnO2-QD NFs, and MnO2-QD NFs were functionalized with polyclonal antibodies (pAbs) to form MnO2-QD-pAb NFs. First, the mixture of target Salmonella Typhimurium cells and magnetic nanoparticles (MNPs) modified with monoclonal antibodies (mAbs) was injected with MnO2-QD-pAb NFs into a microfluidic chip to form MNP-bacteria-QD-MnO2 complexes. Then, glutathione (GSH) was injected to dissolve MnO2 on the complexes into Mn2+, resulting in the release of QDs. Finally, fluorescent intensity of the released QDs was measured using the fluorescent detector to determine the amount of Salmonella. A linear relationship between fluorescent intensity and bacterial concentration from 1.0 × 102 to 1.0 × 107 CFU/mL was found with a low detection limit of 43 CFU/mL and mean recovery of 99.7% for Salmonella in spiked chicken meats, indicating the feasibility of this biosensor for practical applications.