The effect of water activity and temperature on the inactivation of Enterococcus faecium in peanut butter during superheated steam sanitation treatment

Evaluation of air impingement for dry-cleaning nonfat dry milk residues on a stainless-steel surface

The use of air jet impingement to remove residues from surfaces in food manufacturing operations offers an alternative to the use of water and liquid cleaning agents. During this investigation, air impingement was used to remove nonfat dry milk (NFDM) residues from a stainless-steel surface. The influence of the water activity (aw ) of the residue, the time after the residue reached an equilibrium water activity, and the thickness of residue at the time of removal from the surface have been investigated. All three factors had a significant effect on the time for removal. An increase in the water activity, the time at equilibrium, the sample thickness, or a combination of all three resulted in an increase in the time required to remove the deposits. Visible changes in the structure of deposits were observed as NFDM samples equilibrated to water activities above 0.43. NFDM residues with water activities less than 0.33 were removed within 1 s of using air impingement regardless of wall shear stress. When the water activities were greater than 0.50, the thickness of deposit was greater than 1 mm, and the time after reaching an equilibrium water activity was over 7 days, more than 5 min of air impingement with wall shear stress over 9.48 Pa was required to remove the residue. The results from these experiments indicated that air impingement has the potential to provide effective cleaning in manufacturing facilities for low-moisture foods. PRACTICAL APPLICATION: The introduction of water in low-moisture food environments is often undesirable due to the possibility of pathogenic microorganism growth. The normal cleaning operations in the food industry use water as a cleaning agent. This study evaluates the application of air impingement technology as a dry-cleaning method.

Practice and Progress: Updates on Outbreaks, Advances in Research, and Processing Technologies for Low-moisture Food Safety

Large, renowned outbreaks associated with low-moisture foods (LMFs) bring to light some of the potential, inherent risks that accompany foods with long shelf lives if pathogen contamination occurs. Subsequently, in 2013, Beuchat et al. (2013) noted the increased concern regarding these foods, specifically noting examples of persistence and resistance of pathogens in low-water activity foods (LWAFs), prevalence of pathogens in LWAF processing environments, and sources of and preventive measures for contamination of LWAFs. For the last decade, the body of knowledge related to LMF safety has exponentially expanded. This growing field and interest in LMF safety have led researchers to delve into survival and persistence studies, revealing that some foodborne pathogens can survive in LWAFs for months to years. Research has also uncovered many complications of working with foodborne pathogens in desiccated states, such as inoculation methods and molecular mechanisms that can impact pathogen survival and persistence. Moreover, outbreaks, recalls, and developments in LMF safety research have created a cascading feedback loop of pushing the field forward, which has also led to increased attention on how industry can improve LMF safety and raise safety standards. Scientists across academia, government agencies, and industry have partnered to develop and evaluate innovate thermal and nonthermal technologies to use on LMFs, which are described in the presented review. The objective of this review was to describe aspects of the extensive progress made by researchers and industry members in LMF safety, including lessons-learned about outbreaks and recalls, expansion of knowledge base about pathogens that contaminate LMFs, and mitigation strategies currently employed or in development to reduce food safety risks associated with LMFs.

Efficacy of Acidified Oils against Salmonella in Low-Moisture Environments

When processing low-moisture, high-fat foods such as peanut butter and nuts, water-based sanitization is unsuitable due to the immiscible nature of water and fats. Dry sanitization mainly uses flammable compounds such as isopropanol, requiring equipment cooling before application. The use of oils to deliver antimicrobials against foodborne pathogens enables the use of elevated temperatures, thus eliminating processing downtimes associated with dry sanitization. This study delivered organic acids and medium-chain fatty acids (100, 250, and 500 mM) in peanut oil against Salmonella enterica serovar Enteritidis desiccated at 75% relative humidity (RH). Acetic acid in peanut oil (AO) at 45°C was the most effective food-grade acid, causing a 4.4-log reduction in S. Enteritidis at 500 mM. AO caused cellular injury and was effective against a variety of S. Enteritidis strains. Confocal microscopy demonstrated that cells treated with 50 mM and 250 mM AO had significant membrane damage and reduced cellular respiration compared to untreated controls. Treatment efficacy increased with the increase in acid concentration, treatment duration, and treatment temperature from 20 to 45°C. Transmission electron microscopy after treatment with 100 and 250 mM AO revealed membrane ruffling and leakage in cell membranes, especially at 45°C. Reduction of the RH to 33% during desiccation of S. Enteritidis caused a decrease in AO efficacy compared to that at 75% RH, while at a higher RH of 90%, there was an increase in the efficacy of AO. Acidified oils can serve as robust, cost-effective replacements for dry-sanitation methods and improve safety of low moisture foods. IMPORTANCE Currently, dry sanitization products used during food processing often contain flammable compounds which require processing to stop and equipment to cool before application. This leads to processing downtimes and consequently, economic losses. This challenge is compounded by exposure to dryness which frequently renders Salmonella resistant to heat and different antimicrobials. Thus, the development of heat-tolerant oil-based antimicrobial compounds is a novel approach for sanitizing in low-moisture (dry) environments such as those found in peanut butter, tree nuts, and chocolate manufacturing. This study shows that acidified oils, especially acetic acid in peanut oil at elevated temperatures (45°C), was highly effective against desiccated Salmonella. Acidified oils have the potential to replace dry sanitizers, increasing the frequency of sanitization, leading to an improvement in food safety.

Superheated steam effectively inactivates diverse microbial targets despite mediating effects from food matrices in bench-scale assessments

Sanitation in dry food processing environments is challenging due to the exclusion of water. Superheated steam (SHS) is a novel sanitation technique that utilizes high temperature steam to inactivate microorganisms. The high sensible heat of SHS prevents condensation on surfaces. Here we evaluated SHS thermal inactivation of various vegetative and spore forming bacteria and fungi and determined the effect of food matrix composition on SHS efficacy. Capillary tubes with vegetative cells (Salmonella, E. coli O157:H7, Listeria monocytogenes, or Enterococcus faecium), Aspergillus fischeri ascospores, or B. cereus spores (100 μL) were SHS treated at 135 ± 1 °C for 1 or 2 s. After 1 s, SHS achieved a reduction of 10.91 ± 0.63 log₁₀ CFU/mL for vegetative cells, 2.09 ± 0.58 log₁₀ ascospores/mL for A. fischeri, and 0.21 ± 0.10 log₁₀ spores/mL for B. cereus. SHS treatment achieved significant reductions in vegetative cells and fungal ascospores (p < 0.05), however B. cereus spores were not significantly reduced after 2 s and were determined to be the most resistant of the cell types evaluated. Consequently, peanut butter compositions (peanut powder, oil, and water) and milk powder (whole and nonfat) inoculated with B. cereus spores on aluminum foil coupons (2 × 3 × 0.5 cm) were tested. The D_161°C values for B. cereus spores ranged from 46.53 ± 4.48 s (6 % fat, 55 % moisture, a_w: 0.927) to 79.21 ± 14.87 s (43 % fat, 10 % moisture, a_w: 0.771) for various peanut butter compositions. Whole milk powder had higher D_161°C (34.38 ± 20.90 s) than nonfat milk powder (24.73 ± 6.78 s). SHS (135 ± 1 °C) rapidly (1 s) inactivated most common vegetative bacterial cells; however B. cereus spores were more heat resistant. B. cereus spore inactivation was significantly affected by product composition (p < 0.05). Compared to the log-linear model (R² 0.81-0.97), the Weibull model had better fit (R² 0.94-0.99). Finally, the ease of peanut butter removal from surfaces increased while the ease of non-fat dry milk removal decreased with the increasing SHS treatment duration. However, allergen residues were detectable on surfaces regardless of SHS treatment. The findings from this study can inform the development of pilot-scale research on SHS.